Package ecs

// Create a session to share configuration, and load external configuration.
sess := session.Must(session.NewSession())

// Create the service's client with the session.
svc := ecs.New(sess)

result, err := svc.CreateCluster(params)
if err != nil {
    // Cast err to awserr.Error to handle specific error codes.
    aerr, ok := err.(awserr.Error)
    if ok && aerr.Code() == <error code to check for> {
        // Specific error code handling
    }
    return err
}

fmt.Println("CreateCluster result:")
fmt.Println(result)

ctx := context.Background()

result, err := svc.CreateClusterWithContext(ctx, params)

Constants

const (
    // AgentUpdateStatusPending is a AgentUpdateStatus enum value
    AgentUpdateStatusPending = "PENDING"

    // AgentUpdateStatusStaging is a AgentUpdateStatus enum value
    AgentUpdateStatusStaging = "STAGING"

    // AgentUpdateStatusStaged is a AgentUpdateStatus enum value
    AgentUpdateStatusStaged = "STAGED"

    // AgentUpdateStatusUpdating is a AgentUpdateStatus enum value
    AgentUpdateStatusUpdating = "UPDATING"

    // AgentUpdateStatusUpdated is a AgentUpdateStatus enum value
    AgentUpdateStatusUpdated = "UPDATED"

    // AgentUpdateStatusFailed is a AgentUpdateStatus enum value
    AgentUpdateStatusFailed = "FAILED"
)

const (
    // ContainerInstanceStatusActive is a ContainerInstanceStatus enum value
    ContainerInstanceStatusActive = "ACTIVE"

    // ContainerInstanceStatusDraining is a ContainerInstanceStatus enum value
    ContainerInstanceStatusDraining = "DRAINING"
)

const (
    // DesiredStatusRunning is a DesiredStatus enum value
    DesiredStatusRunning = "RUNNING"

    // DesiredStatusPending is a DesiredStatus enum value
    DesiredStatusPending = "PENDING"

    // DesiredStatusStopped is a DesiredStatus enum value
    DesiredStatusStopped = "STOPPED"
)

const (
    // LogDriverJsonFile is a LogDriver enum value
    LogDriverJsonFile = "json-file"

    // LogDriverSyslog is a LogDriver enum value
    LogDriverSyslog = "syslog"

    // LogDriverJournald is a LogDriver enum value
    LogDriverJournald = "journald"

    // LogDriverGelf is a LogDriver enum value
    LogDriverGelf = "gelf"

    // LogDriverFluentd is a LogDriver enum value
    LogDriverFluentd = "fluentd"

    // LogDriverAwslogs is a LogDriver enum value
    LogDriverAwslogs = "awslogs"

    // LogDriverSplunk is a LogDriver enum value
    LogDriverSplunk = "splunk"
)

const (
    // NetworkModeBridge is a NetworkMode enum value
    NetworkModeBridge = "bridge"

    // NetworkModeHost is a NetworkMode enum value
    NetworkModeHost = "host"

    // NetworkModeNone is a NetworkMode enum value
    NetworkModeNone = "none"
)

const (
    // PlacementConstraintTypeDistinctInstance is a PlacementConstraintType enum value
    PlacementConstraintTypeDistinctInstance = "distinctInstance"

    // PlacementConstraintTypeMemberOf is a PlacementConstraintType enum value
    PlacementConstraintTypeMemberOf = "memberOf"
)

const (
    // PlacementStrategyTypeRandom is a PlacementStrategyType enum value
    PlacementStrategyTypeRandom = "random"

    // PlacementStrategyTypeSpread is a PlacementStrategyType enum value
    PlacementStrategyTypeSpread = "spread"

    // PlacementStrategyTypeBinpack is a PlacementStrategyType enum value
    PlacementStrategyTypeBinpack = "binpack"
)

const (
    // SortOrderAsc is a SortOrder enum value
    SortOrderAsc = "ASC"

    // SortOrderDesc is a SortOrder enum value
    SortOrderDesc = "DESC"
)

const (
    // TaskDefinitionFamilyStatusActive is a TaskDefinitionFamilyStatus enum value
    TaskDefinitionFamilyStatusActive = "ACTIVE"

    // TaskDefinitionFamilyStatusInactive is a TaskDefinitionFamilyStatus enum value
    TaskDefinitionFamilyStatusInactive = "INACTIVE"

    // TaskDefinitionFamilyStatusAll is a TaskDefinitionFamilyStatus enum value
    TaskDefinitionFamilyStatusAll = "ALL"
)

const (
    // TaskDefinitionStatusActive is a TaskDefinitionStatus enum value
    TaskDefinitionStatusActive = "ACTIVE"

    // TaskDefinitionStatusInactive is a TaskDefinitionStatus enum value
    TaskDefinitionStatusInactive = "INACTIVE"
)

const (
    // TransportProtocolTcp is a TransportProtocol enum value
    TransportProtocolTcp = "tcp"

    // TransportProtocolUdp is a TransportProtocol enum value
    TransportProtocolUdp = "udp"
)

const (
    // UlimitNameCore is a UlimitName enum value
    UlimitNameCore = "core"

    // UlimitNameCpu is a UlimitName enum value
    UlimitNameCpu = "cpu"

    // UlimitNameData is a UlimitName enum value
    UlimitNameData = "data"

    // UlimitNameFsize is a UlimitName enum value
    UlimitNameFsize = "fsize"

    // UlimitNameLocks is a UlimitName enum value
    UlimitNameLocks = "locks"

    // UlimitNameMemlock is a UlimitName enum value
    UlimitNameMemlock = "memlock"

    // UlimitNameMsgqueue is a UlimitName enum value
    UlimitNameMsgqueue = "msgqueue"

    // UlimitNameNice is a UlimitName enum value
    UlimitNameNice = "nice"

    // UlimitNameNofile is a UlimitName enum value
    UlimitNameNofile = "nofile"

    // UlimitNameNproc is a UlimitName enum value
    UlimitNameNproc = "nproc"

    // UlimitNameRss is a UlimitName enum value
    UlimitNameRss = "rss"

    // UlimitNameRtprio is a UlimitName enum value
    UlimitNameRtprio = "rtprio"

    // UlimitNameRttime is a UlimitName enum value
    UlimitNameRttime = "rttime"

    // UlimitNameSigpending is a UlimitName enum value
    UlimitNameSigpending = "sigpending"

    // UlimitNameStack is a UlimitName enum value
    UlimitNameStack = "stack"
)

const (

    // ErrCodeAttributeLimitExceededException for service response error code
    // "AttributeLimitExceededException".
    //
    // You can apply up to 10 custom attributes per resource. You can view the attributes
    // of a resource with ListAttributes. You can remove existing attributes on
    // a resource with DeleteAttributes.
    ErrCodeAttributeLimitExceededException = "AttributeLimitExceededException"

    // ErrCodeClientException for service response error code
    // "ClientException".
    //
    // These errors are usually caused by a client action, such as using an action
    // or resource on behalf of a user that doesn't have permission to use the action
    // or resource, or specifying an identifier that is not valid.
    ErrCodeClientException = "ClientException"

    // ErrCodeClusterContainsContainerInstancesException for service response error code
    // "ClusterContainsContainerInstancesException".
    //
    // You cannot delete a cluster that has registered container instances. You
    // must first deregister the container instances before you can delete the cluster.
    // For more information, see DeregisterContainerInstance.
    ErrCodeClusterContainsContainerInstancesException = "ClusterContainsContainerInstancesException"

    // ErrCodeClusterContainsServicesException for service response error code
    // "ClusterContainsServicesException".
    //
    // You cannot delete a cluster that contains services. You must first update
    // the service to reduce its desired task count to 0 and then delete the service.
    // For more information, see UpdateService and DeleteService.
    ErrCodeClusterContainsServicesException = "ClusterContainsServicesException"

    // ErrCodeClusterNotFoundException for service response error code
    // "ClusterNotFoundException".
    //
    // The specified cluster could not be found. You can view your available clusters
    // with ListClusters. Amazon ECS clusters are region-specific.
    ErrCodeClusterNotFoundException = "ClusterNotFoundException"

    // ErrCodeInvalidParameterException for service response error code
    // "InvalidParameterException".
    //
    // The specified parameter is invalid. Review the available parameters for the
    // API request.
    ErrCodeInvalidParameterException = "InvalidParameterException"

    // ErrCodeMissingVersionException for service response error code
    // "MissingVersionException".
    //
    // Amazon ECS is unable to determine the current version of the Amazon ECS container
    // agent on the container instance and does not have enough information to proceed
    // with an update. This could be because the agent running on the container
    // instance is an older or custom version that does not use our version information.
    ErrCodeMissingVersionException = "MissingVersionException"

    // ErrCodeNoUpdateAvailableException for service response error code
    // "NoUpdateAvailableException".
    //
    // There is no update available for this Amazon ECS container agent. This could
    // be because the agent is already running the latest version, or it is so old
    // that there is no update path to the current version.
    ErrCodeNoUpdateAvailableException = "NoUpdateAvailableException"

    // ErrCodeServerException for service response error code
    // "ServerException".
    //
    // These errors are usually caused by a server issue.
    ErrCodeServerException = "ServerException"

    // ErrCodeServiceNotActiveException for service response error code
    // "ServiceNotActiveException".
    //
    // The specified service is not active. You cannot update a service that is
    // not active. If you have previously deleted a service, you can re-create it
    // with CreateService.
    ErrCodeServiceNotActiveException = "ServiceNotActiveException"

    // ErrCodeServiceNotFoundException for service response error code
    // "ServiceNotFoundException".
    //
    // The specified service could not be found. You can view your available services
    // with ListServices. Amazon ECS services are cluster-specific and region-specific.
    ErrCodeServiceNotFoundException = "ServiceNotFoundException"

    // ErrCodeTargetNotFoundException for service response error code
    // "TargetNotFoundException".
    //
    // The specified target could not be found. You can view your available container
    // instances with ListContainerInstances. Amazon ECS container instances are
    // cluster-specific and region-specific.
    ErrCodeTargetNotFoundException = "TargetNotFoundException"

    // ErrCodeUpdateInProgressException for service response error code
    // "UpdateInProgressException".
    //
    // There is already a current Amazon ECS container agent update in progress
    // on the specified container instance. If the container agent becomes disconnected
    // while it is in a transitional stage, such as PENDING or STAGING, the update
    // process can get stuck in that state. However, when the agent reconnects,
    // it resumes where it stopped previously.
    ErrCodeUpdateInProgressException = "UpdateInProgressException"
)

Service information constants

const (
    ServiceName = "ecs"       // Service endpoint prefix API calls made to.
    EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

const (
    // TargetTypeContainerInstance is a TargetType enum value
    TargetTypeContainerInstance = "container-instance"
)

const (
    // TaskDefinitionPlacementConstraintTypeMemberOf is a TaskDefinitionPlacementConstraintType enum value
    TaskDefinitionPlacementConstraintTypeMemberOf = "memberOf"
)

type Attribute ¶

An attribute is a name-value pair associated with an Amazon ECS object. Attributes enable you to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html#attributes) in the Amazon EC2 Container Service Developer Guide. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Attribute

type Attribute struct {

    // The name of the attribute. Up to 128 letters (uppercase and lowercase), numbers,
    // hyphens, underscores, and periods are allowed.
    //
    // Name is a required field
    Name *string `locationName:"name" type:"string" required:"true"`

    // The ID of the target. You can specify the short form ID for a resource or
    // the full Amazon Resource Name (ARN).
    TargetId *string `locationName:"targetId" type:"string"`

    // The type of the target with which to attach the attribute. This parameter
    // is required if you use the short form ID for a resource instead of the full
    // Amazon Resource Name (ARN).
    TargetType *string `locationName:"targetType" type:"string" enum:"TargetType"`

    // The value of the attribute. Up to 128 letters (uppercase and lowercase),
    // numbers, hyphens, underscores, periods, at signs (@), forward slashes, colons,
    // and spaces are allowed.
    Value *string `locationName:"value" type:"string"`
    // contains filtered or unexported fields
}

func (Attribute) GoString ¶

func (s Attribute) GoString() string

GoString returns the string representation

func (*Attribute) SetName ¶

func (s *Attribute) SetName(v string) *Attribute

SetName sets the Name field's value.

func (*Attribute) SetTargetId ¶

func (s *Attribute) SetTargetId(v string) *Attribute

SetTargetId sets the TargetId field's value.

func (*Attribute) SetTargetType ¶

func (s *Attribute) SetTargetType(v string) *Attribute

SetTargetType sets the TargetType field's value.

func (*Attribute) SetValue ¶

func (s *Attribute) SetValue(v string) *Attribute

SetValue sets the Value field's value.

func (Attribute) String ¶

func (s Attribute) String() string

String returns the string representation

func (*Attribute) Validate ¶

func (s *Attribute) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type Cluster ¶

A regional grouping of one or more container instances on which you can run task requests. Each account receives a default cluster the first time you use the Amazon ECS service, but you may also create other clusters. Clusters may contain more than one instance type simultaneously. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Cluster

type Cluster struct {

    // The number of services that are running on the cluster in an ACTIVE state.
    // You can view these services with ListServices.
    ActiveServicesCount *int64 `locationName:"activeServicesCount" type:"integer"`

    // The Amazon Resource Name (ARN) that identifies the cluster. The ARN contains
    // the arn:aws:ecs namespace, followed by the region of the cluster, the AWS
    // account ID of the cluster owner, the cluster namespace, and then the cluster
    // name. For example, arn:aws:ecs:region:012345678910:cluster/test..
    ClusterArn *string `locationName:"clusterArn" type:"string"`

    // A user-generated string that you use to identify your cluster.
    ClusterName *string `locationName:"clusterName" type:"string"`

    // The number of tasks in the cluster that are in the PENDING state.
    PendingTasksCount *int64 `locationName:"pendingTasksCount" type:"integer"`

    // The number of container instances registered into the cluster.
    RegisteredContainerInstancesCount *int64 `locationName:"registeredContainerInstancesCount" type:"integer"`

    // The number of tasks in the cluster that are in the RUNNING state.
    RunningTasksCount *int64 `locationName:"runningTasksCount" type:"integer"`

    // The status of the cluster. The valid values are ACTIVE or INACTIVE. ACTIVE
    // indicates that you can register container instances with the cluster and
    // the associated instances can accept tasks.
    Status *string `locationName:"status" type:"string"`
    // contains filtered or unexported fields
}

func (Cluster) GoString ¶

func (s Cluster) GoString() string

GoString returns the string representation

func (*Cluster) SetActiveServicesCount ¶

func (s *Cluster) SetActiveServicesCount(v int64) *Cluster

SetActiveServicesCount sets the ActiveServicesCount field's value.

func (*Cluster) SetClusterArn ¶

func (s *Cluster) SetClusterArn(v string) *Cluster

SetClusterArn sets the ClusterArn field's value.

func (*Cluster) SetClusterName ¶

func (s *Cluster) SetClusterName(v string) *Cluster

SetClusterName sets the ClusterName field's value.

func (*Cluster) SetPendingTasksCount ¶

func (s *Cluster) SetPendingTasksCount(v int64) *Cluster

SetPendingTasksCount sets the PendingTasksCount field's value.

func (*Cluster) SetRegisteredContainerInstancesCount ¶

func (s *Cluster) SetRegisteredContainerInstancesCount(v int64) *Cluster

SetRegisteredContainerInstancesCount sets the RegisteredContainerInstancesCount field's value.

func (*Cluster) SetRunningTasksCount ¶

func (s *Cluster) SetRunningTasksCount(v int64) *Cluster

SetRunningTasksCount sets the RunningTasksCount field's value.

func (*Cluster) SetStatus ¶

func (s *Cluster) SetStatus(v string) *Cluster

SetStatus sets the Status field's value.

func (Cluster) String ¶

func (s Cluster) String() string

String returns the string representation

type Container ¶

A Docker container that is part of a task. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Container

type Container struct {

    // The Amazon Resource Name (ARN) of the container.
    ContainerArn *string `locationName:"containerArn" type:"string"`

    // The exit code returned from the container.
    ExitCode *int64 `locationName:"exitCode" type:"integer"`

    // The last known status of the container.
    LastStatus *string `locationName:"lastStatus" type:"string"`

    // The name of the container.
    Name *string `locationName:"name" type:"string"`

    // The network bindings associated with the container.
    NetworkBindings []*NetworkBinding `locationName:"networkBindings" type:"list"`

    // A short (255 max characters) human-readable string to provide additional
    // details about a running or stopped container.
    Reason *string `locationName:"reason" type:"string"`

    // The Amazon Resource Name (ARN) of the task.
    TaskArn *string `locationName:"taskArn" type:"string"`
    // contains filtered or unexported fields
}

func (Container) GoString ¶

func (s Container) GoString() string

GoString returns the string representation

func (*Container) SetContainerArn ¶

func (s *Container) SetContainerArn(v string) *Container

SetContainerArn sets the ContainerArn field's value.

func (*Container) SetExitCode ¶

func (s *Container) SetExitCode(v int64) *Container

SetExitCode sets the ExitCode field's value.

func (*Container) SetLastStatus ¶

func (s *Container) SetLastStatus(v string) *Container

SetLastStatus sets the LastStatus field's value.

func (*Container) SetName ¶

func (s *Container) SetName(v string) *Container

SetName sets the Name field's value.

func (*Container) SetNetworkBindings ¶

func (s *Container) SetNetworkBindings(v []*NetworkBinding) *Container

SetNetworkBindings sets the NetworkBindings field's value.

func (*Container) SetReason ¶

func (s *Container) SetReason(v string) *Container

SetReason sets the Reason field's value.

func (*Container) SetTaskArn ¶

func (s *Container) SetTaskArn(v string) *Container

SetTaskArn sets the TaskArn field's value.

func (Container) String ¶

func (s Container) String() string

String returns the string representation

type ContainerDefinition ¶

Container definitions are used in task definitions to describe the different containers that are launched as part of a task. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ContainerDefinition

type ContainerDefinition struct {

    // The command that is passed to the container. This parameter maps to Cmd in
    // the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the COMMAND parameter to docker run (https://docs.docker.com/engine/reference/run/).
    // For more information, see https://docs.docker.com/engine/reference/builder/#cmd
    // (https://docs.docker.com/engine/reference/builder/#cmd).
    Command []*string `locationName:"command" type:"list"`

    // The number of cpu units reserved for the container. A container instance
    // has 1,024 cpu units for every CPU core. This parameter specifies the minimum
    // amount of CPU to reserve for a container, and containers share unallocated
    // CPU units with other containers on the instance with the same ratio as their
    // allocated amount. This parameter maps to CpuShares in the Create a container
    // (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --cpu-shares option to docker run (https://docs.docker.com/engine/reference/run/).
    //
    // You can determine the number of CPU units that are available per EC2 instance
    // type by multiplying the vCPUs listed for that instance type on the Amazon
    // EC2 Instances (http://aws.amazon.com/ec2/instance-types/) detail page by
    // 1,024.
    //
    // For example, if you run a single-container task on a single-core instance
    // type with 512 CPU units specified for that container, and that is the only
    // task running on the container instance, that container could use the full
    // 1,024 CPU unit share at any given time. However, if you launched another
    // copy of the same task on that container instance, each task would be guaranteed
    // a minimum of 512 CPU units when needed, and each container could float to
    // higher CPU usage if the other container was not using it, but if both tasks
    // were 100% active all of the time, they would be limited to 512 CPU units.
    //
    // The Docker daemon on the container instance uses the CPU value to calculate
    // the relative CPU share ratios for running containers. For more information,
    // see CPU share constraint (https://docs.docker.com/engine/reference/run/#cpu-share-constraint)
    // in the Docker documentation. The minimum valid CPU share value that the Linux
    // kernel allows is 2; however, the CPU parameter is not required, and you can
    // use CPU values below 2 in your container definitions. For CPU values below
    // 2 (including null), the behavior varies based on your Amazon ECS container
    // agent version:
    //
    //    * Agent versions less than or equal to 1.1.0: Null and zero CPU values
    //    are passed to Docker as 0, which Docker then converts to 1,024 CPU shares.
    //    CPU values of 1 are passed to Docker as 1, which the Linux kernel converts
    //    to 2 CPU shares.
    //
    //    * Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values
    //    of 1 are passed to Docker as 2.
    Cpu *int64 `locationName:"cpu" type:"integer"`

    // When this parameter is true, networking is disabled within the container.
    // This parameter maps to NetworkDisabled in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/).
    DisableNetworking *bool `locationName:"disableNetworking" type:"boolean"`

    // A list of DNS search domains that are presented to the container. This parameter
    // maps to DnsSearch in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --dns-search option to docker run (https://docs.docker.com/engine/reference/run/).
    DnsSearchDomains []*string `locationName:"dnsSearchDomains" type:"list"`

    // A list of DNS servers that are presented to the container. This parameter
    // maps to Dns in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --dns option to docker run (https://docs.docker.com/engine/reference/run/).
    DnsServers []*string `locationName:"dnsServers" type:"list"`

    // A key/value map of labels to add to the container. This parameter maps to
    // Labels in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --label option to docker run (https://docs.docker.com/engine/reference/run/).
    // This parameter requires version 1.18 of the Docker Remote API or greater
    // on your container instance. To check the Docker Remote API version on your
    // container instance, log into your container instance and run the following
    // command: sudo docker version | grep "Server API version"
    DockerLabels map[string]*string `locationName:"dockerLabels" type:"map"`

    // A list of strings to provide custom labels for SELinux and AppArmor multi-level
    // security systems. This parameter maps to SecurityOpt in the Create a container
    // (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --security-opt option to docker run (https://docs.docker.com/engine/reference/run/).
    //
    // The Amazon ECS container agent running on a container instance must register
    // with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment
    // variables before containers placed on that instance can use these security
    // options. For more information, see Amazon ECS Container Agent Configuration
    // (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html)
    // in the Amazon EC2 Container Service Developer Guide.
    DockerSecurityOptions []*string `locationName:"dockerSecurityOptions" type:"list"`

    // Early versions of the Amazon ECS container agent do not properly handle entryPoint
    // parameters. If you have problems using entryPoint, update your container
    // agent or enter your commands and arguments as command array items instead.
    //
    // The entry point that is passed to the container. This parameter maps to Entrypoint
    // in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --entrypoint option to docker run (https://docs.docker.com/engine/reference/run/).
    // For more information, see https://docs.docker.com/engine/reference/builder/#entrypoint
    // (https://docs.docker.com/engine/reference/builder/#entrypoint).
    EntryPoint []*string `locationName:"entryPoint" type:"list"`

    // The environment variables to pass to a container. This parameter maps to
    // Env in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --env option to docker run (https://docs.docker.com/engine/reference/run/).
    //
    // We do not recommend using plain text environment variables for sensitive
    // information, such as credential data.
    Environment []*KeyValuePair `locationName:"environment" type:"list"`

    // If the essential parameter of a container is marked as true, and that container
    // fails or stops for any reason, all other containers that are part of the
    // task are stopped. If the essential parameter of a container is marked as
    // false, then its failure does not affect the rest of the containers in a task.
    // If this parameter is omitted, a container is assumed to be essential.
    //
    // All tasks must have at least one essential container. If you have an application
    // that is composed of multiple containers, you should group containers that
    // are used for a common purpose into components, and separate the different
    // components into multiple task definitions. For more information, see Application
    // Architecture (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/application_architecture.html)
    // in the Amazon EC2 Container Service Developer Guide.
    Essential *bool `locationName:"essential" type:"boolean"`

    // A list of hostnames and IP address mappings to append to the /etc/hosts file
    // on the container. This parameter maps to ExtraHosts in the Create a container
    // (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --add-host option to docker run (https://docs.docker.com/engine/reference/run/).
    ExtraHosts []*HostEntry `locationName:"extraHosts" type:"list"`

    // The hostname to use for your container. This parameter maps to Hostname in
    // the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --hostname option to docker run (https://docs.docker.com/engine/reference/run/).
    Hostname *string `locationName:"hostname" type:"string"`

    // The image used to start a container. This string is passed directly to the
    // Docker daemon. Images in the Docker Hub registry are available by default.
    // Other repositories are specified with repository-url/image:tag. Up to 255
    // letters (uppercase and lowercase), numbers, hyphens, underscores, colons,
    // periods, forward slashes, and number signs are allowed. This parameter maps
    // to Image in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the IMAGE parameter of docker run (https://docs.docker.com/engine/reference/run/).
    //
    //    * Images in Amazon ECR repositories use the full registry and repository
    //    URI (for example, 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>).
    //
    //
    //    * Images in official repositories on Docker Hub use a single name (for
    //    example, ubuntu or mongo).
    //
    //    * Images in other repositories on Docker Hub are qualified with an organization
    //    name (for example, amazon/amazon-ecs-agent).
    //
    //    * Images in other online repositories are qualified further by a domain
    //    name (for example, quay.io/assemblyline/ubuntu).
    Image *string `locationName:"image" type:"string"`

    // The link parameter allows containers to communicate with each other without
    // the need for port mappings, using the name parameter and optionally, an alias
    // for the link. This construct is analogous to name:alias in Docker links.
    // Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores
    // are allowed for each name and alias. For more information on linking Docker
    // containers, see https://docs.docker.com/engine/userguide/networking/default_network/dockerlinks/
    // (https://docs.docker.com/engine/userguide/networking/default_network/dockerlinks/).
    // This parameter maps to Links in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --link option to docker run (https://docs.docker.com/engine/reference/run/).
    //
    // Containers that are collocated on a single container instance may be able
    // to communicate with each other without requiring links or host port mappings.
    // Network isolation is achieved on the container instance using security groups
    // and VPC settings.
    Links []*string `locationName:"links" type:"list"`

    // The log configuration specification for the container. This parameter maps
    // to LogConfig in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --log-driver option to docker run (https://docs.docker.com/engine/reference/run/).
    // By default, containers use the same logging driver that the Docker daemon
    // uses; however the container may use a different logging driver than the Docker
    // daemon by specifying a log driver with this parameter in the container definition.
    // To use a different logging driver for a container, the log system must be
    // configured properly on the container instance (or on a different log server
    // for remote logging options). For more information on the options for different
    // supported log drivers, see Configure logging drivers (https://docs.docker.com/engine/admin/logging/overview/)
    // in the Docker documentation.
    //
    // Amazon ECS currently supports a subset of the logging drivers available to
    // the Docker daemon (shown in the LogConfiguration data type). Additional log
    // drivers may be available in future releases of the Amazon ECS container agent.
    //
    // This parameter requires version 1.18 of the Docker Remote API or greater
    // on your container instance. To check the Docker Remote API version on your
    // container instance, log into your container instance and run the following
    // command: sudo docker version | grep "Server API version"
    //
    // The Amazon ECS container agent running on a container instance must register
    // the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS
    // environment variable before containers placed on that instance can use these
    // log configuration options. For more information, see Amazon ECS Container
    // Agent Configuration (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html)
    // in the Amazon EC2 Container Service Developer Guide.
    LogConfiguration *LogConfiguration `locationName:"logConfiguration" type:"structure"`

    // The hard limit (in MiB) of memory to present to the container. If your container
    // attempts to exceed the memory specified here, the container is killed. This
    // parameter maps to Memory in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --memory option to docker run (https://docs.docker.com/engine/reference/run/).
    //
    // You must specify a non-zero integer for one or both of memory or memoryReservation
    // in container definitions. If you specify both, memory must be greater than
    // memoryReservation. If you specify memoryReservation, then that value is subtracted
    // from the available memory resources for the container instance on which the
    // container is placed; otherwise, the value of memory is used.
    //
    // The Docker daemon reserves a minimum of 4 MiB of memory for a container,
    // so you should not specify fewer than 4 MiB of memory for your containers.
    Memory *int64 `locationName:"memory" type:"integer"`

    // The soft limit (in MiB) of memory to reserve for the container. When system
    // memory is under heavy contention, Docker attempts to keep the container memory
    // to this soft limit; however, your container can consume more memory when
    // it needs to, up to either the hard limit specified with the memory parameter
    // (if applicable), or all of the available memory on the container instance,
    // whichever comes first. This parameter maps to MemoryReservation in the Create
    // a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --memory-reservation option to docker run (https://docs.docker.com/engine/reference/run/).
    //
    // You must specify a non-zero integer for one or both of memory or memoryReservation
    // in container definitions. If you specify both, memory must be greater than
    // memoryReservation. If you specify memoryReservation, then that value is subtracted
    // from the available memory resources for the container instance on which the
    // container is placed; otherwise, the value of memory is used.
    //
    // For example, if your container normally uses 128 MiB of memory, but occasionally
    // bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation
    // of 128 MiB, and a memory hard limit of 300 MiB. This configuration would
    // allow the container to only reserve 128 MiB of memory from the remaining
    // resources on the container instance, but also allow the container to consume
    // more memory resources when needed.
    MemoryReservation *int64 `locationName:"memoryReservation" type:"integer"`

    // The mount points for data volumes in your container. This parameter maps
    // to Volumes in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --volume option to docker run (https://docs.docker.com/engine/reference/run/).
    MountPoints []*MountPoint `locationName:"mountPoints" type:"list"`

    // The name of a container. If you are linking multiple containers together
    // in a task definition, the name of one container can be entered in the links
    // of another container to connect the containers. Up to 255 letters (uppercase
    // and lowercase), numbers, hyphens, and underscores are allowed. This parameter
    // maps to name in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --name option to docker run (https://docs.docker.com/engine/reference/run/).
    Name *string `locationName:"name" type:"string"`

    // The list of port mappings for the container. Port mappings allow containers
    // to access ports on the host container instance to send or receive traffic.
    // This parameter maps to PortBindings in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --publish option to docker run (https://docs.docker.com/engine/reference/run/).
    // If the network mode of a task definition is set to none, then you cannot
    // specify port mappings. If the network mode of a task definition is set to
    // host, then host ports must either be undefined or they must match the container
    // port in the port mapping.
    //
    // After a task reaches the RUNNING status, manual and automatic host and container
    // port assignments are visible in the Network Bindings section of a container
    // description of a selected task in the Amazon ECS console, or the networkBindings
    // section DescribeTasks responses.
    PortMappings []*PortMapping `locationName:"portMappings" type:"list"`

    // When this parameter is true, the container is given elevated privileges on
    // the host container instance (similar to the root user). This parameter maps
    // to Privileged in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --privileged option to docker run (https://docs.docker.com/engine/reference/run/).
    Privileged *bool `locationName:"privileged" type:"boolean"`

    // When this parameter is true, the container is given read-only access to its
    // root file system. This parameter maps to ReadonlyRootfs in the Create a container
    // (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --read-only option to docker run.
    ReadonlyRootFilesystem *bool `locationName:"readonlyRootFilesystem" type:"boolean"`

