Package support

* Service names, issue categories, and available severity levels. The
DescribeServices and DescribeSeverityLevels operations return AWS service
names, service codes, service categories, and problem severity levels.
You use these values when you call the CreateCase operation.

* Case creation, case details, and case resolution. The CreateCase, DescribeCases,
DescribeAttachment, and ResolveCase operations create AWS Support cases,
retrieve information about cases, and resolve cases.

* Case communication. The DescribeCommunications, AddCommunicationToCase,
and AddAttachmentsToSet operations retrieve and add communications and
attachments to AWS Support cases.

* DescribeTrustedAdvisorChecks returns the list of checks that run against
your AWS resources.

* Using the checkId for a specific check returned by DescribeTrustedAdvisorChecks,
you can call DescribeTrustedAdvisorCheckResult to obtain the results for
the check you specified.

* DescribeTrustedAdvisorCheckSummaries returns summarized results for
one or more Trusted Advisor checks.

* RefreshTrustedAdvisorCheck requests that Trusted Advisor rerun a specified
check.

* DescribeTrustedAdvisorCheckRefreshStatuses reports the refresh status
of one or more checks.

// Create a session to share configuration, and load external configuration.
sess := session.Must(session.NewSession())

// Create the service's client with the session.
svc := support.New(sess)

result, err := svc.AddAttachmentsToSet(params)
if err != nil {
    // Cast err to awserr.Error to handle specific error codes.
    aerr, ok := err.(awserr.Error)
    if ok && aerr.Code() == <error code to check for> {
        // Specific error code handling
    }
    return err
}

fmt.Println("AddAttachmentsToSet result:")
fmt.Println(result)

ctx := context.Background()

result, err := svc.AddAttachmentsToSetWithContext(ctx, params)

Constants

const (

    // ErrCodeAttachmentIdNotFound for service response error code
    // "AttachmentIdNotFound".
    //
    // An attachment with the specified ID could not be found.
    ErrCodeAttachmentIdNotFound = "AttachmentIdNotFound"

    // ErrCodeAttachmentLimitExceeded for service response error code
    // "AttachmentLimitExceeded".
    //
    // The limit for the number of attachment sets created in a short period of
    // time has been exceeded.
    ErrCodeAttachmentLimitExceeded = "AttachmentLimitExceeded"

    // ErrCodeAttachmentSetExpired for service response error code
    // "AttachmentSetExpired".
    //
    // The expiration time of the attachment set has passed. The set expires 1 hour
    // after it is created.
    ErrCodeAttachmentSetExpired = "AttachmentSetExpired"

    // ErrCodeAttachmentSetIdNotFound for service response error code
    // "AttachmentSetIdNotFound".
    //
    // An attachment set with the specified ID could not be found.
    ErrCodeAttachmentSetIdNotFound = "AttachmentSetIdNotFound"

    // ErrCodeAttachmentSetSizeLimitExceeded for service response error code
    // "AttachmentSetSizeLimitExceeded".
    //
    // A limit for the size of an attachment set has been exceeded. The limits are
    // 3 attachments and 5 MB per attachment.
    ErrCodeAttachmentSetSizeLimitExceeded = "AttachmentSetSizeLimitExceeded"

    // ErrCodeCaseCreationLimitExceeded for service response error code
    // "CaseCreationLimitExceeded".
    //
    // The case creation limit for the account has been exceeded.
    ErrCodeCaseCreationLimitExceeded = "CaseCreationLimitExceeded"

    // ErrCodeCaseIdNotFound for service response error code
    // "CaseIdNotFound".
    //
    // The requested caseId could not be located.
    ErrCodeCaseIdNotFound = "CaseIdNotFound"

    // ErrCodeDescribeAttachmentLimitExceeded for service response error code
    // "DescribeAttachmentLimitExceeded".
    //
    // The limit for the number of DescribeAttachment requests in a short period
    // of time has been exceeded.
    ErrCodeDescribeAttachmentLimitExceeded = "DescribeAttachmentLimitExceeded"

    // ErrCodeInternalServerError for service response error code
    // "InternalServerError".
    //
    // An internal server error occurred.
    ErrCodeInternalServerError = "InternalServerError"
)

Service information constants

const (
    ServiceName = "support"   // Service endpoint prefix API calls made to.
    EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

type AddAttachmentsToSetInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSetRequest

type AddAttachmentsToSetInput struct {

    // The ID of the attachment set. If an attachmentSetId is not specified, a new
    // attachment set is created, and the ID of the set is returned in the response.
    // If an attachmentSetId is specified, the attachments are added to the specified
    // set, if it exists.
    AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

    // One or more attachments to add to the set. The limit is 3 attachments per
    // set, and the size limit is 5 MB per attachment.
    //
    // Attachments is a required field
    Attachments []*Attachment `locationName:"attachments" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (AddAttachmentsToSetInput) GoString ¶

func (s AddAttachmentsToSetInput) GoString() string

GoString returns the string representation

func (*AddAttachmentsToSetInput) SetAttachmentSetId ¶

func (s *AddAttachmentsToSetInput) SetAttachmentSetId(v string) *AddAttachmentsToSetInput

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*AddAttachmentsToSetInput) SetAttachments ¶

func (s *AddAttachmentsToSetInput) SetAttachments(v []*Attachment) *AddAttachmentsToSetInput

SetAttachments sets the Attachments field's value.

func (AddAttachmentsToSetInput) String ¶

func (s AddAttachmentsToSetInput) String() string

String returns the string representation

func (*AddAttachmentsToSetInput) Validate ¶

func (s *AddAttachmentsToSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddAttachmentsToSetOutput ¶

The ID and expiry time of the attachment set returned by the AddAttachmentsToSet operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSetResponse

type AddAttachmentsToSetOutput struct {

    // The ID of the attachment set. If an attachmentSetId was not specified, a
    // new attachment set is created, and the ID of the set is returned in the response.
    // If an attachmentSetId was specified, the attachments are added to the specified
    // set, if it exists.
    AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

    // The time and date when the attachment set expires.
    ExpiryTime *string `locationName:"expiryTime" type:"string"`
    // contains filtered or unexported fields
}

func (AddAttachmentsToSetOutput) GoString ¶

func (s AddAttachmentsToSetOutput) GoString() string

GoString returns the string representation

func (*AddAttachmentsToSetOutput) SetAttachmentSetId ¶

func (s *AddAttachmentsToSetOutput) SetAttachmentSetId(v string) *AddAttachmentsToSetOutput

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*AddAttachmentsToSetOutput) SetExpiryTime ¶

func (s *AddAttachmentsToSetOutput) SetExpiryTime(v string) *AddAttachmentsToSetOutput

SetExpiryTime sets the ExpiryTime field's value.

func (AddAttachmentsToSetOutput) String ¶

func (s AddAttachmentsToSetOutput) String() string

String returns the string representation

type AddCommunicationToCaseInput ¶

To be written. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCaseRequest

type AddCommunicationToCaseInput struct {

    // The ID of a set of one or more attachments for the communication to add to
    // the case. Create the set by calling AddAttachmentsToSet
    AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

    // The AWS Support case ID requested or returned in the call. The case ID is
    // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
    CaseId *string `locationName:"caseId" type:"string"`

    // The email addresses in the CC line of an email to be added to the support
    // case.
    CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"`

    // The body of an email communication to add to the support case.
    //
    // CommunicationBody is a required field
    CommunicationBody *string `locationName:"communicationBody" min:"1" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AddCommunicationToCaseInput) GoString ¶

func (s AddCommunicationToCaseInput) GoString() string

GoString returns the string representation

func (*AddCommunicationToCaseInput) SetAttachmentSetId ¶

func (s *AddCommunicationToCaseInput) SetAttachmentSetId(v string) *AddCommunicationToCaseInput

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*AddCommunicationToCaseInput) SetCaseId ¶

func (s *AddCommunicationToCaseInput) SetCaseId(v string) *AddCommunicationToCaseInput

SetCaseId sets the CaseId field's value.

func (*AddCommunicationToCaseInput) SetCcEmailAddresses ¶

func (s *AddCommunicationToCaseInput) SetCcEmailAddresses(v []*string) *AddCommunicationToCaseInput

SetCcEmailAddresses sets the CcEmailAddresses field's value.

func (*AddCommunicationToCaseInput) SetCommunicationBody ¶

func (s *AddCommunicationToCaseInput) SetCommunicationBody(v string) *AddCommunicationToCaseInput

SetCommunicationBody sets the CommunicationBody field's value.

func (AddCommunicationToCaseInput) String ¶

func (s AddCommunicationToCaseInput) String() string

String returns the string representation

func (*AddCommunicationToCaseInput) Validate ¶

func (s *AddCommunicationToCaseInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddCommunicationToCaseOutput ¶

The result of the AddCommunicationToCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCaseResponse

type AddCommunicationToCaseOutput struct {

    // True if AddCommunicationToCase succeeds. Otherwise, returns an error.
    Result *bool `locationName:"result" type:"boolean"`
    // contains filtered or unexported fields
}

func (AddCommunicationToCaseOutput) GoString ¶

func (s AddCommunicationToCaseOutput) GoString() string

GoString returns the string representation

func (*AddCommunicationToCaseOutput) SetResult ¶

func (s *AddCommunicationToCaseOutput) SetResult(v bool) *AddCommunicationToCaseOutput

SetResult sets the Result field's value.

func (AddCommunicationToCaseOutput) String ¶

func (s AddCommunicationToCaseOutput) String() string

String returns the string representation

type Attachment ¶

An attachment to a case communication. The attachment consists of the file name and the content of the file. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Attachment

type Attachment struct {

    // The content of the attachment file.
    //
    // Data is automatically base64 encoded/decoded by the SDK.
    Data []byte `locationName:"data" type:"blob"`

    // The name of the attachment file.
    FileName *string `locationName:"fileName" type:"string"`
    // contains filtered or unexported fields
}

func (Attachment) GoString ¶

func (s Attachment) GoString() string

GoString returns the string representation

func (*Attachment) SetData ¶

func (s *Attachment) SetData(v []byte) *Attachment

SetData sets the Data field's value.

func (*Attachment) SetFileName ¶

func (s *Attachment) SetFileName(v string) *Attachment

SetFileName sets the FileName field's value.

func (Attachment) String ¶

func (s Attachment) String() string

String returns the string representation

type AttachmentDetails ¶

The file name and ID of an attachment to a case communication. You can use the ID to retrieve the attachment with the DescribeAttachment operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AttachmentDetails

type AttachmentDetails struct {

    // The ID of the attachment.
    AttachmentId *string `locationName:"attachmentId" type:"string"`

    // The file name of the attachment.
    FileName *string `locationName:"fileName" type:"string"`
    // contains filtered or unexported fields
}

func (AttachmentDetails) GoString ¶

func (s AttachmentDetails) GoString() string

GoString returns the string representation

func (*AttachmentDetails) SetAttachmentId ¶

func (s *AttachmentDetails) SetAttachmentId(v string) *AttachmentDetails

SetAttachmentId sets the AttachmentId field's value.

func (*AttachmentDetails) SetFileName ¶

func (s *AttachmentDetails) SetFileName(v string) *AttachmentDetails

SetFileName sets the FileName field's value.

func (AttachmentDetails) String ¶

func (s AttachmentDetails) String() string

String returns the string representation

type CaseDetails ¶

A JSON-formatted object that contains the metadata for a support case. It is contained the response from a DescribeCases request. CaseDetails contains the following fields:

* caseId. The AWS Support case ID requested or returned in the call. The
case ID is an alphanumeric string formatted as shown in this example:
case-12345678910-2013-c4c1d2bf33c5cf47.

* categoryCode. The category of problem for the AWS Support case. Corresponds
to the CategoryCode values returned by a call to DescribeServices.

* displayId. The identifier for the case on pages in the AWS Support Center.

