plugin_go - ActiveState ActiveGo 1.8
...

Package plugin_go

import "github.com/gogo/protobuf/protoc-gen-gogo/plugin"
Overview
Index

Overview ▾

Package plugin_go is a generated protocol buffer package.

It is generated from these files:

plugin.proto

It has these top-level messages:

CodeGeneratorRequest
CodeGeneratorResponse

type CodeGeneratorRequest

An encoded CodeGeneratorRequest is written to the plugin's stdin.

type CodeGeneratorRequest struct {
    // The .proto files that were explicitly listed on the command-line.  The
    // code generator should generate code only for these files.  Each file's
    // descriptor will be included in proto_file, below.
    FileToGenerate []string `protobuf:"bytes,1,rep,name=file_to_generate,json=fileToGenerate" json:"file_to_generate,omitempty"`
    // The generator parameter passed on the command-line.
    Parameter *string `protobuf:"bytes,2,opt,name=parameter" json:"parameter,omitempty"`
    // FileDescriptorProtos for all files in files_to_generate and everything
    // they import.  The files will appear in topological order, so each file
    // appears before any file that imports it.
    //
    // protoc guarantees that all proto_files will be written after
    // the fields above, even though this is not technically guaranteed by the
    // protobuf wire format.  This theoretically could allow a plugin to stream
    // in the FileDescriptorProtos and handle them one by one rather than read
    // the entire set into memory at once.  However, as of this writing, this
    // is not similarly optimized on protoc's end -- it will store all fields in
    // memory at once before sending them to the plugin.
    ProtoFile        []*google_protobuf.FileDescriptorProto `protobuf:"bytes,15,rep,name=proto_file,json=protoFile" json:"proto_file,omitempty"`
    XXX_unrecognized []byte                                 `json:"-"`
}

func (*CodeGeneratorRequest) Descriptor

func (*CodeGeneratorRequest) Descriptor() ([]byte, []int)

func (*CodeGeneratorRequest) GetFileToGenerate

func (m *CodeGeneratorRequest) GetFileToGenerate() []string

func (*CodeGeneratorRequest) GetParameter

func (m *CodeGeneratorRequest) GetParameter() string

func (*CodeGeneratorRequest) GetProtoFile

func (m *CodeGeneratorRequest) GetProtoFile() []*google_protobuf.FileDescriptorProto

func (*CodeGeneratorRequest) ProtoMessage

func (*CodeGeneratorRequest) ProtoMessage()

func (*CodeGeneratorRequest) Reset

func (m *CodeGeneratorRequest) Reset()

func (*CodeGeneratorRequest) String

func (m *CodeGeneratorRequest) String() string

type CodeGeneratorResponse

The plugin writes an encoded CodeGeneratorResponse to stdout.

type CodeGeneratorResponse struct {
    // Error message.  If non-empty, code generation failed.  The plugin process
    // should exit with status code zero even if it reports an error in this way.
    //
    // This should be used to indicate errors in .proto files which prevent the
    // code generator from generating correct code.  Errors which indicate a
    // problem in protoc itself -- such as the input CodeGeneratorRequest being
    // unparseable -- should be reported by writing a message to stderr and
    // exiting with a non-zero status code.
    Error            *string                       `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
    File             []*CodeGeneratorResponse_File `protobuf:"bytes,15,rep,name=file" json:"file,omitempty"`
    XXX_unrecognized []byte                        `json:"-"`
}

func (*CodeGeneratorResponse) Descriptor

func (*CodeGeneratorResponse) Descriptor() ([]byte, []int)

func (*CodeGeneratorResponse) GetError

func (m *CodeGeneratorResponse) GetError() string

func (*CodeGeneratorResponse) GetFile

func (m *CodeGeneratorResponse) GetFile() []*CodeGeneratorResponse_File

func (*CodeGeneratorResponse) ProtoMessage

func (*CodeGeneratorResponse) ProtoMessage()

func (*CodeGeneratorResponse) Reset

func (m *CodeGeneratorResponse) Reset()

func (*CodeGeneratorResponse) String

func (m *CodeGeneratorResponse) String() string

type CodeGeneratorResponse_File

Represents a single generated file.

type CodeGeneratorResponse_File struct {
    // The file name, relative to the output directory.  The name must not
    // contain "." or ".." components and must be relative, not be absolute (so,
    // the file cannot lie outside the output directory).  "/" must be used as
    // the path separator, not "\".
    //
    // If the name is omitted, the content will be appended to the previous
    // file.  This allows the generator to break large files into small chunks,
    // and allows the generated text to be streamed back to protoc so that large
    // files need not reside completely in memory at one time.  Note that as of
    // this writing protoc does not optimize for this -- it will read the entire
    // CodeGeneratorResponse before writing files to disk.
    Name *string `protobuf:"bytes,1,opt,name=name" json:"name,omitempty"`
    // If non-empty, indicates that the named file should already exist, and the
    // content here is to be inserted into that file at a defined insertion
    // point.  This feature allows a code generator to extend the output
    // produced by another code generator.  The original generator may provide
    // insertion points by placing special annotations in the file that look
    // like:
    //   @@protoc_insertion_point(NAME)
    // The annotation can have arbitrary text before and after it on the line,
    // which allows it to be placed in a comment.  NAME should be replaced with
    // an identifier naming the point -- this is what other generators will use
    // as the insertion_point.  Code inserted at this point will be placed
    // immediately above the line containing the insertion point (thus multiple
    // insertions to the same point will come out in the order they were added).
    // The double-@ is intended to make it unlikely that the generated code
    // could contain things that look like insertion points by accident.
    //
    // For example, the C++ code generator places the following line in the
    // .pb.h files that it generates:
    //   // @@protoc_insertion_point(namespace_scope)
    // This line appears within the scope of the file's package namespace, but
    // outside of any particular class.  Another plugin can then specify the
    // insertion_point "namespace_scope" to generate additional classes or
    // other declarations that should be placed in this scope.
    //
    // Note that if the line containing the insertion point begins with
    // whitespace, the same whitespace will be added to every line of the
    // inserted text.  This is useful for languages like Python, where
    // indentation matters.  In these languages, the insertion point comment
    // should be indented the same amount as any inserted code will need to be
    // in order to work correctly in that context.
    //
    // The code generator that generates the initial file and the one which
    // inserts into it must both run as part of a single invocation of protoc.
    // Code generators are executed in the order in which they appear on the
    // command line.
    //
    // If |insertion_point| is present, |name| must also be present.
    InsertionPoint *string `protobuf:"bytes,2,opt,name=insertion_point,json=insertionPoint" json:"insertion_point,omitempty"`
    // The file contents.
    Content          *string `protobuf:"bytes,15,opt,name=content" json:"content,omitempty"`
    XXX_unrecognized []byte  `json:"-"`
}

func (*CodeGeneratorResponse_File) Descriptor

func (*CodeGeneratorResponse_File) Descriptor() ([]byte, []int)

func (*CodeGeneratorResponse_File) GetContent

func (m *CodeGeneratorResponse_File) GetContent() string

func (*CodeGeneratorResponse_File) GetInsertionPoint

func (m *CodeGeneratorResponse_File) GetInsertionPoint() string

func (*CodeGeneratorResponse_File) GetName

func (m *CodeGeneratorResponse_File) GetName() string

func (*CodeGeneratorResponse_File) ProtoMessage

func (*CodeGeneratorResponse_File) ProtoMessage()

func (*CodeGeneratorResponse_File) Reset

func (m *CodeGeneratorResponse_File) Reset()

func (*CodeGeneratorResponse_File) String

func (m *CodeGeneratorResponse_File) String() string