    // A list of ulimits to set in the container. This parameter maps to Ulimits
    // in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --ulimit option to docker run (https://docs.docker.com/engine/reference/run/).
    // Valid naming values are displayed in the Ulimit data type. This parameter
    // requires version 1.18 of the Docker Remote API or greater on your container
    // instance. To check the Docker Remote API version on your container instance,
    // log into your container instance and run the following command: sudo docker
    // version | grep "Server API version"
    Ulimits []*Ulimit `locationName:"ulimits" type:"list"`

    // The user name to use inside the container. This parameter maps to User in
    // the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --user option to docker run (https://docs.docker.com/engine/reference/run/).
    User *string `locationName:"user" type:"string"`

    // Data volumes to mount from another container. This parameter maps to VolumesFrom
    // in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --volumes-from option to docker run (https://docs.docker.com/engine/reference/run/).
    VolumesFrom []*VolumeFrom `locationName:"volumesFrom" type:"list"`

    // The working directory in which to run commands inside the container. This
    // parameter maps to WorkingDir in the Create a container (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/#create-a-container)
    // section of the Docker Remote API (https://docs.docker.com/engine/reference/api/docker_remote_api_v1.23/)
    // and the --workdir option to docker run (https://docs.docker.com/engine/reference/run/).
    WorkingDirectory *string `locationName:"workingDirectory" type:"string"`
    // contains filtered or unexported fields
}

func (ContainerDefinition) GoString ¶

func (s ContainerDefinition) GoString() string

GoString returns the string representation

func (*ContainerDefinition) SetCommand ¶

func (s *ContainerDefinition) SetCommand(v []*string) *ContainerDefinition

SetCommand sets the Command field's value.

func (*ContainerDefinition) SetCpu ¶

func (s *ContainerDefinition) SetCpu(v int64) *ContainerDefinition

SetCpu sets the Cpu field's value.

func (*ContainerDefinition) SetDisableNetworking ¶

func (s *ContainerDefinition) SetDisableNetworking(v bool) *ContainerDefinition

SetDisableNetworking sets the DisableNetworking field's value.

func (*ContainerDefinition) SetDnsSearchDomains ¶

func (s *ContainerDefinition) SetDnsSearchDomains(v []*string) *ContainerDefinition

SetDnsSearchDomains sets the DnsSearchDomains field's value.

func (*ContainerDefinition) SetDnsServers ¶

func (s *ContainerDefinition) SetDnsServers(v []*string) *ContainerDefinition

SetDnsServers sets the DnsServers field's value.

func (*ContainerDefinition) SetDockerLabels ¶

func (s *ContainerDefinition) SetDockerLabels(v map[string]*string) *ContainerDefinition

SetDockerLabels sets the DockerLabels field's value.

func (*ContainerDefinition) SetDockerSecurityOptions ¶

func (s *ContainerDefinition) SetDockerSecurityOptions(v []*string) *ContainerDefinition

SetDockerSecurityOptions sets the DockerSecurityOptions field's value.

func (*ContainerDefinition) SetEntryPoint ¶

func (s *ContainerDefinition) SetEntryPoint(v []*string) *ContainerDefinition

SetEntryPoint sets the EntryPoint field's value.

func (*ContainerDefinition) SetEnvironment ¶

func (s *ContainerDefinition) SetEnvironment(v []*KeyValuePair) *ContainerDefinition

SetEnvironment sets the Environment field's value.

func (*ContainerDefinition) SetEssential ¶

func (s *ContainerDefinition) SetEssential(v bool) *ContainerDefinition

SetEssential sets the Essential field's value.

func (*ContainerDefinition) SetExtraHosts ¶

func (s *ContainerDefinition) SetExtraHosts(v []*HostEntry) *ContainerDefinition

SetExtraHosts sets the ExtraHosts field's value.

func (*ContainerDefinition) SetHostname ¶

func (s *ContainerDefinition) SetHostname(v string) *ContainerDefinition

SetHostname sets the Hostname field's value.

func (*ContainerDefinition) SetImage ¶

func (s *ContainerDefinition) SetImage(v string) *ContainerDefinition

SetImage sets the Image field's value.

func (*ContainerDefinition) SetLinks ¶

func (s *ContainerDefinition) SetLinks(v []*string) *ContainerDefinition

SetLinks sets the Links field's value.

func (*ContainerDefinition) SetLogConfiguration ¶

func (s *ContainerDefinition) SetLogConfiguration(v *LogConfiguration) *ContainerDefinition

SetLogConfiguration sets the LogConfiguration field's value.

func (*ContainerDefinition) SetMemory ¶

func (s *ContainerDefinition) SetMemory(v int64) *ContainerDefinition

SetMemory sets the Memory field's value.

func (*ContainerDefinition) SetMemoryReservation ¶

func (s *ContainerDefinition) SetMemoryReservation(v int64) *ContainerDefinition

SetMemoryReservation sets the MemoryReservation field's value.

func (*ContainerDefinition) SetMountPoints ¶

func (s *ContainerDefinition) SetMountPoints(v []*MountPoint) *ContainerDefinition

SetMountPoints sets the MountPoints field's value.

func (*ContainerDefinition) SetName ¶

func (s *ContainerDefinition) SetName(v string) *ContainerDefinition

SetName sets the Name field's value.

func (*ContainerDefinition) SetPortMappings ¶

func (s *ContainerDefinition) SetPortMappings(v []*PortMapping) *ContainerDefinition

SetPortMappings sets the PortMappings field's value.

func (*ContainerDefinition) SetPrivileged ¶

func (s *ContainerDefinition) SetPrivileged(v bool) *ContainerDefinition

SetPrivileged sets the Privileged field's value.

func (*ContainerDefinition) SetReadonlyRootFilesystem ¶

func (s *ContainerDefinition) SetReadonlyRootFilesystem(v bool) *ContainerDefinition

SetReadonlyRootFilesystem sets the ReadonlyRootFilesystem field's value.

func (*ContainerDefinition) SetUlimits ¶

func (s *ContainerDefinition) SetUlimits(v []*Ulimit) *ContainerDefinition

SetUlimits sets the Ulimits field's value.

func (*ContainerDefinition) SetUser ¶

func (s *ContainerDefinition) SetUser(v string) *ContainerDefinition

SetUser sets the User field's value.

func (*ContainerDefinition) SetVolumesFrom ¶

func (s *ContainerDefinition) SetVolumesFrom(v []*VolumeFrom) *ContainerDefinition

SetVolumesFrom sets the VolumesFrom field's value.

func (*ContainerDefinition) SetWorkingDirectory ¶

func (s *ContainerDefinition) SetWorkingDirectory(v string) *ContainerDefinition

SetWorkingDirectory sets the WorkingDirectory field's value.

func (ContainerDefinition) String ¶

func (s ContainerDefinition) String() string

String returns the string representation

func (*ContainerDefinition) Validate ¶

func (s *ContainerDefinition) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ContainerInstance ¶

An EC2 instance that is running the Amazon ECS agent and has been registered with a cluster. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ContainerInstance

type ContainerInstance struct {

    // This parameter returns true if the agent is actually connected to Amazon
    // ECS. Registered instances with an agent that may be unhealthy or stopped
    // return false, and instances without a connected agent cannot accept placement
    // requests.
    AgentConnected *bool `locationName:"agentConnected" type:"boolean"`

    // The status of the most recent agent update. If an update has never been requested,
    // this value is NULL.
    AgentUpdateStatus *string `locationName:"agentUpdateStatus" type:"string" enum:"AgentUpdateStatus"`

    // The attributes set for the container instance, either by the Amazon ECS container
    // agent at instance registration or manually with the PutAttributes operation.
    Attributes []*Attribute `locationName:"attributes" type:"list"`

    // The Amazon Resource Name (ARN) of the container instance. The ARN contains
    // the arn:aws:ecs namespace, followed by the region of the container instance,
    // the AWS account ID of the container instance owner, the container-instance
    // namespace, and then the container instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
    ContainerInstanceArn *string `locationName:"containerInstanceArn" type:"string"`

    // The EC2 instance ID of the container instance.
    Ec2InstanceId *string `locationName:"ec2InstanceId" type:"string"`

    // The number of tasks on the container instance that are in the PENDING status.
    PendingTasksCount *int64 `locationName:"pendingTasksCount" type:"integer"`

    // The Unix timestamp for when the container instance was registered.
    RegisteredAt *time.Time `locationName:"registeredAt" type:"timestamp" timestampFormat:"unix"`

    // For most resource types, this parameter describes the registered resources
    // on the container instance that are in use by current tasks. For port resource
    // types, this parameter describes the ports that were reserved by the Amazon
    // ECS container agent when it registered the container instance with Amazon
    // ECS.
    RegisteredResources []*Resource `locationName:"registeredResources" type:"list"`

    // For most resource types, this parameter describes the remaining resources
    // of the container instance that are available for new tasks. For port resource
    // types, this parameter describes the ports that are reserved by the Amazon
    // ECS container agent and any containers that have reserved port mappings;
    // any port that is not specified here is available for new tasks.
    RemainingResources []*Resource `locationName:"remainingResources" type:"list"`

    // The number of tasks on the container instance that are in the RUNNING status.
    RunningTasksCount *int64 `locationName:"runningTasksCount" type:"integer"`

    // The status of the container instance. The valid values are ACTIVE, INACTIVE,
    // or DRAINING. ACTIVE indicates that the container instance can accept tasks.
    // DRAINING indicates that new tasks are not placed on the container instance
    // and any service tasks running on the container instance are removed if possible.
    // For more information, see Container Instance Draining (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/container-instance-draining.html)
    // in the Amazon EC2 Container Service Developer Guide.
    Status *string `locationName:"status" type:"string"`

    // The version counter for the container instance. Every time a container instance
    // experiences a change that triggers a CloudWatch event, the version counter
    // is incremented. If you are replicating your Amazon ECS container instance
    // state with CloudWatch events, you can compare the version of a container
    // instance reported by the Amazon ECS APIs with the version reported in CloudWatch
    // events for the container instance (inside the detail object) to verify that
    // the version in your event stream is current.
    Version *int64 `locationName:"version" type:"long"`

    // The version information for the Amazon ECS container agent and Docker daemon
    // running on the container instance.
    VersionInfo *VersionInfo `locationName:"versionInfo" type:"structure"`
    // contains filtered or unexported fields
}

func (ContainerInstance) GoString ¶

func (s ContainerInstance) GoString() string

GoString returns the string representation

func (*ContainerInstance) SetAgentConnected ¶

func (s *ContainerInstance) SetAgentConnected(v bool) *ContainerInstance

SetAgentConnected sets the AgentConnected field's value.

func (*ContainerInstance) SetAgentUpdateStatus ¶

func (s *ContainerInstance) SetAgentUpdateStatus(v string) *ContainerInstance

SetAgentUpdateStatus sets the AgentUpdateStatus field's value.

func (*ContainerInstance) SetAttributes ¶

func (s *ContainerInstance) SetAttributes(v []*Attribute) *ContainerInstance

SetAttributes sets the Attributes field's value.

func (*ContainerInstance) SetContainerInstanceArn ¶

func (s *ContainerInstance) SetContainerInstanceArn(v string) *ContainerInstance

SetContainerInstanceArn sets the ContainerInstanceArn field's value.

func (*ContainerInstance) SetEc2InstanceId ¶

func (s *ContainerInstance) SetEc2InstanceId(v string) *ContainerInstance

SetEc2InstanceId sets the Ec2InstanceId field's value.

func (*ContainerInstance) SetPendingTasksCount ¶

func (s *ContainerInstance) SetPendingTasksCount(v int64) *ContainerInstance

SetPendingTasksCount sets the PendingTasksCount field's value.

func (*ContainerInstance) SetRegisteredAt ¶

func (s *ContainerInstance) SetRegisteredAt(v time.Time) *ContainerInstance

SetRegisteredAt sets the RegisteredAt field's value.

func (*ContainerInstance) SetRegisteredResources ¶

func (s *ContainerInstance) SetRegisteredResources(v []*Resource) *ContainerInstance

SetRegisteredResources sets the RegisteredResources field's value.

func (*ContainerInstance) SetRemainingResources ¶

func (s *ContainerInstance) SetRemainingResources(v []*Resource) *ContainerInstance

SetRemainingResources sets the RemainingResources field's value.

func (*ContainerInstance) SetRunningTasksCount ¶

func (s *ContainerInstance) SetRunningTasksCount(v int64) *ContainerInstance

SetRunningTasksCount sets the RunningTasksCount field's value.

func (*ContainerInstance) SetStatus ¶

func (s *ContainerInstance) SetStatus(v string) *ContainerInstance

SetStatus sets the Status field's value.

func (*ContainerInstance) SetVersion ¶

func (s *ContainerInstance) SetVersion(v int64) *ContainerInstance

SetVersion sets the Version field's value.

func (*ContainerInstance) SetVersionInfo ¶

func (s *ContainerInstance) SetVersionInfo(v *VersionInfo) *ContainerInstance

SetVersionInfo sets the VersionInfo field's value.

func (ContainerInstance) String ¶

func (s ContainerInstance) String() string

String returns the string representation

type ContainerOverride ¶

The overrides that should be sent to a container. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ContainerOverride

type ContainerOverride struct {

    // The command to send to the container that overrides the default command from
    // the Docker image or the task definition. You must also specify a container
    // name.
    Command []*string `locationName:"command" type:"list"`

    // The number of cpu units reserved for the container, instead of the default
    // value from the task definition. You must also specify a container name.
    Cpu *int64 `locationName:"cpu" type:"integer"`

    // The environment variables to send to the container. You can add new environment
    // variables, which are added to the container at launch, or you can override
    // the existing environment variables from the Docker image or the task definition.
    // You must also specify a container name.
    Environment []*KeyValuePair `locationName:"environment" type:"list"`

    // The hard limit (in MiB) of memory to present to the container, instead of
    // the default value from the task definition. If your container attempts to
    // exceed the memory specified here, the container is killed. You must also
    // specify a container name.
    Memory *int64 `locationName:"memory" type:"integer"`

    // The soft limit (in MiB) of memory to reserve for the container, instead of
    // the default value from the task definition. You must also specify a container
    // name.
    MemoryReservation *int64 `locationName:"memoryReservation" type:"integer"`

    // The name of the container that receives the override. This parameter is required
    // if any override is specified.
    Name *string `locationName:"name" type:"string"`
    // contains filtered or unexported fields
}

func (ContainerOverride) GoString ¶

func (s ContainerOverride) GoString() string

GoString returns the string representation

func (*ContainerOverride) SetCommand ¶

func (s *ContainerOverride) SetCommand(v []*string) *ContainerOverride

SetCommand sets the Command field's value.

func (*ContainerOverride) SetCpu ¶

func (s *ContainerOverride) SetCpu(v int64) *ContainerOverride

SetCpu sets the Cpu field's value.

func (*ContainerOverride) SetEnvironment ¶

func (s *ContainerOverride) SetEnvironment(v []*KeyValuePair) *ContainerOverride

SetEnvironment sets the Environment field's value.

func (*ContainerOverride) SetMemory ¶

func (s *ContainerOverride) SetMemory(v int64) *ContainerOverride

SetMemory sets the Memory field's value.

func (*ContainerOverride) SetMemoryReservation ¶

func (s *ContainerOverride) SetMemoryReservation(v int64) *ContainerOverride

SetMemoryReservation sets the MemoryReservation field's value.

func (*ContainerOverride) SetName ¶

func (s *ContainerOverride) SetName(v string) *ContainerOverride

SetName sets the Name field's value.

func (ContainerOverride) String ¶

func (s ContainerOverride) String() string

String returns the string representation

type CreateClusterInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateClusterRequest

type CreateClusterInput struct {

    // The name of your cluster. If you do not specify a name for your cluster,
    // you create a cluster named default. Up to 255 letters (uppercase and lowercase),
    // numbers, hyphens, and underscores are allowed.
    ClusterName *string `locationName:"clusterName" type:"string"`
    // contains filtered or unexported fields
}

func (CreateClusterInput) GoString ¶

func (s CreateClusterInput) GoString() string

GoString returns the string representation

func (*CreateClusterInput) SetClusterName ¶

func (s *CreateClusterInput) SetClusterName(v string) *CreateClusterInput

SetClusterName sets the ClusterName field's value.

func (CreateClusterInput) String ¶

func (s CreateClusterInput) String() string

String returns the string representation

type CreateClusterOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateClusterResponse

type CreateClusterOutput struct {

    // The full description of your new cluster.
    Cluster *Cluster `locationName:"cluster" type:"structure"`
    // contains filtered or unexported fields
}

func (CreateClusterOutput) GoString ¶

func (s CreateClusterOutput) GoString() string

GoString returns the string representation

func (*CreateClusterOutput) SetCluster ¶

func (s *CreateClusterOutput) SetCluster(v *Cluster) *CreateClusterOutput

SetCluster sets the Cluster field's value.

func (CreateClusterOutput) String ¶

func (s CreateClusterOutput) String() string

String returns the string representation

type CreateServiceInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateServiceRequest

type CreateServiceInput struct {

    // Unique, case-sensitive identifier you provide to ensure the idempotency of
    // the request. Up to 32 ASCII characters are allowed.
    ClientToken *string `locationName:"clientToken" type:"string"`

    // The short name or full Amazon Resource Name (ARN) of the cluster on which
    // to run your service. If you do not specify a cluster, the default cluster
    // is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // Optional deployment parameters that control how many tasks run during the
    // deployment and the ordering of stopping and starting tasks.
    DeploymentConfiguration *DeploymentConfiguration `locationName:"deploymentConfiguration" type:"structure"`

    // The number of instantiations of the specified task definition to place and
    // keep running on your cluster.
    //
    // DesiredCount is a required field
    DesiredCount *int64 `locationName:"desiredCount" type:"integer" required:"true"`

    // A load balancer object representing the load balancer to use with your service.
    // Currently, you are limited to one load balancer or target group per service.
    // After you create a service, the load balancer name or target group ARN, container
    // name, and container port specified in the service definition are immutable.
    //
    // For Elastic Load Balancing Classic load balancers, this object must contain
    // the load balancer name, the container name (as it appears in a container
    // definition), and the container port to access from the load balancer. When
    // a task from this service is placed on a container instance, the container
    // instance is registered with the load balancer specified here.
    //
    // For Elastic Load Balancing Application load balancers, this object must contain
    // the load balancer target group ARN, the container name (as it appears in
    // a container definition), and the container port to access from the load balancer.
    // When a task from this service is placed on a container instance, the container
    // instance and port combination is registered as a target in the target group
    // specified here.
    LoadBalancers []*LoadBalancer `locationName:"loadBalancers" type:"list"`

    // An array of placement constraint objects to use for tasks in your service.
    // You can specify a maximum of 10 constraints per task (this limit includes
    // constraints in the task definition and those specified at run time).
    PlacementConstraints []*PlacementConstraint `locationName:"placementConstraints" type:"list"`

    // The placement strategy objects to use for tasks in your service. You can
    // specify a maximum of 5 strategy rules per service.
    PlacementStrategy []*PlacementStrategy `locationName:"placementStrategy" type:"list"`

    // The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon
    // ECS to make calls to your load balancer on your behalf. This parameter is
    // required if you are using a load balancer with your service. If you specify
    // the role parameter, you must also specify a load balancer object with the
    // loadBalancers parameter.
    //
    // If your specified role has a path other than /, then you must either specify
    // the full role ARN (this is recommended) or prefix the role name with the
    // path. For example, if a role with the name bar has a path of /foo/ then you
    // would specify /foo/bar as the role name. For more information, see Friendly
    // Names and Paths (http://docs.aws.amazon.com/IAM/latest/UserGuide/reference_identifiers.html#identifiers-friendly-names)
    // in the IAM User Guide.
    Role *string `locationName:"role" type:"string"`

    // The name of your service. Up to 255 letters (uppercase and lowercase), numbers,
    // hyphens, and underscores are allowed. Service names must be unique within
    // a cluster, but you can have similarly named services in multiple clusters
    // within a region or across multiple regions.
    //
    // ServiceName is a required field
    ServiceName *string `locationName:"serviceName" type:"string" required:"true"`

    // The family and revision (family:revision) or full Amazon Resource Name (ARN)
    // of the task definition to run in your service. If a revision is not specified,
    // the latest ACTIVE revision is used.
    //
    // TaskDefinition is a required field
    TaskDefinition *string `locationName:"taskDefinition" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CreateServiceInput) GoString ¶

func (s CreateServiceInput) GoString() string

GoString returns the string representation

func (*CreateServiceInput) SetClientToken ¶

func (s *CreateServiceInput) SetClientToken(v string) *CreateServiceInput

SetClientToken sets the ClientToken field's value.

func (*CreateServiceInput) SetCluster ¶

func (s *CreateServiceInput) SetCluster(v string) *CreateServiceInput

SetCluster sets the Cluster field's value.

func (*CreateServiceInput) SetDeploymentConfiguration ¶

func (s *CreateServiceInput) SetDeploymentConfiguration(v *DeploymentConfiguration) *CreateServiceInput

SetDeploymentConfiguration sets the DeploymentConfiguration field's value.

func (*CreateServiceInput) SetDesiredCount ¶

func (s *CreateServiceInput) SetDesiredCount(v int64) *CreateServiceInput

SetDesiredCount sets the DesiredCount field's value.

func (*CreateServiceInput) SetLoadBalancers ¶

func (s *CreateServiceInput) SetLoadBalancers(v []*LoadBalancer) *CreateServiceInput

SetLoadBalancers sets the LoadBalancers field's value.

func (*CreateServiceInput) SetPlacementConstraints ¶

func (s *CreateServiceInput) SetPlacementConstraints(v []*PlacementConstraint) *CreateServiceInput

SetPlacementConstraints sets the PlacementConstraints field's value.

func (*CreateServiceInput) SetPlacementStrategy ¶

func (s *CreateServiceInput) SetPlacementStrategy(v []*PlacementStrategy) *CreateServiceInput

SetPlacementStrategy sets the PlacementStrategy field's value.

func (*CreateServiceInput) SetRole ¶

func (s *CreateServiceInput) SetRole(v string) *CreateServiceInput

SetRole sets the Role field's value.

func (*CreateServiceInput) SetServiceName ¶

func (s *CreateServiceInput) SetServiceName(v string) *CreateServiceInput

SetServiceName sets the ServiceName field's value.

func (*CreateServiceInput) SetTaskDefinition ¶

func (s *CreateServiceInput) SetTaskDefinition(v string) *CreateServiceInput

SetTaskDefinition sets the TaskDefinition field's value.

func (CreateServiceInput) String ¶

func (s CreateServiceInput) String() string

String returns the string representation

func (*CreateServiceInput) Validate ¶

func (s *CreateServiceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateServiceOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateServiceResponse

type CreateServiceOutput struct {

    // The full description of your service following the create call.
    Service *Service `locationName:"service" type:"structure"`
    // contains filtered or unexported fields
}

func (CreateServiceOutput) GoString ¶

func (s CreateServiceOutput) GoString() string

GoString returns the string representation

func (*CreateServiceOutput) SetService ¶

func (s *CreateServiceOutput) SetService(v *Service) *CreateServiceOutput

SetService sets the Service field's value.

func (CreateServiceOutput) String ¶

func (s CreateServiceOutput) String() string

String returns the string representation

type DeleteAttributesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteAttributesRequest

type DeleteAttributesInput struct {

    // The attributes to delete from your resource. You can specify up to 10 attributes
    // per request. For custom attributes, specify the attribute name and target
    // ID, but do not specify the value. If you specify the target ID using the
    // short form, you must also specify the target type.
    //
    // Attributes is a required field
    Attributes []*Attribute `locationName:"attributes" type:"list" required:"true"`

    // The short name or full Amazon Resource Name (ARN) of the cluster that contains
    // the resource to delete attributes. If you do not specify a cluster, the default
    // cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`
    // contains filtered or unexported fields
}

func (DeleteAttributesInput) GoString ¶

func (s DeleteAttributesInput) GoString() string

GoString returns the string representation

func (*DeleteAttributesInput) SetAttributes ¶

func (s *DeleteAttributesInput) SetAttributes(v []*Attribute) *DeleteAttributesInput

SetAttributes sets the Attributes field's value.

func (*DeleteAttributesInput) SetCluster ¶

func (s *DeleteAttributesInput) SetCluster(v string) *DeleteAttributesInput

SetCluster sets the Cluster field's value.

func (DeleteAttributesInput) String ¶

func (s DeleteAttributesInput) String() string

String returns the string representation

func (*DeleteAttributesInput) Validate ¶

func (s *DeleteAttributesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteAttributesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteAttributesResponse

type DeleteAttributesOutput struct {

    // A list of attribute objects that were successfully deleted from your resource.
    Attributes []*Attribute `locationName:"attributes" type:"list"`
    // contains filtered or unexported fields
}

func (DeleteAttributesOutput) GoString ¶

func (s DeleteAttributesOutput) GoString() string

GoString returns the string representation

func (*DeleteAttributesOutput) SetAttributes ¶

func (s *DeleteAttributesOutput) SetAttributes(v []*Attribute) *DeleteAttributesOutput

SetAttributes sets the Attributes field's value.

func (DeleteAttributesOutput) String ¶

func (s DeleteAttributesOutput) String() string

String returns the string representation

type DeleteClusterInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteClusterRequest

type DeleteClusterInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster to delete.
    //
    // Cluster is a required field
    Cluster *string `locationName:"cluster" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteClusterInput) GoString ¶

func (s DeleteClusterInput) GoString() string

GoString returns the string representation

func (*DeleteClusterInput) SetCluster ¶

func (s *DeleteClusterInput) SetCluster(v string) *DeleteClusterInput

SetCluster sets the Cluster field's value.

func (DeleteClusterInput) String ¶

func (s DeleteClusterInput) String() string

String returns the string representation

func (*DeleteClusterInput) Validate ¶

func (s *DeleteClusterInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteClusterOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteClusterResponse

type DeleteClusterOutput struct {

    // The full description of the deleted cluster.
    Cluster *Cluster `locationName:"cluster" type:"structure"`
    // contains filtered or unexported fields
}

func (DeleteClusterOutput) GoString ¶

func (s DeleteClusterOutput) GoString() string

GoString returns the string representation

func (*DeleteClusterOutput) SetCluster ¶

func (s *DeleteClusterOutput) SetCluster(v *Cluster) *DeleteClusterOutput

SetCluster sets the Cluster field's value.

func (DeleteClusterOutput) String ¶

func (s DeleteClusterOutput) String() string

String returns the string representation

type DeleteServiceInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteServiceRequest

type DeleteServiceInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the service to delete. If you do not specify a cluster, the default cluster
    // is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The name of the service to delete.
    //
    // Service is a required field
    Service *string `locationName:"service" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteServiceInput) GoString ¶

func (s DeleteServiceInput) GoString() string

GoString returns the string representation

func (*DeleteServiceInput) SetCluster ¶

func (s *DeleteServiceInput) SetCluster(v string) *DeleteServiceInput

SetCluster sets the Cluster field's value.

func (*DeleteServiceInput) SetService ¶

func (s *DeleteServiceInput) SetService(v string) *DeleteServiceInput

SetService sets the Service field's value.

func (DeleteServiceInput) String ¶

func (s DeleteServiceInput) String() string

String returns the string representation

func (*DeleteServiceInput) Validate ¶

func (s *DeleteServiceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteServiceOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteServiceResponse

type DeleteServiceOutput struct {

    // The full description of the deleted service.
    Service *Service `locationName:"service" type:"structure"`
    // contains filtered or unexported fields
}

func (DeleteServiceOutput) GoString ¶

func (s DeleteServiceOutput) GoString() string

GoString returns the string representation

func (*DeleteServiceOutput) SetService ¶

func (s *DeleteServiceOutput) SetService(v *Service) *DeleteServiceOutput

SetService sets the Service field's value.

func (DeleteServiceOutput) String ¶

func (s DeleteServiceOutput) String() string

String returns the string representation

type Deployment ¶

The details of an Amazon ECS service deployment. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Deployment

type Deployment struct {

    // The Unix timestamp for when the service was created.
    CreatedAt *time.Time `locationName:"createdAt" type:"timestamp" timestampFormat:"unix"`

    // The most recent desired count of tasks that was specified for the service
    // to deploy or maintain.
    DesiredCount *int64 `locationName:"desiredCount" type:"integer"`

    // The ID of the deployment.
    Id *string `locationName:"id" type:"string"`

    // The number of tasks in the deployment that are in the PENDING status.
    PendingCount *int64 `locationName:"pendingCount" type:"integer"`

    // The number of tasks in the deployment that are in the RUNNING status.
    RunningCount *int64 `locationName:"runningCount" type:"integer"`

    // The status of the deployment. Valid values are PRIMARY (for the most recent
    // deployment), ACTIVE (for previous deployments that still have tasks running,
    // but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments
    // that have been completely replaced).
    Status *string `locationName:"status" type:"string"`

    // The most recent task definition that was specified for the service to use.
    TaskDefinition *string `locationName:"taskDefinition" type:"string"`

    // The Unix timestamp for when the service was last updated.
    UpdatedAt *time.Time `locationName:"updatedAt" type:"timestamp" timestampFormat:"unix"`
    // contains filtered or unexported fields
}

func (Deployment) GoString ¶

func (s Deployment) GoString() string

GoString returns the string representation

func (*Deployment) SetCreatedAt ¶

func (s *Deployment) SetCreatedAt(v time.Time) *Deployment

SetCreatedAt sets the CreatedAt field's value.

func (*Deployment) SetDesiredCount ¶

func (s *Deployment) SetDesiredCount(v int64) *Deployment

SetDesiredCount sets the DesiredCount field's value.

func (*Deployment) SetId ¶

func (s *Deployment) SetId(v string) *Deployment

SetId sets the Id field's value.

func (*Deployment) SetPendingCount ¶

func (s *Deployment) SetPendingCount(v int64) *Deployment

SetPendingCount sets the PendingCount field's value.

func (*Deployment) SetRunningCount ¶

func (s *Deployment) SetRunningCount(v int64) *Deployment

SetRunningCount sets the RunningCount field's value.

func (*Deployment) SetStatus ¶

func (s *Deployment) SetStatus(v string) *Deployment

SetStatus sets the Status field's value.

func (*Deployment) SetTaskDefinition ¶

func (s *Deployment) SetTaskDefinition(v string) *Deployment

SetTaskDefinition sets the TaskDefinition field's value.