* language. The ISO 639-1 code for the language in which AWS provides
support. AWS Support currently supports English ("en") and Japanese ("ja").
Language parameters must be passed explicitly for operations that take
them.

* recentCommunications. One or more Communication objects. Fields of these
objects are attachments, body, caseId, submittedBy, and timeCreated.

* nextToken. A resumption point for pagination.

* serviceCode. The identifier for the AWS service that corresponds to
the service code defined in the call to DescribeServices.

* severityCode. The severity code assigned to the case. Contains one of
the values returned by the call to DescribeSeverityLevels.

* status. The status of the case in the AWS Support Center.

* subject. The subject line of the case.

* submittedBy. The email address of the account that submitted the case.

* timeCreated. The time the case was created, in ISO-8601 format.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CaseDetails

type CaseDetails struct {

    // The AWS Support case ID requested or returned in the call. The case ID is
    // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
    CaseId *string `locationName:"caseId" type:"string"`

    // The category of problem for the AWS Support case.
    CategoryCode *string `locationName:"categoryCode" type:"string"`

    // The email addresses that receive copies of communication about the case.
    CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"`

    // The ID displayed for the case in the AWS Support Center. This is a numeric
    // string.
    DisplayId *string `locationName:"displayId" type:"string"`

    // The ISO 639-1 code for the language in which AWS provides support. AWS Support
    // currently supports English ("en") and Japanese ("ja"). Language parameters
    // must be passed explicitly for operations that take them.
    Language *string `locationName:"language" type:"string"`

    // The five most recent communications between you and AWS Support Center, including
    // the IDs of any attachments to the communications. Also includes a nextToken
    // that you can use to retrieve earlier communications.
    RecentCommunications *RecentCaseCommunications `locationName:"recentCommunications" type:"structure"`

    // The code for the AWS service returned by the call to DescribeServices.
    ServiceCode *string `locationName:"serviceCode" type:"string"`

    // The code for the severity level returned by the call to DescribeSeverityLevels.
    SeverityCode *string `locationName:"severityCode" type:"string"`

    // The status of the case.
    Status *string `locationName:"status" type:"string"`

    // The subject line for the case in the AWS Support Center.
    Subject *string `locationName:"subject" type:"string"`

    // The email address of the account that submitted the case.
    SubmittedBy *string `locationName:"submittedBy" type:"string"`

    // The time that the case was case created in the AWS Support Center.
    TimeCreated *string `locationName:"timeCreated" type:"string"`
    // contains filtered or unexported fields
}

func (CaseDetails) GoString ¶

func (s CaseDetails) GoString() string

GoString returns the string representation

func (*CaseDetails) SetCaseId ¶

func (s *CaseDetails) SetCaseId(v string) *CaseDetails

SetCaseId sets the CaseId field's value.

func (*CaseDetails) SetCategoryCode ¶

func (s *CaseDetails) SetCategoryCode(v string) *CaseDetails

SetCategoryCode sets the CategoryCode field's value.

func (*CaseDetails) SetCcEmailAddresses ¶

func (s *CaseDetails) SetCcEmailAddresses(v []*string) *CaseDetails

SetCcEmailAddresses sets the CcEmailAddresses field's value.

func (*CaseDetails) SetDisplayId ¶

func (s *CaseDetails) SetDisplayId(v string) *CaseDetails

SetDisplayId sets the DisplayId field's value.

func (*CaseDetails) SetLanguage ¶

func (s *CaseDetails) SetLanguage(v string) *CaseDetails

SetLanguage sets the Language field's value.

func (*CaseDetails) SetRecentCommunications ¶

func (s *CaseDetails) SetRecentCommunications(v *RecentCaseCommunications) *CaseDetails

SetRecentCommunications sets the RecentCommunications field's value.

func (*CaseDetails) SetServiceCode ¶

func (s *CaseDetails) SetServiceCode(v string) *CaseDetails

SetServiceCode sets the ServiceCode field's value.

func (*CaseDetails) SetSeverityCode ¶

func (s *CaseDetails) SetSeverityCode(v string) *CaseDetails

SetSeverityCode sets the SeverityCode field's value.

func (*CaseDetails) SetStatus ¶

func (s *CaseDetails) SetStatus(v string) *CaseDetails

SetStatus sets the Status field's value.

func (*CaseDetails) SetSubject ¶

func (s *CaseDetails) SetSubject(v string) *CaseDetails

SetSubject sets the Subject field's value.

func (*CaseDetails) SetSubmittedBy ¶

func (s *CaseDetails) SetSubmittedBy(v string) *CaseDetails

SetSubmittedBy sets the SubmittedBy field's value.

func (*CaseDetails) SetTimeCreated ¶

func (s *CaseDetails) SetTimeCreated(v string) *CaseDetails

SetTimeCreated sets the TimeCreated field's value.

func (CaseDetails) String ¶

func (s CaseDetails) String() string

String returns the string representation

type Category ¶

A JSON-formatted name/value pair that represents the category name and category code of the problem, selected from the DescribeServices response for each AWS service. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Category

type Category struct {

    // The category code for the support case.
    Code *string `locationName:"code" type:"string"`

    // The category name for the support case.
    Name *string `locationName:"name" type:"string"`
    // contains filtered or unexported fields
}

func (Category) GoString ¶

func (s Category) GoString() string

GoString returns the string representation

func (*Category) SetCode ¶

func (s *Category) SetCode(v string) *Category

SetCode sets the Code field's value.

func (*Category) SetName ¶

func (s *Category) SetName(v string) *Category

SetName sets the Name field's value.

func (Category) String ¶

func (s Category) String() string

String returns the string representation

type Communication ¶

A communication associated with an AWS Support case. The communication consists of the case ID, the message body, attachment information, the account email address, and the date and time of the communication. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Communication

type Communication struct {

    // Information about the attachments to the case communication.
    AttachmentSet []*AttachmentDetails `locationName:"attachmentSet" type:"list"`

    // The text of the communication between the customer and AWS Support.
    Body *string `locationName:"body" min:"1" type:"string"`

    // The AWS Support case ID requested or returned in the call. The case ID is
    // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
    CaseId *string `locationName:"caseId" type:"string"`

    // The email address of the account that submitted the AWS Support case.
    SubmittedBy *string `locationName:"submittedBy" type:"string"`

    // The time the communication was created.
    TimeCreated *string `locationName:"timeCreated" type:"string"`
    // contains filtered or unexported fields
}

func (Communication) GoString ¶

func (s Communication) GoString() string

GoString returns the string representation

func (*Communication) SetAttachmentSet ¶

func (s *Communication) SetAttachmentSet(v []*AttachmentDetails) *Communication

SetAttachmentSet sets the AttachmentSet field's value.

func (*Communication) SetBody ¶

func (s *Communication) SetBody(v string) *Communication

SetBody sets the Body field's value.

func (*Communication) SetCaseId ¶

func (s *Communication) SetCaseId(v string) *Communication

SetCaseId sets the CaseId field's value.

func (*Communication) SetSubmittedBy ¶

func (s *Communication) SetSubmittedBy(v string) *Communication

SetSubmittedBy sets the SubmittedBy field's value.

func (*Communication) SetTimeCreated ¶

func (s *Communication) SetTimeCreated(v string) *Communication

SetTimeCreated sets the TimeCreated field's value.

func (Communication) String ¶

func (s Communication) String() string

String returns the string representation

type CreateCaseInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCaseRequest

type CreateCaseInput struct {

    // The ID of a set of one or more attachments for the case. Create the set by
    // using AddAttachmentsToSet.
    AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

    // The category of problem for the AWS Support case.
    CategoryCode *string `locationName:"categoryCode" type:"string"`

    // A list of email addresses that AWS Support copies on case correspondence.
    CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"`

    // The communication body text when you create an AWS Support case by calling
    // CreateCase.
    //
    // CommunicationBody is a required field
    CommunicationBody *string `locationName:"communicationBody" min:"1" type:"string" required:"true"`

    // The type of issue for the case. You can specify either "customer-service"
    // or "technical." If you do not indicate a value, the default is "technical."
    IssueType *string `locationName:"issueType" type:"string"`

    // The ISO 639-1 code for the language in which AWS provides support. AWS Support
    // currently supports English ("en") and Japanese ("ja"). Language parameters
    // must be passed explicitly for operations that take them.
    Language *string `locationName:"language" type:"string"`

    // The code for the AWS service returned by the call to DescribeServices.
    ServiceCode *string `locationName:"serviceCode" type:"string"`

    // The code for the severity level returned by the call to DescribeSeverityLevels.
    //
    // The availability of severity levels depends on each customer's support subscription.
    // In other words, your subscription may not necessarily require the urgent
    // level of response time.
    SeverityCode *string `locationName:"severityCode" type:"string"`

    // The title of the AWS Support case.
    //
    // Subject is a required field
    Subject *string `locationName:"subject" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CreateCaseInput) GoString ¶

func (s CreateCaseInput) GoString() string

GoString returns the string representation

func (*CreateCaseInput) SetAttachmentSetId ¶

func (s *CreateCaseInput) SetAttachmentSetId(v string) *CreateCaseInput

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*CreateCaseInput) SetCategoryCode ¶

func (s *CreateCaseInput) SetCategoryCode(v string) *CreateCaseInput

SetCategoryCode sets the CategoryCode field's value.

func (*CreateCaseInput) SetCcEmailAddresses ¶

func (s *CreateCaseInput) SetCcEmailAddresses(v []*string) *CreateCaseInput

SetCcEmailAddresses sets the CcEmailAddresses field's value.

func (*CreateCaseInput) SetCommunicationBody ¶

func (s *CreateCaseInput) SetCommunicationBody(v string) *CreateCaseInput

SetCommunicationBody sets the CommunicationBody field's value.

func (*CreateCaseInput) SetIssueType ¶

func (s *CreateCaseInput) SetIssueType(v string) *CreateCaseInput

SetIssueType sets the IssueType field's value.

func (*CreateCaseInput) SetLanguage ¶

func (s *CreateCaseInput) SetLanguage(v string) *CreateCaseInput

SetLanguage sets the Language field's value.

func (*CreateCaseInput) SetServiceCode ¶

func (s *CreateCaseInput) SetServiceCode(v string) *CreateCaseInput

SetServiceCode sets the ServiceCode field's value.

func (*CreateCaseInput) SetSeverityCode ¶

func (s *CreateCaseInput) SetSeverityCode(v string) *CreateCaseInput

SetSeverityCode sets the SeverityCode field's value.

func (*CreateCaseInput) SetSubject ¶

func (s *CreateCaseInput) SetSubject(v string) *CreateCaseInput

SetSubject sets the Subject field's value.

func (CreateCaseInput) String ¶

func (s CreateCaseInput) String() string

String returns the string representation

func (*CreateCaseInput) Validate ¶

func (s *CreateCaseInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateCaseOutput ¶

The AWS Support case ID returned by a successful completion of the CreateCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCaseResponse

type CreateCaseOutput struct {

    // The AWS Support case ID requested or returned in the call. The case ID is
    // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
    CaseId *string `locationName:"caseId" type:"string"`
    // contains filtered or unexported fields
}

func (CreateCaseOutput) GoString ¶

func (s CreateCaseOutput) GoString() string

GoString returns the string representation

func (*CreateCaseOutput) SetCaseId ¶

func (s *CreateCaseOutput) SetCaseId(v string) *CreateCaseOutput

SetCaseId sets the CaseId field's value.

func (CreateCaseOutput) String ¶

func (s CreateCaseOutput) String() string

String returns the string representation

type DescribeAttachmentInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachmentRequest

type DescribeAttachmentInput struct {

    // The ID of the attachment to return. Attachment IDs are returned by the DescribeCommunications
    // operation.
    //
    // AttachmentId is a required field
    AttachmentId *string `locationName:"attachmentId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeAttachmentInput) GoString ¶

func (s DescribeAttachmentInput) GoString() string

GoString returns the string representation

func (*DescribeAttachmentInput) SetAttachmentId ¶

func (s *DescribeAttachmentInput) SetAttachmentId(v string) *DescribeAttachmentInput

