Config

• NAME
• SYNOPSIS
• DESCRIPTION
• EXAMPLE
• WARNING
• GLOSSARY
• _
• a
• b
• c
• d
• e
• f
• g
• h
• i
• k
• l
• m
• n
• o
• p
• P
• q
• r
• s
• t
• u
• v
• x
• y
• z
• GIT DATA
• NOTE

NAME

Config - access Perl configuration information

SYNOPSIS

    use Config;
    if ($Config{usethreads}) {
	print "has thread support\n"
    } 
    use Config qw(myconfig config_sh config_vars config_re);
    print myconfig();
    print config_sh();
    print config_re();
    config_vars(qw(osname archname));

DESCRIPTION

The Config module contains all the information that was available to the Configure program at Perl build time (over 900 values).

Shell variables from the config.sh file (written by Configure) are stored in the readonly-variable %Config , indexed by their names.

Values stored in config.sh as 'undef' are returned as undefined values. The perl exists function can be used to check if a named variable exists.

For a description of the variables, please have a look at the Glossary file, as written in the Porting folder, or use the url: https://github.com/Perl/perl5/blob/blead/Porting/Glossary

• myconfig()

  Returns a textual summary of the major perl configuration values. See also -V in Command Switches in perlrun.

• config_sh()

  Returns the entire perl configuration information in the form of the original config.sh shell variable assignment script.

• config_re($regex)

  Like config_sh() but returns, as a list, only the config entries who's names match the $regex.

• config_vars(@names)

  Prints to STDOUT the values of the named configuration variable. Each is printed on a separate line in the form:

    name='value';

  Names which are unknown are output as name='UNKNOWN'; . See also -V:name in Command Switches in perlrun.

• bincompat_options()

  Returns a list of C pre-processor options used when compiling this perl binary, which affect its binary compatibility with extensions. bincompat_options() and non_bincompat_options() are shown together in the output of perl -V as Compile-time options.

• non_bincompat_options()

  Returns a list of C pre-processor options used when compiling this perl binary, which do not affect binary compatibility with extensions.

• compile_date()

  Returns the compile date (as a string), equivalent to what is shown by perl -V

• local_patches()

  Returns a list of the names of locally applied patches, equivalent to what is shown by perl -V .

• header_files()

  Returns a list of the header files that should be used as dependencies for XS code, for this version of Perl on this platform.

EXAMPLE

Here's a more sophisticated example of using %Config:

    use Config;
    use strict;
    my %sig_num;
    my @sig_name;
    unless($Config{sig_name} && $Config{sig_num}) {
	die "No sigs?";
    } else {
	my @names = split ' ', $Config{sig_name};
	@sig_num{@names} = split ' ', $Config{sig_num};
	foreach (@names) {
	    $sig_name[$sig_num{$_}] ||= $_;
	}   
    }
    print "signal #17 = $sig_name[17]\n";
    if ($sig_num{ALRM}) { 
	print "SIGALRM is $sig_num{ALRM}\n";
    }

WARNING

Because this information is not stored within the perl executable itself it is possible (but unlikely) that the information does not relate to the actual perl binary which is being used to access it.

The Config module is installed into the architecture and version specific library directory ($Config{installarchlib}) and it checks the perl version number when loaded.

The values stored in config.sh may be either single-quoted or double-quoted. Double-quoted strings are handy for those cases where you need to include escape sequences in the strings. To avoid runtime variable interpolation, any $ and @ characters are replaced by \$ and \@ , respectively. This isn't foolproof, of course, so don't embed \$ or \@ in double-quoted strings unless you're willing to deal with the consequences. (The slashes will end up escaped and the $ or @ will trigger variable interpolation)

GLOSSARY

Most Config variables are determined by the Configure script on platforms supported by it (which is most UNIX platforms). Some platforms have custom-made Config variables, and may thus not have some of the variables described below, or may have extraneous variables specific to that particular port. See the port specific documentation in such cases.

_

• _a

  From Unix.U:

  This variable defines the extension used for ordinary library files. For unix, it is .a. The . is included. Other possible values include .lib.

• _exe

  From Unix.U:

  This variable defines the extension used for executable files. DJGPP , Cygwin and OS/2 use .exe. Stratus VOS uses .pm. On operating systems which do not require a specific extension for executable files, this variable is empty.

• _o

  From Unix.U:

  This variable defines the extension used for object files. For unix, it is .o. The . is included. Other possible values include .obj.

a

• afs

  From afs.U:

  This variable is set to true if AFS (Andrew File System) is used on the system, false otherwise. It is possible to override this with a hint value or command line option, but you'd better know what you are doing.

• afsroot

  From afs.U:

  This variable is by default set to /afs. In the unlikely case this is not the correct root, it is possible to override this with a hint value or command line option. This will be used in subsequent tests for AFSness in the configure and test process.

• alignbytes

  From alignbytes.U:

  This variable holds the number of bytes required to align a double-- or a long double when applicable. Usual values are 2, 4 and 8. The default is eight, for safety.

• aphostname

  From d_gethname.U:

  This variable contains the command which can be used to compute the host name. The command is fully qualified by its absolute path, to make it safe when used by a process with super-user privileges.

• api_revision

  From patchlevel.U:

  The three variables, api_revision, api_version, and api_subversion, specify the version of the oldest perl binary compatible with the present perl. In a full version string such as 5.6.1, api_revision is the 5 . Prior to 5.5.640, the format was a floating point number, like 5.00563.

  perl.c:incpush() and lib/lib.pm will automatically search in $sitelib/.. for older directories back to the limit specified by these api_ variables. This is only useful if you have a perl library directory tree structured like the default one. See INSTALL for how this works. The versioned site_perl directory was introduced in 5.005, so that is the lowest possible value. The version list appropriate for the current system is determined in inc_version_list.U.

  XXX To do: Since compatibility can depend on compile time options (such as bincompat, longlong, etc.) it should (perhaps) be set by Configure, but currently it isn't. Currently, we read a hard-wired value from patchlevel.h. Perhaps what we ought to do is take the hard-wired value from patchlevel.h but then modify it if the current Configure options warrant. patchlevel.h then would use an #ifdef guard.

• api_subversion

  From patchlevel.U:

  The three variables, api_revision, api_version, and api_subversion, specify the version of the oldest perl binary compatible with the present perl. In a full version string such as 5.6.1, api_subversion is the 1 . See api_revision for full details.

• api_version

  From patchlevel.U:

  The three variables, api_revision, api_version, and api_subversion, specify the version of the oldest perl binary compatible with the present perl. In a full version string such as 5.6.1, api_version is the 6 . See api_revision for full details. As a special case, 5.5.0 is rendered in the old-style as 5.005. (In the 5.005_0x maintenance series, this was the only versioned directory in $sitelib.)

• api_versionstring

  From patchlevel.U:

  This variable combines api_revision, api_version, and api_subversion in a format such as 5.6.1 (or 5_6_1) suitable for use as a directory name. This is filesystem dependent.

• ar

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the ar program. After Configure runs, the value is reset to a plain ar and is not useful.

• archlib

  From archlib.U:

  This variable holds the name of the directory in which the user wants to put architecture-dependent public library files for $package. It is most often a local directory such as /usr/local/lib. Programs using this variable must be prepared to deal with filename expansion.