func (*Deployment) SetUpdatedAt ¶

func (s *Deployment) SetUpdatedAt(v time.Time) *Deployment

SetUpdatedAt sets the UpdatedAt field's value.

func (Deployment) String ¶

func (s Deployment) String() string

String returns the string representation

type DeploymentConfiguration ¶

Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeploymentConfiguration

type DeploymentConfiguration struct {

    // The upper limit (as a percentage of the service's desiredCount) of the number
    // of tasks that are allowed in the RUNNING or PENDING state in a service during
    // a deployment. The maximum number of tasks during a deployment is the desiredCount
    // multiplied by maximumPercent/100, rounded down to the nearest integer value.
    MaximumPercent *int64 `locationName:"maximumPercent" type:"integer"`

    // The lower limit (as a percentage of the service's desiredCount) of the number
    // of running tasks that must remain in the RUNNING state in a service during
    // a deployment. The minimum healthy tasks during a deployment is the desiredCount
    // multiplied by minimumHealthyPercent/100, rounded up to the nearest integer
    // value.
    MinimumHealthyPercent *int64 `locationName:"minimumHealthyPercent" type:"integer"`
    // contains filtered or unexported fields
}

func (DeploymentConfiguration) GoString ¶

func (s DeploymentConfiguration) GoString() string

GoString returns the string representation

func (*DeploymentConfiguration) SetMaximumPercent ¶

func (s *DeploymentConfiguration) SetMaximumPercent(v int64) *DeploymentConfiguration

SetMaximumPercent sets the MaximumPercent field's value.

func (*DeploymentConfiguration) SetMinimumHealthyPercent ¶

func (s *DeploymentConfiguration) SetMinimumHealthyPercent(v int64) *DeploymentConfiguration

SetMinimumHealthyPercent sets the MinimumHealthyPercent field's value.

func (DeploymentConfiguration) String ¶

func (s DeploymentConfiguration) String() string

String returns the string representation

type DeregisterContainerInstanceInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterContainerInstanceRequest

type DeregisterContainerInstanceInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the container instance to deregister. If you do not specify a cluster, the
    // default cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The container instance ID or full Amazon Resource Name (ARN) of the container
    // instance to deregister. The ARN contains the arn:aws:ecs namespace, followed
    // by the region of the container instance, the AWS account ID of the container
    // instance owner, the container-instance namespace, and then the container
    // instance ID. For example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
    //
    // ContainerInstance is a required field
    ContainerInstance *string `locationName:"containerInstance" type:"string" required:"true"`

    // Forces the deregistration of the container instance. If you have tasks running
    // on the container instance when you deregister it with the force option, these
    // tasks remain running until you terminate the instance or the tasks stop through
    // some other means, but they are orphaned (no longer monitored or accounted
    // for by Amazon ECS). If an orphaned task on your container instance is part
    // of an Amazon ECS service, then the service scheduler starts another copy
    // of that task, on a different container instance if possible.
    //
    // Any containers in orphaned service tasks that are registered with a Classic
    // load balancer or an Application load balancer target group are deregistered,
    // and they will begin connection draining according to the settings on the
    // load balancer or target group.
    Force *bool `locationName:"force" type:"boolean"`
    // contains filtered or unexported fields
}

func (DeregisterContainerInstanceInput) GoString ¶

func (s DeregisterContainerInstanceInput) GoString() string

GoString returns the string representation

func (*DeregisterContainerInstanceInput) SetCluster ¶

func (s *DeregisterContainerInstanceInput) SetCluster(v string) *DeregisterContainerInstanceInput

SetCluster sets the Cluster field's value.

func (*DeregisterContainerInstanceInput) SetContainerInstance ¶

func (s *DeregisterContainerInstanceInput) SetContainerInstance(v string) *DeregisterContainerInstanceInput

SetContainerInstance sets the ContainerInstance field's value.

func (*DeregisterContainerInstanceInput) SetForce ¶

func (s *DeregisterContainerInstanceInput) SetForce(v bool) *DeregisterContainerInstanceInput

SetForce sets the Force field's value.

func (DeregisterContainerInstanceInput) String ¶

func (s DeregisterContainerInstanceInput) String() string

String returns the string representation

func (*DeregisterContainerInstanceInput) Validate ¶

func (s *DeregisterContainerInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeregisterContainerInstanceOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterContainerInstanceResponse

type DeregisterContainerInstanceOutput struct {

    // The container instance that was deregistered.
    ContainerInstance *ContainerInstance `locationName:"containerInstance" type:"structure"`
    // contains filtered or unexported fields
}

func (DeregisterContainerInstanceOutput) GoString ¶

func (s DeregisterContainerInstanceOutput) GoString() string

GoString returns the string representation

func (*DeregisterContainerInstanceOutput) SetContainerInstance ¶

func (s *DeregisterContainerInstanceOutput) SetContainerInstance(v *ContainerInstance) *DeregisterContainerInstanceOutput

SetContainerInstance sets the ContainerInstance field's value.

func (DeregisterContainerInstanceOutput) String ¶

func (s DeregisterContainerInstanceOutput) String() string

String returns the string representation

type DeregisterTaskDefinitionInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterTaskDefinitionRequest

type DeregisterTaskDefinitionInput struct {

    // The family and revision (family:revision) or full Amazon Resource Name (ARN)
    // of the task definition to deregister. You must specify a revision.
    //
    // TaskDefinition is a required field
    TaskDefinition *string `locationName:"taskDefinition" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeregisterTaskDefinitionInput) GoString ¶

func (s DeregisterTaskDefinitionInput) GoString() string

GoString returns the string representation

func (*DeregisterTaskDefinitionInput) SetTaskDefinition ¶

func (s *DeregisterTaskDefinitionInput) SetTaskDefinition(v string) *DeregisterTaskDefinitionInput

SetTaskDefinition sets the TaskDefinition field's value.

func (DeregisterTaskDefinitionInput) String ¶

func (s DeregisterTaskDefinitionInput) String() string

String returns the string representation

func (*DeregisterTaskDefinitionInput) Validate ¶

func (s *DeregisterTaskDefinitionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeregisterTaskDefinitionOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterTaskDefinitionResponse

type DeregisterTaskDefinitionOutput struct {

    // The full description of the deregistered task.
    TaskDefinition *TaskDefinition `locationName:"taskDefinition" type:"structure"`
    // contains filtered or unexported fields
}

func (DeregisterTaskDefinitionOutput) GoString ¶

func (s DeregisterTaskDefinitionOutput) GoString() string

GoString returns the string representation

func (*DeregisterTaskDefinitionOutput) SetTaskDefinition ¶

func (s *DeregisterTaskDefinitionOutput) SetTaskDefinition(v *TaskDefinition) *DeregisterTaskDefinitionOutput

SetTaskDefinition sets the TaskDefinition field's value.

func (DeregisterTaskDefinitionOutput) String ¶

func (s DeregisterTaskDefinitionOutput) String() string

String returns the string representation

type DescribeClustersInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeClustersRequest

type DescribeClustersInput struct {

    // A list of up to 100 cluster names or full cluster Amazon Resource Name (ARN)
    // entries. If you do not specify a cluster, the default cluster is assumed.
    Clusters []*string `locationName:"clusters" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeClustersInput) GoString ¶

func (s DescribeClustersInput) GoString() string

GoString returns the string representation

func (*DescribeClustersInput) SetClusters ¶

func (s *DescribeClustersInput) SetClusters(v []*string) *DescribeClustersInput

SetClusters sets the Clusters field's value.

func (DescribeClustersInput) String ¶

func (s DescribeClustersInput) String() string

String returns the string representation

type DescribeClustersOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeClustersResponse

type DescribeClustersOutput struct {

    // The list of clusters.
    Clusters []*Cluster `locationName:"clusters" type:"list"`

    // Any failures associated with the call.
    Failures []*Failure `locationName:"failures" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeClustersOutput) GoString ¶

func (s DescribeClustersOutput) GoString() string

GoString returns the string representation

func (*DescribeClustersOutput) SetClusters ¶

func (s *DescribeClustersOutput) SetClusters(v []*Cluster) *DescribeClustersOutput

SetClusters sets the Clusters field's value.

func (*DescribeClustersOutput) SetFailures ¶

func (s *DescribeClustersOutput) SetFailures(v []*Failure) *DescribeClustersOutput

SetFailures sets the Failures field's value.

func (DescribeClustersOutput) String ¶

func (s DescribeClustersOutput) String() string

String returns the string representation

type DescribeContainerInstancesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeContainerInstancesRequest

type DescribeContainerInstancesInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the container instances to describe. If you do not specify a cluster, the
    // default cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // A list of container instance IDs or full Amazon Resource Name (ARN) entries.
    //
    // ContainerInstances is a required field
    ContainerInstances []*string `locationName:"containerInstances" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeContainerInstancesInput) GoString ¶

func (s DescribeContainerInstancesInput) GoString() string

GoString returns the string representation

func (*DescribeContainerInstancesInput) SetCluster ¶

func (s *DescribeContainerInstancesInput) SetCluster(v string) *DescribeContainerInstancesInput

SetCluster sets the Cluster field's value.

func (*DescribeContainerInstancesInput) SetContainerInstances ¶

func (s *DescribeContainerInstancesInput) SetContainerInstances(v []*string) *DescribeContainerInstancesInput

SetContainerInstances sets the ContainerInstances field's value.

func (DescribeContainerInstancesInput) String ¶

func (s DescribeContainerInstancesInput) String() string

String returns the string representation

func (*DescribeContainerInstancesInput) Validate ¶

func (s *DescribeContainerInstancesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeContainerInstancesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeContainerInstancesResponse

type DescribeContainerInstancesOutput struct {

    // The list of container instances.
    ContainerInstances []*ContainerInstance `locationName:"containerInstances" type:"list"`

    // Any failures associated with the call.
    Failures []*Failure `locationName:"failures" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeContainerInstancesOutput) GoString ¶

func (s DescribeContainerInstancesOutput) GoString() string

GoString returns the string representation

func (*DescribeContainerInstancesOutput) SetContainerInstances ¶

func (s *DescribeContainerInstancesOutput) SetContainerInstances(v []*ContainerInstance) *DescribeContainerInstancesOutput

SetContainerInstances sets the ContainerInstances field's value.

func (*DescribeContainerInstancesOutput) SetFailures ¶

func (s *DescribeContainerInstancesOutput) SetFailures(v []*Failure) *DescribeContainerInstancesOutput

SetFailures sets the Failures field's value.

func (DescribeContainerInstancesOutput) String ¶

func (s DescribeContainerInstancesOutput) String() string

String returns the string representation

type DescribeServicesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeServicesRequest

type DescribeServicesInput struct {

    // The short name or full Amazon Resource Name (ARN)the cluster that hosts the
    // service to describe. If you do not specify a cluster, the default cluster
    // is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // A list of services to describe. You may specify up to 10 services to describe
    // in a single operation.
    //
    // Services is a required field
    Services []*string `locationName:"services" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeServicesInput) GoString ¶

func (s DescribeServicesInput) GoString() string

GoString returns the string representation

func (*DescribeServicesInput) SetCluster ¶

func (s *DescribeServicesInput) SetCluster(v string) *DescribeServicesInput

SetCluster sets the Cluster field's value.

func (*DescribeServicesInput) SetServices ¶

func (s *DescribeServicesInput) SetServices(v []*string) *DescribeServicesInput

SetServices sets the Services field's value.

func (DescribeServicesInput) String ¶

func (s DescribeServicesInput) String() string

String returns the string representation

func (*DescribeServicesInput) Validate ¶

func (s *DescribeServicesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeServicesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeServicesResponse

type DescribeServicesOutput struct {

    // Any failures associated with the call.
    Failures []*Failure `locationName:"failures" type:"list"`

    // The list of services described.
    Services []*Service `locationName:"services" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeServicesOutput) GoString ¶

func (s DescribeServicesOutput) GoString() string

GoString returns the string representation

func (*DescribeServicesOutput) SetFailures ¶

func (s *DescribeServicesOutput) SetFailures(v []*Failure) *DescribeServicesOutput

SetFailures sets the Failures field's value.

func (*DescribeServicesOutput) SetServices ¶

func (s *DescribeServicesOutput) SetServices(v []*Service) *DescribeServicesOutput

SetServices sets the Services field's value.

func (DescribeServicesOutput) String ¶

func (s DescribeServicesOutput) String() string

String returns the string representation

type DescribeTaskDefinitionInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTaskDefinitionRequest

type DescribeTaskDefinitionInput struct {

    // The family for the latest ACTIVE revision, family and revision (family:revision)
    // for a specific revision in the family, or full Amazon Resource Name (ARN)
    // of the task definition to describe.
    //
    // TaskDefinition is a required field
    TaskDefinition *string `locationName:"taskDefinition" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTaskDefinitionInput) GoString ¶

func (s DescribeTaskDefinitionInput) GoString() string

GoString returns the string representation

func (*DescribeTaskDefinitionInput) SetTaskDefinition ¶

func (s *DescribeTaskDefinitionInput) SetTaskDefinition(v string) *DescribeTaskDefinitionInput

SetTaskDefinition sets the TaskDefinition field's value.

func (DescribeTaskDefinitionInput) String ¶

func (s DescribeTaskDefinitionInput) String() string

String returns the string representation

func (*DescribeTaskDefinitionInput) Validate ¶

func (s *DescribeTaskDefinitionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTaskDefinitionOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTaskDefinitionResponse

type DescribeTaskDefinitionOutput struct {

    // The full task definition description.
    TaskDefinition *TaskDefinition `locationName:"taskDefinition" type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeTaskDefinitionOutput) GoString ¶

func (s DescribeTaskDefinitionOutput) GoString() string

GoString returns the string representation

func (*DescribeTaskDefinitionOutput) SetTaskDefinition ¶

func (s *DescribeTaskDefinitionOutput) SetTaskDefinition(v *TaskDefinition) *DescribeTaskDefinitionOutput

SetTaskDefinition sets the TaskDefinition field's value.

func (DescribeTaskDefinitionOutput) String ¶

func (s DescribeTaskDefinitionOutput) String() string

String returns the string representation

type DescribeTasksInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTasksRequest

type DescribeTasksInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the task to describe. If you do not specify a cluster, the default cluster
    // is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // A list of up to 100 task IDs or full Amazon Resource Name (ARN) entries.
    //
    // Tasks is a required field
    Tasks []*string `locationName:"tasks" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeTasksInput) GoString ¶

func (s DescribeTasksInput) GoString() string

GoString returns the string representation

func (*DescribeTasksInput) SetCluster ¶

func (s *DescribeTasksInput) SetCluster(v string) *DescribeTasksInput

SetCluster sets the Cluster field's value.

func (*DescribeTasksInput) SetTasks ¶

func (s *DescribeTasksInput) SetTasks(v []*string) *DescribeTasksInput

SetTasks sets the Tasks field's value.

func (DescribeTasksInput) String ¶

func (s DescribeTasksInput) String() string

String returns the string representation

func (*DescribeTasksInput) Validate ¶

func (s *DescribeTasksInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTasksOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTasksResponse

type DescribeTasksOutput struct {

    // Any failures associated with the call.
    Failures []*Failure `locationName:"failures" type:"list"`

    // The list of tasks.
    Tasks []*Task `locationName:"tasks" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeTasksOutput) GoString ¶

func (s DescribeTasksOutput) GoString() string

GoString returns the string representation

func (*DescribeTasksOutput) SetFailures ¶

func (s *DescribeTasksOutput) SetFailures(v []*Failure) *DescribeTasksOutput

SetFailures sets the Failures field's value.

func (*DescribeTasksOutput) SetTasks ¶

func (s *DescribeTasksOutput) SetTasks(v []*Task) *DescribeTasksOutput

SetTasks sets the Tasks field's value.

func (DescribeTasksOutput) String ¶

func (s DescribeTasksOutput) String() string

String returns the string representation

type DiscoverPollEndpointInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DiscoverPollEndpointRequest

type DiscoverPollEndpointInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that the
    // container instance belongs to.
    Cluster *string `locationName:"cluster" type:"string"`

    // The container instance ID or full Amazon Resource Name (ARN) of the container
    // instance. The ARN contains the arn:aws:ecs namespace, followed by the region
    // of the container instance, the AWS account ID of the container instance owner,
    // the container-instance namespace, and then the container instance ID. For
    // example, arn:aws:ecs:region:aws_account_id:container-instance/container_instance_ID.
    ContainerInstance *string `locationName:"containerInstance" type:"string"`
    // contains filtered or unexported fields
}

func (DiscoverPollEndpointInput) GoString ¶

func (s DiscoverPollEndpointInput) GoString() string

GoString returns the string representation

func (*DiscoverPollEndpointInput) SetCluster ¶

func (s *DiscoverPollEndpointInput) SetCluster(v string) *DiscoverPollEndpointInput

SetCluster sets the Cluster field's value.

func (*DiscoverPollEndpointInput) SetContainerInstance ¶

func (s *DiscoverPollEndpointInput) SetContainerInstance(v string) *DiscoverPollEndpointInput

SetContainerInstance sets the ContainerInstance field's value.

func (DiscoverPollEndpointInput) String ¶

func (s DiscoverPollEndpointInput) String() string

String returns the string representation

type DiscoverPollEndpointOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DiscoverPollEndpointResponse

type DiscoverPollEndpointOutput struct {

    // The endpoint for the Amazon ECS agent to poll.
    Endpoint *string `locationName:"endpoint" type:"string"`

    // The telemetry endpoint for the Amazon ECS agent.
    TelemetryEndpoint *string `locationName:"telemetryEndpoint" type:"string"`
    // contains filtered or unexported fields
}

func (DiscoverPollEndpointOutput) GoString ¶

func (s DiscoverPollEndpointOutput) GoString() string

GoString returns the string representation

func (*DiscoverPollEndpointOutput) SetEndpoint ¶

func (s *DiscoverPollEndpointOutput) SetEndpoint(v string) *DiscoverPollEndpointOutput

SetEndpoint sets the Endpoint field's value.

func (*DiscoverPollEndpointOutput) SetTelemetryEndpoint ¶

func (s *DiscoverPollEndpointOutput) SetTelemetryEndpoint(v string) *DiscoverPollEndpointOutput

SetTelemetryEndpoint sets the TelemetryEndpoint field's value.

func (DiscoverPollEndpointOutput) String ¶

func (s DiscoverPollEndpointOutput) String() string

String returns the string representation

type ECS ¶

ECS provides the API operation methods for making requests to Amazon EC2 Container Service. See this package's package overview docs for details on the service.

ECS methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

type ECS struct {
    *client.Client
}

func New ¶

func New(p client.ConfigProvider, cfgs ...*aws.Config) *ECS

New creates a new instance of the ECS client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a ECS client from just a session.
svc := ecs.New(mySession)

// Create a ECS client with additional configuration
svc := ecs.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*ECS) CreateCluster ¶

func (c *ECS) CreateCluster(input *CreateClusterInput) (*CreateClusterOutput, error)

CreateCluster API operation for Amazon EC2 Container Service.

Creates a new Amazon ECS cluster. By default, your account receives a default cluster when you launch your first container instance. However, you can create your own cluster with a unique name with the CreateCluster action.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation CreateCluster for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateCluster

svc := ecs.New(session.New())
input := &ecs.CreateClusterInput{
    ClusterName: aws.String("my_cluster"),
}

result, err := svc.CreateCluster(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) CreateClusterRequest ¶

func (c *ECS) CreateClusterRequest(input *CreateClusterInput) (req *request.Request, output *CreateClusterOutput)

CreateClusterRequest generates a "aws/request.Request" representing the client's request for the CreateCluster operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateCluster for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateCluster method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateClusterRequest method.
req, resp := client.CreateClusterRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateCluster

func (*ECS) CreateClusterWithContext ¶

func (c *ECS) CreateClusterWithContext(ctx aws.Context, input *CreateClusterInput, opts ...request.Option) (*CreateClusterOutput, error)

CreateClusterWithContext is the same as CreateCluster with the addition of the ability to pass a context and additional request options.

See CreateCluster for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) CreateService ¶

func (c *ECS) CreateService(input *CreateServiceInput) (*CreateServiceOutput, error)

CreateService API operation for Amazon EC2 Container Service.

Runs and maintains a desired number of tasks from a specified task definition. If the number of tasks running in a service drops below desiredCount, Amazon ECS spawns another copy of the task in the specified cluster. To update an existing service, see UpdateService.

In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind a load balancer. The load balancer distributes traffic across the tasks that are associated with the service. For more information, see Service Load Balancing (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-load-balancing.html) in the Amazon EC2 Container Service Developer Guide.

You can optionally specify a deployment configuration for your service. During a deployment (which is triggered by changing the task definition or the desired count of a service with an UpdateService operation), the service scheduler uses the minimumHealthyPercent and maximumPercent parameters to determine the deployment strategy.

The minimumHealthyPercent represents a lower limit on the number of your service's tasks that must remain in the RUNNING state during a deployment, as a percentage of the desiredCount (rounded up to the nearest integer). This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desiredCount of four tasks and a minimumHealthyPercent of 50%, the scheduler can stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state. Tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and the container instance they are hosted on is reported as healthy by the load balancer. The default value for minimumHealthyPercent is 50% in the console and 100% for the AWS CLI, the AWS SDKs, and the APIs.

The maximumPercent parameter represents an upper limit on the number of your service's tasks that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desiredCount (rounded down to the nearest integer). This parameter enables you to define the deployment batch size. For example, if your service has a desiredCount of four tasks and a maximumPercent value of 200%, the scheduler can start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximumPercent is 200%.

When the service scheduler launches new tasks, it determines task placement in your cluster using the following logic:

* Determine which of the container instances in your cluster can support
your service's task definition (for example, they have the required CPU,
memory, ports, and container instance attributes).

* By default, the service scheduler attempts to balance tasks across Availability
Zones in this manner (although you can choose a different placement strategy)
with the placementStrategy parameter):

Sort the valid container instances by the fewest number of running tasks

for this service in the same Availability Zone as the instance. For example,
if zone A has one running service task and zones B and C each have zero,
valid container instances in either zone B or C are considered optimal
for placement.

Place the new service task on a valid container instance in an optimal Availability

Zone (based on the previous steps), favoring container instances with
the fewest number of running tasks for this service.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation CreateService for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateService

svc := ecs.New(session.New())
input := &ecs.CreateServiceInput{
    DesiredCount:   aws.Int64(10),
    ServiceName:    aws.String("ecs-simple-service"),
    TaskDefinition: aws.String("hello_world"),
}

result, err := svc.CreateService(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := ecs.New(session.New())
input := &ecs.CreateServiceInput{
    DesiredCount: aws.Int64(10),
    LoadBalancers: []*ecs.LoadBalancer{
        {
            ContainerName:    aws.String("simple-app"),
            ContainerPort:    aws.Int64(80),
            LoadBalancerName: aws.String("EC2Contai-EcsElast-15DCDAURT3ZO2"),
        },
    },
    Role:           aws.String("ecsServiceRole"),
    ServiceName:    aws.String("ecs-simple-service-elb"),
    TaskDefinition: aws.String("console-sample-app-static"),
}

result, err := svc.CreateService(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) CreateServiceRequest ¶

func (c *ECS) CreateServiceRequest(input *CreateServiceInput) (req *request.Request, output *CreateServiceOutput)

CreateServiceRequest generates a "aws/request.Request" representing the client's request for the CreateService operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateService for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateService method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateServiceRequest method.
req, resp := client.CreateServiceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/CreateService

func (*ECS) CreateServiceWithContext ¶

func (c *ECS) CreateServiceWithContext(ctx aws.Context, input *CreateServiceInput, opts ...request.Option) (*CreateServiceOutput, error)

CreateServiceWithContext is the same as CreateService with the addition of the ability to pass a context and additional request options.

See CreateService for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DeleteAttributes ¶

func (c *ECS) DeleteAttributes(input *DeleteAttributesInput) (*DeleteAttributesOutput, error)

DeleteAttributes API operation for Amazon EC2 Container Service.

Deletes one or more custom attributes from an Amazon ECS resource.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DeleteAttributes for usage and error information.

Returned Error Codes:

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeTargetNotFoundException "TargetNotFoundException"
The specified target could not be found. You can view your available container
instances with ListContainerInstances. Amazon ECS container instances are
cluster-specific and region-specific.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteAttributes

func (*ECS) DeleteAttributesRequest ¶

func (c *ECS) DeleteAttributesRequest(input *DeleteAttributesInput) (req *request.Request, output *DeleteAttributesOutput)

DeleteAttributesRequest generates a "aws/request.Request" representing the client's request for the DeleteAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteAttributes for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteAttributesRequest method.
req, resp := client.DeleteAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteAttributes

func (*ECS) DeleteAttributesWithContext ¶

func (c *ECS) DeleteAttributesWithContext(ctx aws.Context, input *DeleteAttributesInput, opts ...request.Option) (*DeleteAttributesOutput, error)

DeleteAttributesWithContext is the same as DeleteAttributes with the addition of the ability to pass a context and additional request options.

See DeleteAttributes for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DeleteCluster ¶

func (c *ECS) DeleteCluster(input *DeleteClusterInput) (*DeleteClusterOutput, error)

DeleteCluster API operation for Amazon EC2 Container Service.

Deletes the specified cluster. You must deregister all container instances from this cluster before you may delete it. You can list the container instances in a cluster with ListContainerInstances and deregister them with DeregisterContainerInstance.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DeleteCluster for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeClusterContainsContainerInstancesException "ClusterContainsContainerInstancesException"
You cannot delete a cluster that has registered container instances. You
must first deregister the container instances before you can delete the cluster.
For more information, see DeregisterContainerInstance.

* ErrCodeClusterContainsServicesException "ClusterContainsServicesException"
You cannot delete a cluster that contains services. You must first update
the service to reduce its desired task count to 0 and then delete the service.
For more information, see UpdateService and DeleteService.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteCluster

svc := ecs.New(session.New())
input := &ecs.DeleteClusterInput{
    Cluster: aws.String("my_cluster"),
}

result, err := svc.DeleteCluster(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        case ecs.ErrCodeClusterContainsContainerInstancesException:
            fmt.Println(ecs.ErrCodeClusterContainsContainerInstancesException, aerr.Error())
        case ecs.ErrCodeClusterContainsServicesException:
            fmt.Println(ecs.ErrCodeClusterContainsServicesException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DeleteClusterRequest ¶

func (c *ECS) DeleteClusterRequest(input *DeleteClusterInput) (req *request.Request, output *DeleteClusterOutput)

DeleteClusterRequest generates a "aws/request.Request" representing the client's request for the DeleteCluster operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteCluster for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteCluster method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteClusterRequest method.
req, resp := client.DeleteClusterRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteCluster

func (*ECS) DeleteClusterWithContext ¶

func (c *ECS) DeleteClusterWithContext(ctx aws.Context, input *DeleteClusterInput, opts ...request.Option) (*DeleteClusterOutput, error)

DeleteClusterWithContext is the same as DeleteCluster with the addition of the ability to pass a context and additional request options.

See DeleteCluster for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DeleteService ¶

func (c *ECS) DeleteService(input *DeleteServiceInput) (*DeleteServiceOutput, error)

DeleteService API operation for Amazon EC2 Container Service.

Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you cannot delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.

When you delete a service, if there are still running tasks that require cleanup, the service status moves from ACTIVE to DRAINING, and the service is no longer visible in the console or in ListServices API operations. After the tasks have stopped, then the service status moves from DRAINING to INACTIVE. Services in the DRAINING or INACTIVE status can still be viewed with DescribeServices API operations; however, in the future, INACTIVE services may be cleaned up and purged from Amazon ECS record keeping, and DescribeServices API operations on those services will return a ServiceNotFoundException error.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DeleteService for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeServiceNotFoundException "ServiceNotFoundException"
The specified service could not be found. You can view your available services
with ListServices. Amazon ECS services are cluster-specific and region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteService

svc := ecs.New(session.New())
input := &ecs.DeleteServiceInput{
    Service: aws.String("my-http-service"),
}

result, err := svc.DeleteService(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        case ecs.ErrCodeServiceNotFoundException:
            fmt.Println(ecs.ErrCodeServiceNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DeleteServiceRequest ¶

func (c *ECS) DeleteServiceRequest(input *DeleteServiceInput) (req *request.Request, output *DeleteServiceOutput)

DeleteServiceRequest generates a "aws/request.Request" representing the client's request for the DeleteService operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteService for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteService method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteServiceRequest method.
req, resp := client.DeleteServiceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeleteService

func (*ECS) DeleteServiceWithContext ¶

func (c *ECS) DeleteServiceWithContext(ctx aws.Context, input *DeleteServiceInput, opts ...request.Option) (*DeleteServiceOutput, error)

DeleteServiceWithContext is the same as DeleteService with the addition of the ability to pass a context and additional request options.

See DeleteService for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DeregisterContainerInstance ¶

func (c *ECS) DeregisterContainerInstance(input *DeregisterContainerInstanceInput) (*DeregisterContainerInstanceOutput, error)

DeregisterContainerInstance API operation for Amazon EC2 Container Service.

Deregisters an Amazon ECS container instance from the specified cluster. This instance is no longer available to run tasks.

If you intend to use the container instance for some other purpose after deregistration, you should stop all of the tasks running on the container instance before deregistration to avoid any orphaned tasks from consuming resources.

Deregistering a container instance removes the instance from a cluster, but it does not terminate the EC2 instance; if you are finished using the instance, be sure to terminate it in the Amazon EC2 console to stop billing.

If you terminate a running container instance, Amazon ECS automatically deregisters the instance from your cluster (stopped container instances or instances with disconnected agents are not automatically deregistered when terminated).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DeregisterContainerInstance for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterContainerInstance

svc := ecs.New(session.New())
input := &ecs.DeregisterContainerInstanceInput{
    Cluster:           aws.String("default"),
    ContainerInstance: aws.String("container_instance_UUID"),
    Force:             aws.Bool(true),
}

result, err := svc.DeregisterContainerInstance(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DeregisterContainerInstanceRequest ¶

func (c *ECS) DeregisterContainerInstanceRequest(input *DeregisterContainerInstanceInput) (req *request.Request, output *DeregisterContainerInstanceOutput)

DeregisterContainerInstanceRequest generates a "aws/request.Request" representing the client's request for the DeregisterContainerInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeregisterContainerInstance for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeregisterContainerInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeregisterContainerInstanceRequest method.
req, resp := client.DeregisterContainerInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterContainerInstance

func (*ECS) DeregisterContainerInstanceWithContext ¶

func (c *ECS) DeregisterContainerInstanceWithContext(ctx aws.Context, input *DeregisterContainerInstanceInput, opts ...request.Option) (*DeregisterContainerInstanceOutput, error)

DeregisterContainerInstanceWithContext is the same as DeregisterContainerInstance with the addition of the ability to pass a context and additional request options.