SetAttachmentId sets the AttachmentId field's value.

func (DescribeAttachmentInput) String ¶

func (s DescribeAttachmentInput) String() string

String returns the string representation

func (*DescribeAttachmentInput) Validate ¶

func (s *DescribeAttachmentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeAttachmentOutput ¶

The content and file name of the attachment returned by the DescribeAttachment operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachmentResponse

type DescribeAttachmentOutput struct {

    // The attachment content and file name.
    Attachment *Attachment `locationName:"attachment" type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeAttachmentOutput) GoString ¶

func (s DescribeAttachmentOutput) GoString() string

GoString returns the string representation

func (*DescribeAttachmentOutput) SetAttachment ¶

func (s *DescribeAttachmentOutput) SetAttachment(v *Attachment) *DescribeAttachmentOutput

SetAttachment sets the Attachment field's value.

func (DescribeAttachmentOutput) String ¶

func (s DescribeAttachmentOutput) String() string

String returns the string representation

type DescribeCasesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCasesRequest

type DescribeCasesInput struct {

    // The start date for a filtered date search on support case communications.
    // Case communications are available for 12 months after creation.
    AfterTime *string `locationName:"afterTime" type:"string"`

    // The end date for a filtered date search on support case communications. Case
    // communications are available for 12 months after creation.
    BeforeTime *string `locationName:"beforeTime" type:"string"`

    // A list of ID numbers of the support cases you want returned. The maximum
    // number of cases is 100.
    CaseIdList []*string `locationName:"caseIdList" type:"list"`

    // The ID displayed for a case in the AWS Support Center user interface.
    DisplayId *string `locationName:"displayId" type:"string"`

    // Specifies whether communications should be included in the DescribeCases
    // results. The default is true.
    IncludeCommunications *bool `locationName:"includeCommunications" type:"boolean"`

    // Specifies whether resolved support cases should be included in the DescribeCases
    // results. The default is false.
    IncludeResolvedCases *bool `locationName:"includeResolvedCases" type:"boolean"`

    // The ISO 639-1 code for the language in which AWS provides support. AWS Support
    // currently supports English ("en") and Japanese ("ja"). Language parameters
    // must be passed explicitly for operations that take them.
    Language *string `locationName:"language" type:"string"`

    // The maximum number of results to return before paginating.
    MaxResults *int64 `locationName:"maxResults" min:"10" type:"integer"`

    // A resumption point for pagination.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeCasesInput) GoString ¶

func (s DescribeCasesInput) GoString() string

GoString returns the string representation

func (*DescribeCasesInput) SetAfterTime ¶

func (s *DescribeCasesInput) SetAfterTime(v string) *DescribeCasesInput

SetAfterTime sets the AfterTime field's value.

func (*DescribeCasesInput) SetBeforeTime ¶

func (s *DescribeCasesInput) SetBeforeTime(v string) *DescribeCasesInput

SetBeforeTime sets the BeforeTime field's value.

func (*DescribeCasesInput) SetCaseIdList ¶

func (s *DescribeCasesInput) SetCaseIdList(v []*string) *DescribeCasesInput

SetCaseIdList sets the CaseIdList field's value.

func (*DescribeCasesInput) SetDisplayId ¶

func (s *DescribeCasesInput) SetDisplayId(v string) *DescribeCasesInput

SetDisplayId sets the DisplayId field's value.

func (*DescribeCasesInput) SetIncludeCommunications ¶

func (s *DescribeCasesInput) SetIncludeCommunications(v bool) *DescribeCasesInput

SetIncludeCommunications sets the IncludeCommunications field's value.

func (*DescribeCasesInput) SetIncludeResolvedCases ¶

func (s *DescribeCasesInput) SetIncludeResolvedCases(v bool) *DescribeCasesInput

SetIncludeResolvedCases sets the IncludeResolvedCases field's value.

func (*DescribeCasesInput) SetLanguage ¶

func (s *DescribeCasesInput) SetLanguage(v string) *DescribeCasesInput

SetLanguage sets the Language field's value.

func (*DescribeCasesInput) SetMaxResults ¶

func (s *DescribeCasesInput) SetMaxResults(v int64) *DescribeCasesInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeCasesInput) SetNextToken ¶

func (s *DescribeCasesInput) SetNextToken(v string) *DescribeCasesInput

SetNextToken sets the NextToken field's value.

func (DescribeCasesInput) String ¶

func (s DescribeCasesInput) String() string

String returns the string representation

func (*DescribeCasesInput) Validate ¶

func (s *DescribeCasesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeCasesOutput ¶

Returns an array of CaseDetails objects and a nextToken that defines a point for pagination in the result set. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCasesResponse

type DescribeCasesOutput struct {

    // The details for the cases that match the request.
    Cases []*CaseDetails `locationName:"cases" type:"list"`

    // A resumption point for pagination.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeCasesOutput) GoString ¶

func (s DescribeCasesOutput) GoString() string

GoString returns the string representation

func (*DescribeCasesOutput) SetCases ¶

func (s *DescribeCasesOutput) SetCases(v []*CaseDetails) *DescribeCasesOutput

SetCases sets the Cases field's value.

func (*DescribeCasesOutput) SetNextToken ¶

func (s *DescribeCasesOutput) SetNextToken(v string) *DescribeCasesOutput

SetNextToken sets the NextToken field's value.

func (DescribeCasesOutput) String ¶

func (s DescribeCasesOutput) String() string

String returns the string representation

type DescribeCommunicationsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunicationsRequest

type DescribeCommunicationsInput struct {

    // The start date for a filtered date search on support case communications.
    // Case communications are available for 12 months after creation.
    AfterTime *string `locationName:"afterTime" type:"string"`

    // The end date for a filtered date search on support case communications. Case
    // communications are available for 12 months after creation.
    BeforeTime *string `locationName:"beforeTime" type:"string"`

    // The AWS Support case ID requested or returned in the call. The case ID is
    // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
    //
    // CaseId is a required field
    CaseId *string `locationName:"caseId" type:"string" required:"true"`

    // The maximum number of results to return before paginating.
    MaxResults *int64 `locationName:"maxResults" min:"10" type:"integer"`

    // A resumption point for pagination.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeCommunicationsInput) GoString ¶

func (s DescribeCommunicationsInput) GoString() string

GoString returns the string representation

func (*DescribeCommunicationsInput) SetAfterTime ¶

func (s *DescribeCommunicationsInput) SetAfterTime(v string) *DescribeCommunicationsInput

SetAfterTime sets the AfterTime field's value.

func (*DescribeCommunicationsInput) SetBeforeTime ¶

func (s *DescribeCommunicationsInput) SetBeforeTime(v string) *DescribeCommunicationsInput

SetBeforeTime sets the BeforeTime field's value.

func (*DescribeCommunicationsInput) SetCaseId ¶

func (s *DescribeCommunicationsInput) SetCaseId(v string) *DescribeCommunicationsInput

SetCaseId sets the CaseId field's value.

func (*DescribeCommunicationsInput) SetMaxResults ¶

func (s *DescribeCommunicationsInput) SetMaxResults(v int64) *DescribeCommunicationsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeCommunicationsInput) SetNextToken ¶

func (s *DescribeCommunicationsInput) SetNextToken(v string) *DescribeCommunicationsInput

SetNextToken sets the NextToken field's value.

func (DescribeCommunicationsInput) String ¶

func (s DescribeCommunicationsInput) String() string

String returns the string representation

func (*DescribeCommunicationsInput) Validate ¶

func (s *DescribeCommunicationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeCommunicationsOutput ¶

The communications returned by the DescribeCommunications operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunicationsResponse

type DescribeCommunicationsOutput struct {

    // The communications for the case.
    Communications []*Communication `locationName:"communications" type:"list"`

    // A resumption point for pagination.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeCommunicationsOutput) GoString ¶

func (s DescribeCommunicationsOutput) GoString() string

GoString returns the string representation

func (*DescribeCommunicationsOutput) SetCommunications ¶

func (s *DescribeCommunicationsOutput) SetCommunications(v []*Communication) *DescribeCommunicationsOutput

SetCommunications sets the Communications field's value.

func (*DescribeCommunicationsOutput) SetNextToken ¶

func (s *DescribeCommunicationsOutput) SetNextToken(v string) *DescribeCommunicationsOutput

SetNextToken sets the NextToken field's value.

func (DescribeCommunicationsOutput) String ¶

func (s DescribeCommunicationsOutput) String() string

String returns the string representation

type DescribeServicesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServicesRequest

type DescribeServicesInput struct {

    // The ISO 639-1 code for the language in which AWS provides support. AWS Support
    // currently supports English ("en") and Japanese ("ja"). Language parameters
    // must be passed explicitly for operations that take them.
    Language *string `locationName:"language" type:"string"`

    // A JSON-formatted list of service codes available for AWS services.
    ServiceCodeList []*string `locationName:"serviceCodeList" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeServicesInput) GoString ¶

func (s DescribeServicesInput) GoString() string

GoString returns the string representation

func (*DescribeServicesInput) SetLanguage ¶

func (s *DescribeServicesInput) SetLanguage(v string) *DescribeServicesInput

SetLanguage sets the Language field's value.

func (*DescribeServicesInput) SetServiceCodeList ¶

func (s *DescribeServicesInput) SetServiceCodeList(v []*string) *DescribeServicesInput

SetServiceCodeList sets the ServiceCodeList field's value.

func (DescribeServicesInput) String ¶

func (s DescribeServicesInput) String() string

String returns the string representation

type DescribeServicesOutput ¶

The list of AWS services returned by the DescribeServices operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServicesResponse

type DescribeServicesOutput struct {

    // A JSON-formatted list of AWS services.
    Services []*Service `locationName:"services" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeServicesOutput) GoString ¶

func (s DescribeServicesOutput) GoString() string

GoString returns the string representation

func (*DescribeServicesOutput) SetServices ¶

func (s *DescribeServicesOutput) SetServices(v []*Service) *DescribeServicesOutput

SetServices sets the Services field's value.

func (DescribeServicesOutput) String ¶

func (s DescribeServicesOutput) String() string

String returns the string representation

type DescribeSeverityLevelsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevelsRequest

type DescribeSeverityLevelsInput struct {

    // The ISO 639-1 code for the language in which AWS provides support. AWS Support
    // currently supports English ("en") and Japanese ("ja"). Language parameters
    // must be passed explicitly for operations that take them.
    Language *string `locationName:"language" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeSeverityLevelsInput) GoString ¶

func (s DescribeSeverityLevelsInput) GoString() string

GoString returns the string representation

func (*DescribeSeverityLevelsInput) SetLanguage ¶

func (s *DescribeSeverityLevelsInput) SetLanguage(v string) *DescribeSeverityLevelsInput

SetLanguage sets the Language field's value.

func (DescribeSeverityLevelsInput) String ¶

func (s DescribeSeverityLevelsInput) String() string

String returns the string representation

type DescribeSeverityLevelsOutput ¶

The list of severity levels returned by the DescribeSeverityLevels operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevelsResponse

type DescribeSeverityLevelsOutput struct {

    // The available severity levels for the support case. Available severity levels
    // are defined by your service level agreement with AWS.
    SeverityLevels []*SeverityLevel `locationName:"severityLevels" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeSeverityLevelsOutput) GoString ¶

func (s DescribeSeverityLevelsOutput) GoString() string

GoString returns the string representation

func (*DescribeSeverityLevelsOutput) SetSeverityLevels ¶

func (s *DescribeSeverityLevelsOutput) SetSeverityLevels(v []*SeverityLevel) *DescribeSeverityLevelsOutput