• archlibexp

  From archlib.U:

  This variable is the same as the archlib variable, but is filename expanded at configuration time, for convenient use.

• archname

  From archname.U:

  This variable is a short name to characterize the current architecture. It is used mainly to construct the default archlib.

• archname64

  From use64bits.U:

  This variable is used for the 64-bitness part of $archname.

• archobjs

  From Unix.U:

  This variable defines any additional objects that must be linked in with the program on this architecture. On unix, it is usually empty. It is typically used to include emulations of unix calls or other facilities. For perl on OS/2, for example, this would include os2/os2.obj.

• asctime_r_proto

  From d_asctime_r.U:

  This variable encodes the prototype of asctime_r. It is zero if d_asctime_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r is defined.

• awk

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the awk program. After Configure runs, the value is reset to a plain awk and is not useful.

b

• baserev

  From baserev.U:

  The base revision level of this package, from the .package file.

• bash

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• bin

  From bin.U:

  This variable holds the name of the directory in which the user wants to put publicly executable images for the package in question. It is most often a local directory such as /usr/local/bin. Programs using this variable must be prepared to deal with ~name substitution.

• bin_ELF

  From dlsrc.U:

  This variable saves the result from configure if generated binaries are in ELF format. Only set to defined when the test has actually been performed, and the result was positive.

• binexp

  From bin.U:

  This is the same as the bin variable, but is filename expanded at configuration time, for use in your makefiles.

• bison

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the bison program. After Configure runs, the value is reset to a plain bison and is not useful.

• byacc

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the byacc program. After Configure runs, the value is reset to a plain byacc and is not useful.

• byteorder

  From byteorder.U:

  This variable holds the byte order in a UV . In the following, larger digits indicate more significance. The variable byteorder is either 4321 on a big-endian machine, or 1234 on a little-endian, or 87654321 on a Cray ... or 3412 with weird order !

c

• c

  From n.U:

  This variable contains the \c string if that is what causes the echo command to suppress newline. Otherwise it is null. Correct usage is $echo $n "prompt for a question: $c".

• castflags

  From d_castneg.U:

  This variable contains a flag that precise difficulties the compiler has casting odd floating values to unsigned long: 0 = ok 1 = couldn't cast < 0 2 = couldn't cast >= 0x80000000 4 = couldn't cast in argument expression list

• cat

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the cat program. After Configure runs, the value is reset to a plain cat and is not useful.

• cc

  From cc.U:

  This variable holds the name of a command to execute a C compiler which can resolve multiple global references that happen to have the same name. Usual values are cc and gcc . Fervent ANSI compilers may be called c89 . AIX has xlc.

• cccdlflags

  From dlsrc.U:

  This variable contains any special flags that might need to be passed with cc -c to compile modules to be used to create a shared library that will be used for dynamic loading. For hpux, this should be +z. It is up to the makefile to use it.

• ccdlflags

  From dlsrc.U:

  This variable contains any special flags that might need to be passed to cc to link with a shared library for dynamic loading. It is up to the makefile to use it. For sunos 4.1, it should be empty.

• ccflags

  From ccflags.U:

  This variable contains any additional C compiler flags desired by the user. It is up to the Makefile to use this.

• ccflags_uselargefiles

  From uselfs.U:

  This variable contains the compiler flags needed by large file builds and added to ccflags by hints files.

• ccname

  From Checkcc.U:

  This can set either by hints files or by Configure. If using gcc, this is gcc, and if not, usually equal to cc, unimpressive, no? Some platforms, however, make good use of this by storing the flavor of the C compiler being used here. For example if using the Sun WorkShop suite, ccname will be workshop .

• ccsymbols

  From Cppsym.U:

  The variable contains the symbols defined by the C compiler alone. The symbols defined by cpp or by cc when it calls cpp are not in this list, see cppsymbols and cppccsymbols. The list is a space-separated list of symbol=value tokens.

• ccversion

  From Checkcc.U:

  This can set either by hints files or by Configure. If using a (non-gcc) vendor cc, this variable may contain a version for the compiler.

• cf_by

  From cf_who.U:

  Login name of the person who ran the Configure script and answered the questions. This is used to tag both config.sh and config_h.SH.

• cf_email

  From cf_email.U:

  Electronic mail address of the person who ran Configure. This can be used by units that require the user's e-mail, like MailList.U.

• cf_time

  From cf_who.U:

  Holds the output of the date command when the configuration file was produced. This is used to tag both config.sh and config_h.SH.

• charbits

  From charsize.U:

  This variable contains the value of the CHARBITS symbol, which indicates to the C program how many bits there are in a character.

• charsize

  From charsize.U:

  This variable contains the value of the CHARSIZE symbol, which indicates to the C program how many bytes there are in a character.

• chgrp

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• chmod

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the chmod program. After Configure runs, the value is reset to a plain chmod and is not useful.

• chown

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• clocktype

  From d_times.U:

  This variable holds the type returned by times(). It can be long, or clock_t on BSD sites (in which case <sys/types.h> should be included).

• comm

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the comm program. After Configure runs, the value is reset to a plain comm and is not useful.

• compress

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• config_arg0

  From Options.U:

  This variable contains the string used to invoke the Configure command, as reported by the shell in the $0 variable.

• config_argc

  From Options.U:

  This variable contains the number of command-line arguments passed to Configure, as reported by the shell in the $# variable. The individual arguments are stored as variables config_arg1, config_arg2, etc.

• config_args

  From Options.U:

  This variable contains a single string giving the command-line arguments passed to Configure. Spaces within arguments, quotes, and escaped characters are not correctly preserved. To reconstruct the command line, you must assemble the individual command line pieces, given in config_arg[0-9]*.

• contains

  From contains.U:

  This variable holds the command to do a grep with a proper return status. On most sane systems it is simply grep. On insane systems it is a grep followed by a cat followed by a test. This variable is primarily for the use of other Configure units.

• cp

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the cp program. After Configure runs, the value is reset to a plain cp and is not useful.

• cpio

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• cpp

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the cpp program. After Configure runs, the value is reset to a plain cpp and is not useful.

• cpp_stuff

  From cpp_stuff.U:

  This variable contains an identification of the concatenation mechanism used by the C preprocessor.

• cppccsymbols

  From Cppsym.U:

  The variable contains the symbols defined by the C compiler when it calls cpp. The symbols defined by the cc alone or cpp alone are not in this list, see ccsymbols and cppsymbols. The list is a space-separated list of symbol=value tokens.

• cppflags

  From ccflags.U:

  This variable holds the flags that will be passed to the C pre- processor. It is up to the Makefile to use it.

• cpplast

  From cppstdin.U:

  This variable has the same functionality as cppminus, only it applies to cpprun and not cppstdin.

• cppminus

  From cppstdin.U:

  This variable contains the second part of the string which will invoke the C preprocessor on the standard input and produce to standard output. This variable will have the value - if cppstdin needs a minus to specify standard input, otherwise the value is "".

• cpprun

  From cppstdin.U:

  This variable contains the command which will invoke a C preprocessor on standard input and put the output to stdout. It is guaranteed not to be a wrapper and may be a null string if no preprocessor can be made directly available. This preprocessor might be different from the one used by the C compiler. Don't forget to append cpplast after the preprocessor options.