See DeregisterContainerInstance for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DeregisterTaskDefinition ¶

func (c *ECS) DeregisterTaskDefinition(input *DeregisterTaskDefinitionInput) (*DeregisterTaskDefinitionOutput, error)

DeregisterTaskDefinition API operation for Amazon EC2 Container Service.

Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is marked as INACTIVE. Existing tasks and services that reference an INACTIVE task definition continue to run without disruption. Existing services that reference an INACTIVE task definition can still scale up or down by modifying the service's desired count.

You cannot use an INACTIVE task definition to run new tasks or create new services, and you cannot update an existing service to reference an INACTIVE task definition (although there may be up to a 10 minute window following deregistration where these restrictions have not yet taken effect).

At this time, INACTIVE task definitions remain discoverable in your account indefinitely; however, this behavior is subject to change in the future, so you should not rely on INACTIVE task definitions persisting beyond the life cycle of any associated tasks and services.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DeregisterTaskDefinition for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterTaskDefinition

func (*ECS) DeregisterTaskDefinitionRequest ¶

func (c *ECS) DeregisterTaskDefinitionRequest(input *DeregisterTaskDefinitionInput) (req *request.Request, output *DeregisterTaskDefinitionOutput)

DeregisterTaskDefinitionRequest generates a "aws/request.Request" representing the client's request for the DeregisterTaskDefinition operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeregisterTaskDefinition for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeregisterTaskDefinition method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeregisterTaskDefinitionRequest method.
req, resp := client.DeregisterTaskDefinitionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DeregisterTaskDefinition

func (*ECS) DeregisterTaskDefinitionWithContext ¶

func (c *ECS) DeregisterTaskDefinitionWithContext(ctx aws.Context, input *DeregisterTaskDefinitionInput, opts ...request.Option) (*DeregisterTaskDefinitionOutput, error)

DeregisterTaskDefinitionWithContext is the same as DeregisterTaskDefinition with the addition of the ability to pass a context and additional request options.

See DeregisterTaskDefinition for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DescribeClusters ¶

func (c *ECS) DescribeClusters(input *DescribeClustersInput) (*DescribeClustersOutput, error)

DescribeClusters API operation for Amazon EC2 Container Service.

Describes one or more of your clusters.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DescribeClusters for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeClusters

svc := ecs.New(session.New())
input := &ecs.DescribeClustersInput{
    Clusters: []*string{
        aws.String("default"),
    },
}

result, err := svc.DescribeClusters(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DescribeClustersRequest ¶

func (c *ECS) DescribeClustersRequest(input *DescribeClustersInput) (req *request.Request, output *DescribeClustersOutput)

DescribeClustersRequest generates a "aws/request.Request" representing the client's request for the DescribeClusters operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeClusters for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeClusters method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeClustersRequest method.
req, resp := client.DescribeClustersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeClusters

func (*ECS) DescribeClustersWithContext ¶

func (c *ECS) DescribeClustersWithContext(ctx aws.Context, input *DescribeClustersInput, opts ...request.Option) (*DescribeClustersOutput, error)

DescribeClustersWithContext is the same as DescribeClusters with the addition of the ability to pass a context and additional request options.

See DescribeClusters for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DescribeContainerInstances ¶

func (c *ECS) DescribeContainerInstances(input *DescribeContainerInstancesInput) (*DescribeContainerInstancesOutput, error)

DescribeContainerInstances API operation for Amazon EC2 Container Service.

Describes Amazon EC2 Container Service container instances. Returns metadata about registered and remaining resources on each container instance requested.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DescribeContainerInstances for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeContainerInstances

svc := ecs.New(session.New())
input := &ecs.DescribeContainerInstancesInput{
    Cluster: aws.String("default"),
    ContainerInstances: []*string{
        aws.String("f2756532-8f13-4d53-87c9-aed50dc94cd7"),
    },
}

result, err := svc.DescribeContainerInstances(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DescribeContainerInstancesRequest ¶

func (c *ECS) DescribeContainerInstancesRequest(input *DescribeContainerInstancesInput) (req *request.Request, output *DescribeContainerInstancesOutput)

DescribeContainerInstancesRequest generates a "aws/request.Request" representing the client's request for the DescribeContainerInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeContainerInstances for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeContainerInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeContainerInstancesRequest method.
req, resp := client.DescribeContainerInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeContainerInstances

func (*ECS) DescribeContainerInstancesWithContext ¶

func (c *ECS) DescribeContainerInstancesWithContext(ctx aws.Context, input *DescribeContainerInstancesInput, opts ...request.Option) (*DescribeContainerInstancesOutput, error)

DescribeContainerInstancesWithContext is the same as DescribeContainerInstances with the addition of the ability to pass a context and additional request options.

See DescribeContainerInstances for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DescribeServices ¶

func (c *ECS) DescribeServices(input *DescribeServicesInput) (*DescribeServicesOutput, error)

DescribeServices API operation for Amazon EC2 Container Service.

Describes the specified services running in your cluster.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DescribeServices for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeServices

svc := ecs.New(session.New())
input := &ecs.DescribeServicesInput{
    Services: []*string{
        aws.String("ecs-simple-service"),
    },
}

result, err := svc.DescribeServices(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DescribeServicesRequest ¶

func (c *ECS) DescribeServicesRequest(input *DescribeServicesInput) (req *request.Request, output *DescribeServicesOutput)

DescribeServicesRequest generates a "aws/request.Request" representing the client's request for the DescribeServices operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeServices for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeServices method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeServicesRequest method.
req, resp := client.DescribeServicesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeServices

func (*ECS) DescribeServicesWithContext ¶

func (c *ECS) DescribeServicesWithContext(ctx aws.Context, input *DescribeServicesInput, opts ...request.Option) (*DescribeServicesOutput, error)

DescribeServicesWithContext is the same as DescribeServices with the addition of the ability to pass a context and additional request options.

See DescribeServices for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DescribeTaskDefinition ¶

func (c *ECS) DescribeTaskDefinition(input *DescribeTaskDefinitionInput) (*DescribeTaskDefinitionOutput, error)

DescribeTaskDefinition API operation for Amazon EC2 Container Service.

Describes a task definition. You can specify a family and revision to find information about a specific task definition, or you can simply specify the family to find the latest ACTIVE revision in that family.

You can only describe INACTIVE task definitions while an active task or service references them.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DescribeTaskDefinition for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTaskDefinition

svc := ecs.New(session.New())
input := &ecs.DescribeTaskDefinitionInput{
    TaskDefinition: aws.String("hello_world:8"),
}

result, err := svc.DescribeTaskDefinition(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DescribeTaskDefinitionRequest ¶

func (c *ECS) DescribeTaskDefinitionRequest(input *DescribeTaskDefinitionInput) (req *request.Request, output *DescribeTaskDefinitionOutput)

DescribeTaskDefinitionRequest generates a "aws/request.Request" representing the client's request for the DescribeTaskDefinition operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTaskDefinition for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTaskDefinition method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTaskDefinitionRequest method.
req, resp := client.DescribeTaskDefinitionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTaskDefinition

func (*ECS) DescribeTaskDefinitionWithContext ¶

func (c *ECS) DescribeTaskDefinitionWithContext(ctx aws.Context, input *DescribeTaskDefinitionInput, opts ...request.Option) (*DescribeTaskDefinitionOutput, error)

DescribeTaskDefinitionWithContext is the same as DescribeTaskDefinition with the addition of the ability to pass a context and additional request options.

See DescribeTaskDefinition for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DescribeTasks ¶

func (c *ECS) DescribeTasks(input *DescribeTasksInput) (*DescribeTasksOutput, error)

DescribeTasks API operation for Amazon EC2 Container Service.

Describes a specified task or tasks.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DescribeTasks for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTasks

svc := ecs.New(session.New())
input := &ecs.DescribeTasksInput{
    Tasks: []*string{
        aws.String("c5cba4eb-5dad-405e-96db-71ef8eefe6a8"),
    },
}

result, err := svc.DescribeTasks(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) DescribeTasksRequest ¶

func (c *ECS) DescribeTasksRequest(input *DescribeTasksInput) (req *request.Request, output *DescribeTasksOutput)

DescribeTasksRequest generates a "aws/request.Request" representing the client's request for the DescribeTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTasks for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTasksRequest method.
req, resp := client.DescribeTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DescribeTasks

func (*ECS) DescribeTasksWithContext ¶

func (c *ECS) DescribeTasksWithContext(ctx aws.Context, input *DescribeTasksInput, opts ...request.Option) (*DescribeTasksOutput, error)

DescribeTasksWithContext is the same as DescribeTasks with the addition of the ability to pass a context and additional request options.

See DescribeTasks for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) DiscoverPollEndpoint ¶

func (c *ECS) DiscoverPollEndpoint(input *DiscoverPollEndpointInput) (*DiscoverPollEndpointOutput, error)

DiscoverPollEndpoint API operation for Amazon EC2 Container Service.

This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.

Returns an endpoint for the Amazon EC2 Container Service agent to poll for updates.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation DiscoverPollEndpoint for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DiscoverPollEndpoint

func (*ECS) DiscoverPollEndpointRequest ¶

func (c *ECS) DiscoverPollEndpointRequest(input *DiscoverPollEndpointInput) (req *request.Request, output *DiscoverPollEndpointOutput)

DiscoverPollEndpointRequest generates a "aws/request.Request" representing the client's request for the DiscoverPollEndpoint operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DiscoverPollEndpoint for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DiscoverPollEndpoint method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DiscoverPollEndpointRequest method.
req, resp := client.DiscoverPollEndpointRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/DiscoverPollEndpoint

func (*ECS) DiscoverPollEndpointWithContext ¶

func (c *ECS) DiscoverPollEndpointWithContext(ctx aws.Context, input *DiscoverPollEndpointInput, opts ...request.Option) (*DiscoverPollEndpointOutput, error)

DiscoverPollEndpointWithContext is the same as DiscoverPollEndpoint with the addition of the ability to pass a context and additional request options.

See DiscoverPollEndpoint for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListAttributes ¶

func (c *ECS) ListAttributes(input *ListAttributesInput) (*ListAttributesOutput, error)

ListAttributes API operation for Amazon EC2 Container Service.

Lists the attributes for Amazon ECS resources within a specified target type and cluster. When you specify a target type and cluster, ListAttributes returns a list of attribute objects, one for each attribute on each resource. You can filter the list of results to a single attribute name to only return results that have that name. You can also filter the results by attribute name and value, for example, to see which container instances in a cluster are running a Linux AMI (ecs.os-type=linux).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation ListAttributes for usage and error information.

Returned Error Codes:

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListAttributes

func (*ECS) ListAttributesRequest ¶

func (c *ECS) ListAttributesRequest(input *ListAttributesInput) (req *request.Request, output *ListAttributesOutput)

ListAttributesRequest generates a "aws/request.Request" representing the client's request for the ListAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListAttributes for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListAttributesRequest method.
req, resp := client.ListAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListAttributes

func (*ECS) ListAttributesWithContext ¶

func (c *ECS) ListAttributesWithContext(ctx aws.Context, input *ListAttributesInput, opts ...request.Option) (*ListAttributesOutput, error)

ListAttributesWithContext is the same as ListAttributes with the addition of the ability to pass a context and additional request options.

See ListAttributes for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListClusters ¶

func (c *ECS) ListClusters(input *ListClustersInput) (*ListClustersOutput, error)

ListClusters API operation for Amazon EC2 Container Service.

Returns a list of existing clusters.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation ListClusters for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListClusters

svc := ecs.New(session.New())
input := &ecs.ListClustersInput{}

result, err := svc.ListClusters(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) ListClustersPages ¶

func (c *ECS) ListClustersPages(input *ListClustersInput, fn func(*ListClustersOutput, bool) bool) error

ListClustersPages iterates over the pages of a ListClusters operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListClusters method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListClusters operation.
pageNum := 0
err := client.ListClustersPages(params,
    func(page *ListClustersOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECS) ListClustersPagesWithContext ¶

func (c *ECS) ListClustersPagesWithContext(ctx aws.Context, input *ListClustersInput, fn func(*ListClustersOutput, bool) bool, opts ...request.Option) error

ListClustersPagesWithContext same as ListClustersPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListClustersRequest ¶

func (c *ECS) ListClustersRequest(input *ListClustersInput) (req *request.Request, output *ListClustersOutput)

ListClustersRequest generates a "aws/request.Request" representing the client's request for the ListClusters operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListClusters for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListClusters method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListClustersRequest method.
req, resp := client.ListClustersRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListClusters

func (*ECS) ListClustersWithContext ¶

func (c *ECS) ListClustersWithContext(ctx aws.Context, input *ListClustersInput, opts ...request.Option) (*ListClustersOutput, error)

ListClustersWithContext is the same as ListClusters with the addition of the ability to pass a context and additional request options.

See ListClusters for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListContainerInstances ¶

func (c *ECS) ListContainerInstances(input *ListContainerInstancesInput) (*ListContainerInstancesOutput, error)

ListContainerInstances API operation for Amazon EC2 Container Service.

Returns a list of container instances in a specified cluster. You can filter the results of a ListContainerInstances operation with cluster query language statements inside the filter parameter. For more information, see Cluster Query Language (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/cluster-query-language.html) in the Amazon EC2 Container Service Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation ListContainerInstances for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListContainerInstances

svc := ecs.New(session.New())
input := &ecs.ListContainerInstancesInput{
    Cluster: aws.String("default"),
}

result, err := svc.ListContainerInstances(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) ListContainerInstancesPages ¶

func (c *ECS) ListContainerInstancesPages(input *ListContainerInstancesInput, fn func(*ListContainerInstancesOutput, bool) bool) error

ListContainerInstancesPages iterates over the pages of a ListContainerInstances operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListContainerInstances method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListContainerInstances operation.
pageNum := 0
err := client.ListContainerInstancesPages(params,
    func(page *ListContainerInstancesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECS) ListContainerInstancesPagesWithContext ¶

func (c *ECS) ListContainerInstancesPagesWithContext(ctx aws.Context, input *ListContainerInstancesInput, fn func(*ListContainerInstancesOutput, bool) bool, opts ...request.Option) error

ListContainerInstancesPagesWithContext same as ListContainerInstancesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListContainerInstancesRequest ¶

func (c *ECS) ListContainerInstancesRequest(input *ListContainerInstancesInput) (req *request.Request, output *ListContainerInstancesOutput)

ListContainerInstancesRequest generates a "aws/request.Request" representing the client's request for the ListContainerInstances operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListContainerInstances for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListContainerInstances method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListContainerInstancesRequest method.
req, resp := client.ListContainerInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListContainerInstances

func (*ECS) ListContainerInstancesWithContext ¶

func (c *ECS) ListContainerInstancesWithContext(ctx aws.Context, input *ListContainerInstancesInput, opts ...request.Option) (*ListContainerInstancesOutput, error)

ListContainerInstancesWithContext is the same as ListContainerInstances with the addition of the ability to pass a context and additional request options.

See ListContainerInstances for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListServices ¶

func (c *ECS) ListServices(input *ListServicesInput) (*ListServicesOutput, error)

ListServices API operation for Amazon EC2 Container Service.

Lists the services that are running in a specified cluster.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation ListServices for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListServices

svc := ecs.New(session.New())
input := &ecs.ListServicesInput{}

result, err := svc.ListServices(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) ListServicesPages ¶

func (c *ECS) ListServicesPages(input *ListServicesInput, fn func(*ListServicesOutput, bool) bool) error

ListServicesPages iterates over the pages of a ListServices operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListServices method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListServices operation.
pageNum := 0
err := client.ListServicesPages(params,
    func(page *ListServicesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECS) ListServicesPagesWithContext ¶

func (c *ECS) ListServicesPagesWithContext(ctx aws.Context, input *ListServicesInput, fn func(*ListServicesOutput, bool) bool, opts ...request.Option) error

ListServicesPagesWithContext same as ListServicesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListServicesRequest ¶

func (c *ECS) ListServicesRequest(input *ListServicesInput) (req *request.Request, output *ListServicesOutput)

ListServicesRequest generates a "aws/request.Request" representing the client's request for the ListServices operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListServices for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListServices method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListServicesRequest method.
req, resp := client.ListServicesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListServices

func (*ECS) ListServicesWithContext ¶

func (c *ECS) ListServicesWithContext(ctx aws.Context, input *ListServicesInput, opts ...request.Option) (*ListServicesOutput, error)

ListServicesWithContext is the same as ListServices with the addition of the ability to pass a context and additional request options.

See ListServices for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListTaskDefinitionFamilies ¶

func (c *ECS) ListTaskDefinitionFamilies(input *ListTaskDefinitionFamiliesInput) (*ListTaskDefinitionFamiliesOutput, error)

ListTaskDefinitionFamilies API operation for Amazon EC2 Container Service.

Returns a list of task definition families that are registered to your account (which may include task definition families that no longer have any ACTIVE task definition revisions).

You can filter out task definition families that do not contain any ACTIVE task definition revisions by setting the status parameter to ACTIVE. You can also filter the results with the familyPrefix parameter.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation ListTaskDefinitionFamilies for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitionFamilies

svc := ecs.New(session.New())
input := &ecs.ListTaskDefinitionFamiliesInput{}

result, err := svc.ListTaskDefinitionFamilies(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := ecs.New(session.New())
input := &ecs.ListTaskDefinitionFamiliesInput{
    FamilyPrefix: aws.String("hpcc"),
}

result, err := svc.ListTaskDefinitionFamilies(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) ListTaskDefinitionFamiliesPages ¶

func (c *ECS) ListTaskDefinitionFamiliesPages(input *ListTaskDefinitionFamiliesInput, fn func(*ListTaskDefinitionFamiliesOutput, bool) bool) error

ListTaskDefinitionFamiliesPages iterates over the pages of a ListTaskDefinitionFamilies operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListTaskDefinitionFamilies method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListTaskDefinitionFamilies operation.
pageNum := 0
err := client.ListTaskDefinitionFamiliesPages(params,
    func(page *ListTaskDefinitionFamiliesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECS) ListTaskDefinitionFamiliesPagesWithContext ¶

func (c *ECS) ListTaskDefinitionFamiliesPagesWithContext(ctx aws.Context, input *ListTaskDefinitionFamiliesInput, fn func(*ListTaskDefinitionFamiliesOutput, bool) bool, opts ...request.Option) error

ListTaskDefinitionFamiliesPagesWithContext same as ListTaskDefinitionFamiliesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListTaskDefinitionFamiliesRequest ¶

func (c *ECS) ListTaskDefinitionFamiliesRequest(input *ListTaskDefinitionFamiliesInput) (req *request.Request, output *ListTaskDefinitionFamiliesOutput)

ListTaskDefinitionFamiliesRequest generates a "aws/request.Request" representing the client's request for the ListTaskDefinitionFamilies operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTaskDefinitionFamilies for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTaskDefinitionFamilies method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTaskDefinitionFamiliesRequest method.
req, resp := client.ListTaskDefinitionFamiliesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitionFamilies

func (*ECS) ListTaskDefinitionFamiliesWithContext ¶

func (c *ECS) ListTaskDefinitionFamiliesWithContext(ctx aws.Context, input *ListTaskDefinitionFamiliesInput, opts ...request.Option) (*ListTaskDefinitionFamiliesOutput, error)

ListTaskDefinitionFamiliesWithContext is the same as ListTaskDefinitionFamilies with the addition of the ability to pass a context and additional request options.

See ListTaskDefinitionFamilies for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListTaskDefinitions ¶

func (c *ECS) ListTaskDefinitions(input *ListTaskDefinitionsInput) (*ListTaskDefinitionsOutput, error)

ListTaskDefinitions API operation for Amazon EC2 Container Service.

Returns a list of task definitions that are registered to your account. You can filter the results by family name with the familyPrefix parameter or by status with the status parameter.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation ListTaskDefinitions for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitions

svc := ecs.New(session.New())
input := &ecs.ListTaskDefinitionsInput{}

result, err := svc.ListTaskDefinitions(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := ecs.New(session.New())
input := &ecs.ListTaskDefinitionsInput{
    FamilyPrefix: aws.String("wordpress"),
}

result, err := svc.ListTaskDefinitions(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) ListTaskDefinitionsPages ¶

func (c *ECS) ListTaskDefinitionsPages(input *ListTaskDefinitionsInput, fn func(*ListTaskDefinitionsOutput, bool) bool) error

ListTaskDefinitionsPages iterates over the pages of a ListTaskDefinitions operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListTaskDefinitions method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListTaskDefinitions operation.
pageNum := 0
err := client.ListTaskDefinitionsPages(params,
    func(page *ListTaskDefinitionsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECS) ListTaskDefinitionsPagesWithContext ¶

func (c *ECS) ListTaskDefinitionsPagesWithContext(ctx aws.Context, input *ListTaskDefinitionsInput, fn func(*ListTaskDefinitionsOutput, bool) bool, opts ...request.Option) error

ListTaskDefinitionsPagesWithContext same as ListTaskDefinitionsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListTaskDefinitionsRequest ¶

func (c *ECS) ListTaskDefinitionsRequest(input *ListTaskDefinitionsInput) (req *request.Request, output *ListTaskDefinitionsOutput)

ListTaskDefinitionsRequest generates a "aws/request.Request" representing the client's request for the ListTaskDefinitions operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTaskDefinitions for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTaskDefinitions method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTaskDefinitionsRequest method.
req, resp := client.ListTaskDefinitionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitions

func (*ECS) ListTaskDefinitionsWithContext ¶

func (c *ECS) ListTaskDefinitionsWithContext(ctx aws.Context, input *ListTaskDefinitionsInput, opts ...request.Option) (*ListTaskDefinitionsOutput, error)

ListTaskDefinitionsWithContext is the same as ListTaskDefinitions with the addition of the ability to pass a context and additional request options.

See ListTaskDefinitions for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListTasks ¶

func (c *ECS) ListTasks(input *ListTasksInput) (*ListTasksOutput, error)

ListTasks API operation for Amazon EC2 Container Service.

Returns a list of tasks for a specified cluster. You can filter the results by family name, by a particular container instance, or by the desired status of the task with the family, containerInstance, and desiredStatus parameters.

Recently-stopped tasks might appear in the returned results. Currently, stopped tasks appear in the returned results for at least one hour.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation ListTasks for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeServiceNotFoundException "ServiceNotFoundException"
The specified service could not be found. You can view your available services
with ListServices. Amazon ECS services are cluster-specific and region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTasks

svc := ecs.New(session.New())
input := &ecs.ListTasksInput{
    Cluster: aws.String("default"),
}

result, err := svc.ListTasks(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        case ecs.ErrCodeServiceNotFoundException:
            fmt.Println(ecs.ErrCodeServiceNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := ecs.New(session.New())
input := &ecs.ListTasksInput{
    Cluster:           aws.String("default"),
    ContainerInstance: aws.String("f6bbb147-5370-4ace-8c73-c7181ded911f"),
}

result, err := svc.ListTasks(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        case ecs.ErrCodeServiceNotFoundException:
            fmt.Println(ecs.ErrCodeServiceNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) ListTasksPages ¶

func (c *ECS) ListTasksPages(input *ListTasksInput, fn func(*ListTasksOutput, bool) bool) error

ListTasksPages iterates over the pages of a ListTasks operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListTasks method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListTasks operation.
pageNum := 0
err := client.ListTasksPages(params,
    func(page *ListTasksOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*ECS) ListTasksPagesWithContext ¶

func (c *ECS) ListTasksPagesWithContext(ctx aws.Context, input *ListTasksInput, fn func(*ListTasksOutput, bool) bool, opts ...request.Option) error

ListTasksPagesWithContext same as ListTasksPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) ListTasksRequest ¶

func (c *ECS) ListTasksRequest(input *ListTasksInput) (req *request.Request, output *ListTasksOutput)

ListTasksRequest generates a "aws/request.Request" representing the client's request for the ListTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListTasks for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListTasksRequest method.
req, resp := client.ListTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTasks

func (*ECS) ListTasksWithContext ¶

func (c *ECS) ListTasksWithContext(ctx aws.Context, input *ListTasksInput, opts ...request.Option) (*ListTasksOutput, error)

ListTasksWithContext is the same as ListTasks with the addition of the ability to pass a context and additional request options.

See ListTasks for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) PutAttributes ¶

func (c *ECS) PutAttributes(input *PutAttributesInput) (*PutAttributesOutput, error)

PutAttributes API operation for Amazon EC2 Container Service.

Create or update an attribute on an Amazon ECS resource. If the attribute does not exist, it is created. If the attribute exists, its value is replaced with the specified value. To delete an attribute, use DeleteAttributes. For more information, see Attributes (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html#attributes) in the Amazon EC2 Container Service Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation PutAttributes for usage and error information.

Returned Error Codes:

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeTargetNotFoundException "TargetNotFoundException"
The specified target could not be found. You can view your available container
instances with ListContainerInstances. Amazon ECS container instances are
cluster-specific and region-specific.

* ErrCodeAttributeLimitExceededException "AttributeLimitExceededException"
You can apply up to 10 custom attributes per resource. You can view the attributes
of a resource with ListAttributes. You can remove existing attributes on
a resource with DeleteAttributes.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/PutAttributes

func (*ECS) PutAttributesRequest ¶

func (c *ECS) PutAttributesRequest(input *PutAttributesInput) (req *request.Request, output *PutAttributesOutput)

PutAttributesRequest generates a "aws/request.Request" representing the client's request for the PutAttributes operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See PutAttributes for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the PutAttributes method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the PutAttributesRequest method.
req, resp := client.PutAttributesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/PutAttributes

func (*ECS) PutAttributesWithContext ¶

func (c *ECS) PutAttributesWithContext(ctx aws.Context, input *PutAttributesInput, opts ...request.Option) (*PutAttributesOutput, error)

PutAttributesWithContext is the same as PutAttributes with the addition of the ability to pass a context and additional request options.

See PutAttributes for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) RegisterContainerInstance ¶

func (c *ECS) RegisterContainerInstance(input *RegisterContainerInstanceInput) (*RegisterContainerInstanceOutput, error)

RegisterContainerInstance API operation for Amazon EC2 Container Service.

This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.

Registers an EC2 instance into the specified cluster. This instance becomes available to place containers on.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation RegisterContainerInstance for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterContainerInstance

func (*ECS) RegisterContainerInstanceRequest ¶

func (c *ECS) RegisterContainerInstanceRequest(input *RegisterContainerInstanceInput) (req *request.Request, output *RegisterContainerInstanceOutput)

RegisterContainerInstanceRequest generates a "aws/request.Request" representing the client's request for the RegisterContainerInstance operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See RegisterContainerInstance for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RegisterContainerInstance method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the RegisterContainerInstanceRequest method.
req, resp := client.RegisterContainerInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterContainerInstance

func (*ECS) RegisterContainerInstanceWithContext ¶

func (c *ECS) RegisterContainerInstanceWithContext(ctx aws.Context, input *RegisterContainerInstanceInput, opts ...request.Option) (*RegisterContainerInstanceOutput, error)

RegisterContainerInstanceWithContext is the same as RegisterContainerInstance with the addition of the ability to pass a context and additional request options.

See RegisterContainerInstance for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) RegisterTaskDefinition ¶

func (c *ECS) RegisterTaskDefinition(input *RegisterTaskDefinitionInput) (*RegisterTaskDefinitionOutput, error)

RegisterTaskDefinition API operation for Amazon EC2 Container Service.

Registers a new task definition from the supplied family and containerDefinitions. Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html) in the Amazon EC2 Container Service Developer Guide.

You can specify an IAM role for your task with the taskRoleArn parameter. When you specify an IAM role for a task, its containers can then use the latest versions of the AWS CLI or SDKs to make API requests to the AWS services that are specified in the IAM policy associated with the role. For more information, see IAM Roles for Tasks (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html) in the Amazon EC2 Container Service Developer Guide.

You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. The available network modes correspond to those described in Network settings (https://docs.docker.com/engine/reference/run/#/network-settings) in the Docker run reference.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation RegisterTaskDefinition for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterTaskDefinition

svc := ecs.New(session.New())
input := &ecs.RegisterTaskDefinitionInput{
    ContainerDefinitions: []*ecs.ContainerDefinition{
        {
            Command: []*string{
                aws.String("sleep"),
                aws.String("360"),
            },
            Cpu:       aws.Int64(10),
            Essential: aws.Bool(true),
            Image:     aws.String("busybox"),
            Memory:    aws.Int64(10),
            Name:      aws.String("sleep"),
        },
    },
    Family:      aws.String("sleep360"),
    TaskRoleArn: aws.String(""),
}

result, err := svc.RegisterTaskDefinition(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) RegisterTaskDefinitionRequest ¶

func (c *ECS) RegisterTaskDefinitionRequest(input *RegisterTaskDefinitionInput) (req *request.Request, output *RegisterTaskDefinitionOutput)

RegisterTaskDefinitionRequest generates a "aws/request.Request" representing the client's request for the RegisterTaskDefinition operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See RegisterTaskDefinition for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RegisterTaskDefinition method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the RegisterTaskDefinitionRequest method.
req, resp := client.RegisterTaskDefinitionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterTaskDefinition

func (*ECS) RegisterTaskDefinitionWithContext ¶

func (c *ECS) RegisterTaskDefinitionWithContext(ctx aws.Context, input *RegisterTaskDefinitionInput, opts ...request.Option) (*RegisterTaskDefinitionOutput, error)

RegisterTaskDefinitionWithContext is the same as RegisterTaskDefinition with the addition of the ability to pass a context and additional request options.

See RegisterTaskDefinition for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) RunTask ¶

func (c *ECS) RunTask(input *RunTaskInput) (*RunTaskOutput, error)

RunTask API operation for Amazon EC2 Container Service.

Starts a new task using the specified task definition.

You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html) in the Amazon EC2 Container Service Developer Guide.

Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation RunTask for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RunTask

svc := ecs.New(session.New())
input := &ecs.RunTaskInput{
    Cluster:        aws.String("default"),
    TaskDefinition: aws.String("sleep360:1"),
}

result, err := svc.RunTask(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) RunTaskRequest ¶

func (c *ECS) RunTaskRequest(input *RunTaskInput) (req *request.Request, output *RunTaskOutput)

RunTaskRequest generates a "aws/request.Request" representing the client's request for the RunTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See RunTask for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RunTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the RunTaskRequest method.
req, resp := client.RunTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RunTask

func (*ECS) RunTaskWithContext ¶

func (c *ECS) RunTaskWithContext(ctx aws.Context, input *RunTaskInput, opts ...request.Option) (*RunTaskOutput, error)

RunTaskWithContext is the same as RunTask with the addition of the ability to pass a context and additional request options.