SetSeverityLevels sets the SeverityLevels field's value.

func (DescribeSeverityLevelsOutput) String ¶

func (s DescribeSeverityLevelsOutput) String() string

String returns the string representation

type DescribeTrustedAdvisorCheckRefreshStatusesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatusesRequest

type DescribeTrustedAdvisorCheckRefreshStatusesInput struct {

    // The IDs of the Trusted Advisor checks to get the status of. Note: Specifying
    // the check ID of a check that is automatically refreshed causes an InvalidParameterValue
    // error.
    //
    // CheckIds is a required field
    CheckIds []*string `locationName:"checkIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorCheckRefreshStatusesInput) GoString ¶

func (s DescribeTrustedAdvisorCheckRefreshStatusesInput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckRefreshStatusesInput) SetCheckIds ¶

func (s *DescribeTrustedAdvisorCheckRefreshStatusesInput) SetCheckIds(v []*string) *DescribeTrustedAdvisorCheckRefreshStatusesInput

SetCheckIds sets the CheckIds field's value.

func (DescribeTrustedAdvisorCheckRefreshStatusesInput) String ¶

func (s DescribeTrustedAdvisorCheckRefreshStatusesInput) String() string

String returns the string representation

func (*DescribeTrustedAdvisorCheckRefreshStatusesInput) Validate ¶

func (s *DescribeTrustedAdvisorCheckRefreshStatusesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorCheckRefreshStatusesOutput ¶

The statuses of the Trusted Advisor checks returned by the DescribeTrustedAdvisorCheckRefreshStatuses operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatusesResponse

type DescribeTrustedAdvisorCheckRefreshStatusesOutput struct {

    // The refresh status of the specified Trusted Advisor checks.
    //
    // Statuses is a required field
    Statuses []*TrustedAdvisorCheckRefreshStatus `locationName:"statuses" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorCheckRefreshStatusesOutput) GoString ¶

func (s DescribeTrustedAdvisorCheckRefreshStatusesOutput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckRefreshStatusesOutput) SetStatuses ¶

func (s *DescribeTrustedAdvisorCheckRefreshStatusesOutput) SetStatuses(v []*TrustedAdvisorCheckRefreshStatus) *DescribeTrustedAdvisorCheckRefreshStatusesOutput

SetStatuses sets the Statuses field's value.

func (DescribeTrustedAdvisorCheckRefreshStatusesOutput) String ¶

func (s DescribeTrustedAdvisorCheckRefreshStatusesOutput) String() string

String returns the string representation

type DescribeTrustedAdvisorCheckResultInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResultRequest

type DescribeTrustedAdvisorCheckResultInput struct {

    // The unique identifier for the Trusted Advisor check.
    //
    // CheckId is a required field
    CheckId *string `locationName:"checkId" type:"string" required:"true"`

    // The ISO 639-1 code for the language in which AWS provides support. AWS Support
    // currently supports English ("en") and Japanese ("ja"). Language parameters
    // must be passed explicitly for operations that take them.
    Language *string `locationName:"language" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorCheckResultInput) GoString ¶

func (s DescribeTrustedAdvisorCheckResultInput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckResultInput) SetCheckId ¶

func (s *DescribeTrustedAdvisorCheckResultInput) SetCheckId(v string) *DescribeTrustedAdvisorCheckResultInput

SetCheckId sets the CheckId field's value.

func (*DescribeTrustedAdvisorCheckResultInput) SetLanguage ¶

func (s *DescribeTrustedAdvisorCheckResultInput) SetLanguage(v string) *DescribeTrustedAdvisorCheckResultInput

SetLanguage sets the Language field's value.

func (DescribeTrustedAdvisorCheckResultInput) String ¶

func (s DescribeTrustedAdvisorCheckResultInput) String() string

String returns the string representation

func (*DescribeTrustedAdvisorCheckResultInput) Validate ¶

func (s *DescribeTrustedAdvisorCheckResultInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorCheckResultOutput ¶

The result of the Trusted Advisor check returned by the DescribeTrustedAdvisorCheckResult operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResultResponse

type DescribeTrustedAdvisorCheckResultOutput struct {

    // The detailed results of the Trusted Advisor check.
    Result *TrustedAdvisorCheckResult `locationName:"result" type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorCheckResultOutput) GoString ¶

func (s DescribeTrustedAdvisorCheckResultOutput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckResultOutput) SetResult ¶

func (s *DescribeTrustedAdvisorCheckResultOutput) SetResult(v *TrustedAdvisorCheckResult) *DescribeTrustedAdvisorCheckResultOutput

SetResult sets the Result field's value.

func (DescribeTrustedAdvisorCheckResultOutput) String ¶

func (s DescribeTrustedAdvisorCheckResultOutput) String() string

String returns the string representation

type DescribeTrustedAdvisorCheckSummariesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummariesRequest

type DescribeTrustedAdvisorCheckSummariesInput struct {

    // The IDs of the Trusted Advisor checks.
    //
    // CheckIds is a required field
    CheckIds []*string `locationName:"checkIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorCheckSummariesInput) GoString ¶

func (s DescribeTrustedAdvisorCheckSummariesInput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckSummariesInput) SetCheckIds ¶

func (s *DescribeTrustedAdvisorCheckSummariesInput) SetCheckIds(v []*string) *DescribeTrustedAdvisorCheckSummariesInput

SetCheckIds sets the CheckIds field's value.

func (DescribeTrustedAdvisorCheckSummariesInput) String ¶

func (s DescribeTrustedAdvisorCheckSummariesInput) String() string

String returns the string representation

func (*DescribeTrustedAdvisorCheckSummariesInput) Validate ¶

func (s *DescribeTrustedAdvisorCheckSummariesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorCheckSummariesOutput ¶

The summaries of the Trusted Advisor checks returned by the DescribeTrustedAdvisorCheckSummaries operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummariesResponse

type DescribeTrustedAdvisorCheckSummariesOutput struct {

    // The summary information for the requested Trusted Advisor checks.
    //
    // Summaries is a required field
    Summaries []*TrustedAdvisorCheckSummary `locationName:"summaries" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorCheckSummariesOutput) GoString ¶

func (s DescribeTrustedAdvisorCheckSummariesOutput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckSummariesOutput) SetSummaries ¶

func (s *DescribeTrustedAdvisorCheckSummariesOutput) SetSummaries(v []*TrustedAdvisorCheckSummary) *DescribeTrustedAdvisorCheckSummariesOutput

SetSummaries sets the Summaries field's value.

func (DescribeTrustedAdvisorCheckSummariesOutput) String ¶

func (s DescribeTrustedAdvisorCheckSummariesOutput) String() string

String returns the string representation

type DescribeTrustedAdvisorChecksInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecksRequest

type DescribeTrustedAdvisorChecksInput struct {

    // The ISO 639-1 code for the language in which AWS provides support. AWS Support
    // currently supports English ("en") and Japanese ("ja"). Language parameters
    // must be passed explicitly for operations that take them.
    //
    // Language is a required field
    Language *string `locationName:"language" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorChecksInput) GoString ¶

func (s DescribeTrustedAdvisorChecksInput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorChecksInput) SetLanguage ¶

func (s *DescribeTrustedAdvisorChecksInput) SetLanguage(v string) *DescribeTrustedAdvisorChecksInput

SetLanguage sets the Language field's value.

func (DescribeTrustedAdvisorChecksInput) String ¶

func (s DescribeTrustedAdvisorChecksInput) String() string

String returns the string representation

func (*DescribeTrustedAdvisorChecksInput) Validate ¶

func (s *DescribeTrustedAdvisorChecksInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorChecksOutput ¶

Information about the Trusted Advisor checks returned by the DescribeTrustedAdvisorChecks operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecksResponse

type DescribeTrustedAdvisorChecksOutput struct {

    // Information about all available Trusted Advisor checks.
    //
    // Checks is a required field
    Checks []*TrustedAdvisorCheckDescription `locationName:"checks" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTrustedAdvisorChecksOutput) GoString ¶

func (s DescribeTrustedAdvisorChecksOutput) GoString() string

GoString returns the string representation

func (*DescribeTrustedAdvisorChecksOutput) SetChecks ¶

func (s *DescribeTrustedAdvisorChecksOutput) SetChecks(v []*TrustedAdvisorCheckDescription) *DescribeTrustedAdvisorChecksOutput

SetChecks sets the Checks field's value.

func (DescribeTrustedAdvisorChecksOutput) String ¶

func (s DescribeTrustedAdvisorChecksOutput) String() string

String returns the string representation

type RecentCaseCommunications ¶

The five most recent communications associated with the case. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RecentCaseCommunications

type RecentCaseCommunications struct {

    // The five most recent communications associated with the case.
    Communications []*Communication `locationName:"communications" type:"list"`

    // A resumption point for pagination.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (RecentCaseCommunications) GoString ¶

func (s RecentCaseCommunications) GoString() string

GoString returns the string representation

func (*RecentCaseCommunications) SetCommunications ¶

func (s *RecentCaseCommunications) SetCommunications(v []*Communication) *RecentCaseCommunications

SetCommunications sets the Communications field's value.

func (*RecentCaseCommunications) SetNextToken ¶

func (s *RecentCaseCommunications) SetNextToken(v string) *RecentCaseCommunications

SetNextToken sets the NextToken field's value.

func (RecentCaseCommunications) String ¶

func (s RecentCaseCommunications) String() string

String returns the string representation

type RefreshTrustedAdvisorCheckInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheckRequest

type RefreshTrustedAdvisorCheckInput struct {

    // The unique identifier for the Trusted Advisor check to refresh. Note: Specifying
    // the check ID of a check that is automatically refreshed causes an InvalidParameterValue
    // error.
    //
    // CheckId is a required field
    CheckId *string `locationName:"checkId" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (RefreshTrustedAdvisorCheckInput) GoString ¶

func (s RefreshTrustedAdvisorCheckInput) GoString() string

GoString returns the string representation

func (*RefreshTrustedAdvisorCheckInput) SetCheckId ¶

func (s *RefreshTrustedAdvisorCheckInput) SetCheckId(v string) *RefreshTrustedAdvisorCheckInput

SetCheckId sets the CheckId field's value.

func (RefreshTrustedAdvisorCheckInput) String ¶

func (s RefreshTrustedAdvisorCheckInput) String() string

String returns the string representation

func (*RefreshTrustedAdvisorCheckInput) Validate ¶

func (s *RefreshTrustedAdvisorCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RefreshTrustedAdvisorCheckOutput ¶

The current refresh status of a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheckResponse

type RefreshTrustedAdvisorCheckOutput struct {

    // The current refresh status for a check, including the amount of time until
    // the check is eligible for refresh.
    //
    // Status is a required field
    Status *TrustedAdvisorCheckRefreshStatus `locationName:"status" type:"structure" required:"true"`
    // contains filtered or unexported fields
}

func (RefreshTrustedAdvisorCheckOutput) GoString ¶

func (s RefreshTrustedAdvisorCheckOutput) GoString() string

GoString returns the string representation

func (*RefreshTrustedAdvisorCheckOutput) SetStatus ¶

func (s *RefreshTrustedAdvisorCheckOutput) SetStatus(v *TrustedAdvisorCheckRefreshStatus) *RefreshTrustedAdvisorCheckOutput

SetStatus sets the Status field's value.

func (RefreshTrustedAdvisorCheckOutput) String ¶

func (s RefreshTrustedAdvisorCheckOutput) String() string

String returns the string representation

type ResolveCaseInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCaseRequest

type ResolveCaseInput struct {

    // The AWS Support case ID requested or returned in the call. The case ID is
    // an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
    CaseId *string `locationName:"caseId" type:"string"`
    // contains filtered or unexported fields
}

func (ResolveCaseInput) GoString ¶

func (s ResolveCaseInput) GoString() string

GoString returns the string representation

func (*ResolveCaseInput) SetCaseId ¶

func (s *ResolveCaseInput) SetCaseId(v string) *ResolveCaseInput

SetCaseId sets the CaseId field's value.