• cppstdin

  From cppstdin.U:

  This variable contains the command which will invoke the C preprocessor on standard input and put the output to stdout. It is primarily used by other Configure units that ask about preprocessor symbols.

• cppsymbols

  From Cppsym.U:

  The variable contains the symbols defined by the C preprocessor alone. The symbols defined by cc or by cc when it calls cpp are not in this list, see ccsymbols and cppccsymbols. The list is a space-separated list of symbol=value tokens.

• crypt_r_proto

  From d_crypt_r.U:

  This variable encodes the prototype of crypt_r. It is zero if d_crypt_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r is defined.

• cryptlib

  From d_crypt.U:

  This variable holds -lcrypt or the path to a libcrypt.a archive if the crypt() function is not defined in the standard C library. It is up to the Makefile to use this.

• csh

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the csh program. After Configure runs, the value is reset to a plain csh and is not useful.

• ctermid_r_proto

  From d_ctermid_r.U:

  This variable encodes the prototype of ctermid_r. It is zero if d_ctermid_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r is defined.

• ctime_r_proto

  From d_ctime_r.U:

  This variable encodes the prototype of ctime_r. It is zero if d_ctime_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r is defined.

d

• d__fwalk

  From d__fwalk.U:

  This variable conditionally defines HAS__FWALK if _fwalk() is available to apply a function to all the file handles.

• d_accept4

  From d_accept4.U:

  This variable conditionally defines HAS_ACCEPT4 if accept4() is available to accept socket connections.

• d_access

  From d_access.U:

  This variable conditionally defines HAS_ACCESS if the access() system call is available to check for access permissions using real IDs.

• d_accessx

  From d_accessx.U:

  This variable conditionally defines the HAS_ACCESSX symbol, which indicates to the C program that the accessx() routine is available.

• d_acosh

  From d_acosh.U:

  This variable conditionally defines the HAS_ACOSH symbol, which indicates to the C program that the acosh() routine is available.

• d_aintl

  From d_aintl.U:

  This variable conditionally defines the HAS_AINTL symbol, which indicates to the C program that the aintl() routine is available. If copysignl is also present we can emulate modfl.

• d_alarm

  From d_alarm.U:

  This variable conditionally defines the HAS_ALARM symbol, which indicates to the C program that the alarm() routine is available.

• d_archlib

  From archlib.U:

  This variable conditionally defines ARCHLIB to hold the pathname of architecture-dependent library files for $package. If $archlib is the same as $privlib, then this is set to undef.

• d_asctime64

  From d_timefuncs64.U:

  This variable conditionally defines the HAS_ASCTIME64 symbol, which indicates to the C program that the asctime64 () routine is available.

• d_asctime_r

  From d_asctime_r.U:

  This variable conditionally defines the HAS_ASCTIME_R symbol, which indicates to the C program that the asctime_r() routine is available.

• d_asinh

  From d_asinh.U:

  This variable conditionally defines the HAS_ASINH symbol, which indicates to the C program that the asinh() routine is available.

• d_atanh

  From d_atanh.U:

  This variable conditionally defines the HAS_ATANH symbol, which indicates to the C program that the atanh() routine is available.

• d_atolf

  From atolf.U:

  This variable conditionally defines the HAS_ATOLF symbol, which indicates to the C program that the atolf() routine is available.

• d_atoll

  From atoll.U:

  This variable conditionally defines the HAS_ATOLL symbol, which indicates to the C program that the atoll() routine is available.

• d_attribute_deprecated

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_DEPRECATED , which indicates that GCC can handle the attribute for marking deprecated APIs

• d_attribute_format

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_FORMAT , which indicates the C compiler can check for printf-like formats.

• d_attribute_malloc

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_MALLOC , which indicates the C compiler can understand functions as having malloc-like semantics.

• d_attribute_nonnull

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_NONNULL , which indicates that the C compiler can know that certain arguments must not be NULL , and will check accordingly at compile time.

• d_attribute_noreturn

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_NORETURN , which indicates that the C compiler can know that certain functions are guaranteed never to return.

• d_attribute_pure

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_PURE , which indicates that the C compiler can know that certain functions are pure functions, meaning that they have no side effects, and only rely on function input and/or global data for their results.

• d_attribute_unused

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_UNUSED , which indicates that the C compiler can know that certain variables and arguments may not always be used, and to not throw warnings if they don't get used.

• d_attribute_warn_unused_result

  From d_attribut.U:

  This variable conditionally defines HASATTRIBUTE_WARN_UNUSED_RESULT , which indicates that the C compiler can know that certain functions have a return values that must not be ignored, such as malloc() or open().

• d_backtrace

  From d_backtrace.U:

  This variable conditionally defines the HAS_BACKTRACE symbol, which indicates to the C program that the backtrace() routine is available to get a stack trace.

• d_bsd

  From Guess.U:

  This symbol conditionally defines the symbol BSD when running on a BSD system.

• d_bsdgetpgrp

  From d_getpgrp.U:

  This variable conditionally defines USE_BSD_GETPGRP if getpgrp needs one arguments whereas USG one needs none.

• d_bsdsetpgrp

  From d_setpgrp.U:

  This variable conditionally defines USE_BSD_SETPGRP if setpgrp needs two arguments whereas USG one needs none. See also d_setpgid for a POSIX interface.

• d_builtin_add_overflow

  From d_builtin_overflow.U:

  This variable conditionally defines HAS_BUILTIN_ADD_OVERFLOW , which indicates that the compiler supports __builtin_add_overflow(x,y,&z) for safely adding x and y into z while checking for overflow.

• d_builtin_choose_expr

  From d_builtin.U:

  This conditionally defines HAS_BUILTIN_CHOOSE_EXPR , which indicates that the compiler supports __builtin_choose_expr(x,y,z). This built-in function is analogous to the x?y:z operator in C, except that the expression returned has its type unaltered by promotion rules. Also, the built-in function does not evaluate the expression that was not chosen.

• d_builtin_expect

  From d_builtin.U:

  This conditionally defines HAS_BUILTIN_EXPECT , which indicates that the compiler supports __builtin_expect(exp,c). You may use __builtin_expect to provide the compiler with branch prediction information.

• d_builtin_mul_overflow

  From d_builtin_overflow.U:

  This variable conditionally defines HAS_BUILTIN_MUL_OVERFLOW , which indicates that the compiler supports __builtin_mul_overflow(x,y,&z) for safely multiplying x and y into z while checking for overflow.

• d_builtin_sub_overflow

  From d_builtin_overflow.U:

  This variable conditionally defines HAS_BUILTIN_SUB_OVERFLOW , which indicates that the compiler supports __builtin_sub_overflow(x,y,&z) for safely subtracting y from x into z while checking for overflow.

• d_c99_variadic_macros

  From d_c99_variadic.U:

  This variable conditionally defines the HAS_C99_VARIADIC_MACROS symbol, which indicates to the C program that C99 variadic macros are available.

• d_casti32

  From d_casti32.U:

  This variable conditionally defines CASTI32, which indicates whether the C compiler can cast large floats to 32-bit ints.

• d_castneg

  From d_castneg.U:

  This variable conditionally defines CASTNEG , which indicates whether the C compiler can cast negative float to unsigned.