See RunTask for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) StartTask ¶

func (c *ECS) StartTask(input *StartTaskInput) (*StartTaskOutput, error)

StartTask API operation for Amazon EC2 Container Service.

Starts a new task from the specified task definition on the specified container instance or instances.

Alternatively, you can use RunTask to place tasks for you. For more information, see Scheduling Tasks (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html) in the Amazon EC2 Container Service Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation StartTask for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StartTask

func (*ECS) StartTaskRequest ¶

func (c *ECS) StartTaskRequest(input *StartTaskInput) (req *request.Request, output *StartTaskOutput)

StartTaskRequest generates a "aws/request.Request" representing the client's request for the StartTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See StartTask for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StartTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the StartTaskRequest method.
req, resp := client.StartTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StartTask

func (*ECS) StartTaskWithContext ¶

func (c *ECS) StartTaskWithContext(ctx aws.Context, input *StartTaskInput, opts ...request.Option) (*StartTaskOutput, error)

StartTaskWithContext is the same as StartTask with the addition of the ability to pass a context and additional request options.

See StartTask for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) StopTask ¶

func (c *ECS) StopTask(input *StopTaskInput) (*StopTaskOutput, error)

StopTask API operation for Amazon EC2 Container Service.

Stops a running task.

When StopTask is called on a task, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM and a default 30-second timeout, after which SIGKILL is sent and the containers are forcibly stopped. If the container handles the SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.

The default 30-second timeout can be configured on the Amazon ECS container agent with the ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container Agent Configuration (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html) in the Amazon EC2 Container Service Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation StopTask for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StopTask

func (*ECS) StopTaskRequest ¶

func (c *ECS) StopTaskRequest(input *StopTaskInput) (req *request.Request, output *StopTaskOutput)

StopTaskRequest generates a "aws/request.Request" representing the client's request for the StopTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See StopTask for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StopTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the StopTaskRequest method.
req, resp := client.StopTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StopTask

func (*ECS) StopTaskWithContext ¶

func (c *ECS) StopTaskWithContext(ctx aws.Context, input *StopTaskInput, opts ...request.Option) (*StopTaskOutput, error)

StopTaskWithContext is the same as StopTask with the addition of the ability to pass a context and additional request options.

See StopTask for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) SubmitContainerStateChange ¶

func (c *ECS) SubmitContainerStateChange(input *SubmitContainerStateChangeInput) (*SubmitContainerStateChangeOutput, error)

SubmitContainerStateChange API operation for Amazon EC2 Container Service.

This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.

Sent to acknowledge that a container changed states.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation SubmitContainerStateChange for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitContainerStateChange

func (*ECS) SubmitContainerStateChangeRequest ¶

func (c *ECS) SubmitContainerStateChangeRequest(input *SubmitContainerStateChangeInput) (req *request.Request, output *SubmitContainerStateChangeOutput)

SubmitContainerStateChangeRequest generates a "aws/request.Request" representing the client's request for the SubmitContainerStateChange operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See SubmitContainerStateChange for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the SubmitContainerStateChange method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the SubmitContainerStateChangeRequest method.
req, resp := client.SubmitContainerStateChangeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitContainerStateChange

func (*ECS) SubmitContainerStateChangeWithContext ¶

func (c *ECS) SubmitContainerStateChangeWithContext(ctx aws.Context, input *SubmitContainerStateChangeInput, opts ...request.Option) (*SubmitContainerStateChangeOutput, error)

SubmitContainerStateChangeWithContext is the same as SubmitContainerStateChange with the addition of the ability to pass a context and additional request options.

See SubmitContainerStateChange for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) SubmitTaskStateChange ¶

func (c *ECS) SubmitTaskStateChange(input *SubmitTaskStateChangeInput) (*SubmitTaskStateChangeOutput, error)

SubmitTaskStateChange API operation for Amazon EC2 Container Service.

This action is only used by the Amazon EC2 Container Service agent, and it is not intended for use outside of the agent.

Sent to acknowledge that a task changed states.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation SubmitTaskStateChange for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitTaskStateChange

func (*ECS) SubmitTaskStateChangeRequest ¶

func (c *ECS) SubmitTaskStateChangeRequest(input *SubmitTaskStateChangeInput) (req *request.Request, output *SubmitTaskStateChangeOutput)

SubmitTaskStateChangeRequest generates a "aws/request.Request" representing the client's request for the SubmitTaskStateChange operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See SubmitTaskStateChange for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the SubmitTaskStateChange method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the SubmitTaskStateChangeRequest method.
req, resp := client.SubmitTaskStateChangeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitTaskStateChange

func (*ECS) SubmitTaskStateChangeWithContext ¶

func (c *ECS) SubmitTaskStateChangeWithContext(ctx aws.Context, input *SubmitTaskStateChangeInput, opts ...request.Option) (*SubmitTaskStateChangeOutput, error)

SubmitTaskStateChangeWithContext is the same as SubmitTaskStateChange with the addition of the ability to pass a context and additional request options.

See SubmitTaskStateChange for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) UpdateContainerAgent ¶

func (c *ECS) UpdateContainerAgent(input *UpdateContainerAgentInput) (*UpdateContainerAgentOutput, error)

UpdateContainerAgent API operation for Amazon EC2 Container Service.

Updates the Amazon ECS container agent on a specified container instance. Updating the Amazon ECS container agent does not interrupt running tasks or services on the container instance. The process for updating the agent differs depending on whether your container instance was launched with the Amazon ECS-optimized AMI or another operating system.

UpdateContainerAgent requires the Amazon ECS-optimized AMI or Amazon Linux with the ecs-init service installed and running. For help updating the Amazon ECS container agent on other operating systems, see Manually Updating the Amazon ECS Container Agent (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-update.html#manually_update_agent) in the Amazon EC2 Container Service Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation UpdateContainerAgent for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeUpdateInProgressException "UpdateInProgressException"
There is already a current Amazon ECS container agent update in progress
on the specified container instance. If the container agent becomes disconnected
while it is in a transitional stage, such as PENDING or STAGING, the update
process can get stuck in that state. However, when the agent reconnects,
it resumes where it stopped previously.

* ErrCodeNoUpdateAvailableException "NoUpdateAvailableException"
There is no update available for this Amazon ECS container agent. This could
be because the agent is already running the latest version, or it is so old
that there is no update path to the current version.

* ErrCodeMissingVersionException "MissingVersionException"
Amazon ECS is unable to determine the current version of the Amazon ECS container
agent on the container instance and does not have enough information to proceed
with an update. This could be because the agent running on the container
instance is an older or custom version that does not use our version information.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerAgent

func (*ECS) UpdateContainerAgentRequest ¶

func (c *ECS) UpdateContainerAgentRequest(input *UpdateContainerAgentInput) (req *request.Request, output *UpdateContainerAgentOutput)

UpdateContainerAgentRequest generates a "aws/request.Request" representing the client's request for the UpdateContainerAgent operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateContainerAgent for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateContainerAgent method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateContainerAgentRequest method.
req, resp := client.UpdateContainerAgentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerAgent

func (*ECS) UpdateContainerAgentWithContext ¶

func (c *ECS) UpdateContainerAgentWithContext(ctx aws.Context, input *UpdateContainerAgentInput, opts ...request.Option) (*UpdateContainerAgentOutput, error)

UpdateContainerAgentWithContext is the same as UpdateContainerAgent with the addition of the ability to pass a context and additional request options.

See UpdateContainerAgent for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) UpdateContainerInstancesState ¶

func (c *ECS) UpdateContainerInstancesState(input *UpdateContainerInstancesStateInput) (*UpdateContainerInstancesStateOutput, error)

UpdateContainerInstancesState API operation for Amazon EC2 Container Service.

Modifies the status of an Amazon ECS container instance.

You can change the status of a container instance to DRAINING to manually remove an instance from a cluster, for example to perform system updates, update the Docker daemon, or scale down the cluster size.

When you set a container instance to DRAINING, Amazon ECS prevents new tasks from being scheduled for placement on the container instance and replacement service tasks are started on other container instances in the cluster if the resources are available. Service tasks on the container instance that are in the PENDING state are stopped immediately.

Service tasks on the container instance that are in the RUNNING state are stopped and replaced according the service's deployment configuration parameters, minimumHealthyPercent and maximumPercent. Note that you can change the deployment configuration of your service using UpdateService.

* If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
temporarily during task replacement. For example, desiredCount is four
tasks, a minimum of 50% allows the scheduler to stop two existing tasks
before starting two new tasks. If the minimum is 100%, the service scheduler
can't remove existing tasks until the replacement tasks are considered
healthy. Tasks for services that do not use a load balancer are considered
healthy if they are in the RUNNING state. Tasks for services that use
a load balancer are considered healthy if they are in the RUNNING state
and the container instance they are hosted on is reported as healthy by
the load balancer.

* The maximumPercent parameter represents an upper limit on the number
of running tasks during task replacement, which enables you to define
the replacement batch size. For example, if desiredCount of four tasks,
a maximum of 200% starts four new tasks before stopping the four tasks
to be drained (provided that the cluster resources required to do this
are available). If the maximum is 100%, then replacement tasks can't start
until the draining tasks have stopped.

Any PENDING or RUNNING tasks that do not belong to a service are not affected; you must wait for them to finish or stop them manually.

A container instance has completed draining when it has no more RUNNING tasks. You can verify this using ListTasks.

When you set a container instance to ACTIVE, the Amazon ECS scheduler can begin scheduling tasks on the instance again.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation UpdateContainerInstancesState for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerInstancesState

func (*ECS) UpdateContainerInstancesStateRequest ¶

func (c *ECS) UpdateContainerInstancesStateRequest(input *UpdateContainerInstancesStateInput) (req *request.Request, output *UpdateContainerInstancesStateOutput)

UpdateContainerInstancesStateRequest generates a "aws/request.Request" representing the client's request for the UpdateContainerInstancesState operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateContainerInstancesState for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateContainerInstancesState method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateContainerInstancesStateRequest method.
req, resp := client.UpdateContainerInstancesStateRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerInstancesState

func (*ECS) UpdateContainerInstancesStateWithContext ¶

func (c *ECS) UpdateContainerInstancesStateWithContext(ctx aws.Context, input *UpdateContainerInstancesStateInput, opts ...request.Option) (*UpdateContainerInstancesStateOutput, error)

UpdateContainerInstancesStateWithContext is the same as UpdateContainerInstancesState with the addition of the ability to pass a context and additional request options.

See UpdateContainerInstancesState for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) UpdateService ¶

func (c *ECS) UpdateService(input *UpdateServiceInput) (*UpdateServiceOutput, error)

UpdateService API operation for Amazon EC2 Container Service.

Modifies the desired count, deployment configuration, or task definition used in a service.

You can add to or subtract from the number of instantiations of a task definition in a service by specifying the cluster that the service is running in and a new desiredCount parameter.

You can use UpdateService to modify your task definition and deploy a new version of your service.

You can also update the deployment configuration of a service. When a deployment is triggered by updating the task definition of a service, the service scheduler uses the deployment configuration parameters, minimumHealthyPercent and maximumPercent, to determine the deployment strategy.

* If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount
temporarily during a deployment. For example, if desiredCount is four
tasks, a minimum of 50% allows the scheduler to stop two existing tasks
before starting two new tasks. Tasks for services that do not use a load
balancer are considered healthy if they are in the RUNNING state. Tasks
for services that use a load balancer are considered healthy if they are
in the RUNNING state and the container instance they are hosted on is
reported as healthy by the load balancer.

* The maximumPercent parameter represents an upper limit on the number
of running tasks during a deployment, which enables you to define the
deployment batch size. For example, if desiredCount is four tasks, a maximum
of 200% starts four new tasks before stopping the four older tasks (provided
that the cluster resources required to do this are available).

When UpdateService stops a task during a deployment, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM and a 30-second timeout, after which SIGKILL is sent and the containers are forcibly stopped. If the container handles the SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.

When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic:

* Determine which of the container instances in your cluster can support
your service's task definition (for example, they have the required CPU,
memory, ports, and container instance attributes).

* By default, the service scheduler attempts to balance tasks across Availability
Zones in this manner (although you can choose a different placement strategy):

Sort the valid container instances by the fewest number of running tasks

for this service in the same Availability Zone as the instance. For example,
if zone A has one running service task and zones B and C each have zero,
valid container instances in either zone B or C are considered optimal
for placement.

Place the new service task on a valid container instance in an optimal Availability

Zone (based on the previous steps), favoring container instances with
the fewest number of running tasks for this service.

When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:

* Sort the container instances by the largest number of running tasks
for this service in the same Availability Zone as the instance. For example,
if zone A has one running service task and zones B and C each have two,
container instances in either zone B or C are considered optimal for termination.

* Stop the task on a container instance in an optimal Availability Zone
(based on the previous steps), favoring container instances with the largest
number of running tasks for this service.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon EC2 Container Service's API operation UpdateService for usage and error information.

Returned Error Codes:

* ErrCodeServerException "ServerException"
These errors are usually caused by a server issue.

* ErrCodeClientException "ClientException"
These errors are usually caused by a client action, such as using an action
or resource on behalf of a user that doesn't have permission to use the action
or resource, or specifying an identifier that is not valid.

* ErrCodeInvalidParameterException "InvalidParameterException"
The specified parameter is invalid. Review the available parameters for the
API request.

* ErrCodeClusterNotFoundException "ClusterNotFoundException"
The specified cluster could not be found. You can view your available clusters
with ListClusters. Amazon ECS clusters are region-specific.

* ErrCodeServiceNotFoundException "ServiceNotFoundException"
The specified service could not be found. You can view your available services
with ListServices. Amazon ECS services are cluster-specific and region-specific.

* ErrCodeServiceNotActiveException "ServiceNotActiveException"
The specified service is not active. You cannot update a service that is
not active. If you have previously deleted a service, you can re-create it
with CreateService.

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateService

svc := ecs.New(session.New())
input := &ecs.UpdateServiceInput{
    Service:        aws.String("my-http-service"),
    TaskDefinition: aws.String("amazon-ecs-sample"),
}

result, err := svc.UpdateService(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        case ecs.ErrCodeServiceNotFoundException:
            fmt.Println(ecs.ErrCodeServiceNotFoundException, aerr.Error())
        case ecs.ErrCodeServiceNotActiveException:
            fmt.Println(ecs.ErrCodeServiceNotActiveException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := ecs.New(session.New())
input := &ecs.UpdateServiceInput{
    DesiredCount: aws.Int64(10),
    Service:      aws.String("my-http-service"),
}

result, err := svc.UpdateService(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case ecs.ErrCodeServerException:
            fmt.Println(ecs.ErrCodeServerException, aerr.Error())
        case ecs.ErrCodeClientException:
            fmt.Println(ecs.ErrCodeClientException, aerr.Error())
        case ecs.ErrCodeInvalidParameterException:
            fmt.Println(ecs.ErrCodeInvalidParameterException, aerr.Error())
        case ecs.ErrCodeClusterNotFoundException:
            fmt.Println(ecs.ErrCodeClusterNotFoundException, aerr.Error())
        case ecs.ErrCodeServiceNotFoundException:
            fmt.Println(ecs.ErrCodeServiceNotFoundException, aerr.Error())
        case ecs.ErrCodeServiceNotActiveException:
            fmt.Println(ecs.ErrCodeServiceNotActiveException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*ECS) UpdateServiceRequest ¶

func (c *ECS) UpdateServiceRequest(input *UpdateServiceInput) (req *request.Request, output *UpdateServiceOutput)

UpdateServiceRequest generates a "aws/request.Request" representing the client's request for the UpdateService operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateService for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateService method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateServiceRequest method.
req, resp := client.UpdateServiceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateService

func (*ECS) UpdateServiceWithContext ¶

func (c *ECS) UpdateServiceWithContext(ctx aws.Context, input *UpdateServiceInput, opts ...request.Option) (*UpdateServiceOutput, error)

UpdateServiceWithContext is the same as UpdateService with the addition of the ability to pass a context and additional request options.

See UpdateService for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) WaitUntilServicesInactive ¶

func (c *ECS) WaitUntilServicesInactive(input *DescribeServicesInput) error

WaitUntilServicesInactive uses the Amazon ECS API operation DescribeServices to wait for a condition to be met before returning. If the condition is not meet within the max attempt window an error will be returned.

func (*ECS) WaitUntilServicesInactiveWithContext ¶

func (c *ECS) WaitUntilServicesInactiveWithContext(ctx aws.Context, input *DescribeServicesInput, opts ...request.WaiterOption) error

WaitUntilServicesInactiveWithContext is an extended version of WaitUntilServicesInactive. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) WaitUntilServicesStable ¶

func (c *ECS) WaitUntilServicesStable(input *DescribeServicesInput) error

WaitUntilServicesStable uses the Amazon ECS API operation DescribeServices to wait for a condition to be met before returning. If the condition is not meet within the max attempt window an error will be returned.

func (*ECS) WaitUntilServicesStableWithContext ¶

func (c *ECS) WaitUntilServicesStableWithContext(ctx aws.Context, input *DescribeServicesInput, opts ...request.WaiterOption) error

WaitUntilServicesStableWithContext is an extended version of WaitUntilServicesStable. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) WaitUntilTasksRunning ¶

func (c *ECS) WaitUntilTasksRunning(input *DescribeTasksInput) error

WaitUntilTasksRunning uses the Amazon ECS API operation DescribeTasks to wait for a condition to be met before returning. If the condition is not meet within the max attempt window an error will be returned.

func (*ECS) WaitUntilTasksRunningWithContext ¶

func (c *ECS) WaitUntilTasksRunningWithContext(ctx aws.Context, input *DescribeTasksInput, opts ...request.WaiterOption) error

WaitUntilTasksRunningWithContext is an extended version of WaitUntilTasksRunning. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ECS) WaitUntilTasksStopped ¶

func (c *ECS) WaitUntilTasksStopped(input *DescribeTasksInput) error

WaitUntilTasksStopped uses the Amazon ECS API operation DescribeTasks to wait for a condition to be met before returning. If the condition is not meet within the max attempt window an error will be returned.

func (*ECS) WaitUntilTasksStoppedWithContext ¶

func (c *ECS) WaitUntilTasksStoppedWithContext(ctx aws.Context, input *DescribeTasksInput, opts ...request.WaiterOption) error

WaitUntilTasksStoppedWithContext is an extended version of WaitUntilTasksStopped. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type Failure ¶

A failed resource. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Failure

type Failure struct {

    // The Amazon Resource Name (ARN) of the failed resource.
    Arn *string `locationName:"arn" type:"string"`

    // The reason for the failure.
    Reason *string `locationName:"reason" type:"string"`
    // contains filtered or unexported fields
}

func (Failure) GoString ¶

func (s Failure) GoString() string

GoString returns the string representation

func (*Failure) SetArn ¶

func (s *Failure) SetArn(v string) *Failure

SetArn sets the Arn field's value.

func (*Failure) SetReason ¶

func (s *Failure) SetReason(v string) *Failure

SetReason sets the Reason field's value.

func (Failure) String ¶

func (s Failure) String() string

String returns the string representation

type HostEntry ¶

Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/HostEntry

type HostEntry struct {

    // The hostname to use in the /etc/hosts entry.
    //
    // Hostname is a required field
    Hostname *string `locationName:"hostname" type:"string" required:"true"`

    // The IP address to use in the /etc/hosts entry.
    //
    // IpAddress is a required field
    IpAddress *string `locationName:"ipAddress" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (HostEntry) GoString ¶

func (s HostEntry) GoString() string

GoString returns the string representation

func (*HostEntry) SetHostname ¶

func (s *HostEntry) SetHostname(v string) *HostEntry

SetHostname sets the Hostname field's value.

func (*HostEntry) SetIpAddress ¶

func (s *HostEntry) SetIpAddress(v string) *HostEntry

SetIpAddress sets the IpAddress field's value.

func (HostEntry) String ¶

func (s HostEntry) String() string

String returns the string representation

func (*HostEntry) Validate ¶

func (s *HostEntry) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type HostVolumeProperties ¶

Details on a container instance host volume. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/HostVolumeProperties

type HostVolumeProperties struct {

    // The path on the host container instance that is presented to the container.
    // If this parameter is empty, then the Docker daemon has assigned a host path
    // for you. If the host parameter contains a sourcePath file location, then
    // the data volume persists at the specified location on the host container
    // instance until you delete it manually. If the sourcePath value does not exist
    // on the host container instance, the Docker daemon creates it. If the location
    // does exist, the contents of the source path folder are exported.
    SourcePath *string `locationName:"sourcePath" type:"string"`
    // contains filtered or unexported fields
}

func (HostVolumeProperties) GoString ¶

func (s HostVolumeProperties) GoString() string

GoString returns the string representation

func (*HostVolumeProperties) SetSourcePath ¶

func (s *HostVolumeProperties) SetSourcePath(v string) *HostVolumeProperties

SetSourcePath sets the SourcePath field's value.

func (HostVolumeProperties) String ¶

func (s HostVolumeProperties) String() string

String returns the string representation

type KeyValuePair ¶

A key and value pair object. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/KeyValuePair

type KeyValuePair struct {

    // The name of the key value pair. For environment variables, this is the name
    // of the environment variable.
    Name *string `locationName:"name" type:"string"`

    // The value of the key value pair. For environment variables, this is the value
    // of the environment variable.
    Value *string `locationName:"value" type:"string"`
    // contains filtered or unexported fields
}

func (KeyValuePair) GoString ¶

func (s KeyValuePair) GoString() string

GoString returns the string representation

func (*KeyValuePair) SetName ¶

func (s *KeyValuePair) SetName(v string) *KeyValuePair

SetName sets the Name field's value.

func (*KeyValuePair) SetValue ¶

func (s *KeyValuePair) SetValue(v string) *KeyValuePair

SetValue sets the Value field's value.

func (KeyValuePair) String ¶

func (s KeyValuePair) String() string

String returns the string representation

type ListAttributesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListAttributesRequest

type ListAttributesInput struct {

    // The name of the attribute with which to filter the results.
    AttributeName *string `locationName:"attributeName" type:"string"`

    // The value of the attribute with which to filter results. You must also specify
    // an attribute name to use this parameter.
    AttributeValue *string `locationName:"attributeValue" type:"string"`

    // The short name or full Amazon Resource Name (ARN) of the cluster to list
    // attributes. If you do not specify a cluster, the default cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The maximum number of cluster results returned by ListAttributes in paginated
    // output. When this parameter is used, ListAttributes only returns maxResults
    // results in a single page along with a nextToken response element. The remaining
    // results of the initial request can be seen by sending another ListAttributes
    // request with the returned nextToken value. This value can be between 1 and
    // 100. If this parameter is not used, then ListAttributes returns up to 100
    // results and a nextToken value if applicable.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated ListAttributes request
    // where maxResults was used and the results exceeded the value of that parameter.
    // Pagination continues from the end of the previous results that returned the
    // nextToken value. This value is null when there are no more results to return.
    //
    // This token should be treated as an opaque identifier that is only used to
    // retrieve the next items in a list and not for other programmatic purposes.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The type of the target with which to list attributes.
    //
    // TargetType is a required field
    TargetType *string `locationName:"targetType" type:"string" required:"true" enum:"TargetType"`
    // contains filtered or unexported fields
}

func (ListAttributesInput) GoString ¶

func (s ListAttributesInput) GoString() string

GoString returns the string representation

func (*ListAttributesInput) SetAttributeName ¶

func (s *ListAttributesInput) SetAttributeName(v string) *ListAttributesInput

SetAttributeName sets the AttributeName field's value.

func (*ListAttributesInput) SetAttributeValue ¶

func (s *ListAttributesInput) SetAttributeValue(v string) *ListAttributesInput

SetAttributeValue sets the AttributeValue field's value.

func (*ListAttributesInput) SetCluster ¶

func (s *ListAttributesInput) SetCluster(v string) *ListAttributesInput

SetCluster sets the Cluster field's value.

func (*ListAttributesInput) SetMaxResults ¶

func (s *ListAttributesInput) SetMaxResults(v int64) *ListAttributesInput

SetMaxResults sets the MaxResults field's value.

func (*ListAttributesInput) SetNextToken ¶

func (s *ListAttributesInput) SetNextToken(v string) *ListAttributesInput

SetNextToken sets the NextToken field's value.

func (*ListAttributesInput) SetTargetType ¶

func (s *ListAttributesInput) SetTargetType(v string) *ListAttributesInput

SetTargetType sets the TargetType field's value.

func (ListAttributesInput) String ¶

func (s ListAttributesInput) String() string

String returns the string representation

func (*ListAttributesInput) Validate ¶

func (s *ListAttributesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListAttributesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListAttributesResponse

type ListAttributesOutput struct {

    // A list of attribute objects that meet the criteria of the request.
    Attributes []*Attribute `locationName:"attributes" type:"list"`

    // The nextToken value to include in a future ListAttributes request. When the
    // results of a ListAttributes request exceed maxResults, this value can be
    // used to retrieve the next page of results. This value is null when there
    // are no more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListAttributesOutput) GoString ¶

func (s ListAttributesOutput) GoString() string

GoString returns the string representation

func (*ListAttributesOutput) SetAttributes ¶

func (s *ListAttributesOutput) SetAttributes(v []*Attribute) *ListAttributesOutput

SetAttributes sets the Attributes field's value.

func (*ListAttributesOutput) SetNextToken ¶

func (s *ListAttributesOutput) SetNextToken(v string) *ListAttributesOutput

SetNextToken sets the NextToken field's value.

func (ListAttributesOutput) String ¶

func (s ListAttributesOutput) String() string

String returns the string representation

type ListClustersInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListClustersRequest

type ListClustersInput struct {

    // The maximum number of cluster results returned by ListClusters in paginated
    // output. When this parameter is used, ListClusters only returns maxResults
    // results in a single page along with a nextToken response element. The remaining
    // results of the initial request can be seen by sending another ListClusters
    // request with the returned nextToken value. This value can be between 1 and
    // 100. If this parameter is not used, then ListClusters returns up to 100 results
    // and a nextToken value if applicable.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated ListClusters request
    // where maxResults was used and the results exceeded the value of that parameter.
    // Pagination continues from the end of the previous results that returned the
    // nextToken value. This value is null when there are no more results to return.
    //
    // This token should be treated as an opaque identifier that is only used to
    // retrieve the next items in a list and not for other programmatic purposes.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListClustersInput) GoString ¶

func (s ListClustersInput) GoString() string

GoString returns the string representation

func (*ListClustersInput) SetMaxResults ¶

func (s *ListClustersInput) SetMaxResults(v int64) *ListClustersInput

SetMaxResults sets the MaxResults field's value.

func (*ListClustersInput) SetNextToken ¶

func (s *ListClustersInput) SetNextToken(v string) *ListClustersInput

SetNextToken sets the NextToken field's value.

func (ListClustersInput) String ¶

func (s ListClustersInput) String() string

String returns the string representation

type ListClustersOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListClustersResponse

type ListClustersOutput struct {

    // The list of full Amazon Resource Name (ARN) entries for each cluster associated
    // with your account.
    ClusterArns []*string `locationName:"clusterArns" type:"list"`

    // The nextToken value to include in a future ListClusters request. When the
    // results of a ListClusters request exceed maxResults, this value can be used
    // to retrieve the next page of results. This value is null when there are no
    // more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListClustersOutput) GoString ¶

func (s ListClustersOutput) GoString() string

GoString returns the string representation

func (*ListClustersOutput) SetClusterArns ¶

func (s *ListClustersOutput) SetClusterArns(v []*string) *ListClustersOutput

SetClusterArns sets the ClusterArns field's value.

func (*ListClustersOutput) SetNextToken ¶

func (s *ListClustersOutput) SetNextToken(v string) *ListClustersOutput

SetNextToken sets the NextToken field's value.

func (ListClustersOutput) String ¶

func (s ListClustersOutput) String() string

String returns the string representation

type ListContainerInstancesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListContainerInstancesRequest

type ListContainerInstancesInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the container instances to list. If you do not specify a cluster, the default
    // cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // You can filter the results of a ListContainerInstances operation with cluster
    // query language statements. For more information, see Cluster Query Language
    // (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/cluster-query-language.html)
    // in the Amazon EC2 Container Service Developer Guide.
    Filter *string `locationName:"filter" type:"string"`

    // The maximum number of container instance results returned by ListContainerInstances
    // in paginated output. When this parameter is used, ListContainerInstances
    // only returns maxResults results in a single page along with a nextToken response
    // element. The remaining results of the initial request can be seen by sending
    // another ListContainerInstances request with the returned nextToken value.
    // This value can be between 1 and 100. If this parameter is not used, then
    // ListContainerInstances returns up to 100 results and a nextToken value if
    // applicable.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated ListContainerInstances
    // request where maxResults was used and the results exceeded the value of that
    // parameter. Pagination continues from the end of the previous results that
    // returned the nextToken value. This value is null when there are no more results
    // to return.
    //
    // This token should be treated as an opaque identifier that is only used to
    // retrieve the next items in a list and not for other programmatic purposes.
    NextToken *string `locationName:"nextToken" type:"string"`

    // Filters the container instances by status. For example, if you specify the
    // DRAINING status, the results include only container instances that have been
    // set to DRAINING using UpdateContainerInstancesState. If you do not specify
    // this parameter, the default is to include container instances set to ACTIVE
    // and DRAINING.
    Status *string `locationName:"status" type:"string" enum:"ContainerInstanceStatus"`
    // contains filtered or unexported fields
}

func (ListContainerInstancesInput) GoString ¶

func (s ListContainerInstancesInput) GoString() string

GoString returns the string representation

func (*ListContainerInstancesInput) SetCluster ¶

func (s *ListContainerInstancesInput) SetCluster(v string) *ListContainerInstancesInput

SetCluster sets the Cluster field's value.

func (*ListContainerInstancesInput) SetFilter ¶

func (s *ListContainerInstancesInput) SetFilter(v string) *ListContainerInstancesInput

SetFilter sets the Filter field's value.

func (*ListContainerInstancesInput) SetMaxResults ¶

func (s *ListContainerInstancesInput) SetMaxResults(v int64) *ListContainerInstancesInput

SetMaxResults sets the MaxResults field's value.