func (ResolveCaseInput) String ¶

func (s ResolveCaseInput) String() string

String returns the string representation

type ResolveCaseOutput ¶

The status of the case returned by the ResolveCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCaseResponse

type ResolveCaseOutput struct {

    // The status of the case after the ResolveCase request was processed.
    FinalCaseStatus *string `locationName:"finalCaseStatus" type:"string"`

    // The status of the case when the ResolveCase request was sent.
    InitialCaseStatus *string `locationName:"initialCaseStatus" type:"string"`
    // contains filtered or unexported fields
}

func (ResolveCaseOutput) GoString ¶

func (s ResolveCaseOutput) GoString() string

GoString returns the string representation

func (*ResolveCaseOutput) SetFinalCaseStatus ¶

func (s *ResolveCaseOutput) SetFinalCaseStatus(v string) *ResolveCaseOutput

SetFinalCaseStatus sets the FinalCaseStatus field's value.

func (*ResolveCaseOutput) SetInitialCaseStatus ¶

func (s *ResolveCaseOutput) SetInitialCaseStatus(v string) *ResolveCaseOutput

SetInitialCaseStatus sets the InitialCaseStatus field's value.

func (ResolveCaseOutput) String ¶

func (s ResolveCaseOutput) String() string

String returns the string representation

type Service ¶

Information about an AWS service returned by the DescribeServices operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Service

type Service struct {

    // A list of categories that describe the type of support issue a case describes.
    // Categories consist of a category name and a category code. Category names
    // and codes are passed to AWS Support when you call CreateCase.
    Categories []*Category `locationName:"categories" type:"list"`

    // The code for an AWS service returned by the DescribeServices response. The
    // name element contains the corresponding friendly name.
    Code *string `locationName:"code" type:"string"`

    // The friendly name for an AWS service. The code element contains the corresponding
    // code.
    Name *string `locationName:"name" type:"string"`
    // contains filtered or unexported fields
}

func (Service) GoString ¶

func (s Service) GoString() string

GoString returns the string representation

func (*Service) SetCategories ¶

func (s *Service) SetCategories(v []*Category) *Service

SetCategories sets the Categories field's value.

func (*Service) SetCode ¶

func (s *Service) SetCode(v string) *Service

SetCode sets the Code field's value.

func (*Service) SetName ¶

func (s *Service) SetName(v string) *Service

SetName sets the Name field's value.

func (Service) String ¶

func (s Service) String() string

String returns the string representation

type SeverityLevel ¶

A code and name pair that represent a severity level that can be applied to a support case. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/SeverityLevel

type SeverityLevel struct {

    // One of four values: "low," "medium," "high," and "urgent". These values correspond
    // to response times returned to the caller in severityLevel.name.
    Code *string `locationName:"code" type:"string"`

    // The name of the severity level that corresponds to the severity level code.
    Name *string `locationName:"name" type:"string"`
    // contains filtered or unexported fields
}

func (SeverityLevel) GoString ¶

func (s SeverityLevel) GoString() string

GoString returns the string representation

func (*SeverityLevel) SetCode ¶

func (s *SeverityLevel) SetCode(v string) *SeverityLevel

SetCode sets the Code field's value.

func (*SeverityLevel) SetName ¶

func (s *SeverityLevel) SetName(v string) *SeverityLevel

SetName sets the Name field's value.

func (SeverityLevel) String ¶

func (s SeverityLevel) String() string

String returns the string representation

type Support ¶

Support provides the API operation methods for making requests to AWS Support. See this package's package overview docs for details on the service.

Support methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

type Support struct {
    *client.Client
}

func New ¶

func New(p client.ConfigProvider, cfgs ...*aws.Config) *Support

New creates a new instance of the Support client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a Support client from just a session.
svc := support.New(mySession)

// Create a Support client with additional configuration
svc := support.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*Support) AddAttachmentsToSet ¶

func (c *Support) AddAttachmentsToSet(input *AddAttachmentsToSetInput) (*AddAttachmentsToSetOutput, error)

AddAttachmentsToSet API operation for AWS Support.

Adds one or more attachments to an attachment set. If an attachmentSetId is not specified, a new attachment set is created, and the ID of the set is returned in the response. If an attachmentSetId is specified, the attachments are added to the specified set, if it exists.

An attachment set is a temporary container for attachments that are to be added to a case or case communication. The set is available for one hour after it is created; the expiryTime returned in the response indicates when the set expires. The maximum number of attachments in a set is 3, and the maximum size of any attachment in the set is 5 MB.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation AddAttachmentsToSet for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

* ErrCodeAttachmentSetIdNotFound "AttachmentSetIdNotFound"
An attachment set with the specified ID could not be found.

* ErrCodeAttachmentSetExpired "AttachmentSetExpired"
The expiration time of the attachment set has passed. The set expires 1 hour
after it is created.

* ErrCodeAttachmentSetSizeLimitExceeded "AttachmentSetSizeLimitExceeded"
A limit for the size of an attachment set has been exceeded. The limits are
3 attachments and 5 MB per attachment.

* ErrCodeAttachmentLimitExceeded "AttachmentLimitExceeded"
The limit for the number of attachment sets created in a short period of
time has been exceeded.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSet

func (*Support) AddAttachmentsToSetRequest ¶

func (c *Support) AddAttachmentsToSetRequest(input *AddAttachmentsToSetInput) (req *request.Request, output *AddAttachmentsToSetOutput)

AddAttachmentsToSetRequest generates a "aws/request.Request" representing the client's request for the AddAttachmentsToSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AddAttachmentsToSet for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddAttachmentsToSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AddAttachmentsToSetRequest method.
req, resp := client.AddAttachmentsToSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSet

func (*Support) AddAttachmentsToSetWithContext ¶

func (c *Support) AddAttachmentsToSetWithContext(ctx aws.Context, input *AddAttachmentsToSetInput, opts ...request.Option) (*AddAttachmentsToSetOutput, error)

AddAttachmentsToSetWithContext is the same as AddAttachmentsToSet with the addition of the ability to pass a context and additional request options.

See AddAttachmentsToSet for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) AddCommunicationToCase ¶

func (c *Support) AddCommunicationToCase(input *AddCommunicationToCaseInput) (*AddCommunicationToCaseOutput, error)

AddCommunicationToCase API operation for AWS Support.

Adds additional customer communication to an AWS Support case. You use the caseId value to identify the case to add communication to. You can list a set of email addresses to copy on the communication using the ccEmailAddresses value. The communicationBody value contains the text of the communication.

The response indicates the success or failure of the request.

This operation implements a subset of the features of the AWS Support Center.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation AddCommunicationToCase for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

* ErrCodeCaseIdNotFound "CaseIdNotFound"
The requested caseId could not be located.

* ErrCodeAttachmentSetIdNotFound "AttachmentSetIdNotFound"
An attachment set with the specified ID could not be found.

* ErrCodeAttachmentSetExpired "AttachmentSetExpired"
The expiration time of the attachment set has passed. The set expires 1 hour
after it is created.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCase

func (*Support) AddCommunicationToCaseRequest ¶

func (c *Support) AddCommunicationToCaseRequest(input *AddCommunicationToCaseInput) (req *request.Request, output *AddCommunicationToCaseOutput)

AddCommunicationToCaseRequest generates a "aws/request.Request" representing the client's request for the AddCommunicationToCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AddCommunicationToCase for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddCommunicationToCase method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AddCommunicationToCaseRequest method.
req, resp := client.AddCommunicationToCaseRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCase

func (*Support) AddCommunicationToCaseWithContext ¶

func (c *Support) AddCommunicationToCaseWithContext(ctx aws.Context, input *AddCommunicationToCaseInput, opts ...request.Option) (*AddCommunicationToCaseOutput, error)

AddCommunicationToCaseWithContext is the same as AddCommunicationToCase with the addition of the ability to pass a context and additional request options.

See AddCommunicationToCase for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) CreateCase ¶

func (c *Support) CreateCase(input *CreateCaseInput) (*CreateCaseOutput, error)

CreateCase API operation for AWS Support.

Creates a new case in the AWS Support Center. This operation is modeled on the behavior of the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page. Its parameters require you to specify the following information:

* issueType. The type of issue for the case. You can specify either "customer-service"
or "technical." If you do not indicate a value, the default is "technical."

* serviceCode. The code for an AWS service. You obtain the serviceCode
by calling DescribeServices.

* categoryCode. The category for the service defined for the serviceCode
value. You also obtain the category code for a service by calling DescribeServices.
Each AWS service defines its own set of category codes.

* severityCode. A value that indicates the urgency of the case, which
in turn determines the response time according to your service level agreement
with AWS Support. You obtain the SeverityCode by calling DescribeSeverityLevels.

* subject. The Subject field on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create)
page.

* communicationBody. The Description field on the AWS Support Center Create
Case (https://console.aws.amazon.com/support/home#/case/create) page.

* attachmentSetId. The ID of a set of attachments that has been created
by using AddAttachmentsToSet.

* language. The human language in which AWS Support handles the case.
English and Japanese are currently supported.

* ccEmailAddresses. The AWS Support Center CC field on the Create Case
(https://console.aws.amazon.com/support/home#/case/create) page. You can
list email addresses to be copied on any correspondence about the case.
The account that opens the case is already identified by passing the AWS
Credentials in the HTTP POST method or in a method or function call from
one of the programming languages supported by an AWS SDK (http://aws.amazon.com/tools/).

To add additional communication or attachments to an existing case, use AddCommunicationToCase.

A successful CreateCase request returns an AWS Support case number. Case numbers are used by the DescribeCases operation to retrieve existing AWS Support cases.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation CreateCase for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

* ErrCodeCaseCreationLimitExceeded "CaseCreationLimitExceeded"
The case creation limit for the account has been exceeded.

* ErrCodeAttachmentSetIdNotFound "AttachmentSetIdNotFound"
An attachment set with the specified ID could not be found.

* ErrCodeAttachmentSetExpired "AttachmentSetExpired"
The expiration time of the attachment set has passed. The set expires 1 hour
after it is created.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCase

func (*Support) CreateCaseRequest ¶

func (c *Support) CreateCaseRequest(input *CreateCaseInput) (req *request.Request, output *CreateCaseOutput)

CreateCaseRequest generates a "aws/request.Request" representing the client's request for the CreateCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateCase for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateCase method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateCaseRequest method.
req, resp := client.CreateCaseRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCase

func (*Support) CreateCaseWithContext ¶

func (c *Support) CreateCaseWithContext(ctx aws.Context, input *CreateCaseInput, opts ...request.Option) (*CreateCaseOutput, error)

CreateCaseWithContext is the same as CreateCase with the addition of the ability to pass a context and additional request options.

See CreateCase for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeAttachment ¶

func (c *Support) DescribeAttachment(input *DescribeAttachmentInput) (*DescribeAttachmentOutput, error)

DescribeAttachment API operation for AWS Support.

Returns the attachment that has the specified ID. Attachment IDs are generated by the case management system when you add an attachment to a case or case communication. Attachment IDs are returned in the AttachmentDetails objects that are returned by the DescribeCommunications operation.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeAttachment for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

* ErrCodeDescribeAttachmentLimitExceeded "DescribeAttachmentLimitExceeded"
The limit for the number of DescribeAttachment requests in a short period
of time has been exceeded.