• d_cbrt

  From d_cbrt.U:

  This variable conditionally defines the HAS_CBRT symbol, which indicates to the C program that the cbrt() (cube root) function is available.

• d_chown

  From d_chown.U:

  This variable conditionally defines the HAS_CHOWN symbol, which indicates to the C program that the chown() routine is available.

• d_chroot

  From d_chroot.U:

  This variable conditionally defines the HAS_CHROOT symbol, which indicates to the C program that the chroot() routine is available.

• d_chsize

  From d_chsize.U:

  This variable conditionally defines the CHSIZE symbol, which indicates to the C program that the chsize() routine is available to truncate files. You might need a -lx to get this routine.

• d_class

  From d_class.U:

  This variable conditionally defines the HAS_CLASS symbol, which indicates to the C program that the class() routine is available.

• d_clearenv

  From d_clearenv.U:

  This variable conditionally defines the HAS_CLEARENV symbol, which indicates to the C program that the clearenv () routine is available.

• d_closedir

  From d_closedir.U:

  This variable conditionally defines HAS_CLOSEDIR if closedir() is available.

• d_cmsghdr_s

  From d_cmsghdr_s.U:

  This variable conditionally defines the HAS_STRUCT_CMSGHDR symbol, which indicates that the struct cmsghdr is supported.

• d_copysign

  From d_copysign.U:

  This variable conditionally defines the HAS_COPYSIGN symbol, which indicates to the C program that the copysign() routine is available.

• d_copysignl

  From d_copysignl.U:

  This variable conditionally defines the HAS_COPYSIGNL symbol, which indicates to the C program that the copysignl() routine is available. If aintl is also present we can emulate modfl.

• d_cplusplus

  From d_cplusplus.U:

  This variable conditionally defines the USE_CPLUSPLUS symbol, which indicates that a C++ compiler was used to compiled Perl and will be used to compile extensions.

• d_crypt

  From d_crypt.U:

  This variable conditionally defines the CRYPT symbol, which indicates to the C program that the crypt() routine is available to encrypt passwords and the like.

• d_crypt_r

  From d_crypt_r.U:

  This variable conditionally defines the HAS_CRYPT_R symbol, which indicates to the C program that the crypt_r() routine is available.

• d_csh

  From d_csh.U:

  This variable conditionally defines the CSH symbol, which indicates to the C program that the C-shell exists.

• d_ctermid

  From d_ctermid.U:

  This variable conditionally defines CTERMID if ctermid() is available to generate filename for terminal.

• d_ctermid_r

  From d_ctermid_r.U:

  This variable conditionally defines the HAS_CTERMID_R symbol, which indicates to the C program that the ctermid_r() routine is available.

• d_ctime64

  From d_timefuncs64.U:

  This variable conditionally defines the HAS_CTIME64 symbol, which indicates to the C program that the ctime64 () routine is available.

• d_ctime_r

  From d_ctime_r.U:

  This variable conditionally defines the HAS_CTIME_R symbol, which indicates to the C program that the ctime_r() routine is available.

• d_cuserid

  From d_cuserid.U:

  This variable conditionally defines the HAS_CUSERID symbol, which indicates to the C program that the cuserid() routine is available to get character login names.

• d_dbminitproto

  From d_dbminitproto.U:

  This variable conditionally defines the HAS_DBMINIT_PROTO symbol, which indicates to the C program that the system provides a prototype for the dbminit() function. Otherwise, it is up to the program to supply one.

• d_difftime

  From d_difftime.U:

  This variable conditionally defines the HAS_DIFFTIME symbol, which indicates to the C program that the difftime() routine is available.

• d_difftime64

  From d_timefuncs64.U:

  This variable conditionally defines the HAS_DIFFTIME64 symbol, which indicates to the C program that the difftime64 () routine is available.

• d_dir_dd_fd

  From d_dir_dd_fd.U:

  This variable conditionally defines the HAS_DIR_DD_FD symbol, which indicates that the DIR directory stream type contains a member variable called dd_fd.

• d_dirfd

  From d_dirfd.U:

  This variable conditionally defines the HAS_DIRFD constant, which indicates to the C program that dirfd() is available to return the file descriptor of a directory stream.

• d_dirnamlen

  From i_dirent.U:

  This variable conditionally defines DIRNAMLEN , which indicates to the C program that the length of directory entry names is provided by a d_namelen field.

• d_dladdr

  From d_dladdr.U:

  This variable conditionally defines the HAS_DLADDR symbol, which indicates to the C program that the dladdr() routine is available to get a stack trace.

• d_dlerror

  From d_dlerror.U:

  This variable conditionally defines the HAS_DLERROR symbol, which indicates to the C program that the dlerror() routine is available.

• d_dlopen

  From d_dlopen.U:

  This variable conditionally defines the HAS_DLOPEN symbol, which indicates to the C program that the dlopen() routine is available.

• d_dlsymun

  From d_dlsymun.U:

  This variable conditionally defines DLSYM_NEEDS_UNDERSCORE , which indicates that we need to prepend an underscore to the symbol name before calling dlsym().

• d_dosuid

  From d_dosuid.U:

  This variable conditionally defines the symbol DOSUID , which tells the C program that it should insert setuid emulation code on hosts which have setuid #! scripts disabled.

• d_double_has_inf

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_HAS_INF which indicates that the double type has an infinity.

• d_double_has_nan

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_HAS_NAN which indicates that the double type has a not-a-number.

• d_double_has_negative_zero

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_HAS_NEGATIVE_ZERO which indicates that the double type has a negative zero.

• d_double_has_subnormals

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_HAS_SUBNORMALS which indicates that the double type has subnormals (denormals).

• d_double_style_cray

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_STYLE_CRAY which indicates that the double is the 64-bit CRAY mainframe format.

• d_double_style_ibm

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_STYLE_IBM , which indicates that the double is the 64-bit IBM mainframe format.

• d_double_style_ieee

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_STYLE_IEEE , which indicates that the double is the 64-bit IEEE 754.

• d_double_style_vax

  From longdblfio.U:

  This variable conditionally defines the symbol DOUBLE_STYLE_VAX , which indicates that the double is the 64-bit VAX format D or G.

• d_drand48_r

  From d_drand48_r.U:

  This variable conditionally defines the HAS_DRAND48_R symbol, which indicates to the C program that the drand48_r() routine is available.

• d_drand48proto

  From d_drand48proto.U:

  This variable conditionally defines the HAS_DRAND48_PROTO symbol, which indicates to the C program that the system provides a prototype for the drand48() function. Otherwise, it is up to the program to supply one.

• d_dup2

  From d_dup2.U:

  This variable conditionally defines HAS_DUP2 if dup2() is available to duplicate file descriptors.

• d_dup3

  From d_dup3.U:

  This variable conditionally defines HAS_DUP3 if dup3() is available to duplicate file descriptors.

• d_duplocale

  From d_newlocale.U:

  This variable conditionally defines the HAS_DUPLOCALE symbol, which indicates to the C program that the duplocale() routine is available to duplicate a locale object.

• d_eaccess

  From d_eaccess.U:

  This variable conditionally defines the HAS_EACCESS symbol, which indicates to the C program that the eaccess() routine is available.