func (*ListContainerInstancesInput) SetNextToken ¶

func (s *ListContainerInstancesInput) SetNextToken(v string) *ListContainerInstancesInput

SetNextToken sets the NextToken field's value.

func (*ListContainerInstancesInput) SetStatus ¶

func (s *ListContainerInstancesInput) SetStatus(v string) *ListContainerInstancesInput

SetStatus sets the Status field's value.

func (ListContainerInstancesInput) String ¶

func (s ListContainerInstancesInput) String() string

String returns the string representation

type ListContainerInstancesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListContainerInstancesResponse

type ListContainerInstancesOutput struct {

    // The list of container instances with full Amazon Resource Name (ARN) entries
    // for each container instance associated with the specified cluster.
    ContainerInstanceArns []*string `locationName:"containerInstanceArns" type:"list"`

    // The nextToken value to include in a future ListContainerInstances request.
    // When the results of a ListContainerInstances request exceed maxResults, this
    // value can be used to retrieve the next page of results. This value is null
    // when there are no more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListContainerInstancesOutput) GoString ¶

func (s ListContainerInstancesOutput) GoString() string

GoString returns the string representation

func (*ListContainerInstancesOutput) SetContainerInstanceArns ¶

func (s *ListContainerInstancesOutput) SetContainerInstanceArns(v []*string) *ListContainerInstancesOutput

SetContainerInstanceArns sets the ContainerInstanceArns field's value.

func (*ListContainerInstancesOutput) SetNextToken ¶

func (s *ListContainerInstancesOutput) SetNextToken(v string) *ListContainerInstancesOutput

SetNextToken sets the NextToken field's value.

func (ListContainerInstancesOutput) String ¶

func (s ListContainerInstancesOutput) String() string

String returns the string representation

type ListServicesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListServicesRequest

type ListServicesInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the services to list. If you do not specify a cluster, the default cluster
    // is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The maximum number of container instance results returned by ListServices
    // in paginated output. When this parameter is used, ListServices only returns
    // maxResults results in a single page along with a nextToken response element.
    // The remaining results of the initial request can be seen by sending another
    // ListServices request with the returned nextToken value. This value can be
    // between 1 and 10. If this parameter is not used, then ListServices returns
    // up to 10 results and a nextToken value if applicable.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated ListServices request
    // where maxResults was used and the results exceeded the value of that parameter.
    // Pagination continues from the end of the previous results that returned the
    // nextToken value. This value is null when there are no more results to return.
    //
    // This token should be treated as an opaque identifier that is only used to
    // retrieve the next items in a list and not for other programmatic purposes.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListServicesInput) GoString ¶

func (s ListServicesInput) GoString() string

GoString returns the string representation

func (*ListServicesInput) SetCluster ¶

func (s *ListServicesInput) SetCluster(v string) *ListServicesInput

SetCluster sets the Cluster field's value.

func (*ListServicesInput) SetMaxResults ¶

func (s *ListServicesInput) SetMaxResults(v int64) *ListServicesInput

SetMaxResults sets the MaxResults field's value.

func (*ListServicesInput) SetNextToken ¶

func (s *ListServicesInput) SetNextToken(v string) *ListServicesInput

SetNextToken sets the NextToken field's value.

func (ListServicesInput) String ¶

func (s ListServicesInput) String() string

String returns the string representation

type ListServicesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListServicesResponse

type ListServicesOutput struct {

    // The nextToken value to include in a future ListServices request. When the
    // results of a ListServices request exceed maxResults, this value can be used
    // to retrieve the next page of results. This value is null when there are no
    // more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The list of full Amazon Resource Name (ARN) entries for each service associated
    // with the specified cluster.
    ServiceArns []*string `locationName:"serviceArns" type:"list"`
    // contains filtered or unexported fields
}

func (ListServicesOutput) GoString ¶

func (s ListServicesOutput) GoString() string

GoString returns the string representation

func (*ListServicesOutput) SetNextToken ¶

func (s *ListServicesOutput) SetNextToken(v string) *ListServicesOutput

SetNextToken sets the NextToken field's value.

func (*ListServicesOutput) SetServiceArns ¶

func (s *ListServicesOutput) SetServiceArns(v []*string) *ListServicesOutput

SetServiceArns sets the ServiceArns field's value.

func (ListServicesOutput) String ¶

func (s ListServicesOutput) String() string

String returns the string representation

type ListTaskDefinitionFamiliesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitionFamiliesRequest

type ListTaskDefinitionFamiliesInput struct {

    // The familyPrefix is a string that is used to filter the results of ListTaskDefinitionFamilies.
    // If you specify a familyPrefix, only task definition family names that begin
    // with the familyPrefix string are returned.
    FamilyPrefix *string `locationName:"familyPrefix" type:"string"`

    // The maximum number of task definition family results returned by ListTaskDefinitionFamilies
    // in paginated output. When this parameter is used, ListTaskDefinitions only
    // returns maxResults results in a single page along with a nextToken response
    // element. The remaining results of the initial request can be seen by sending
    // another ListTaskDefinitionFamilies request with the returned nextToken value.
    // This value can be between 1 and 100. If this parameter is not used, then
    // ListTaskDefinitionFamilies returns up to 100 results and a nextToken value
    // if applicable.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated ListTaskDefinitionFamilies
    // request where maxResults was used and the results exceeded the value of that
    // parameter. Pagination continues from the end of the previous results that
    // returned the nextToken value. This value is null when there are no more results
    // to return.
    //
    // This token should be treated as an opaque identifier that is only used to
    // retrieve the next items in a list and not for other programmatic purposes.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The task definition family status with which to filter the ListTaskDefinitionFamilies
    // results. By default, both ACTIVE and INACTIVE task definition families are
    // listed. If this parameter is set to ACTIVE, only task definition families
    // that have an ACTIVE task definition revision are returned. If this parameter
    // is set to INACTIVE, only task definition families that do not have any ACTIVE
    // task definition revisions are returned. If you paginate the resulting output,
    // be sure to keep the status value constant in each subsequent request.
    Status *string `locationName:"status" type:"string" enum:"TaskDefinitionFamilyStatus"`
    // contains filtered or unexported fields
}

func (ListTaskDefinitionFamiliesInput) GoString ¶

func (s ListTaskDefinitionFamiliesInput) GoString() string

GoString returns the string representation

func (*ListTaskDefinitionFamiliesInput) SetFamilyPrefix ¶

func (s *ListTaskDefinitionFamiliesInput) SetFamilyPrefix(v string) *ListTaskDefinitionFamiliesInput

SetFamilyPrefix sets the FamilyPrefix field's value.

func (*ListTaskDefinitionFamiliesInput) SetMaxResults ¶

func (s *ListTaskDefinitionFamiliesInput) SetMaxResults(v int64) *ListTaskDefinitionFamiliesInput

SetMaxResults sets the MaxResults field's value.

func (*ListTaskDefinitionFamiliesInput) SetNextToken ¶

func (s *ListTaskDefinitionFamiliesInput) SetNextToken(v string) *ListTaskDefinitionFamiliesInput

SetNextToken sets the NextToken field's value.

func (*ListTaskDefinitionFamiliesInput) SetStatus ¶

func (s *ListTaskDefinitionFamiliesInput) SetStatus(v string) *ListTaskDefinitionFamiliesInput

SetStatus sets the Status field's value.

func (ListTaskDefinitionFamiliesInput) String ¶

func (s ListTaskDefinitionFamiliesInput) String() string

String returns the string representation

type ListTaskDefinitionFamiliesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitionFamiliesResponse

type ListTaskDefinitionFamiliesOutput struct {

    // The list of task definition family names that match the ListTaskDefinitionFamilies
    // request.
    Families []*string `locationName:"families" type:"list"`

    // The nextToken value to include in a future ListTaskDefinitionFamilies request.
    // When the results of a ListTaskDefinitionFamilies request exceed maxResults,
    // this value can be used to retrieve the next page of results. This value is
    // null when there are no more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListTaskDefinitionFamiliesOutput) GoString ¶

func (s ListTaskDefinitionFamiliesOutput) GoString() string

GoString returns the string representation

func (*ListTaskDefinitionFamiliesOutput) SetFamilies ¶

func (s *ListTaskDefinitionFamiliesOutput) SetFamilies(v []*string) *ListTaskDefinitionFamiliesOutput

SetFamilies sets the Families field's value.

func (*ListTaskDefinitionFamiliesOutput) SetNextToken ¶

func (s *ListTaskDefinitionFamiliesOutput) SetNextToken(v string) *ListTaskDefinitionFamiliesOutput

SetNextToken sets the NextToken field's value.

func (ListTaskDefinitionFamiliesOutput) String ¶

func (s ListTaskDefinitionFamiliesOutput) String() string

String returns the string representation

type ListTaskDefinitionsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitionsRequest

type ListTaskDefinitionsInput struct {

    // The full family name with which to filter the ListTaskDefinitions results.
    // Specifying a familyPrefix limits the listed task definitions to task definition
    // revisions that belong to that family.
    FamilyPrefix *string `locationName:"familyPrefix" type:"string"`

    // The maximum number of task definition results returned by ListTaskDefinitions
    // in paginated output. When this parameter is used, ListTaskDefinitions only
    // returns maxResults results in a single page along with a nextToken response
    // element. The remaining results of the initial request can be seen by sending
    // another ListTaskDefinitions request with the returned nextToken value. This
    // value can be between 1 and 100. If this parameter is not used, then ListTaskDefinitions
    // returns up to 100 results and a nextToken value if applicable.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated ListTaskDefinitions
    // request where maxResults was used and the results exceeded the value of that
    // parameter. Pagination continues from the end of the previous results that
    // returned the nextToken value. This value is null when there are no more results
    // to return.
    //
    // This token should be treated as an opaque identifier that is only used to
    // retrieve the next items in a list and not for other programmatic purposes.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The order in which to sort the results. Valid values are ASC and DESC. By
    // default (ASC), task definitions are listed lexicographically by family name
    // and in ascending numerical order by revision so that the newest task definitions
    // in a family are listed last. Setting this parameter to DESC reverses the
    // sort order on family name and revision so that the newest task definitions
    // in a family are listed first.
    Sort *string `locationName:"sort" type:"string" enum:"SortOrder"`

    // The task definition status with which to filter the ListTaskDefinitions results.
    // By default, only ACTIVE task definitions are listed. By setting this parameter
    // to INACTIVE, you can view task definitions that are INACTIVE as long as an
    // active task or service still references them. If you paginate the resulting
    // output, be sure to keep the status value constant in each subsequent request.
    Status *string `locationName:"status" type:"string" enum:"TaskDefinitionStatus"`
    // contains filtered or unexported fields
}

func (ListTaskDefinitionsInput) GoString ¶

func (s ListTaskDefinitionsInput) GoString() string

GoString returns the string representation

func (*ListTaskDefinitionsInput) SetFamilyPrefix ¶

func (s *ListTaskDefinitionsInput) SetFamilyPrefix(v string) *ListTaskDefinitionsInput

SetFamilyPrefix sets the FamilyPrefix field's value.

func (*ListTaskDefinitionsInput) SetMaxResults ¶

func (s *ListTaskDefinitionsInput) SetMaxResults(v int64) *ListTaskDefinitionsInput

SetMaxResults sets the MaxResults field's value.

func (*ListTaskDefinitionsInput) SetNextToken ¶

func (s *ListTaskDefinitionsInput) SetNextToken(v string) *ListTaskDefinitionsInput

SetNextToken sets the NextToken field's value.

func (*ListTaskDefinitionsInput) SetSort ¶

func (s *ListTaskDefinitionsInput) SetSort(v string) *ListTaskDefinitionsInput

SetSort sets the Sort field's value.

func (*ListTaskDefinitionsInput) SetStatus ¶

func (s *ListTaskDefinitionsInput) SetStatus(v string) *ListTaskDefinitionsInput

SetStatus sets the Status field's value.

func (ListTaskDefinitionsInput) String ¶

func (s ListTaskDefinitionsInput) String() string

String returns the string representation

type ListTaskDefinitionsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTaskDefinitionsResponse

type ListTaskDefinitionsOutput struct {

    // The nextToken value to include in a future ListTaskDefinitions request. When
    // the results of a ListTaskDefinitions request exceed maxResults, this value
    // can be used to retrieve the next page of results. This value is null when
    // there are no more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The list of task definition Amazon Resource Name (ARN) entries for the ListTaskDefinitions
    // request.
    TaskDefinitionArns []*string `locationName:"taskDefinitionArns" type:"list"`
    // contains filtered or unexported fields
}

func (ListTaskDefinitionsOutput) GoString ¶

func (s ListTaskDefinitionsOutput) GoString() string

GoString returns the string representation

func (*ListTaskDefinitionsOutput) SetNextToken ¶

func (s *ListTaskDefinitionsOutput) SetNextToken(v string) *ListTaskDefinitionsOutput

SetNextToken sets the NextToken field's value.

func (*ListTaskDefinitionsOutput) SetTaskDefinitionArns ¶

func (s *ListTaskDefinitionsOutput) SetTaskDefinitionArns(v []*string) *ListTaskDefinitionsOutput

SetTaskDefinitionArns sets the TaskDefinitionArns field's value.

func (ListTaskDefinitionsOutput) String ¶

func (s ListTaskDefinitionsOutput) String() string

String returns the string representation

type ListTasksInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTasksRequest

type ListTasksInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the tasks to list. If you do not specify a cluster, the default cluster is
    // assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The container instance ID or full Amazon Resource Name (ARN) of the container
    // instance with which to filter the ListTasks results. Specifying a containerInstance
    // limits the results to tasks that belong to that container instance.
    ContainerInstance *string `locationName:"containerInstance" type:"string"`

    // The task desired status with which to filter the ListTasks results. Specifying
    // a desiredStatus of STOPPED limits the results to tasks that ECS has set the
    // desired status to STOPPED, which can be useful for debugging tasks that are
    // not starting properly or have died or finished. The default status filter
    // is RUNNING, which shows tasks that ECS has set the desired status to RUNNING.
    //
    // Although you can filter results based on a desired status of PENDING, this
    // will not return any results because ECS never sets the desired status of
    // a task to that value (only a task's lastStatus may have a value of PENDING).
    DesiredStatus *string `locationName:"desiredStatus" type:"string" enum:"DesiredStatus"`

    // The name of the family with which to filter the ListTasks results. Specifying
    // a family limits the results to tasks that belong to that family.
    Family *string `locationName:"family" type:"string"`

    // The maximum number of task results returned by ListTasks in paginated output.
    // When this parameter is used, ListTasks only returns maxResults results in
    // a single page along with a nextToken response element. The remaining results
    // of the initial request can be seen by sending another ListTasks request with
    // the returned nextToken value. This value can be between 1 and 100. If this
    // parameter is not used, then ListTasks returns up to 100 results and a nextToken
    // value if applicable.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated ListTasks request
    // where maxResults was used and the results exceeded the value of that parameter.
    // Pagination continues from the end of the previous results that returned the
    // nextToken value. This value is null when there are no more results to return.
    //
    // This token should be treated as an opaque identifier that is only used to
    // retrieve the next items in a list and not for other programmatic purposes.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The name of the service with which to filter the ListTasks results. Specifying
    // a serviceName limits the results to tasks that belong to that service.
    ServiceName *string `locationName:"serviceName" type:"string"`

    // The startedBy value with which to filter the task results. Specifying a startedBy
    // value limits the results to tasks that were started with that value.
    StartedBy *string `locationName:"startedBy" type:"string"`
    // contains filtered or unexported fields
}

func (ListTasksInput) GoString ¶

func (s ListTasksInput) GoString() string

GoString returns the string representation

func (*ListTasksInput) SetCluster ¶

func (s *ListTasksInput) SetCluster(v string) *ListTasksInput

SetCluster sets the Cluster field's value.

func (*ListTasksInput) SetContainerInstance ¶

func (s *ListTasksInput) SetContainerInstance(v string) *ListTasksInput

SetContainerInstance sets the ContainerInstance field's value.

func (*ListTasksInput) SetDesiredStatus ¶

func (s *ListTasksInput) SetDesiredStatus(v string) *ListTasksInput

SetDesiredStatus sets the DesiredStatus field's value.

func (*ListTasksInput) SetFamily ¶

func (s *ListTasksInput) SetFamily(v string) *ListTasksInput

SetFamily sets the Family field's value.

func (*ListTasksInput) SetMaxResults ¶

func (s *ListTasksInput) SetMaxResults(v int64) *ListTasksInput

SetMaxResults sets the MaxResults field's value.

func (*ListTasksInput) SetNextToken ¶

func (s *ListTasksInput) SetNextToken(v string) *ListTasksInput

SetNextToken sets the NextToken field's value.

func (*ListTasksInput) SetServiceName ¶

func (s *ListTasksInput) SetServiceName(v string) *ListTasksInput

SetServiceName sets the ServiceName field's value.

func (*ListTasksInput) SetStartedBy ¶

func (s *ListTasksInput) SetStartedBy(v string) *ListTasksInput

SetStartedBy sets the StartedBy field's value.

func (ListTasksInput) String ¶

func (s ListTasksInput) String() string

String returns the string representation

type ListTasksOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ListTasksResponse

type ListTasksOutput struct {

    // The nextToken value to include in a future ListTasks request. When the results
    // of a ListTasks request exceed maxResults, this value can be used to retrieve
    // the next page of results. This value is null when there are no more results
    // to return.
    NextToken *string `locationName:"nextToken" type:"string"`

    // The list of task Amazon Resource Name (ARN) entries for the ListTasks request.
    TaskArns []*string `locationName:"taskArns" type:"list"`
    // contains filtered or unexported fields
}

func (ListTasksOutput) GoString ¶

func (s ListTasksOutput) GoString() string

GoString returns the string representation

func (*ListTasksOutput) SetNextToken ¶

func (s *ListTasksOutput) SetNextToken(v string) *ListTasksOutput

SetNextToken sets the NextToken field's value.

func (*ListTasksOutput) SetTaskArns ¶

func (s *ListTasksOutput) SetTaskArns(v []*string) *ListTasksOutput

SetTaskArns sets the TaskArns field's value.

func (ListTasksOutput) String ¶

func (s ListTasksOutput) String() string

String returns the string representation

type LoadBalancer ¶

Details on a load balancer that is used with a service. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/LoadBalancer

type LoadBalancer struct {

    // The name of the container (as it appears in a container definition) to associate
    // with the load balancer.
    ContainerName *string `locationName:"containerName" type:"string"`

    // The port on the container to associate with the load balancer. This port
    // must correspond to a containerPort in the service's task definition. Your
    // container instances must allow ingress traffic on the hostPort of the port
    // mapping.
    ContainerPort *int64 `locationName:"containerPort" type:"integer"`

    // The name of a Classic load balancer.
    LoadBalancerName *string `locationName:"loadBalancerName" type:"string"`

    // The full Amazon Resource Name (ARN) of the Elastic Load Balancing target
    // group associated with a service.
    TargetGroupArn *string `locationName:"targetGroupArn" type:"string"`
    // contains filtered or unexported fields
}

func (LoadBalancer) GoString ¶

func (s LoadBalancer) GoString() string

GoString returns the string representation

func (*LoadBalancer) SetContainerName ¶

func (s *LoadBalancer) SetContainerName(v string) *LoadBalancer

SetContainerName sets the ContainerName field's value.

func (*LoadBalancer) SetContainerPort ¶

func (s *LoadBalancer) SetContainerPort(v int64) *LoadBalancer

SetContainerPort sets the ContainerPort field's value.

func (*LoadBalancer) SetLoadBalancerName ¶

func (s *LoadBalancer) SetLoadBalancerName(v string) *LoadBalancer

SetLoadBalancerName sets the LoadBalancerName field's value.

func (*LoadBalancer) SetTargetGroupArn ¶

func (s *LoadBalancer) SetTargetGroupArn(v string) *LoadBalancer

SetTargetGroupArn sets the TargetGroupArn field's value.

func (LoadBalancer) String ¶

func (s LoadBalancer) String() string

String returns the string representation

type LogConfiguration ¶

Log configuration options to send to a custom log driver for the container. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/LogConfiguration

type LogConfiguration struct {

    // The log driver to use for the container. The valid values listed for this
    // parameter are log drivers that the Amazon ECS container agent can communicate
    // with by default.
    //
    // If you have a custom driver that is not listed above that you would like
    // to work with the Amazon ECS container agent, you can fork the Amazon ECS
    // container agent project that is available on GitHub (https://github.com/aws/amazon-ecs-agent)
    // and customize it to work with that driver. We encourage you to submit pull
    // requests for changes that you would like to have included. However, Amazon
    // Web Services does not currently provide support for running modified copies
    // of this software.
    //
    // This parameter requires version 1.18 of the Docker Remote API or greater
    // on your container instance. To check the Docker Remote API version on your
    // container instance, log into your container instance and run the following
    // command: sudo docker version | grep "Server API version"
    //
    // LogDriver is a required field
    LogDriver *string `locationName:"logDriver" type:"string" required:"true" enum:"LogDriver"`

    // The configuration options to send to the log driver. This parameter requires
    // version 1.19 of the Docker Remote API or greater on your container instance.
    // To check the Docker Remote API version on your container instance, log into
    // your container instance and run the following command: sudo docker version
    // | grep "Server API version"
    Options map[string]*string `locationName:"options" type:"map"`
    // contains filtered or unexported fields
}

func (LogConfiguration) GoString ¶

func (s LogConfiguration) GoString() string

GoString returns the string representation

func (*LogConfiguration) SetLogDriver ¶

func (s *LogConfiguration) SetLogDriver(v string) *LogConfiguration

SetLogDriver sets the LogDriver field's value.

func (*LogConfiguration) SetOptions ¶

func (s *LogConfiguration) SetOptions(v map[string]*string) *LogConfiguration

SetOptions sets the Options field's value.

func (LogConfiguration) String ¶

func (s LogConfiguration) String() string

String returns the string representation

func (*LogConfiguration) Validate ¶

func (s *LogConfiguration) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type MountPoint ¶

Details on a volume mount point that is used in a container definition. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/MountPoint

type MountPoint struct {

    // The path on the container to mount the host volume at.
    ContainerPath *string `locationName:"containerPath" type:"string"`

    // If this value is true, the container has read-only access to the volume.
    // If this value is false, then the container can write to the volume. The default
    // value is false.
    ReadOnly *bool `locationName:"readOnly" type:"boolean"`

    // The name of the volume to mount.
    SourceVolume *string `locationName:"sourceVolume" type:"string"`
    // contains filtered or unexported fields
}

func (MountPoint) GoString ¶

func (s MountPoint) GoString() string

GoString returns the string representation

func (*MountPoint) SetContainerPath ¶

func (s *MountPoint) SetContainerPath(v string) *MountPoint

SetContainerPath sets the ContainerPath field's value.

func (*MountPoint) SetReadOnly ¶

func (s *MountPoint) SetReadOnly(v bool) *MountPoint

SetReadOnly sets the ReadOnly field's value.

func (*MountPoint) SetSourceVolume ¶

func (s *MountPoint) SetSourceVolume(v string) *MountPoint

SetSourceVolume sets the SourceVolume field's value.

func (MountPoint) String ¶

func (s MountPoint) String() string

String returns the string representation

type NetworkBinding ¶

Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/NetworkBinding

type NetworkBinding struct {

    // The IP address that the container is bound to on the container instance.
    BindIP *string `locationName:"bindIP" type:"string"`

    // The port number on the container that is be used with the network binding.
    ContainerPort *int64 `locationName:"containerPort" type:"integer"`

    // The port number on the host that is used with the network binding.
    HostPort *int64 `locationName:"hostPort" type:"integer"`

    // The protocol used for the network binding.
    Protocol *string `locationName:"protocol" type:"string" enum:"TransportProtocol"`
    // contains filtered or unexported fields
}

func (NetworkBinding) GoString ¶

func (s NetworkBinding) GoString() string

GoString returns the string representation

func (*NetworkBinding) SetBindIP ¶

func (s *NetworkBinding) SetBindIP(v string) *NetworkBinding

SetBindIP sets the BindIP field's value.

func (*NetworkBinding) SetContainerPort ¶

func (s *NetworkBinding) SetContainerPort(v int64) *NetworkBinding

SetContainerPort sets the ContainerPort field's value.

func (*NetworkBinding) SetHostPort ¶

func (s *NetworkBinding) SetHostPort(v int64) *NetworkBinding

SetHostPort sets the HostPort field's value.

func (*NetworkBinding) SetProtocol ¶

func (s *NetworkBinding) SetProtocol(v string) *NetworkBinding

SetProtocol sets the Protocol field's value.

func (NetworkBinding) String ¶

func (s NetworkBinding) String() string

String returns the string representation

type PlacementConstraint ¶

An object representing a constraint on task placement. For more information, see Task Placement Constraints (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html) in the Amazon EC2 Container Service Developer Guide. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/PlacementConstraint

type PlacementConstraint struct {

    // A cluster query language expression to apply to the constraint. Note you
    // cannot specify an expression if the constraint type is distinctInstance.
    // For more information, see Cluster Query Language (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/cluster-query-language.html)
    // in the Amazon EC2 Container Service Developer Guide.
    Expression *string `locationName:"expression" type:"string"`

    // The type of constraint. Use distinctInstance to ensure that each task in
    // a particular group is running on a different container instance. Use memberOf
    // to restrict selection to a group of valid candidates. Note that distinctInstance
    // is not supported in task definitions.
    Type *string `locationName:"type" type:"string" enum:"PlacementConstraintType"`
    // contains filtered or unexported fields
}

func (PlacementConstraint) GoString ¶

func (s PlacementConstraint) GoString() string

GoString returns the string representation

func (*PlacementConstraint) SetExpression ¶

func (s *PlacementConstraint) SetExpression(v string) *PlacementConstraint

SetExpression sets the Expression field's value.

func (*PlacementConstraint) SetType ¶

func (s *PlacementConstraint) SetType(v string) *PlacementConstraint

SetType sets the Type field's value.

func (PlacementConstraint) String ¶

func (s PlacementConstraint) String() string

String returns the string representation

type PlacementStrategy ¶

The task placement strategy for a task or service. For more information, see Task Placement Strategies (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-strategies.html) in the Amazon EC2 Container Service Developer Guide. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/PlacementStrategy

type PlacementStrategy struct {

    // The field to apply the placement strategy against. For the spread placement
    // strategy, valid values are instanceId (or host, which has the same effect),
    // or any platform or custom attribute that is applied to a container instance,
    // such as attribute:ecs.availability-zone. For the binpack placement strategy,
    // valid values are cpu and memory. For the random placement strategy, this
    // field is not used.
    Field *string `locationName:"field" type:"string"`

    // The type of placement strategy. The random placement strategy randomly places
    // tasks on available candidates. The spread placement strategy spreads placement
    // across available candidates evenly based on the field parameter. The binpack
    // strategy places tasks on available candidates that have the least available
    // amount of the resource that is specified with the field parameter. For example,
    // if you binpack on memory, a task is placed on the instance with the least
    // amount of remaining memory (but still enough to run the task).
    Type *string `locationName:"type" type:"string" enum:"PlacementStrategyType"`
    // contains filtered or unexported fields
}

func (PlacementStrategy) GoString ¶

func (s PlacementStrategy) GoString() string

GoString returns the string representation

func (*PlacementStrategy) SetField ¶

func (s *PlacementStrategy) SetField(v string) *PlacementStrategy

SetField sets the Field field's value.

func (*PlacementStrategy) SetType ¶

func (s *PlacementStrategy) SetType(v string) *PlacementStrategy

SetType sets the Type field's value.

func (PlacementStrategy) String ¶

func (s PlacementStrategy) String() string

String returns the string representation

type PortMapping ¶

Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/PortMapping

type PortMapping struct {

    // The port number on the container that is bound to the user-specified or automatically
    // assigned host port. If you specify a container port and not a host port,
    // your container automatically receives a host port in the ephemeral port range
    // (for more information, see hostPort). Port mappings that are automatically
    // assigned in this way do not count toward the 100 reserved ports limit of
    // a container instance.
    ContainerPort *int64 `locationName:"containerPort" type:"integer"`

    // The port number on the container instance to reserve for your container.
    // You can specify a non-reserved host port for your container port mapping,
    // or you can omit the hostPort (or set it to 0) while specifying a containerPort
    // and your container automatically receives a port in the ephemeral port range
    // for your container instance operating system and Docker version.
    //
    // The default ephemeral port range for Docker version 1.6.0 and later is listed
    // on the instance under /proc/sys/net/ipv4/ip_local_port_range; if this kernel
    // parameter is unavailable, the default ephemeral port range of 49153 to 65535
    // is used. You should not attempt to specify a host port in the ephemeral port
    // range as these are reserved for automatic assignment. In general, ports below
    // 32768 are outside of the ephemeral port range.
    //
    // The default ephemeral port range of 49153 to 65535 will always be used for
    // Docker versions prior to 1.6.0.
    //
    // The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376,
    // and the Amazon ECS container agent ports 51678 and 51679. Any host port that
    // was previously specified in a running task is also reserved while the task
    // is running (after a task stops, the host port is released).The current reserved
    // ports are displayed in the remainingResources of DescribeContainerInstances
    // output, and a container instance may have up to 100 reserved ports at a time,
    // including the default reserved ports (automatically assigned ports do not
    // count toward the 100 reserved ports limit).
    HostPort *int64 `locationName:"hostPort" type:"integer"`

    // The protocol used for the port mapping. Valid values are tcp and udp. The
    // default is tcp.
    Protocol *string `locationName:"protocol" type:"string" enum:"TransportProtocol"`
    // contains filtered or unexported fields
}

func (PortMapping) GoString ¶

func (s PortMapping) GoString() string

GoString returns the string representation

func (*PortMapping) SetContainerPort ¶

func (s *PortMapping) SetContainerPort(v int64) *PortMapping

SetContainerPort sets the ContainerPort field's value.

func (*PortMapping) SetHostPort ¶

func (s *PortMapping) SetHostPort(v int64) *PortMapping

SetHostPort sets the HostPort field's value.

func (*PortMapping) SetProtocol ¶

func (s *PortMapping) SetProtocol(v string) *PortMapping

SetProtocol sets the Protocol field's value.

func (PortMapping) String ¶

func (s PortMapping) String() string

String returns the string representation

type PutAttributesInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/PutAttributesRequest

type PutAttributesInput struct {

    // The attributes to apply to your resource. You can specify up to 10 custom
    // attributes per resource. You can specify up to 10 attributes in a single
    // call.
    //
    // Attributes is a required field
    Attributes []*Attribute `locationName:"attributes" type:"list" required:"true"`