* ErrCodeAttachmentIdNotFound "AttachmentIdNotFound"
An attachment with the specified ID could not be found.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachment

func (*Support) DescribeAttachmentRequest ¶

func (c *Support) DescribeAttachmentRequest(input *DescribeAttachmentInput) (req *request.Request, output *DescribeAttachmentOutput)

DescribeAttachmentRequest generates a "aws/request.Request" representing the client's request for the DescribeAttachment operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeAttachment for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAttachment method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeAttachmentRequest method.
req, resp := client.DescribeAttachmentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachment

func (*Support) DescribeAttachmentWithContext ¶

func (c *Support) DescribeAttachmentWithContext(ctx aws.Context, input *DescribeAttachmentInput, opts ...request.Option) (*DescribeAttachmentOutput, error)

DescribeAttachmentWithContext is the same as DescribeAttachment with the addition of the ability to pass a context and additional request options.

See DescribeAttachment for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCases ¶

func (c *Support) DescribeCases(input *DescribeCasesInput) (*DescribeCasesOutput, error)

DescribeCases API operation for AWS Support.

Returns a list of cases that you specify by passing one or more case IDs. In addition, you can filter the cases by date by setting values for the afterTime and beforeTime request parameters. You can set values for the includeResolvedCases and includeCommunications request parameters to control how much information is returned.

Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.

The response returns the following in JSON format:

* One or more CaseDetails data types.

* One or more nextToken values, which specify where to paginate the returned
records represented by the CaseDetails objects.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeCases for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

* ErrCodeCaseIdNotFound "CaseIdNotFound"
The requested caseId could not be located.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCases

func (*Support) DescribeCasesPages ¶

func (c *Support) DescribeCasesPages(input *DescribeCasesInput, fn func(*DescribeCasesOutput, bool) bool) error

DescribeCasesPages iterates over the pages of a DescribeCases operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeCases method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a DescribeCases operation.
pageNum := 0
err := client.DescribeCasesPages(params,
    func(page *DescribeCasesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Support) DescribeCasesPagesWithContext ¶

func (c *Support) DescribeCasesPagesWithContext(ctx aws.Context, input *DescribeCasesInput, fn func(*DescribeCasesOutput, bool) bool, opts ...request.Option) error

DescribeCasesPagesWithContext same as DescribeCasesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCasesRequest ¶

func (c *Support) DescribeCasesRequest(input *DescribeCasesInput) (req *request.Request, output *DescribeCasesOutput)

DescribeCasesRequest generates a "aws/request.Request" representing the client's request for the DescribeCases operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeCases for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCases method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeCasesRequest method.
req, resp := client.DescribeCasesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCases

func (*Support) DescribeCasesWithContext ¶

func (c *Support) DescribeCasesWithContext(ctx aws.Context, input *DescribeCasesInput, opts ...request.Option) (*DescribeCasesOutput, error)

DescribeCasesWithContext is the same as DescribeCases with the addition of the ability to pass a context and additional request options.

See DescribeCases for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCommunications ¶

func (c *Support) DescribeCommunications(input *DescribeCommunicationsInput) (*DescribeCommunicationsOutput, error)

DescribeCommunications API operation for AWS Support.

Returns communications (and attachments) for one or more support cases. You can use the afterTime and beforeTime parameters to filter by date. You can use the caseId parameter to restrict the results to a particular case.

Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.

You can use the maxResults and nextToken parameters to control the pagination of the result set. Set maxResults to the number of cases you want displayed on each page, and use nextToken to specify the resumption of pagination.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeCommunications for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

* ErrCodeCaseIdNotFound "CaseIdNotFound"
The requested caseId could not be located.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunications

func (*Support) DescribeCommunicationsPages ¶

func (c *Support) DescribeCommunicationsPages(input *DescribeCommunicationsInput, fn func(*DescribeCommunicationsOutput, bool) bool) error

DescribeCommunicationsPages iterates over the pages of a DescribeCommunications operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeCommunications method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a DescribeCommunications operation.
pageNum := 0
err := client.DescribeCommunicationsPages(params,
    func(page *DescribeCommunicationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Support) DescribeCommunicationsPagesWithContext ¶

func (c *Support) DescribeCommunicationsPagesWithContext(ctx aws.Context, input *DescribeCommunicationsInput, fn func(*DescribeCommunicationsOutput, bool) bool, opts ...request.Option) error

DescribeCommunicationsPagesWithContext same as DescribeCommunicationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCommunicationsRequest ¶

func (c *Support) DescribeCommunicationsRequest(input *DescribeCommunicationsInput) (req *request.Request, output *DescribeCommunicationsOutput)

DescribeCommunicationsRequest generates a "aws/request.Request" representing the client's request for the DescribeCommunications operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeCommunications for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCommunications method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeCommunicationsRequest method.
req, resp := client.DescribeCommunicationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunications

func (*Support) DescribeCommunicationsWithContext ¶

func (c *Support) DescribeCommunicationsWithContext(ctx aws.Context, input *DescribeCommunicationsInput, opts ...request.Option) (*DescribeCommunicationsOutput, error)

DescribeCommunicationsWithContext is the same as DescribeCommunications with the addition of the ability to pass a context and additional request options.

See DescribeCommunications for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeServices ¶

func (c *Support) DescribeServices(input *DescribeServicesInput) (*DescribeServicesOutput, error)

DescribeServices API operation for AWS Support.

Returns the current list of AWS services and a list of service categories that applies to each one. You then use service names and categories in your CreateCase requests. Each AWS service has its own set of categories.

The service codes and category codes correspond to the values that are displayed in the Service and Category drop-down lists on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page. The values in those fields, however, do not necessarily match the service codes and categories returned by the DescribeServices request. Always use the service codes and categories obtained programmatically. This practice ensures that you always have the most recent set of service and category codes.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeServices for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServices

func (*Support) DescribeServicesRequest ¶

func (c *Support) DescribeServicesRequest(input *DescribeServicesInput) (req *request.Request, output *DescribeServicesOutput)

DescribeServicesRequest generates a "aws/request.Request" representing the client's request for the DescribeServices operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeServices for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeServices method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeServicesRequest method.
req, resp := client.DescribeServicesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServices

func (*Support) DescribeServicesWithContext ¶

func (c *Support) DescribeServicesWithContext(ctx aws.Context, input *DescribeServicesInput, opts ...request.Option) (*DescribeServicesOutput, error)

DescribeServicesWithContext is the same as DescribeServices with the addition of the ability to pass a context and additional request options.

See DescribeServices for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeSeverityLevels ¶

func (c *Support) DescribeSeverityLevels(input *DescribeSeverityLevelsInput) (*DescribeSeverityLevelsOutput, error)

DescribeSeverityLevels API operation for AWS Support.

Returns the list of severity levels that you can assign to an AWS Support case. The severity level for a case is also a field in the CaseDetails data type included in any CreateCase request.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeSeverityLevels for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevels

func (*Support) DescribeSeverityLevelsRequest ¶

func (c *Support) DescribeSeverityLevelsRequest(input *DescribeSeverityLevelsInput) (req *request.Request, output *DescribeSeverityLevelsOutput)

DescribeSeverityLevelsRequest generates a "aws/request.Request" representing the client's request for the DescribeSeverityLevels operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeSeverityLevels for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSeverityLevels method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeSeverityLevelsRequest method.
req, resp := client.DescribeSeverityLevelsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevels

func (*Support) DescribeSeverityLevelsWithContext ¶

func (c *Support) DescribeSeverityLevelsWithContext(ctx aws.Context, input *DescribeSeverityLevelsInput, opts ...request.Option) (*DescribeSeverityLevelsOutput, error)

DescribeSeverityLevelsWithContext is the same as DescribeSeverityLevels with the addition of the ability to pass a context and additional request options.

See DescribeSeverityLevels for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorCheckRefreshStatuses ¶

func (c *Support) DescribeTrustedAdvisorCheckRefreshStatuses(input *DescribeTrustedAdvisorCheckRefreshStatusesInput) (*DescribeTrustedAdvisorCheckRefreshStatusesOutput, error)

DescribeTrustedAdvisorCheckRefreshStatuses API operation for AWS Support.

Returns the refresh status of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

Some checks are refreshed automatically, and their refresh statuses cannot be retrieved by using this operation. Use of the DescribeTrustedAdvisorCheckRefreshStatuses operation for these checks causes an InvalidParameterValue error.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckRefreshStatuses for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatuses

func (*Support) DescribeTrustedAdvisorCheckRefreshStatusesRequest ¶

func (c *Support) DescribeTrustedAdvisorCheckRefreshStatusesRequest(input *DescribeTrustedAdvisorCheckRefreshStatusesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckRefreshStatusesOutput)

DescribeTrustedAdvisorCheckRefreshStatusesRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckRefreshStatuses operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorCheckRefreshStatuses for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckRefreshStatuses method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorCheckRefreshStatusesRequest method.
req, resp := client.DescribeTrustedAdvisorCheckRefreshStatusesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatuses

func (*Support) DescribeTrustedAdvisorCheckRefreshStatusesWithContext ¶

func (c *Support) DescribeTrustedAdvisorCheckRefreshStatusesWithContext(ctx aws.Context, input *DescribeTrustedAdvisorCheckRefreshStatusesInput, opts ...request.Option) (*DescribeTrustedAdvisorCheckRefreshStatusesOutput, error)

DescribeTrustedAdvisorCheckRefreshStatusesWithContext is the same as DescribeTrustedAdvisorCheckRefreshStatuses with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorCheckRefreshStatuses for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorCheckResult ¶

func (c *Support) DescribeTrustedAdvisorCheckResult(input *DescribeTrustedAdvisorCheckResultInput) (*DescribeTrustedAdvisorCheckResultOutput, error)

DescribeTrustedAdvisorCheckResult API operation for AWS Support.

Returns the results of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

The response contains a TrustedAdvisorCheckResult object, which contains these three objects:

* TrustedAdvisorCategorySpecificSummary

* TrustedAdvisorResourceDetail

* TrustedAdvisorResourcesSummary

In addition, the response contains these fields:

* status. The alert status of the check: "ok" (green), "warning" (yellow),
"error" (red), or "not_available".

* timestamp. The time of the last refresh of the check.

* checkId. The unique identifier for the check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckResult for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResult

func (*Support) DescribeTrustedAdvisorCheckResultRequest ¶

func (c *Support) DescribeTrustedAdvisorCheckResultRequest(input *DescribeTrustedAdvisorCheckResultInput) (req *request.Request, output *DescribeTrustedAdvisorCheckResultOutput)

DescribeTrustedAdvisorCheckResultRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorCheckResult for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckResult method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorCheckResultRequest method.
req, resp := client.DescribeTrustedAdvisorCheckResultRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResult

func (*Support) DescribeTrustedAdvisorCheckResultWithContext ¶

func (c *Support) DescribeTrustedAdvisorCheckResultWithContext(ctx aws.Context, input *DescribeTrustedAdvisorCheckResultInput, opts ...request.Option) (*DescribeTrustedAdvisorCheckResultOutput, error)

DescribeTrustedAdvisorCheckResultWithContext is the same as DescribeTrustedAdvisorCheckResult with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorCheckResult for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorCheckSummaries ¶

func (c *Support) DescribeTrustedAdvisorCheckSummaries(input *DescribeTrustedAdvisorCheckSummariesInput) (*DescribeTrustedAdvisorCheckSummariesOutput, error)

DescribeTrustedAdvisorCheckSummaries API operation for AWS Support.