• d_endgrent

  From d_endgrent.U:

  This variable conditionally defines the HAS_ENDGRENT symbol, which indicates to the C program that the endgrent() routine is available for sequential access of the group database.

• d_endgrent_r

  From d_endgrent_r.U:

  This variable conditionally defines the HAS_ENDGRENT_R symbol, which indicates to the C program that the endgrent_r() routine is available.

• d_endhent

  From d_endhent.U:

  This variable conditionally defines HAS_ENDHOSTENT if endhostent() is available to close whatever was being used for host queries.

• d_endhostent_r

  From d_endhostent_r.U:

  This variable conditionally defines the HAS_ENDHOSTENT_R symbol, which indicates to the C program that the endhostent_r() routine is available.

• d_endnent

  From d_endnent.U:

  This variable conditionally defines HAS_ENDNETENT if endnetent() is available to close whatever was being used for network queries.

• d_endnetent_r

  From d_endnetent_r.U:

  This variable conditionally defines the HAS_ENDNETENT_R symbol, which indicates to the C program that the endnetent_r() routine is available.

• d_endpent

  From d_endpent.U:

  This variable conditionally defines HAS_ENDPROTOENT if endprotoent() is available to close whatever was being used for protocol queries.

• d_endprotoent_r

  From d_endprotoent_r.U:

  This variable conditionally defines the HAS_ENDPROTOENT_R symbol, which indicates to the C program that the endprotoent_r() routine is available.

• d_endpwent

  From d_endpwent.U:

  This variable conditionally defines the HAS_ENDPWENT symbol, which indicates to the C program that the endpwent() routine is available for sequential access of the passwd database.

• d_endpwent_r

  From d_endpwent_r.U:

  This variable conditionally defines the HAS_ENDPWENT_R symbol, which indicates to the C program that the endpwent_r() routine is available.

• d_endsent

  From d_endsent.U:

  This variable conditionally defines HAS_ENDSERVENT if endservent() is available to close whatever was being used for service queries.

• d_endservent_r

  From d_endservent_r.U:

  This variable conditionally defines the HAS_ENDSERVENT_R symbol, which indicates to the C program that the endservent_r() routine is available.

• d_eofnblk

  From nblock_io.U:

  This variable conditionally defines EOF_NONBLOCK if EOF can be seen when reading from a non-blocking I/O source.

• d_erf

  From d_erf.U:

  This variable conditionally defines the HAS_ERF symbol, which indicates to the C program that the erf() routine is available.

• d_erfc

  From d_erfc.U:

  This variable conditionally defines the HAS_ERFC symbol, which indicates to the C program that the erfc() routine is available.

• d_eunice

  From Guess.U:

  This variable conditionally defines the symbols EUNICE and VAX , which alerts the C program that it must deal with idiosyncrasies of VMS .

• d_exp2

  From d_exp2.U:

  This variable conditionally defines the HAS_EXP2 symbol, which indicates to the C program that the exp2() routine is available.

• d_expm1

  From d_expm1.U:

  This variable conditionally defines the HAS_EXPM1 symbol, which indicates to the C program that the expm1() routine is available.

• d_faststdio

  From d_faststdio.U:

  This variable conditionally defines the HAS_FAST_STDIO symbol, which indicates to the C program that the "fast stdio" is available to manipulate the stdio buffers directly.

• d_fchdir

  From d_fchdir.U:

  This variable conditionally defines the HAS_FCHDIR symbol, which indicates to the C program that the fchdir() routine is available.

• d_fchmod

  From d_fchmod.U:

  This variable conditionally defines the HAS_FCHMOD symbol, which indicates to the C program that the fchmod() routine is available to change mode of opened files.

• d_fchmodat

  From d_fsat.U:

  This variable conditionally defines the HAS_FCHMODAT symbol, which indicates the POSIX fchmodat() function is available.

• d_fchown

  From d_fchown.U:

  This variable conditionally defines the HAS_FCHOWN symbol, which indicates to the C program that the fchown() routine is available to change ownership of opened files.

• d_fcntl

  From d_fcntl.U:

  This variable conditionally defines the HAS_FCNTL symbol, and indicates whether the fcntl() function exists

• d_fcntl_can_lock

  From d_fcntl_can_lock.U:

  This variable conditionally defines the FCNTL_CAN_LOCK symbol and indicates whether file locking with fcntl() works.

• d_fd_macros

  From d_fd_set.U:

  This variable contains the eventual value of the HAS_FD_MACROS symbol, which indicates if your C compiler knows about the macros which manipulate an fd_set.

• d_fd_set

  From d_fd_set.U:

  This variable contains the eventual value of the HAS_FD_SET symbol, which indicates if your C compiler knows about the fd_set typedef.

• d_fdclose

  From d_fdclose.U:

  This variable conditionally defines the HAS_FDCLOSE symbol, which indicates to the C program that the fdclose() routine is available.

• d_fdim

  From d_fdim.U:

  This variable conditionally defines the HAS_FDIM symbol, which indicates to the C program that the fdim() routine is available.

• d_fds_bits

  From d_fd_set.U:

  This variable contains the eventual value of the HAS_FDS_BITS symbol, which indicates if your fd_set typedef contains the fds_bits member. If you have an fd_set typedef, but the dweebs who installed it did a half-fast job and neglected to provide the macros to manipulate an fd_set, HAS_FDS_BITS will let us know how to fix the gaffe.

• d_fegetround

  From d_fegetround.U:

  This variable conditionally defines HAS_FEGETROUND if fegetround() is available to get the floating point rounding mode.

• d_fgetpos

  From d_fgetpos.U:

  This variable conditionally defines HAS_FGETPOS if fgetpos() is available to get the file position indicator.

• d_finite

  From d_finite.U:

  This variable conditionally defines the HAS_FINITE symbol, which indicates to the C program that the finite() routine is available.

• d_finitel

  From d_finitel.U:

  This variable conditionally defines the HAS_FINITEL symbol, which indicates to the C program that the finitel() routine is available.

• d_flexfnam

  From d_flexfnam.U:

  This variable conditionally defines the FLEXFILENAMES symbol, which indicates that the system supports filenames longer than 14 characters.

• d_flock

  From d_flock.U:

  This variable conditionally defines HAS_FLOCK if flock() is available to do file locking.

• d_flockproto

  From d_flockproto.U:

  This variable conditionally defines the HAS_FLOCK_PROTO symbol, which indicates to the C program that the system provides a prototype for the flock() function. Otherwise, it is up to the program to supply one.

• d_fma

  From d_fma.U:

  This variable conditionally defines the HAS_FMA symbol, which indicates to the C program that the fma() routine is available.

• d_fmax

  From d_fmax.U:

  This variable conditionally defines the HAS_FMAX symbol, which indicates to the C program that the fmax() routine is available.

• d_fmin

  From d_fmin.U:

  This variable conditionally defines the HAS_FMIN symbol, which indicates to the C program that the fmin() routine is available.

• d_fork

  From d_fork.U:

  This variable conditionally defines the HAS_FORK symbol, which indicates to the C program that the fork() routine is available.

• d_fp_class

  From d_fp_class.U:

  This variable conditionally defines the HAS_FP_CLASS symbol, which indicates to the C program that the fp_class() routine is available.