    // The short name or full Amazon Resource Name (ARN) of the cluster that contains
    // the resource to apply attributes. If you do not specify a cluster, the default
    // cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`
    // contains filtered or unexported fields
}

func (PutAttributesInput) GoString ¶

func (s PutAttributesInput) GoString() string

GoString returns the string representation

func (*PutAttributesInput) SetAttributes ¶

func (s *PutAttributesInput) SetAttributes(v []*Attribute) *PutAttributesInput

SetAttributes sets the Attributes field's value.

func (*PutAttributesInput) SetCluster ¶

func (s *PutAttributesInput) SetCluster(v string) *PutAttributesInput

SetCluster sets the Cluster field's value.

func (PutAttributesInput) String ¶

func (s PutAttributesInput) String() string

String returns the string representation

func (*PutAttributesInput) Validate ¶

func (s *PutAttributesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type PutAttributesOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/PutAttributesResponse

type PutAttributesOutput struct {

    // The attributes applied to your resource.
    Attributes []*Attribute `locationName:"attributes" type:"list"`
    // contains filtered or unexported fields
}

func (PutAttributesOutput) GoString ¶

func (s PutAttributesOutput) GoString() string

GoString returns the string representation

func (*PutAttributesOutput) SetAttributes ¶

func (s *PutAttributesOutput) SetAttributes(v []*Attribute) *PutAttributesOutput

SetAttributes sets the Attributes field's value.

func (PutAttributesOutput) String ¶

func (s PutAttributesOutput) String() string

String returns the string representation

type RegisterContainerInstanceInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterContainerInstanceRequest

type RegisterContainerInstanceInput struct {

    // The container instance attributes that this container instance supports.
    Attributes []*Attribute `locationName:"attributes" type:"list"`

    // The short name or full Amazon Resource Name (ARN) of the cluster with which
    // to register your container instance. If you do not specify a cluster, the
    // default cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The Amazon Resource Name (ARN) of the container instance (if it was previously
    // registered).
    ContainerInstanceArn *string `locationName:"containerInstanceArn" type:"string"`

    // The instance identity document for the EC2 instance to register. This document
    // can be found by running the following command from the instance: curl http://169.254.169.254/latest/dynamic/instance-identity/document/
    InstanceIdentityDocument *string `locationName:"instanceIdentityDocument" type:"string"`

    // The instance identity document signature for the EC2 instance to register.
    // This signature can be found by running the following command from the instance:
    // curl http://169.254.169.254/latest/dynamic/instance-identity/signature/
    InstanceIdentityDocumentSignature *string `locationName:"instanceIdentityDocumentSignature" type:"string"`

    // The resources available on the instance.
    TotalResources []*Resource `locationName:"totalResources" type:"list"`

    // The version information for the Amazon ECS container agent and Docker daemon
    // running on the container instance.
    VersionInfo *VersionInfo `locationName:"versionInfo" type:"structure"`
    // contains filtered or unexported fields
}

func (RegisterContainerInstanceInput) GoString ¶

func (s RegisterContainerInstanceInput) GoString() string

GoString returns the string representation

func (*RegisterContainerInstanceInput) SetAttributes ¶

func (s *RegisterContainerInstanceInput) SetAttributes(v []*Attribute) *RegisterContainerInstanceInput

SetAttributes sets the Attributes field's value.

func (*RegisterContainerInstanceInput) SetCluster ¶

func (s *RegisterContainerInstanceInput) SetCluster(v string) *RegisterContainerInstanceInput

SetCluster sets the Cluster field's value.

func (*RegisterContainerInstanceInput) SetContainerInstanceArn ¶

func (s *RegisterContainerInstanceInput) SetContainerInstanceArn(v string) *RegisterContainerInstanceInput

SetContainerInstanceArn sets the ContainerInstanceArn field's value.

func (*RegisterContainerInstanceInput) SetInstanceIdentityDocument ¶

func (s *RegisterContainerInstanceInput) SetInstanceIdentityDocument(v string) *RegisterContainerInstanceInput

SetInstanceIdentityDocument sets the InstanceIdentityDocument field's value.

func (*RegisterContainerInstanceInput) SetInstanceIdentityDocumentSignature ¶

func (s *RegisterContainerInstanceInput) SetInstanceIdentityDocumentSignature(v string) *RegisterContainerInstanceInput

SetInstanceIdentityDocumentSignature sets the InstanceIdentityDocumentSignature field's value.

func (*RegisterContainerInstanceInput) SetTotalResources ¶

func (s *RegisterContainerInstanceInput) SetTotalResources(v []*Resource) *RegisterContainerInstanceInput

SetTotalResources sets the TotalResources field's value.

func (*RegisterContainerInstanceInput) SetVersionInfo ¶

func (s *RegisterContainerInstanceInput) SetVersionInfo(v *VersionInfo) *RegisterContainerInstanceInput

SetVersionInfo sets the VersionInfo field's value.

func (RegisterContainerInstanceInput) String ¶

func (s RegisterContainerInstanceInput) String() string

String returns the string representation

func (*RegisterContainerInstanceInput) Validate ¶

func (s *RegisterContainerInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RegisterContainerInstanceOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterContainerInstanceResponse

type RegisterContainerInstanceOutput struct {

    // The container instance that was registered.
    ContainerInstance *ContainerInstance `locationName:"containerInstance" type:"structure"`
    // contains filtered or unexported fields
}

func (RegisterContainerInstanceOutput) GoString ¶

func (s RegisterContainerInstanceOutput) GoString() string

GoString returns the string representation

func (*RegisterContainerInstanceOutput) SetContainerInstance ¶

func (s *RegisterContainerInstanceOutput) SetContainerInstance(v *ContainerInstance) *RegisterContainerInstanceOutput

SetContainerInstance sets the ContainerInstance field's value.

func (RegisterContainerInstanceOutput) String ¶

func (s RegisterContainerInstanceOutput) String() string

String returns the string representation

type RegisterTaskDefinitionInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterTaskDefinitionRequest

type RegisterTaskDefinitionInput struct {

    // A list of container definitions in JSON format that describe the different
    // containers that make up your task.
    //
    // ContainerDefinitions is a required field
    ContainerDefinitions []*ContainerDefinition `locationName:"containerDefinitions" type:"list" required:"true"`

    // You must specify a family for a task definition, which allows you to track
    // multiple versions of the same task definition. The family is used as a name
    // for your task definition. Up to 255 letters (uppercase and lowercase), numbers,
    // hyphens, and underscores are allowed.
    //
    // Family is a required field
    Family *string `locationName:"family" type:"string" required:"true"`

    // The Docker networking mode to use for the containers in the task. The valid
    // values are none, bridge, and host.
    //
    // The default Docker network mode is bridge. If the network mode is set to
    // none, you cannot specify port mappings in your container definitions, and
    // the task's containers do not have external connectivity. The host network
    // mode offers the highest networking performance for containers because they
    // use the host network stack instead of the virtualized network stack provided
    // by the bridge mode; however, exposed container ports are mapped directly
    // to the corresponding host port, so you cannot take advantage of dynamic host
    // port mappings or run multiple instantiations of the same task on a single
    // container instance if port mappings are used.
    //
    // For more information, see Network settings (https://docs.docker.com/engine/reference/run/#network-settings)
    // in the Docker run reference.
    NetworkMode *string `locationName:"networkMode" type:"string" enum:"NetworkMode"`

    // An array of placement constraint objects to use for the task. You can specify
    // a maximum of 10 constraints per task (this limit includes constraints in
    // the task definition and those specified at run time).
    PlacementConstraints []*TaskDefinitionPlacementConstraint `locationName:"placementConstraints" type:"list"`

    // The short name or full Amazon Resource Name (ARN) of the IAM role that containers
    // in this task can assume. All containers in this task are granted the permissions
    // that are specified in this role. For more information, see IAM Roles for
    // Tasks (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html)
    // in the Amazon EC2 Container Service Developer Guide.
    TaskRoleArn *string `locationName:"taskRoleArn" type:"string"`

    // A list of volume definitions in JSON format that containers in your task
    // may use.
    Volumes []*Volume `locationName:"volumes" type:"list"`
    // contains filtered or unexported fields
}

func (RegisterTaskDefinitionInput) GoString ¶

func (s RegisterTaskDefinitionInput) GoString() string

GoString returns the string representation

func (*RegisterTaskDefinitionInput) SetContainerDefinitions ¶

func (s *RegisterTaskDefinitionInput) SetContainerDefinitions(v []*ContainerDefinition) *RegisterTaskDefinitionInput

SetContainerDefinitions sets the ContainerDefinitions field's value.

func (*RegisterTaskDefinitionInput) SetFamily ¶

func (s *RegisterTaskDefinitionInput) SetFamily(v string) *RegisterTaskDefinitionInput

SetFamily sets the Family field's value.

func (*RegisterTaskDefinitionInput) SetNetworkMode ¶

func (s *RegisterTaskDefinitionInput) SetNetworkMode(v string) *RegisterTaskDefinitionInput

SetNetworkMode sets the NetworkMode field's value.

func (*RegisterTaskDefinitionInput) SetPlacementConstraints ¶

func (s *RegisterTaskDefinitionInput) SetPlacementConstraints(v []*TaskDefinitionPlacementConstraint) *RegisterTaskDefinitionInput

SetPlacementConstraints sets the PlacementConstraints field's value.

func (*RegisterTaskDefinitionInput) SetTaskRoleArn ¶

func (s *RegisterTaskDefinitionInput) SetTaskRoleArn(v string) *RegisterTaskDefinitionInput

SetTaskRoleArn sets the TaskRoleArn field's value.

func (*RegisterTaskDefinitionInput) SetVolumes ¶

func (s *RegisterTaskDefinitionInput) SetVolumes(v []*Volume) *RegisterTaskDefinitionInput

SetVolumes sets the Volumes field's value.

func (RegisterTaskDefinitionInput) String ¶

func (s RegisterTaskDefinitionInput) String() string

String returns the string representation

func (*RegisterTaskDefinitionInput) Validate ¶

func (s *RegisterTaskDefinitionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RegisterTaskDefinitionOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RegisterTaskDefinitionResponse

type RegisterTaskDefinitionOutput struct {

    // The full description of the registered task definition.
    TaskDefinition *TaskDefinition `locationName:"taskDefinition" type:"structure"`
    // contains filtered or unexported fields
}

func (RegisterTaskDefinitionOutput) GoString ¶

func (s RegisterTaskDefinitionOutput) GoString() string

GoString returns the string representation

func (*RegisterTaskDefinitionOutput) SetTaskDefinition ¶

func (s *RegisterTaskDefinitionOutput) SetTaskDefinition(v *TaskDefinition) *RegisterTaskDefinitionOutput

SetTaskDefinition sets the TaskDefinition field's value.

func (RegisterTaskDefinitionOutput) String ¶

func (s RegisterTaskDefinitionOutput) String() string

String returns the string representation

type Resource ¶

Describes the resources available for a container instance. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Resource

type Resource struct {

    // When the doubleValue type is set, the value of the resource must be a double
    // precision floating-point type.
    DoubleValue *float64 `locationName:"doubleValue" type:"double"`

    // When the integerValue type is set, the value of the resource must be an integer.
    IntegerValue *int64 `locationName:"integerValue" type:"integer"`

    // When the longValue type is set, the value of the resource must be an extended
    // precision floating-point type.
    LongValue *int64 `locationName:"longValue" type:"long"`

    // The name of the resource, such as cpu, memory, ports, or a user-defined resource.
    Name *string `locationName:"name" type:"string"`

    // When the stringSetValue type is set, the value of the resource must be a
    // string type.
    StringSetValue []*string `locationName:"stringSetValue" type:"list"`

    // The type of the resource, such as INTEGER, DOUBLE, LONG, or STRINGSET.
    Type *string `locationName:"type" type:"string"`
    // contains filtered or unexported fields
}

func (Resource) GoString ¶

func (s Resource) GoString() string

GoString returns the string representation

func (*Resource) SetDoubleValue ¶

func (s *Resource) SetDoubleValue(v float64) *Resource

SetDoubleValue sets the DoubleValue field's value.

func (*Resource) SetIntegerValue ¶

func (s *Resource) SetIntegerValue(v int64) *Resource

SetIntegerValue sets the IntegerValue field's value.

func (*Resource) SetLongValue ¶

func (s *Resource) SetLongValue(v int64) *Resource

SetLongValue sets the LongValue field's value.

func (*Resource) SetName ¶

func (s *Resource) SetName(v string) *Resource

SetName sets the Name field's value.

func (*Resource) SetStringSetValue ¶

func (s *Resource) SetStringSetValue(v []*string) *Resource

SetStringSetValue sets the StringSetValue field's value.

func (*Resource) SetType ¶

func (s *Resource) SetType(v string) *Resource

SetType sets the Type field's value.

func (Resource) String ¶

func (s Resource) String() string

String returns the string representation

type RunTaskInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RunTaskRequest

type RunTaskInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster on which
    // to run your task. If you do not specify a cluster, the default cluster is
    // assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The number of instantiations of the specified task to place on your cluster.
    // You can specify up to 10 tasks per call.
    Count *int64 `locationName:"count" type:"integer"`

    // The name of the task group to associate with the task. The default value
    // is the family name of the task definition (for example, family:my-family-name).
    Group *string `locationName:"group" type:"string"`

    // A list of container overrides in JSON format that specify the name of a container
    // in the specified task definition and the overrides it should receive. You
    // can override the default command for a container (that is specified in the
    // task definition or Docker image) with a command override. You can also override
    // existing environment variables (that are specified in the task definition
    // or Docker image) on a container or add new environment variables to it with
    // an environment override.
    //
    // A total of 8192 characters are allowed for overrides. This limit includes
    // the JSON formatting characters of the override structure.
    Overrides *TaskOverride `locationName:"overrides" type:"structure"`

    // An array of placement constraint objects to use for the task. You can specify
    // up to 10 constraints per task (including constraints in the task definition
    // and those specified at run time).
    PlacementConstraints []*PlacementConstraint `locationName:"placementConstraints" type:"list"`

    // The placement strategy objects to use for the task. You can specify a maximum
    // of 5 strategy rules per task.
    PlacementStrategy []*PlacementStrategy `locationName:"placementStrategy" type:"list"`

    // An optional tag specified when a task is started. For example if you automatically
    // trigger a task to run a batch process job, you could apply a unique identifier
    // for that job to your task with the startedBy parameter. You can then identify
    // which tasks belong to that job by filtering the results of a ListTasks call
    // with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers,
    // hyphens, and underscores are allowed.
    //
    // If a task is started by an Amazon ECS service, then the startedBy parameter
    // contains the deployment ID of the service that starts it.
    StartedBy *string `locationName:"startedBy" type:"string"`

    // The family and revision (family:revision) or full Amazon Resource Name (ARN)
    // of the task definition to run. If a revision is not specified, the latest
    // ACTIVE revision is used.
    //
    // TaskDefinition is a required field
    TaskDefinition *string `locationName:"taskDefinition" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (RunTaskInput) GoString ¶

func (s RunTaskInput) GoString() string

GoString returns the string representation

func (*RunTaskInput) SetCluster ¶

func (s *RunTaskInput) SetCluster(v string) *RunTaskInput

SetCluster sets the Cluster field's value.

func (*RunTaskInput) SetCount ¶

func (s *RunTaskInput) SetCount(v int64) *RunTaskInput

SetCount sets the Count field's value.

func (*RunTaskInput) SetGroup ¶

func (s *RunTaskInput) SetGroup(v string) *RunTaskInput

SetGroup sets the Group field's value.

func (*RunTaskInput) SetOverrides ¶

func (s *RunTaskInput) SetOverrides(v *TaskOverride) *RunTaskInput

SetOverrides sets the Overrides field's value.

func (*RunTaskInput) SetPlacementConstraints ¶

func (s *RunTaskInput) SetPlacementConstraints(v []*PlacementConstraint) *RunTaskInput

SetPlacementConstraints sets the PlacementConstraints field's value.

func (*RunTaskInput) SetPlacementStrategy ¶

func (s *RunTaskInput) SetPlacementStrategy(v []*PlacementStrategy) *RunTaskInput

SetPlacementStrategy sets the PlacementStrategy field's value.

func (*RunTaskInput) SetStartedBy ¶

func (s *RunTaskInput) SetStartedBy(v string) *RunTaskInput

SetStartedBy sets the StartedBy field's value.

func (*RunTaskInput) SetTaskDefinition ¶

func (s *RunTaskInput) SetTaskDefinition(v string) *RunTaskInput

SetTaskDefinition sets the TaskDefinition field's value.

func (RunTaskInput) String ¶

func (s RunTaskInput) String() string

String returns the string representation

func (*RunTaskInput) Validate ¶

func (s *RunTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RunTaskOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/RunTaskResponse

type RunTaskOutput struct {

    // Any failures associated with the call.
    Failures []*Failure `locationName:"failures" type:"list"`

    // A full description of the tasks that were run. Each task that was successfully
    // placed on your cluster are described here.
    Tasks []*Task `locationName:"tasks" type:"list"`
    // contains filtered or unexported fields
}

func (RunTaskOutput) GoString ¶

func (s RunTaskOutput) GoString() string

GoString returns the string representation

func (*RunTaskOutput) SetFailures ¶

func (s *RunTaskOutput) SetFailures(v []*Failure) *RunTaskOutput

SetFailures sets the Failures field's value.

func (*RunTaskOutput) SetTasks ¶

func (s *RunTaskOutput) SetTasks(v []*Task) *RunTaskOutput

SetTasks sets the Tasks field's value.

func (RunTaskOutput) String ¶

func (s RunTaskOutput) String() string

String returns the string representation

type Service ¶

Details on a service within a cluster Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Service

type Service struct {

    // The Amazon Resource Name (ARN) of the cluster that hosts the service.
    ClusterArn *string `locationName:"clusterArn" type:"string"`

    // The Unix timestamp for when the service was created.
    CreatedAt *time.Time `locationName:"createdAt" type:"timestamp" timestampFormat:"unix"`

    // Optional deployment parameters that control how many tasks run during the
    // deployment and the ordering of stopping and starting tasks.
    DeploymentConfiguration *DeploymentConfiguration `locationName:"deploymentConfiguration" type:"structure"`

    // The current state of deployments for the service.
    Deployments []*Deployment `locationName:"deployments" type:"list"`

    // The desired number of instantiations of the task definition to keep running
    // on the service. This value is specified when the service is created with
    // CreateService, and it can be modified with UpdateService.
    DesiredCount *int64 `locationName:"desiredCount" type:"integer"`

    // The event stream for your service. A maximum of 100 of the latest events
    // are displayed.
    Events []*ServiceEvent `locationName:"events" type:"list"`

    // A list of Elastic Load Balancing load balancer objects, containing the load
    // balancer name, the container name (as it appears in a container definition),
    // and the container port to access from the load balancer.
    LoadBalancers []*LoadBalancer `locationName:"loadBalancers" type:"list"`

    // The number of tasks in the cluster that are in the PENDING state.
    PendingCount *int64 `locationName:"pendingCount" type:"integer"`

    // The placement constraints for the tasks in the service.
    PlacementConstraints []*PlacementConstraint `locationName:"placementConstraints" type:"list"`

    // The placement strategy that determines how tasks for the service are placed.
    PlacementStrategy []*PlacementStrategy `locationName:"placementStrategy" type:"list"`

    // The Amazon Resource Name (ARN) of the IAM role associated with the service
    // that allows the Amazon ECS container agent to register container instances
    // with an Elastic Load Balancing load balancer.
    RoleArn *string `locationName:"roleArn" type:"string"`

    // The number of tasks in the cluster that are in the RUNNING state.
    RunningCount *int64 `locationName:"runningCount" type:"integer"`

    // The Amazon Resource Name (ARN) that identifies the service. The ARN contains
    // the arn:aws:ecs namespace, followed by the region of the service, the AWS
    // account ID of the service owner, the service namespace, and then the service
    // name. For example, arn:aws:ecs:region:012345678910:service/my-service.
    ServiceArn *string `locationName:"serviceArn" type:"string"`

    // The name of your service. Up to 255 letters (uppercase and lowercase), numbers,
    // hyphens, and underscores are allowed. Service names must be unique within
    // a cluster, but you can have similarly named services in multiple clusters
    // within a region or across multiple regions.
    ServiceName *string `locationName:"serviceName" type:"string"`

    // The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
    Status *string `locationName:"status" type:"string"`

    // The task definition to use for tasks in the service. This value is specified
    // when the service is created with CreateService, and it can be modified with
    // UpdateService.
    TaskDefinition *string `locationName:"taskDefinition" type:"string"`
    // contains filtered or unexported fields
}

func (Service) GoString ¶

func (s Service) GoString() string

GoString returns the string representation

func (*Service) SetClusterArn ¶

func (s *Service) SetClusterArn(v string) *Service

SetClusterArn sets the ClusterArn field's value.

func (*Service) SetCreatedAt ¶

func (s *Service) SetCreatedAt(v time.Time) *Service

SetCreatedAt sets the CreatedAt field's value.

func (*Service) SetDeploymentConfiguration ¶

func (s *Service) SetDeploymentConfiguration(v *DeploymentConfiguration) *Service

SetDeploymentConfiguration sets the DeploymentConfiguration field's value.

func (*Service) SetDeployments ¶

func (s *Service) SetDeployments(v []*Deployment) *Service

SetDeployments sets the Deployments field's value.

func (*Service) SetDesiredCount ¶

func (s *Service) SetDesiredCount(v int64) *Service

SetDesiredCount sets the DesiredCount field's value.

func (*Service) SetEvents ¶

func (s *Service) SetEvents(v []*ServiceEvent) *Service

SetEvents sets the Events field's value.

func (*Service) SetLoadBalancers ¶

func (s *Service) SetLoadBalancers(v []*LoadBalancer) *Service

SetLoadBalancers sets the LoadBalancers field's value.

func (*Service) SetPendingCount ¶

func (s *Service) SetPendingCount(v int64) *Service

SetPendingCount sets the PendingCount field's value.

func (*Service) SetPlacementConstraints ¶

func (s *Service) SetPlacementConstraints(v []*PlacementConstraint) *Service

SetPlacementConstraints sets the PlacementConstraints field's value.

func (*Service) SetPlacementStrategy ¶

func (s *Service) SetPlacementStrategy(v []*PlacementStrategy) *Service

SetPlacementStrategy sets the PlacementStrategy field's value.

func (*Service) SetRoleArn ¶

func (s *Service) SetRoleArn(v string) *Service

SetRoleArn sets the RoleArn field's value.

func (*Service) SetRunningCount ¶

func (s *Service) SetRunningCount(v int64) *Service

SetRunningCount sets the RunningCount field's value.

func (*Service) SetServiceArn ¶

func (s *Service) SetServiceArn(v string) *Service

SetServiceArn sets the ServiceArn field's value.

func (*Service) SetServiceName ¶

func (s *Service) SetServiceName(v string) *Service

SetServiceName sets the ServiceName field's value.

func (*Service) SetStatus ¶

func (s *Service) SetStatus(v string) *Service

SetStatus sets the Status field's value.

func (*Service) SetTaskDefinition ¶

func (s *Service) SetTaskDefinition(v string) *Service

SetTaskDefinition sets the TaskDefinition field's value.

func (Service) String ¶

func (s Service) String() string

String returns the string representation

type ServiceEvent ¶

Details on an event associated with a service. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/ServiceEvent

type ServiceEvent struct {

    // The Unix timestamp for when the event was triggered.
    CreatedAt *time.Time `locationName:"createdAt" type:"timestamp" timestampFormat:"unix"`

    // The ID string of the event.
    Id *string `locationName:"id" type:"string"`

    // The event message.
    Message *string `locationName:"message" type:"string"`
    // contains filtered or unexported fields
}

func (ServiceEvent) GoString ¶

func (s ServiceEvent) GoString() string

GoString returns the string representation

func (*ServiceEvent) SetCreatedAt ¶

func (s *ServiceEvent) SetCreatedAt(v time.Time) *ServiceEvent

SetCreatedAt sets the CreatedAt field's value.

func (*ServiceEvent) SetId ¶

func (s *ServiceEvent) SetId(v string) *ServiceEvent

SetId sets the Id field's value.

func (*ServiceEvent) SetMessage ¶

func (s *ServiceEvent) SetMessage(v string) *ServiceEvent

SetMessage sets the Message field's value.

func (ServiceEvent) String ¶

func (s ServiceEvent) String() string

String returns the string representation

type StartTaskInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StartTaskRequest

type StartTaskInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster on which
    // to start your task. If you do not specify a cluster, the default cluster
    // is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The container instance IDs or full Amazon Resource Name (ARN) entries for
    // the container instances on which you would like to place your task. You can
    // specify up to 10 container instances.
    //
    // ContainerInstances is a required field
    ContainerInstances []*string `locationName:"containerInstances" type:"list" required:"true"`

    // The name of the task group to associate with the task. The default value
    // is the family name of the task definition (for example, family:my-family-name).
    Group *string `locationName:"group" type:"string"`

    // A list of container overrides in JSON format that specify the name of a container
    // in the specified task definition and the overrides it should receive. You
    // can override the default command for a container (that is specified in the
    // task definition or Docker image) with a command override. You can also override
    // existing environment variables (that are specified in the task definition
    // or Docker image) on a container or add new environment variables to it with
    // an environment override.
    //
    // A total of 8192 characters are allowed for overrides. This limit includes
    // the JSON formatting characters of the override structure.
    Overrides *TaskOverride `locationName:"overrides" type:"structure"`

    // An optional tag specified when a task is started. For example if you automatically
    // trigger a task to run a batch process job, you could apply a unique identifier
    // for that job to your task with the startedBy parameter. You can then identify
    // which tasks belong to that job by filtering the results of a ListTasks call
    // with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers,
    // hyphens, and underscores are allowed.
    //
    // If a task is started by an Amazon ECS service, then the startedBy parameter
    // contains the deployment ID of the service that starts it.
    StartedBy *string `locationName:"startedBy" type:"string"`

    // The family and revision (family:revision) or full Amazon Resource Name (ARN)
    // of the task definition to start. If a revision is not specified, the latest
    // ACTIVE revision is used.
    //
    // TaskDefinition is a required field
    TaskDefinition *string `locationName:"taskDefinition" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (StartTaskInput) GoString ¶

func (s StartTaskInput) GoString() string

GoString returns the string representation

func (*StartTaskInput) SetCluster ¶

func (s *StartTaskInput) SetCluster(v string) *StartTaskInput

SetCluster sets the Cluster field's value.

func (*StartTaskInput) SetContainerInstances ¶

func (s *StartTaskInput) SetContainerInstances(v []*string) *StartTaskInput

SetContainerInstances sets the ContainerInstances field's value.

func (*StartTaskInput) SetGroup ¶

func (s *StartTaskInput) SetGroup(v string) *StartTaskInput

SetGroup sets the Group field's value.

func (*StartTaskInput) SetOverrides ¶

func (s *StartTaskInput) SetOverrides(v *TaskOverride) *StartTaskInput

SetOverrides sets the Overrides field's value.

func (*StartTaskInput) SetStartedBy ¶

func (s *StartTaskInput) SetStartedBy(v string) *StartTaskInput

SetStartedBy sets the StartedBy field's value.

func (*StartTaskInput) SetTaskDefinition ¶

func (s *StartTaskInput) SetTaskDefinition(v string) *StartTaskInput

SetTaskDefinition sets the TaskDefinition field's value.

func (StartTaskInput) String ¶

func (s StartTaskInput) String() string

String returns the string representation

func (*StartTaskInput) Validate ¶

func (s *StartTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StartTaskOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StartTaskResponse

type StartTaskOutput struct {

    // Any failures associated with the call.
    Failures []*Failure `locationName:"failures" type:"list"`

    // A full description of the tasks that were started. Each task that was successfully
    // placed on your container instances are described here.
    Tasks []*Task `locationName:"tasks" type:"list"`
    // contains filtered or unexported fields
}

func (StartTaskOutput) GoString ¶

func (s StartTaskOutput) GoString() string

GoString returns the string representation

func (*StartTaskOutput) SetFailures ¶

func (s *StartTaskOutput) SetFailures(v []*Failure) *StartTaskOutput

SetFailures sets the Failures field's value.

func (*StartTaskOutput) SetTasks ¶

func (s *StartTaskOutput) SetTasks(v []*Task) *StartTaskOutput

SetTasks sets the Tasks field's value.

func (StartTaskOutput) String ¶

func (s StartTaskOutput) String() string

String returns the string representation

type StopTaskInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StopTaskRequest

type StopTaskInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the task to stop. If you do not specify a cluster, the default cluster is
    // assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // An optional message specified when a task is stopped. For example, if you
    // are using a custom scheduler, you can use this parameter to specify the reason
    // for stopping the task here, and the message will appear in subsequent DescribeTasks
    // API operations on this task. Up to 255 characters are allowed in this message.
    Reason *string `locationName:"reason" type:"string"`

    // The task ID or full Amazon Resource Name (ARN) entry of the task to stop.
    //
    // Task is a required field
    Task *string `locationName:"task" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (StopTaskInput) GoString ¶

func (s StopTaskInput) GoString() string

GoString returns the string representation

func (*StopTaskInput) SetCluster ¶

func (s *StopTaskInput) SetCluster(v string) *StopTaskInput

SetCluster sets the Cluster field's value.

func (*StopTaskInput) SetReason ¶

func (s *StopTaskInput) SetReason(v string) *StopTaskInput

SetReason sets the Reason field's value.

func (*StopTaskInput) SetTask ¶

func (s *StopTaskInput) SetTask(v string) *StopTaskInput

SetTask sets the Task field's value.

func (StopTaskInput) String ¶

func (s StopTaskInput) String() string

String returns the string representation

func (*StopTaskInput) Validate ¶

func (s *StopTaskInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StopTaskOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/StopTaskResponse

type StopTaskOutput struct {

    // The task that was stopped.
    Task *Task `locationName:"task" type:"structure"`
    // contains filtered or unexported fields
}

func (StopTaskOutput) GoString ¶

func (s StopTaskOutput) GoString() string

GoString returns the string representation

func (*StopTaskOutput) SetTask ¶

func (s *StopTaskOutput) SetTask(v *Task) *StopTaskOutput

SetTask sets the Task field's value.

func (StopTaskOutput) String ¶

func (s StopTaskOutput) String() string

String returns the string representation

type SubmitContainerStateChangeInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitContainerStateChangeRequest

type SubmitContainerStateChangeInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the container.
    Cluster *string `locationName:"cluster" type:"string"`

    // The name of the container.
    ContainerName *string `locationName:"containerName" type:"string"`