Returns the summaries of the results of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

The response contains an array of TrustedAdvisorCheckSummary objects.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckSummaries for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummaries

func (*Support) DescribeTrustedAdvisorCheckSummariesRequest ¶

func (c *Support) DescribeTrustedAdvisorCheckSummariesRequest(input *DescribeTrustedAdvisorCheckSummariesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckSummariesOutput)

DescribeTrustedAdvisorCheckSummariesRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckSummaries operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorCheckSummaries for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckSummaries method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorCheckSummariesRequest method.
req, resp := client.DescribeTrustedAdvisorCheckSummariesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummaries

func (*Support) DescribeTrustedAdvisorCheckSummariesWithContext ¶

func (c *Support) DescribeTrustedAdvisorCheckSummariesWithContext(ctx aws.Context, input *DescribeTrustedAdvisorCheckSummariesInput, opts ...request.Option) (*DescribeTrustedAdvisorCheckSummariesOutput, error)

DescribeTrustedAdvisorCheckSummariesWithContext is the same as DescribeTrustedAdvisorCheckSummaries with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorCheckSummaries for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorChecks ¶

func (c *Support) DescribeTrustedAdvisorChecks(input *DescribeTrustedAdvisorChecksInput) (*DescribeTrustedAdvisorChecksOutput, error)

DescribeTrustedAdvisorChecks API operation for AWS Support.

Returns information about all available Trusted Advisor checks, including name, ID, category, description, and metadata. You must specify a language code; English ("en") and Japanese ("ja") are currently supported. The response contains a TrustedAdvisorCheckDescription for each check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorChecks for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecks

func (*Support) DescribeTrustedAdvisorChecksRequest ¶

func (c *Support) DescribeTrustedAdvisorChecksRequest(input *DescribeTrustedAdvisorChecksInput) (req *request.Request, output *DescribeTrustedAdvisorChecksOutput)

DescribeTrustedAdvisorChecksRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorChecks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorChecks for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorChecks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorChecksRequest method.
req, resp := client.DescribeTrustedAdvisorChecksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecks

func (*Support) DescribeTrustedAdvisorChecksWithContext ¶

func (c *Support) DescribeTrustedAdvisorChecksWithContext(ctx aws.Context, input *DescribeTrustedAdvisorChecksInput, opts ...request.Option) (*DescribeTrustedAdvisorChecksOutput, error)

DescribeTrustedAdvisorChecksWithContext is the same as DescribeTrustedAdvisorChecks with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorChecks for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) RefreshTrustedAdvisorCheck ¶

func (c *Support) RefreshTrustedAdvisorCheck(input *RefreshTrustedAdvisorCheckInput) (*RefreshTrustedAdvisorCheckOutput, error)

RefreshTrustedAdvisorCheck API operation for AWS Support.

Requests a refresh of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

Some checks are refreshed automatically, and they cannot be refreshed by using this operation. Use of the RefreshTrustedAdvisorCheck operation for these checks causes an InvalidParameterValue error.

The response contains a TrustedAdvisorCheckRefreshStatus object, which contains these fields:

* status. The refresh status of the check: "none", "enqueued", "processing",
"success", or "abandoned".

* millisUntilNextRefreshable. The amount of time, in milliseconds, until
the check is eligible for refresh.

* checkId. The unique identifier for the check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation RefreshTrustedAdvisorCheck for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheck

func (*Support) RefreshTrustedAdvisorCheckRequest ¶

func (c *Support) RefreshTrustedAdvisorCheckRequest(input *RefreshTrustedAdvisorCheckInput) (req *request.Request, output *RefreshTrustedAdvisorCheckOutput)

RefreshTrustedAdvisorCheckRequest generates a "aws/request.Request" representing the client's request for the RefreshTrustedAdvisorCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See RefreshTrustedAdvisorCheck for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RefreshTrustedAdvisorCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the RefreshTrustedAdvisorCheckRequest method.
req, resp := client.RefreshTrustedAdvisorCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheck

func (*Support) RefreshTrustedAdvisorCheckWithContext ¶

func (c *Support) RefreshTrustedAdvisorCheckWithContext(ctx aws.Context, input *RefreshTrustedAdvisorCheckInput, opts ...request.Option) (*RefreshTrustedAdvisorCheckOutput, error)

RefreshTrustedAdvisorCheckWithContext is the same as RefreshTrustedAdvisorCheck with the addition of the ability to pass a context and additional request options.

See RefreshTrustedAdvisorCheck for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) ResolveCase ¶

func (c *Support) ResolveCase(input *ResolveCaseInput) (*ResolveCaseOutput, error)

ResolveCase API operation for AWS Support.

Takes a caseId and returns the initial state of the case along with the state of the case after the call to ResolveCase completed.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation ResolveCase for usage and error information.

Returned Error Codes:

* ErrCodeInternalServerError "InternalServerError"
An internal server error occurred.

* ErrCodeCaseIdNotFound "CaseIdNotFound"
The requested caseId could not be located.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCase

func (*Support) ResolveCaseRequest ¶

func (c *Support) ResolveCaseRequest(input *ResolveCaseInput) (req *request.Request, output *ResolveCaseOutput)

ResolveCaseRequest generates a "aws/request.Request" representing the client's request for the ResolveCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ResolveCase for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResolveCase method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ResolveCaseRequest method.
req, resp := client.ResolveCaseRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCase

func (*Support) ResolveCaseWithContext ¶

func (c *Support) ResolveCaseWithContext(ctx aws.Context, input *ResolveCaseInput, opts ...request.Option) (*ResolveCaseOutput, error)

ResolveCaseWithContext is the same as ResolveCase with the addition of the ability to pass a context and additional request options.

See ResolveCase for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type TrustedAdvisorCategorySpecificSummary ¶

The container for summary information that relates to the category of the Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCategorySpecificSummary

type TrustedAdvisorCategorySpecificSummary struct {

    // The summary information about cost savings for a Trusted Advisor check that
    // is in the Cost Optimizing category.
    CostOptimizing *TrustedAdvisorCostOptimizingSummary `locationName:"costOptimizing" type:"structure"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorCategorySpecificSummary) GoString ¶

func (s TrustedAdvisorCategorySpecificSummary) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCategorySpecificSummary) SetCostOptimizing ¶

func (s *TrustedAdvisorCategorySpecificSummary) SetCostOptimizing(v *TrustedAdvisorCostOptimizingSummary) *TrustedAdvisorCategorySpecificSummary

SetCostOptimizing sets the CostOptimizing field's value.

func (TrustedAdvisorCategorySpecificSummary) String ¶

func (s TrustedAdvisorCategorySpecificSummary) String() string

String returns the string representation

type TrustedAdvisorCheckDescription ¶

The description and metadata for a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckDescription

type TrustedAdvisorCheckDescription struct {

    // The category of the Trusted Advisor check.
    //
    // Category is a required field
    Category *string `locationName:"category" type:"string" required:"true"`

    // The description of the Trusted Advisor check, which includes the alert criteria
    // and recommended actions (contains HTML markup).
    //
    // Description is a required field
    Description *string `locationName:"description" type:"string" required:"true"`

    // The unique identifier for the Trusted Advisor check.
    //
    // Id is a required field
    Id *string `locationName:"id" type:"string" required:"true"`

    // The column headings for the data returned by the Trusted Advisor check. The
    // order of the headings corresponds to the order of the data in the Metadata
    // element of the TrustedAdvisorResourceDetail for the check. Metadata contains
    // all the data that is shown in the Excel download, even in those cases where
    // the UI shows just summary data.
    //
    // Metadata is a required field
    Metadata []*string `locationName:"metadata" type:"list" required:"true"`

    // The display name for the Trusted Advisor check.
    //
    // Name is a required field
    Name *string `locationName:"name" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorCheckDescription) GoString ¶

func (s TrustedAdvisorCheckDescription) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCheckDescription) SetCategory ¶

func (s *TrustedAdvisorCheckDescription) SetCategory(v string) *TrustedAdvisorCheckDescription

SetCategory sets the Category field's value.

func (*TrustedAdvisorCheckDescription) SetDescription ¶

func (s *TrustedAdvisorCheckDescription) SetDescription(v string) *TrustedAdvisorCheckDescription

SetDescription sets the Description field's value.

func (*TrustedAdvisorCheckDescription) SetId ¶

func (s *TrustedAdvisorCheckDescription) SetId(v string) *TrustedAdvisorCheckDescription

SetId sets the Id field's value.

func (*TrustedAdvisorCheckDescription) SetMetadata ¶

func (s *TrustedAdvisorCheckDescription) SetMetadata(v []*string) *TrustedAdvisorCheckDescription

SetMetadata sets the Metadata field's value.

func (*TrustedAdvisorCheckDescription) SetName ¶

func (s *TrustedAdvisorCheckDescription) SetName(v string) *TrustedAdvisorCheckDescription

SetName sets the Name field's value.

func (TrustedAdvisorCheckDescription) String ¶

func (s TrustedAdvisorCheckDescription) String() string

String returns the string representation

type TrustedAdvisorCheckRefreshStatus ¶

The refresh status of a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckRefreshStatus

type TrustedAdvisorCheckRefreshStatus struct {

    // The unique identifier for the Trusted Advisor check.
    //
    // CheckId is a required field
    CheckId *string `locationName:"checkId" type:"string" required:"true"`

    // The amount of time, in milliseconds, until the Trusted Advisor check is eligible
    // for refresh.
    //
    // MillisUntilNextRefreshable is a required field
    MillisUntilNextRefreshable *int64 `locationName:"millisUntilNextRefreshable" type:"long" required:"true"`

    // The status of the Trusted Advisor check for which a refresh has been requested:
    // "none", "enqueued", "processing", "success", or "abandoned".
    //
    // Status is a required field
    Status *string `locationName:"status" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorCheckRefreshStatus) GoString ¶

func (s TrustedAdvisorCheckRefreshStatus) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCheckRefreshStatus) SetCheckId ¶

func (s *TrustedAdvisorCheckRefreshStatus) SetCheckId(v string) *TrustedAdvisorCheckRefreshStatus

SetCheckId sets the CheckId field's value.

func (*TrustedAdvisorCheckRefreshStatus) SetMillisUntilNextRefreshable ¶

func (s *TrustedAdvisorCheckRefreshStatus) SetMillisUntilNextRefreshable(v int64) *TrustedAdvisorCheckRefreshStatus

SetMillisUntilNextRefreshable sets the MillisUntilNextRefreshable field's value.

func (*TrustedAdvisorCheckRefreshStatus) SetStatus ¶

func (s *TrustedAdvisorCheckRefreshStatus) SetStatus(v string) *TrustedAdvisorCheckRefreshStatus

SetStatus sets the Status field's value.

func (TrustedAdvisorCheckRefreshStatus) String ¶

func (s TrustedAdvisorCheckRefreshStatus) String() string

String returns the string representation

type TrustedAdvisorCheckResult ¶

The results of a Trusted Advisor check returned by DescribeTrustedAdvisorCheckResult. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckResult

type TrustedAdvisorCheckResult struct {

    // Summary information that relates to the category of the check. Cost Optimizing
    // is the only category that is currently supported.
    //
    // CategorySpecificSummary is a required field
    CategorySpecificSummary *TrustedAdvisorCategorySpecificSummary `locationName:"categorySpecificSummary" type:"structure" required:"true"`

    // The unique identifier for the Trusted Advisor check.
    //
    // CheckId is a required field
    CheckId *string `locationName:"checkId" type:"string" required:"true"`

    // The details about each resource listed in the check result.
    //
    // FlaggedResources is a required field
    FlaggedResources []*TrustedAdvisorResourceDetail `locationName:"flaggedResources" type:"list" required:"true"`

    // Details about AWS resources that were analyzed in a call to Trusted Advisor
    // DescribeTrustedAdvisorCheckSummaries.
    //
    // ResourcesSummary is a required field
    ResourcesSummary *TrustedAdvisorResourcesSummary `locationName:"resourcesSummary" type:"structure" required:"true"`

    // The alert status of the check: "ok" (green), "warning" (yellow), "error"
    // (red), or "not_available".
    //
    // Status is a required field
    Status *string `locationName:"status" type:"string" required:"true"`