• d_fp_classify

  From d_fpclassify.U:

  This variable conditionally defines the HAS_FP_CLASSIFY symbol, which indicates to the C program that the fp_classify() routine is available.

• d_fp_classl

  From d_fp_classl.U:

  This variable conditionally defines the HAS_FP_CLASSL symbol, which indicates to the C program that the fp_classl() routine is available.

• d_fpathconf

  From d_pathconf.U:

  This variable conditionally defines the HAS_FPATHCONF symbol, which indicates to the C program that the pathconf() routine is available to determine file-system related limits and options associated with a given open file descriptor.

• d_fpclass

  From d_fpclass.U:

  This variable conditionally defines the HAS_FPCLASS symbol, which indicates to the C program that the fpclass() routine is available.

• d_fpclassify

  From d_fpclassify.U:

  This variable conditionally defines the HAS_FPCLASSIFY symbol, which indicates to the C program that the fpclassify() routine is available.

• d_fpclassl

  From d_fpclassl.U:

  This variable conditionally defines the HAS_FPCLASSL symbol, which indicates to the C program that the fpclassl() routine is available.

• d_fpgetround

  From d_fpgetround.U:

  This variable conditionally defines HAS_FPGETROUND if fpgetround() is available to get the floating point rounding mode.

• d_fpos64_t

  From d_fpos64_t.U:

  This symbol will be defined if the C compiler supports fpos64_t.

• d_freelocale

  From d_newlocale.U:

  This variable conditionally defines the HAS_FREELOCALE symbol, which indicates to the C program that the freelocale() routine is available to deallocates the resources associated with a locale object.

• d_frexpl

  From d_frexpl.U:

  This variable conditionally defines the HAS_FREXPL symbol, which indicates to the C program that the frexpl() routine is available.

• d_fs_data_s

  From d_fs_data_s.U:

  This variable conditionally defines the HAS_STRUCT_FS_DATA symbol, which indicates that the struct fs_data is supported.

• d_fseeko

  From d_fseeko.U:

  This variable conditionally defines the HAS_FSEEKO symbol, which indicates to the C program that the fseeko() routine is available.

• d_fsetpos

  From d_fsetpos.U:

  This variable conditionally defines HAS_FSETPOS if fsetpos() is available to set the file position indicator.

• d_fstatfs

  From d_fstatfs.U:

  This variable conditionally defines the HAS_FSTATFS symbol, which indicates to the C program that the fstatfs() routine is available.

• d_fstatvfs

  From d_statvfs.U:

  This variable conditionally defines the HAS_FSTATVFS symbol, which indicates to the C program that the fstatvfs() routine is available.

• d_fsync

  From d_fsync.U:

  This variable conditionally defines the HAS_FSYNC symbol, which indicates to the C program that the fsync() routine is available.

• d_ftello

  From d_ftello.U:

  This variable conditionally defines the HAS_FTELLO symbol, which indicates to the C program that the ftello() routine is available.

• d_ftime

  From d_ftime.U:

  This variable conditionally defines the HAS_FTIME symbol, which indicates that the ftime() routine exists. The ftime() routine is basically a sub-second accuracy clock.

• d_futimes

  From d_futimes.U:

  This variable conditionally defines the HAS_FUTIMES symbol, which indicates to the C program that the futimes() routine is available.

• d_gai_strerror

  From d_gai_strerror.U:

  This variable conditionally defines the HAS_GAI_STRERROR symbol if the gai_strerror() routine is available and can be used to translate error codes returned by getaddrinfo() into human readable strings.

• d_Gconvert

  From d_gconvert.U:

  This variable holds what Gconvert is defined as to convert floating point numbers into strings. By default, Configure sets this macro to use the first of gconvert, gcvt, or sprintf that pass sprintf-%g-like behavior tests. If perl is using long doubles, the macro uses the first of the following functions that pass Configure's tests: qgcvt, sprintf (if Configure knows how to make sprintf format long doubles--see sPRIgldbl), gconvert, gcvt, and sprintf (casting to double). The gconvert_preference and gconvert_ld_preference variables can be used to alter Configure's preferences, for doubles and long doubles, respectively. If present, they contain a space-separated list of one or more of the above function names in the order they should be tried.

  d_Gconvert may be set to override Configure with a platform- specific function. If this function expects a double, a different value may need to be set by the uselongdouble.cbu call-back unit so that long doubles can be formatted without loss of precision.

• d_gdbm_ndbm_h_uses_prototypes

  From i_ndbm.U:

  This variable conditionally defines the NDBM_H_USES_PROTOTYPES symbol, which indicates that the gdbm-ndbm.h include file uses real ANSI C prototypes instead of K&R style function declarations. K&R style declarations are unsupported in C++, so the include file requires special handling when using a C++ compiler and this variable is undefined. Consult the different d_*ndbm_h_uses_prototypes variables to get the same information for alternative ndbm.h include files.

• d_gdbmndbm_h_uses_prototypes

  From i_ndbm.U:

  This variable conditionally defines the NDBM_H_USES_PROTOTYPES symbol, which indicates that the gdbm/ndbm.h include file uses real ANSI C prototypes instead of K&R style function declarations. K&R style declarations are unsupported in C++, so the include file requires special handling when using a C++ compiler and this variable is undefined. Consult the different d_*ndbm_h_uses_prototypes variables to get the same information for alternative ndbm.h include files.

• d_getaddrinfo

  From d_getaddrinfo.U:

  This variable conditionally defines the HAS_GETADDRINFO symbol, which indicates to the C program that the getaddrinfo() function is available.

• d_getcwd

  From d_getcwd.U:

  This variable conditionally defines the HAS_GETCWD symbol, which indicates to the C program that the getcwd() routine is available to get the current working directory.

• d_getespwnam

  From d_getespwnam.U:

  This variable conditionally defines HAS_GETESPWNAM if getespwnam() is available to retrieve enhanced (shadow) password entries by name.

• d_getfsstat

  From d_getfsstat.U:

  This variable conditionally defines the HAS_GETFSSTAT symbol, which indicates to the C program that the getfsstat() routine is available.

• d_getgrent

  From d_getgrent.U:

  This variable conditionally defines the HAS_GETGRENT symbol, which indicates to the C program that the getgrent() routine is available for sequential access of the group database.

• d_getgrent_r

  From d_getgrent_r.U:

  This variable conditionally defines the HAS_GETGRENT_R symbol, which indicates to the C program that the getgrent_r() routine is available.

• d_getgrgid_r

  From d_getgrgid_r.U:

  This variable conditionally defines the HAS_GETGRGID_R symbol, which indicates to the C program that the getgrgid_r() routine is available.

• d_getgrnam_r

  From d_getgrnam_r.U:

  This variable conditionally defines the HAS_GETGRNAM_R symbol, which indicates to the C program that the getgrnam_r() routine is available.

• d_getgrps

  From d_getgrps.U:

  This variable conditionally defines the HAS_GETGROUPS symbol, which indicates to the C program that the getgroups() routine is available to get the list of process groups.

• d_gethbyaddr

  From d_gethbyad.U:

  This variable conditionally defines the HAS_GETHOSTBYADDR symbol, which indicates to the C program that the gethostbyaddr() routine is available to look up hosts by their IP addresses.