    // The exit code returned for the state change request.
    ExitCode *int64 `locationName:"exitCode" type:"integer"`

    // The network bindings of the container.
    NetworkBindings []*NetworkBinding `locationName:"networkBindings" type:"list"`

    // The reason for the state change request.
    Reason *string `locationName:"reason" type:"string"`

    // The status of the state change request.
    Status *string `locationName:"status" type:"string"`

    // The task ID or full Amazon Resource Name (ARN) of the task that hosts the
    // container.
    Task *string `locationName:"task" type:"string"`
    // contains filtered or unexported fields
}

func (SubmitContainerStateChangeInput) GoString ¶

func (s SubmitContainerStateChangeInput) GoString() string

GoString returns the string representation

func (*SubmitContainerStateChangeInput) SetCluster ¶

func (s *SubmitContainerStateChangeInput) SetCluster(v string) *SubmitContainerStateChangeInput

SetCluster sets the Cluster field's value.

func (*SubmitContainerStateChangeInput) SetContainerName ¶

func (s *SubmitContainerStateChangeInput) SetContainerName(v string) *SubmitContainerStateChangeInput

SetContainerName sets the ContainerName field's value.

func (*SubmitContainerStateChangeInput) SetExitCode ¶

func (s *SubmitContainerStateChangeInput) SetExitCode(v int64) *SubmitContainerStateChangeInput

SetExitCode sets the ExitCode field's value.

func (*SubmitContainerStateChangeInput) SetNetworkBindings ¶

func (s *SubmitContainerStateChangeInput) SetNetworkBindings(v []*NetworkBinding) *SubmitContainerStateChangeInput

SetNetworkBindings sets the NetworkBindings field's value.

func (*SubmitContainerStateChangeInput) SetReason ¶

func (s *SubmitContainerStateChangeInput) SetReason(v string) *SubmitContainerStateChangeInput

SetReason sets the Reason field's value.

func (*SubmitContainerStateChangeInput) SetStatus ¶

func (s *SubmitContainerStateChangeInput) SetStatus(v string) *SubmitContainerStateChangeInput

SetStatus sets the Status field's value.

func (*SubmitContainerStateChangeInput) SetTask ¶

func (s *SubmitContainerStateChangeInput) SetTask(v string) *SubmitContainerStateChangeInput

SetTask sets the Task field's value.

func (SubmitContainerStateChangeInput) String ¶

func (s SubmitContainerStateChangeInput) String() string

String returns the string representation

type SubmitContainerStateChangeOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitContainerStateChangeResponse

type SubmitContainerStateChangeOutput struct {

    // Acknowledgement of the state change.
    Acknowledgment *string `locationName:"acknowledgment" type:"string"`
    // contains filtered or unexported fields
}

func (SubmitContainerStateChangeOutput) GoString ¶

func (s SubmitContainerStateChangeOutput) GoString() string

GoString returns the string representation

func (*SubmitContainerStateChangeOutput) SetAcknowledgment ¶

func (s *SubmitContainerStateChangeOutput) SetAcknowledgment(v string) *SubmitContainerStateChangeOutput

SetAcknowledgment sets the Acknowledgment field's value.

func (SubmitContainerStateChangeOutput) String ¶

func (s SubmitContainerStateChangeOutput) String() string

String returns the string representation

type SubmitTaskStateChangeInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitTaskStateChangeRequest

type SubmitTaskStateChangeInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the task.
    Cluster *string `locationName:"cluster" type:"string"`

    // The reason for the state change request.
    Reason *string `locationName:"reason" type:"string"`

    // The status of the state change request.
    Status *string `locationName:"status" type:"string"`

    // The task ID or full Amazon Resource Name (ARN) of the task in the state change
    // request.
    Task *string `locationName:"task" type:"string"`
    // contains filtered or unexported fields
}

func (SubmitTaskStateChangeInput) GoString ¶

func (s SubmitTaskStateChangeInput) GoString() string

GoString returns the string representation

func (*SubmitTaskStateChangeInput) SetCluster ¶

func (s *SubmitTaskStateChangeInput) SetCluster(v string) *SubmitTaskStateChangeInput

SetCluster sets the Cluster field's value.

func (*SubmitTaskStateChangeInput) SetReason ¶

func (s *SubmitTaskStateChangeInput) SetReason(v string) *SubmitTaskStateChangeInput

SetReason sets the Reason field's value.

func (*SubmitTaskStateChangeInput) SetStatus ¶

func (s *SubmitTaskStateChangeInput) SetStatus(v string) *SubmitTaskStateChangeInput

SetStatus sets the Status field's value.

func (*SubmitTaskStateChangeInput) SetTask ¶

func (s *SubmitTaskStateChangeInput) SetTask(v string) *SubmitTaskStateChangeInput

SetTask sets the Task field's value.

func (SubmitTaskStateChangeInput) String ¶

func (s SubmitTaskStateChangeInput) String() string

String returns the string representation

type SubmitTaskStateChangeOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/SubmitTaskStateChangeResponse

type SubmitTaskStateChangeOutput struct {

    // Acknowledgement of the state change.
    Acknowledgment *string `locationName:"acknowledgment" type:"string"`
    // contains filtered or unexported fields
}

func (SubmitTaskStateChangeOutput) GoString ¶

func (s SubmitTaskStateChangeOutput) GoString() string

GoString returns the string representation

func (*SubmitTaskStateChangeOutput) SetAcknowledgment ¶

func (s *SubmitTaskStateChangeOutput) SetAcknowledgment(v string) *SubmitTaskStateChangeOutput

SetAcknowledgment sets the Acknowledgment field's value.

func (SubmitTaskStateChangeOutput) String ¶

func (s SubmitTaskStateChangeOutput) String() string

String returns the string representation

type Task ¶

Details on a task in a cluster. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Task

type Task struct {

    // The Amazon Resource Name (ARN) of the cluster that hosts the task.
    ClusterArn *string `locationName:"clusterArn" type:"string"`

    // The Amazon Resource Name (ARN) of the container instances that host the task.
    ContainerInstanceArn *string `locationName:"containerInstanceArn" type:"string"`

    // The containers associated with the task.
    Containers []*Container `locationName:"containers" type:"list"`

    // The Unix timestamp for when the task was created (the task entered the PENDING
    // state).
    CreatedAt *time.Time `locationName:"createdAt" type:"timestamp" timestampFormat:"unix"`

    // The desired status of the task.
    DesiredStatus *string `locationName:"desiredStatus" type:"string"`

    // The name of the task group associated with the task.
    Group *string `locationName:"group" type:"string"`

    // The last known status of the task.
    LastStatus *string `locationName:"lastStatus" type:"string"`

    // One or more container overrides.
    Overrides *TaskOverride `locationName:"overrides" type:"structure"`

    // The Unix timestamp for when the task was started (the task transitioned from
    // the PENDING state to the RUNNING state).
    StartedAt *time.Time `locationName:"startedAt" type:"timestamp" timestampFormat:"unix"`

    // The tag specified when a task is started. If the task is started by an Amazon
    // ECS service, then the startedBy parameter contains the deployment ID of the
    // service that starts it.
    StartedBy *string `locationName:"startedBy" type:"string"`

    // The Unix timestamp for when the task was stopped (the task transitioned from
    // the RUNNING state to the STOPPED state).
    StoppedAt *time.Time `locationName:"stoppedAt" type:"timestamp" timestampFormat:"unix"`

    // The reason the task was stopped.
    StoppedReason *string `locationName:"stoppedReason" type:"string"`

    // The Amazon Resource Name (ARN) of the task.
    TaskArn *string `locationName:"taskArn" type:"string"`

    // The Amazon Resource Name (ARN) of the task definition that creates the task.
    TaskDefinitionArn *string `locationName:"taskDefinitionArn" type:"string"`

    // The version counter for the task. Every time a task experiences a change
    // that triggers a CloudWatch event, the version counter is incremented. If
    // you are replicating your Amazon ECS task state with CloudWatch events, you
    // can compare the version of a task reported by the Amazon ECS APIs with the
    // version reported in CloudWatch events for the task (inside the detail object)
    // to verify that the version in your event stream is current.
    Version *int64 `locationName:"version" type:"long"`
    // contains filtered or unexported fields
}

func (Task) GoString ¶

func (s Task) GoString() string

GoString returns the string representation

func (*Task) SetClusterArn ¶

func (s *Task) SetClusterArn(v string) *Task

SetClusterArn sets the ClusterArn field's value.

func (*Task) SetContainerInstanceArn ¶

func (s *Task) SetContainerInstanceArn(v string) *Task

SetContainerInstanceArn sets the ContainerInstanceArn field's value.

func (*Task) SetContainers ¶

func (s *Task) SetContainers(v []*Container) *Task

SetContainers sets the Containers field's value.

func (*Task) SetCreatedAt ¶

func (s *Task) SetCreatedAt(v time.Time) *Task

SetCreatedAt sets the CreatedAt field's value.

func (*Task) SetDesiredStatus ¶

func (s *Task) SetDesiredStatus(v string) *Task

SetDesiredStatus sets the DesiredStatus field's value.

func (*Task) SetGroup ¶

func (s *Task) SetGroup(v string) *Task

SetGroup sets the Group field's value.

func (*Task) SetLastStatus ¶

func (s *Task) SetLastStatus(v string) *Task

SetLastStatus sets the LastStatus field's value.

func (*Task) SetOverrides ¶

func (s *Task) SetOverrides(v *TaskOverride) *Task

SetOverrides sets the Overrides field's value.

func (*Task) SetStartedAt ¶

func (s *Task) SetStartedAt(v time.Time) *Task

SetStartedAt sets the StartedAt field's value.

func (*Task) SetStartedBy ¶

func (s *Task) SetStartedBy(v string) *Task

SetStartedBy sets the StartedBy field's value.

func (*Task) SetStoppedAt ¶

func (s *Task) SetStoppedAt(v time.Time) *Task

SetStoppedAt sets the StoppedAt field's value.

func (*Task) SetStoppedReason ¶

func (s *Task) SetStoppedReason(v string) *Task

SetStoppedReason sets the StoppedReason field's value.

func (*Task) SetTaskArn ¶

func (s *Task) SetTaskArn(v string) *Task

SetTaskArn sets the TaskArn field's value.

func (*Task) SetTaskDefinitionArn ¶

func (s *Task) SetTaskDefinitionArn(v string) *Task

SetTaskDefinitionArn sets the TaskDefinitionArn field's value.

func (*Task) SetVersion ¶

func (s *Task) SetVersion(v int64) *Task

SetVersion sets the Version field's value.

func (Task) String ¶

func (s Task) String() string

String returns the string representation

type TaskDefinition ¶

Details of a task definition. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/TaskDefinition

type TaskDefinition struct {

    // A list of container definitions in JSON format that describe the different
    // containers that make up your task. For more information about container definition
    // parameters and defaults, see Amazon ECS Task Definitions (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html)
    // in the Amazon EC2 Container Service Developer Guide.
    ContainerDefinitions []*ContainerDefinition `locationName:"containerDefinitions" type:"list"`

    // The family of your task definition, used as the definition name.
    Family *string `locationName:"family" type:"string"`

    // The Docker networking mode to use for the containers in the task. The valid
    // values are none, bridge, and host.
    //
    // If the network mode is none, the containers do not have external connectivity.
    // The default Docker network mode is bridge. The host network mode offers the
    // highest networking performance for containers because it uses the host network
    // stack instead of the virtualized network stack provided by the bridge mode.
    //
    // For more information, see Network settings (https://docs.docker.com/engine/reference/run/#network-settings)
    // in the Docker run reference.
    NetworkMode *string `locationName:"networkMode" type:"string" enum:"NetworkMode"`

    // An array of placement constraint objects to use for tasks.
    PlacementConstraints []*TaskDefinitionPlacementConstraint `locationName:"placementConstraints" type:"list"`

    // The container instance attributes required by your task.
    RequiresAttributes []*Attribute `locationName:"requiresAttributes" type:"list"`

    // The revision of the task in a particular family. The revision is a version
    // number of a task definition in a family. When you register a task definition
    // for the first time, the revision is 1; each time you register a new revision
    // of a task definition in the same family, the revision value always increases
    // by one (even if you have deregistered previous revisions in this family).
    Revision *int64 `locationName:"revision" type:"integer"`

    // The status of the task definition.
    Status *string `locationName:"status" type:"string" enum:"TaskDefinitionStatus"`

    // The full Amazon Resource Name (ARN) of the task definition.
    TaskDefinitionArn *string `locationName:"taskDefinitionArn" type:"string"`

    // The Amazon Resource Name (ARN) of the IAM role that containers in this task
    // can assume. All containers in this task are granted the permissions that
    // are specified in this role.
    TaskRoleArn *string `locationName:"taskRoleArn" type:"string"`

    // The list of volumes in a task. For more information about volume definition
    // parameters and defaults, see Amazon ECS Task Definitions (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html)
    // in the Amazon EC2 Container Service Developer Guide.
    Volumes []*Volume `locationName:"volumes" type:"list"`
    // contains filtered or unexported fields
}

func (TaskDefinition) GoString ¶

func (s TaskDefinition) GoString() string

GoString returns the string representation

func (*TaskDefinition) SetContainerDefinitions ¶

func (s *TaskDefinition) SetContainerDefinitions(v []*ContainerDefinition) *TaskDefinition

SetContainerDefinitions sets the ContainerDefinitions field's value.

func (*TaskDefinition) SetFamily ¶

func (s *TaskDefinition) SetFamily(v string) *TaskDefinition

SetFamily sets the Family field's value.

func (*TaskDefinition) SetNetworkMode ¶

func (s *TaskDefinition) SetNetworkMode(v string) *TaskDefinition

SetNetworkMode sets the NetworkMode field's value.

func (*TaskDefinition) SetPlacementConstraints ¶

func (s *TaskDefinition) SetPlacementConstraints(v []*TaskDefinitionPlacementConstraint) *TaskDefinition

SetPlacementConstraints sets the PlacementConstraints field's value.

func (*TaskDefinition) SetRequiresAttributes ¶

func (s *TaskDefinition) SetRequiresAttributes(v []*Attribute) *TaskDefinition

SetRequiresAttributes sets the RequiresAttributes field's value.

func (*TaskDefinition) SetRevision ¶

func (s *TaskDefinition) SetRevision(v int64) *TaskDefinition

SetRevision sets the Revision field's value.

func (*TaskDefinition) SetStatus ¶

func (s *TaskDefinition) SetStatus(v string) *TaskDefinition

SetStatus sets the Status field's value.

func (*TaskDefinition) SetTaskDefinitionArn ¶

func (s *TaskDefinition) SetTaskDefinitionArn(v string) *TaskDefinition

SetTaskDefinitionArn sets the TaskDefinitionArn field's value.

func (*TaskDefinition) SetTaskRoleArn ¶

func (s *TaskDefinition) SetTaskRoleArn(v string) *TaskDefinition

SetTaskRoleArn sets the TaskRoleArn field's value.

func (*TaskDefinition) SetVolumes ¶

func (s *TaskDefinition) SetVolumes(v []*Volume) *TaskDefinition

SetVolumes sets the Volumes field's value.

func (TaskDefinition) String ¶

func (s TaskDefinition) String() string

String returns the string representation

type TaskDefinitionPlacementConstraint ¶

An object representing a constraint on task placement in the task definition. For more information, see Task Placement Constraints (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html) in the Amazon EC2 Container Service Developer Guide. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/TaskDefinitionPlacementConstraint

type TaskDefinitionPlacementConstraint struct {

    // A cluster query language expression to apply to the constraint. For more
    // information, see Cluster Query Language (http://docs.aws.amazon.com/AmazonECS/latest/developerguide/cluster-query-language.html)
    // in the Amazon EC2 Container Service Developer Guide.
    Expression *string `locationName:"expression" type:"string"`

    // The type of constraint. The DistinctInstance constraint ensures that each
    // task in a particular group is running on a different container instance.
    // The MemberOf constraint restricts selection to be from a group of valid candidates.
    Type *string `locationName:"type" type:"string" enum:"TaskDefinitionPlacementConstraintType"`
    // contains filtered or unexported fields
}

func (TaskDefinitionPlacementConstraint) GoString ¶

func (s TaskDefinitionPlacementConstraint) GoString() string

GoString returns the string representation

func (*TaskDefinitionPlacementConstraint) SetExpression ¶

func (s *TaskDefinitionPlacementConstraint) SetExpression(v string) *TaskDefinitionPlacementConstraint

SetExpression sets the Expression field's value.

func (*TaskDefinitionPlacementConstraint) SetType ¶

func (s *TaskDefinitionPlacementConstraint) SetType(v string) *TaskDefinitionPlacementConstraint

SetType sets the Type field's value.

func (TaskDefinitionPlacementConstraint) String ¶

func (s TaskDefinitionPlacementConstraint) String() string

String returns the string representation

type TaskOverride ¶

The overrides associated with a task. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/TaskOverride

type TaskOverride struct {

    // One or more container overrides sent to a task.
    ContainerOverrides []*ContainerOverride `locationName:"containerOverrides" type:"list"`

    // The Amazon Resource Name (ARN) of the IAM role that containers in this task
    // can assume. All containers in this task are granted the permissions that
    // are specified in this role.
    TaskRoleArn *string `locationName:"taskRoleArn" type:"string"`
    // contains filtered or unexported fields
}

func (TaskOverride) GoString ¶

func (s TaskOverride) GoString() string

GoString returns the string representation

func (*TaskOverride) SetContainerOverrides ¶

func (s *TaskOverride) SetContainerOverrides(v []*ContainerOverride) *TaskOverride

SetContainerOverrides sets the ContainerOverrides field's value.

func (*TaskOverride) SetTaskRoleArn ¶

func (s *TaskOverride) SetTaskRoleArn(v string) *TaskOverride

SetTaskRoleArn sets the TaskRoleArn field's value.

func (TaskOverride) String ¶

func (s TaskOverride) String() string

String returns the string representation

type Ulimit ¶

The ulimit settings to pass to the container. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Ulimit

type Ulimit struct {

    // The hard limit for the ulimit type.
    //
    // HardLimit is a required field
    HardLimit *int64 `locationName:"hardLimit" type:"integer" required:"true"`

    // The type of the ulimit.
    //
    // Name is a required field
    Name *string `locationName:"name" type:"string" required:"true" enum:"UlimitName"`

    // The soft limit for the ulimit type.
    //
    // SoftLimit is a required field
    SoftLimit *int64 `locationName:"softLimit" type:"integer" required:"true"`
    // contains filtered or unexported fields
}

func (Ulimit) GoString ¶

func (s Ulimit) GoString() string

GoString returns the string representation

func (*Ulimit) SetHardLimit ¶

func (s *Ulimit) SetHardLimit(v int64) *Ulimit

SetHardLimit sets the HardLimit field's value.

func (*Ulimit) SetName ¶

func (s *Ulimit) SetName(v string) *Ulimit

SetName sets the Name field's value.

func (*Ulimit) SetSoftLimit ¶

func (s *Ulimit) SetSoftLimit(v int64) *Ulimit

SetSoftLimit sets the SoftLimit field's value.

func (Ulimit) String ¶

func (s Ulimit) String() string

String returns the string representation

func (*Ulimit) Validate ¶

func (s *Ulimit) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateContainerAgentInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerAgentRequest

type UpdateContainerAgentInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that your
    // container instance is running on. If you do not specify a cluster, the default
    // cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // The container instance ID or full Amazon Resource Name (ARN) entries for
    // the container instance on which you would like to update the Amazon ECS container
    // agent.
    //
    // ContainerInstance is a required field
    ContainerInstance *string `locationName:"containerInstance" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (UpdateContainerAgentInput) GoString ¶

func (s UpdateContainerAgentInput) GoString() string

GoString returns the string representation

func (*UpdateContainerAgentInput) SetCluster ¶

func (s *UpdateContainerAgentInput) SetCluster(v string) *UpdateContainerAgentInput

SetCluster sets the Cluster field's value.

func (*UpdateContainerAgentInput) SetContainerInstance ¶

func (s *UpdateContainerAgentInput) SetContainerInstance(v string) *UpdateContainerAgentInput

SetContainerInstance sets the ContainerInstance field's value.

func (UpdateContainerAgentInput) String ¶

func (s UpdateContainerAgentInput) String() string

String returns the string representation

func (*UpdateContainerAgentInput) Validate ¶

func (s *UpdateContainerAgentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateContainerAgentOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerAgentResponse

type UpdateContainerAgentOutput struct {

    // The container instance for which the container agent was updated.
    ContainerInstance *ContainerInstance `locationName:"containerInstance" type:"structure"`
    // contains filtered or unexported fields
}

func (UpdateContainerAgentOutput) GoString ¶

func (s UpdateContainerAgentOutput) GoString() string

GoString returns the string representation

func (*UpdateContainerAgentOutput) SetContainerInstance ¶

func (s *UpdateContainerAgentOutput) SetContainerInstance(v *ContainerInstance) *UpdateContainerAgentOutput

SetContainerInstance sets the ContainerInstance field's value.

func (UpdateContainerAgentOutput) String ¶

func (s UpdateContainerAgentOutput) String() string

String returns the string representation

type UpdateContainerInstancesStateInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerInstancesStateRequest

type UpdateContainerInstancesStateInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that hosts
    // the container instance to update. If you do not specify a cluster, the default
    // cluster is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // A list of container instance IDs or full Amazon Resource Name (ARN) entries.
    //
    // ContainerInstances is a required field
    ContainerInstances []*string `locationName:"containerInstances" type:"list" required:"true"`

    // The container instance state with which to update the container instance.
    //
    // Status is a required field
    Status *string `locationName:"status" type:"string" required:"true" enum:"ContainerInstanceStatus"`
    // contains filtered or unexported fields
}

func (UpdateContainerInstancesStateInput) GoString ¶

func (s UpdateContainerInstancesStateInput) GoString() string

GoString returns the string representation

func (*UpdateContainerInstancesStateInput) SetCluster ¶

func (s *UpdateContainerInstancesStateInput) SetCluster(v string) *UpdateContainerInstancesStateInput

SetCluster sets the Cluster field's value.

func (*UpdateContainerInstancesStateInput) SetContainerInstances ¶

func (s *UpdateContainerInstancesStateInput) SetContainerInstances(v []*string) *UpdateContainerInstancesStateInput

SetContainerInstances sets the ContainerInstances field's value.

func (*UpdateContainerInstancesStateInput) SetStatus ¶

func (s *UpdateContainerInstancesStateInput) SetStatus(v string) *UpdateContainerInstancesStateInput

SetStatus sets the Status field's value.

func (UpdateContainerInstancesStateInput) String ¶

func (s UpdateContainerInstancesStateInput) String() string

String returns the string representation

func (*UpdateContainerInstancesStateInput) Validate ¶

func (s *UpdateContainerInstancesStateInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateContainerInstancesStateOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateContainerInstancesStateResponse

type UpdateContainerInstancesStateOutput struct {

    // The list of container instances.
    ContainerInstances []*ContainerInstance `locationName:"containerInstances" type:"list"`

    // Any failures associated with the call.
    Failures []*Failure `locationName:"failures" type:"list"`
    // contains filtered or unexported fields
}

func (UpdateContainerInstancesStateOutput) GoString ¶

func (s UpdateContainerInstancesStateOutput) GoString() string

GoString returns the string representation

func (*UpdateContainerInstancesStateOutput) SetContainerInstances ¶

func (s *UpdateContainerInstancesStateOutput) SetContainerInstances(v []*ContainerInstance) *UpdateContainerInstancesStateOutput

SetContainerInstances sets the ContainerInstances field's value.

func (*UpdateContainerInstancesStateOutput) SetFailures ¶

func (s *UpdateContainerInstancesStateOutput) SetFailures(v []*Failure) *UpdateContainerInstancesStateOutput

SetFailures sets the Failures field's value.

func (UpdateContainerInstancesStateOutput) String ¶

func (s UpdateContainerInstancesStateOutput) String() string

String returns the string representation

type UpdateServiceInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateServiceRequest

type UpdateServiceInput struct {

    // The short name or full Amazon Resource Name (ARN) of the cluster that your
    // service is running on. If you do not specify a cluster, the default cluster
    // is assumed.
    Cluster *string `locationName:"cluster" type:"string"`

    // Optional deployment parameters that control how many tasks run during the
    // deployment and the ordering of stopping and starting tasks.
    DeploymentConfiguration *DeploymentConfiguration `locationName:"deploymentConfiguration" type:"structure"`

    // The number of instantiations of the task to place and keep running in your
    // service.
    DesiredCount *int64 `locationName:"desiredCount" type:"integer"`

    // The name of the service to update.
    //
    // Service is a required field
    Service *string `locationName:"service" type:"string" required:"true"`

    // The family and revision (family:revision) or full Amazon Resource Name (ARN)
    // of the task definition to run in your service. If a revision is not specified,
    // the latest ACTIVE revision is used. If you modify the task definition with
    // UpdateService, Amazon ECS spawns a task with the new version of the task
    // definition and then stops an old task after the new version is running.
    TaskDefinition *string `locationName:"taskDefinition" type:"string"`
    // contains filtered or unexported fields
}

func (UpdateServiceInput) GoString ¶

func (s UpdateServiceInput) GoString() string

GoString returns the string representation

func (*UpdateServiceInput) SetCluster ¶

func (s *UpdateServiceInput) SetCluster(v string) *UpdateServiceInput

SetCluster sets the Cluster field's value.

func (*UpdateServiceInput) SetDeploymentConfiguration ¶

func (s *UpdateServiceInput) SetDeploymentConfiguration(v *DeploymentConfiguration) *UpdateServiceInput

SetDeploymentConfiguration sets the DeploymentConfiguration field's value.

func (*UpdateServiceInput) SetDesiredCount ¶

func (s *UpdateServiceInput) SetDesiredCount(v int64) *UpdateServiceInput

SetDesiredCount sets the DesiredCount field's value.

func (*UpdateServiceInput) SetService ¶

func (s *UpdateServiceInput) SetService(v string) *UpdateServiceInput

SetService sets the Service field's value.

func (*UpdateServiceInput) SetTaskDefinition ¶

func (s *UpdateServiceInput) SetTaskDefinition(v string) *UpdateServiceInput

SetTaskDefinition sets the TaskDefinition field's value.

func (UpdateServiceInput) String ¶

func (s UpdateServiceInput) String() string

String returns the string representation

func (*UpdateServiceInput) Validate ¶

func (s *UpdateServiceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateServiceOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/UpdateServiceResponse

type UpdateServiceOutput struct {

    // The full description of your service following the update call.
    Service *Service `locationName:"service" type:"structure"`
    // contains filtered or unexported fields
}

func (UpdateServiceOutput) GoString ¶

func (s UpdateServiceOutput) GoString() string

GoString returns the string representation

func (*UpdateServiceOutput) SetService ¶

func (s *UpdateServiceOutput) SetService(v *Service) *UpdateServiceOutput

SetService sets the Service field's value.

func (UpdateServiceOutput) String ¶

func (s UpdateServiceOutput) String() string

String returns the string representation

type VersionInfo ¶

The Docker and Amazon ECS container agent version information about a container instance. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/VersionInfo

type VersionInfo struct {

    // The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent
    //  (https://github.com/aws/amazon-ecs-agent/commits/master) GitHub repository.
    AgentHash *string `locationName:"agentHash" type:"string"`

    // The version number of the Amazon ECS container agent.
    AgentVersion *string `locationName:"agentVersion" type:"string"`

    // The Docker version running on the container instance.
    DockerVersion *string `locationName:"dockerVersion" type:"string"`
    // contains filtered or unexported fields
}

func (VersionInfo) GoString ¶

func (s VersionInfo) GoString() string

GoString returns the string representation

func (*VersionInfo) SetAgentHash ¶

func (s *VersionInfo) SetAgentHash(v string) *VersionInfo

SetAgentHash sets the AgentHash field's value.

func (*VersionInfo) SetAgentVersion ¶

func (s *VersionInfo) SetAgentVersion(v string) *VersionInfo

SetAgentVersion sets the AgentVersion field's value.

func (*VersionInfo) SetDockerVersion ¶

func (s *VersionInfo) SetDockerVersion(v string) *VersionInfo

SetDockerVersion sets the DockerVersion field's value.

func (VersionInfo) String ¶

func (s VersionInfo) String() string

String returns the string representation

type Volume ¶

A data volume used in a task definition. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/Volume

type Volume struct {

    // The contents of the host parameter determine whether your data volume persists
    // on the host container instance and where it is stored. If the host parameter
    // is empty, then the Docker daemon assigns a host path for your data volume,
    // but the data is not guaranteed to persist after the containers associated
    // with it stop running.
    Host *HostVolumeProperties `locationName:"host" type:"structure"`

    // The name of the volume. Up to 255 letters (uppercase and lowercase), numbers,
    // hyphens, and underscores are allowed. This name is referenced in the sourceVolume
    // parameter of container definition mountPoints.
    Name *string `locationName:"name" type:"string"`
    // contains filtered or unexported fields
}

func (Volume) GoString ¶

func (s Volume) GoString() string

GoString returns the string representation

func (*Volume) SetHost ¶

func (s *Volume) SetHost(v *HostVolumeProperties) *Volume

SetHost sets the Host field's value.

func (*Volume) SetName ¶

func (s *Volume) SetName(v string) *Volume

SetName sets the Name field's value.

func (Volume) String ¶

func (s Volume) String() string

String returns the string representation

type VolumeFrom ¶

Details on a data volume from another container in the same task definition. Please also see https://docs.aws.amazon.com/goto/WebAPI/ecs-2014-11-13/VolumeFrom

type VolumeFrom struct {

    // If this value is true, the container has read-only access to the volume.
    // If this value is false, then the container can write to the volume. The default
    // value is false.
    ReadOnly *bool `locationName:"readOnly" type:"boolean"`

    // The name of another container within the same task definition to mount volumes
    // from.
    SourceContainer *string `locationName:"sourceContainer" type:"string"`
    // contains filtered or unexported fields
}

func (VolumeFrom) GoString ¶

func (s VolumeFrom) GoString() string

GoString returns the string representation

func (*VolumeFrom) SetReadOnly ¶

func (s *VolumeFrom) SetReadOnly(v bool) *VolumeFrom

SetReadOnly sets the ReadOnly field's value.

func (*VolumeFrom) SetSourceContainer ¶

func (s *VolumeFrom) SetSourceContainer(v string) *VolumeFrom

SetSourceContainer sets the SourceContainer field's value.

func (VolumeFrom) String ¶

func (s VolumeFrom) String() string

String returns the string representation

Subdirectories