    // The time of the last refresh of the check.
    //
    // Timestamp is a required field
    Timestamp *string `locationName:"timestamp" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorCheckResult) GoString ¶

func (s TrustedAdvisorCheckResult) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCheckResult) SetCategorySpecificSummary ¶

func (s *TrustedAdvisorCheckResult) SetCategorySpecificSummary(v *TrustedAdvisorCategorySpecificSummary) *TrustedAdvisorCheckResult

SetCategorySpecificSummary sets the CategorySpecificSummary field's value.

func (*TrustedAdvisorCheckResult) SetCheckId ¶

func (s *TrustedAdvisorCheckResult) SetCheckId(v string) *TrustedAdvisorCheckResult

SetCheckId sets the CheckId field's value.

func (*TrustedAdvisorCheckResult) SetFlaggedResources ¶

func (s *TrustedAdvisorCheckResult) SetFlaggedResources(v []*TrustedAdvisorResourceDetail) *TrustedAdvisorCheckResult

SetFlaggedResources sets the FlaggedResources field's value.

func (*TrustedAdvisorCheckResult) SetResourcesSummary ¶

func (s *TrustedAdvisorCheckResult) SetResourcesSummary(v *TrustedAdvisorResourcesSummary) *TrustedAdvisorCheckResult

SetResourcesSummary sets the ResourcesSummary field's value.

func (*TrustedAdvisorCheckResult) SetStatus ¶

func (s *TrustedAdvisorCheckResult) SetStatus(v string) *TrustedAdvisorCheckResult

SetStatus sets the Status field's value.

func (*TrustedAdvisorCheckResult) SetTimestamp ¶

func (s *TrustedAdvisorCheckResult) SetTimestamp(v string) *TrustedAdvisorCheckResult

SetTimestamp sets the Timestamp field's value.

func (TrustedAdvisorCheckResult) String ¶

func (s TrustedAdvisorCheckResult) String() string

String returns the string representation

type TrustedAdvisorCheckSummary ¶

A summary of a Trusted Advisor check result, including the alert status, last refresh, and number of resources examined. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckSummary

type TrustedAdvisorCheckSummary struct {

    // Summary information that relates to the category of the check. Cost Optimizing
    // is the only category that is currently supported.
    //
    // CategorySpecificSummary is a required field
    CategorySpecificSummary *TrustedAdvisorCategorySpecificSummary `locationName:"categorySpecificSummary" type:"structure" required:"true"`

    // The unique identifier for the Trusted Advisor check.
    //
    // CheckId is a required field
    CheckId *string `locationName:"checkId" type:"string" required:"true"`

    // Specifies whether the Trusted Advisor check has flagged resources.
    HasFlaggedResources *bool `locationName:"hasFlaggedResources" type:"boolean"`

    // Details about AWS resources that were analyzed in a call to Trusted Advisor
    // DescribeTrustedAdvisorCheckSummaries.
    //
    // ResourcesSummary is a required field
    ResourcesSummary *TrustedAdvisorResourcesSummary `locationName:"resourcesSummary" type:"structure" required:"true"`

    // The alert status of the check: "ok" (green), "warning" (yellow), "error"
    // (red), or "not_available".
    //
    // Status is a required field
    Status *string `locationName:"status" type:"string" required:"true"`

    // The time of the last refresh of the check.
    //
    // Timestamp is a required field
    Timestamp *string `locationName:"timestamp" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorCheckSummary) GoString ¶

func (s TrustedAdvisorCheckSummary) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCheckSummary) SetCategorySpecificSummary ¶

func (s *TrustedAdvisorCheckSummary) SetCategorySpecificSummary(v *TrustedAdvisorCategorySpecificSummary) *TrustedAdvisorCheckSummary

SetCategorySpecificSummary sets the CategorySpecificSummary field's value.

func (*TrustedAdvisorCheckSummary) SetCheckId ¶

func (s *TrustedAdvisorCheckSummary) SetCheckId(v string) *TrustedAdvisorCheckSummary

SetCheckId sets the CheckId field's value.

func (*TrustedAdvisorCheckSummary) SetHasFlaggedResources ¶

func (s *TrustedAdvisorCheckSummary) SetHasFlaggedResources(v bool) *TrustedAdvisorCheckSummary

SetHasFlaggedResources sets the HasFlaggedResources field's value.

func (*TrustedAdvisorCheckSummary) SetResourcesSummary ¶

func (s *TrustedAdvisorCheckSummary) SetResourcesSummary(v *TrustedAdvisorResourcesSummary) *TrustedAdvisorCheckSummary

SetResourcesSummary sets the ResourcesSummary field's value.

func (*TrustedAdvisorCheckSummary) SetStatus ¶

func (s *TrustedAdvisorCheckSummary) SetStatus(v string) *TrustedAdvisorCheckSummary

SetStatus sets the Status field's value.

func (*TrustedAdvisorCheckSummary) SetTimestamp ¶

func (s *TrustedAdvisorCheckSummary) SetTimestamp(v string) *TrustedAdvisorCheckSummary

SetTimestamp sets the Timestamp field's value.

func (TrustedAdvisorCheckSummary) String ¶

func (s TrustedAdvisorCheckSummary) String() string

String returns the string representation

type TrustedAdvisorCostOptimizingSummary ¶

The estimated cost savings that might be realized if the recommended actions are taken. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCostOptimizingSummary

type TrustedAdvisorCostOptimizingSummary struct {

    // The estimated monthly savings that might be realized if the recommended actions
    // are taken.
    //
    // EstimatedMonthlySavings is a required field
    EstimatedMonthlySavings *float64 `locationName:"estimatedMonthlySavings" type:"double" required:"true"`

    // The estimated percentage of savings that might be realized if the recommended
    // actions are taken.
    //
    // EstimatedPercentMonthlySavings is a required field
    EstimatedPercentMonthlySavings *float64 `locationName:"estimatedPercentMonthlySavings" type:"double" required:"true"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorCostOptimizingSummary) GoString ¶

func (s TrustedAdvisorCostOptimizingSummary) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCostOptimizingSummary) SetEstimatedMonthlySavings ¶

func (s *TrustedAdvisorCostOptimizingSummary) SetEstimatedMonthlySavings(v float64) *TrustedAdvisorCostOptimizingSummary

SetEstimatedMonthlySavings sets the EstimatedMonthlySavings field's value.

func (*TrustedAdvisorCostOptimizingSummary) SetEstimatedPercentMonthlySavings ¶

func (s *TrustedAdvisorCostOptimizingSummary) SetEstimatedPercentMonthlySavings(v float64) *TrustedAdvisorCostOptimizingSummary

SetEstimatedPercentMonthlySavings sets the EstimatedPercentMonthlySavings field's value.

func (TrustedAdvisorCostOptimizingSummary) String ¶

func (s TrustedAdvisorCostOptimizingSummary) String() string

String returns the string representation

type TrustedAdvisorResourceDetail ¶

Contains information about a resource identified by a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorResourceDetail

type TrustedAdvisorResourceDetail struct {

    // Specifies whether the AWS resource was ignored by Trusted Advisor because
    // it was marked as suppressed by the user.
    IsSuppressed *bool `locationName:"isSuppressed" type:"boolean"`

    // Additional information about the identified resource. The exact metadata
    // and its order can be obtained by inspecting the TrustedAdvisorCheckDescription
    // object returned by the call to DescribeTrustedAdvisorChecks. Metadata contains
    // all the data that is shown in the Excel download, even in those cases where
    // the UI shows just summary data.
    //
    // Metadata is a required field
    Metadata []*string `locationName:"metadata" type:"list" required:"true"`

    // The AWS region in which the identified resource is located.
    Region *string `locationName:"region" type:"string"`

    // The unique identifier for the identified resource.
    //
    // ResourceId is a required field
    ResourceId *string `locationName:"resourceId" type:"string" required:"true"`

    // The status code for the resource identified in the Trusted Advisor check.
    //
    // Status is a required field
    Status *string `locationName:"status" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorResourceDetail) GoString ¶

func (s TrustedAdvisorResourceDetail) GoString() string

GoString returns the string representation

func (*TrustedAdvisorResourceDetail) SetIsSuppressed ¶

func (s *TrustedAdvisorResourceDetail) SetIsSuppressed(v bool) *TrustedAdvisorResourceDetail

SetIsSuppressed sets the IsSuppressed field's value.

func (*TrustedAdvisorResourceDetail) SetMetadata ¶

func (s *TrustedAdvisorResourceDetail) SetMetadata(v []*string) *TrustedAdvisorResourceDetail

SetMetadata sets the Metadata field's value.

func (*TrustedAdvisorResourceDetail) SetRegion ¶

func (s *TrustedAdvisorResourceDetail) SetRegion(v string) *TrustedAdvisorResourceDetail

SetRegion sets the Region field's value.

func (*TrustedAdvisorResourceDetail) SetResourceId ¶

func (s *TrustedAdvisorResourceDetail) SetResourceId(v string) *TrustedAdvisorResourceDetail

SetResourceId sets the ResourceId field's value.

func (*TrustedAdvisorResourceDetail) SetStatus ¶

func (s *TrustedAdvisorResourceDetail) SetStatus(v string) *TrustedAdvisorResourceDetail

SetStatus sets the Status field's value.

func (TrustedAdvisorResourceDetail) String ¶

func (s TrustedAdvisorResourceDetail) String() string

String returns the string representation

type TrustedAdvisorResourcesSummary ¶

Details about AWS resources that were analyzed in a call to Trusted Advisor DescribeTrustedAdvisorCheckSummaries. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorResourcesSummary

type TrustedAdvisorResourcesSummary struct {

    // The number of AWS resources that were flagged (listed) by the Trusted Advisor
    // check.
    //
    // ResourcesFlagged is a required field
    ResourcesFlagged *int64 `locationName:"resourcesFlagged" type:"long" required:"true"`

    // The number of AWS resources ignored by Trusted Advisor because information
    // was unavailable.
    //
    // ResourcesIgnored is a required field
    ResourcesIgnored *int64 `locationName:"resourcesIgnored" type:"long" required:"true"`

    // The number of AWS resources that were analyzed by the Trusted Advisor check.
    //
    // ResourcesProcessed is a required field
    ResourcesProcessed *int64 `locationName:"resourcesProcessed" type:"long" required:"true"`

    // The number of AWS resources ignored by Trusted Advisor because they were
    // marked as suppressed by the user.
    //
    // ResourcesSuppressed is a required field
    ResourcesSuppressed *int64 `locationName:"resourcesSuppressed" type:"long" required:"true"`
    // contains filtered or unexported fields
}

func (TrustedAdvisorResourcesSummary) GoString ¶

func (s TrustedAdvisorResourcesSummary) GoString() string

GoString returns the string representation

func (*TrustedAdvisorResourcesSummary) SetResourcesFlagged ¶

func (s *TrustedAdvisorResourcesSummary) SetResourcesFlagged(v int64) *TrustedAdvisorResourcesSummary

SetResourcesFlagged sets the ResourcesFlagged field's value.

func (*TrustedAdvisorResourcesSummary) SetResourcesIgnored ¶

func (s *TrustedAdvisorResourcesSummary) SetResourcesIgnored(v int64) *TrustedAdvisorResourcesSummary

SetResourcesIgnored sets the ResourcesIgnored field's value.

func (*TrustedAdvisorResourcesSummary) SetResourcesProcessed ¶

func (s *TrustedAdvisorResourcesSummary) SetResourcesProcessed(v int64) *TrustedAdvisorResourcesSummary

SetResourcesProcessed sets the ResourcesProcessed field's value.

func (*TrustedAdvisorResourcesSummary) SetResourcesSuppressed ¶

func (s *TrustedAdvisorResourcesSummary) SetResourcesSuppressed(v int64) *TrustedAdvisorResourcesSummary

SetResourcesSuppressed sets the ResourcesSuppressed field's value.

func (TrustedAdvisorResourcesSummary) String ¶

func (s TrustedAdvisorResourcesSummary) String() string

String returns the string representation

Subdirectories