• d_gethbyname

  From d_gethbynm.U:

  This variable conditionally defines the HAS_GETHOSTBYNAME symbol, which indicates to the C program that the gethostbyname() routine is available to look up host names in some data base or other.

• d_gethent

  From d_gethent.U:

  This variable conditionally defines HAS_GETHOSTENT if gethostent() is available to look up host names in some data base or another.

• d_gethname

  From d_gethname.U:

  This variable conditionally defines the HAS_GETHOSTNAME symbol, which indicates to the C program that the gethostname() routine may be used to derive the host name.

• d_gethostbyaddr_r

  From d_gethostbyaddr_r.U:

  This variable conditionally defines the HAS_GETHOSTBYADDR_R symbol, which indicates to the C program that the gethostbyaddr_r() routine is available.

• d_gethostbyname_r

  From d_gethostbyname_r.U:

  This variable conditionally defines the HAS_GETHOSTBYNAME_R symbol, which indicates to the C program that the gethostbyname_r() routine is available.

• d_gethostent_r

  From d_gethostent_r.U:

  This variable conditionally defines the HAS_GETHOSTENT_R symbol, which indicates to the C program that the gethostent_r() routine is available.

• d_gethostprotos

  From d_gethostprotos.U:

  This variable conditionally defines the HAS_GETHOST_PROTOS symbol, which indicates to the C program that <netdb.h> supplies prototypes for the various gethost*() functions. See also netdbtype.U for probing for various netdb types.

• d_getitimer

  From d_getitimer.U:

  This variable conditionally defines the HAS_GETITIMER symbol, which indicates to the C program that the getitimer() routine is available.

• d_getlogin

  From d_getlogin.U:

  This variable conditionally defines the HAS_GETLOGIN symbol, which indicates to the C program that the getlogin() routine is available to get the login name.

• d_getlogin_r

  From d_getlogin_r.U:

  This variable conditionally defines the HAS_GETLOGIN_R symbol, which indicates to the C program that the getlogin_r() routine is available.

• d_getmnt

  From d_getmnt.U:

  This variable conditionally defines the HAS_GETMNT symbol, which indicates to the C program that the getmnt() routine is available to retrieve one or more mount info blocks by filename.

• d_getmntent

  From d_getmntent.U:

  This variable conditionally defines the HAS_GETMNTENT symbol, which indicates to the C program that the getmntent() routine is available to iterate through mounted files to get their mount info.

• d_getnameinfo

  From d_getnameinfo.U:

  This variable conditionally defines the HAS_GETNAMEINFO symbol, which indicates to the C program that the getnameinfo() function is available.

• d_getnbyaddr

  From d_getnbyad.U:

  This variable conditionally defines the HAS_GETNETBYADDR symbol, which indicates to the C program that the getnetbyaddr() routine is available to look up networks by their IP addresses.

• d_getnbyname

  From d_getnbynm.U:

  This variable conditionally defines the HAS_GETNETBYNAME symbol, which indicates to the C program that the getnetbyname() routine is available to look up networks by their names.

• d_getnent

  From d_getnent.U:

  This variable conditionally defines HAS_GETNETENT if getnetent() is available to look up network names in some data base or another.

• d_getnetbyaddr_r

  From d_getnetbyaddr_r.U:

  This variable conditionally defines the HAS_GETNETBYADDR_R symbol, which indicates to the C program that the getnetbyaddr_r() routine is available.

• d_getnetbyname_r

  From d_getnetbyname_r.U:

  This variable conditionally defines the HAS_GETNETBYNAME_R symbol, which indicates to the C program that the getnetbyname_r() routine is available.

• d_getnetent_r

  From d_getnetent_r.U:

  This variable conditionally defines the HAS_GETNETENT_R symbol, which indicates to the C program that the getnetent_r() routine is available.

• d_getnetprotos

  From d_getnetprotos.U:

  This variable conditionally defines the HAS_GETNET_PROTOS symbol, which indicates to the C program that <netdb.h> supplies prototypes for the various getnet*() functions. See also netdbtype.U for probing for various netdb types.

• d_getpagsz

  From d_getpagsz.U:

  This variable conditionally defines HAS_GETPAGESIZE if getpagesize() is available to get the system page size.

• d_getpbyname

  From d_getprotby.U:

  This variable conditionally defines the HAS_GETPROTOBYNAME symbol, which indicates to the C program that the getprotobyname() routine is available to look up protocols by their name.

• d_getpbynumber

  From d_getprotby.U:

  This variable conditionally defines the HAS_GETPROTOBYNUMBER symbol, which indicates to the C program that the getprotobynumber() routine is available to look up protocols by their number.

• d_getpent

  From d_getpent.U:

  This variable conditionally defines HAS_GETPROTOENT if getprotoent() is available to look up protocols in some data base or another.

• d_getpgid

  From d_getpgid.U:

  This variable conditionally defines the HAS_GETPGID symbol, which indicates to the C program that the getpgid(pid) function is available to get the process group id.

• d_getpgrp

  From d_getpgrp.U:

  This variable conditionally defines HAS_GETPGRP if getpgrp() is available to get the current process group.

• d_getpgrp2

  From d_getpgrp2.U:

  This variable conditionally defines the HAS_GETPGRP2 symbol, which indicates to the C program that the getpgrp2() (as in DG/UX ) routine is available to get the current process group.

• d_getppid

  From d_getppid.U:

  This variable conditionally defines the HAS_GETPPID symbol, which indicates to the C program that the getppid() routine is available to get the parent process ID .

• d_getprior

  From d_getprior.U:

  This variable conditionally defines HAS_GETPRIORITY if getpriority() is available to get a process's priority.

• d_getprotobyname_r

  From d_getprotobyname_r.U:

  This variable conditionally defines the HAS_GETPROTOBYNAME_R symbol, which indicates to the C program that the getprotobyname_r() routine is available.

• d_getprotobynumber_r

  From d_getprotobynumber_r.U:

  This variable conditionally defines the HAS_GETPROTOBYNUMBER_R symbol, which indicates to the C program that the getprotobynumber_r() routine is available.

• d_getprotoent_r

  From d_getprotoent_r.U:

  This variable conditionally defines the HAS_GETPROTOENT_R symbol, which indicates to the C program that the getprotoent_r() routine is available.

• d_getprotoprotos

  From d_getprotoprotos.U:

  This variable conditionally defines the HAS_GETPROTO_PROTOS symbol, which indicates to the C program that <netdb.h> supplies prototypes for the various getproto*() functions. See also netdbtype.U for probing for various netdb types.

• d_getprpwnam

  From d_getprpwnam.U:

  This variable conditionally defines HAS_GETPRPWNAM if getprpwnam() is available to retrieve protected (shadow) password entries by name.

• d_getpwent

  From d_getpwent.U:

  This variable conditionally defines the HAS_GETPWENT symbol, which indicates to the C program that the getpwent() routine is available for sequential access of the passwd database.

• d_getpwent_r

  From d_getpwent_r.U:

  This variable conditionally defines the HAS_GETPWENT_R symbol, which indicates to the C program that the getpwent_r() routine is available.

• d_getpwnam_r

  From d_getpwnam_r.U:

  This variable conditionally defines the HAS_GETPWNAM_R symbol, which indicates to the C program that the getpwnam_r() routine is available.

• d_getpwuid_r

  From d_getpwuid_r.U:

  This variable conditionally defines the HAS_GETPWUID_R symbol, which indicates to the C program that the getpwuid_r() routine is available.

• d_getsbyname

  From d_getsrvby.U:

  This variable conditionally defines the HAS_GETSERVBYNAME symbol, which indicates to the C program that the getservbyname() routine is available to look up services by their name.

• d_getsbyport

  From d_getsrvby.U:

  This variable conditionally defines the HAS_GETSERVBYPORT symbol, which indicates to the C program that the getservbyport() routine is available to look up services by their port.

• d_getsent

  From d_getsent.U:

  This variable conditionally defines HAS_GETSERVENT if getservent() is available to look up network services in some data base or another.

• d_getservbyname_r

  From d_getservbyname_r.U:

  This variable conditionally defines the HAS_GETSERVBYNAME_R symbol, which indicates to the C program that the getservbyname_r() routine is available.

• d_getservbyport_r

  From d_getservbyport_r.U:

  This variable conditionally defines the HAS_GETSERVBYPORT_R symbol, which indicates to the C program that the getservbyport_r() routine is available.

• d_getservent_r

  From d_getservent_r.U:

  This variable conditionally defines the HAS_GETSERVENT_R symbol, which indicates to the C program that the getservent_r() routine is available.

• d_getservprotos

  From d_getservprotos.U:

  This variable conditionally defines the HAS_GETSERV_PROTOS symbol, which indicates to the C program that <netdb.h> supplies prototypes for the various getserv*() functions. See also netdbtype.U for probing for various netdb types.

• d_getspnam

  From d_getspnam.U:

  This variable conditionally defines HAS_GETSPNAM if getspnam() is available to retrieve SysV shadow password entries by name.

• d_getspnam_r

  From d_getspnam_r.U:

  This variable conditionally defines the HAS_GETSPNAM_R symbol, which indicates to the C program that the getspnam_r() routine is available.

• d_gettimeod

  From d_ftime.U:

  This variable conditionally defines the HAS_GETTIMEOFDAY symbol, which indicates that the gettimeofday() system call exists (to obtain a sub-second accuracy clock). You should probably include <sys/resource.h>.

• d_gmtime64

  From d_timefuncs64.U:

  This variable conditionally defines the HAS_GMTIME64 symbol, which indicates to the C program that the gmtime64 () routine is available.

• d_gmtime_r

  From d_gmtime_r.U:

  This variable conditionally defines the HAS_GMTIME_R symbol, which indicates to the C program that the gmtime_r() routine is available.

• d_gnulibc

  From d_gnulibc.U:

  Defined if we're dealing with the GNU C Library.

• d_grpasswd

  From i_grp.U:

  This variable conditionally defines GRPASSWD , which indicates that struct group in <grp.h> contains gr_passwd.

• d_has_C_UTF8

  From d_setlocale.U:

  This variable is set to either true or false depending on whether the compilation system supports the C.UTF-8 locale.

• d_hasmntopt

  From d_hasmntopt.U:

  This variable conditionally defines the HAS_HASMNTOPT symbol, which indicates to the C program that the hasmntopt() routine is available to query the mount options of file systems.

• d_htonl

  From d_htonl.U:

  This variable conditionally defines HAS_HTONL if htonl() and its friends are available to do network order byte swapping.

• d_hypot

  From d_hypot.U:

  This variable conditionally defines HAS_HYPOT if hypot is available for numerically stable hypotenuse function.

• d_ilogb

  From d_ilogb.U:

  This variable conditionally defines the HAS_ILOGB symbol, which indicates to the C program that the ilogb() routine is available for extracting the exponent of double x as a signed integer.

• d_ilogbl

  From d_ilogbl.U:

  This variable conditionally defines the HAS_ILOGBL symbol, which indicates to the C program that the ilogbl() routine is available for extracting the exponent of long double x as a signed integer. If scalbnl is also present we can emulate frexpl.

• d_inc_version_list

  From inc_version_list.U:

  This variable conditionally defines PERL_INC_VERSION_LIST . It is set to undef when PERL_INC_VERSION_LIST is empty.

• d_inetaton

  From d_inetaton.U:

  This variable conditionally defines the HAS_INET_ATON symbol, which indicates to the C program that the inet_aton() function is available to parse IP address dotted-quad strings.

• d_inetntop

  From d_inetntop.U:

  This variable conditionally defines the HAS_INETNTOP symbol, which indicates to the C program that the inet_ntop() function is available.

• d_inetpton

  From d_inetpton.U:

  This variable conditionally defines the HAS_INETPTON symbol, which indicates to the C program that the inet_pton() function is available.

• d_int64_t

  From d_int64_t.U:

  This symbol will be defined if the C compiler supports int64_t.

• d_ip_mreq

  From d_socket.U:

  This variable conditionally defines the HAS_IP_MREQ symbol, which indicates the availability of a struct ip_mreq.

• d_ip_mreq_source

  From d_socket.U:

  This variable conditionally defines the HAS_IP_MREQ_SOURCE symbol, which indicates the availability of a struct ip_mreq_source.

• d_ipv6_mreq

  From d_socket.U:

  This variable conditionally defines the HAS_IPV6_MREQ symbol, which indicates the availability of a struct ipv6_mreq.

• d_ipv6_mreq_source

  From d_socket.U:

  This variable conditionally defines the HAS_IPV6_MREQ_SOURCE symbol, which indicates the availability of a struct ipv6_mreq_source.

• d_isascii

  From d_isascii.U:

  This variable conditionally defines the HAS_ISASCII constant, which indicates to the C program that isascii() is available.

• d_isblank

  From d_isblank.U:

  This variable conditionally defines the HAS_ISBLANK constant, which indicates to the C program that isblank() is available.

• d_isfinite

  From d_isfinite.U:

  This variable conditionally defines the HAS_ISFINITE symbol, which indicates to the C program that the isfinite() routine is available.

• d_isfinitel

  From d_isfinitel.U:

  This variable conditionally defines the HAS_ISFINITEL symbol, which indicates to the C program that the isfinitel() routine is available.

• d_isinf

  From d_isinf.U:

  This variable conditionally defines the HAS_ISINF symbol, which indicates to the C program that the isinf() routine is available.

• d_isinfl

  From d_isinfl.U:

  This variable conditionally defines the HAS_ISINFL symbol, which indicates to the C program that the isinfl() routine is available.

• d_isless

  From d_isless.U:

  This variable conditionally defines the HAS_ISLESS symbol, which indicates to the C program that the isless() routine is available.

• d_isnan

  From d_isnan.U:

  This variable conditionally defines the HAS_ISNAN symbol, which indicates to the C program that the isnan() routine is available.

• d_isnanl

  From d_isnanl.U:

  This variable conditionally defines the HAS_ISNANL symbol, which indicates to the C program that the isnanl() routine is available.

• d_isnormal

  From d_isnormal.U:

  This variable conditionally defines the HAS_ISNORMAL symbol, which indicates to the C program that the isnormal() routine is available.

• d_j0

  From d_j0.U:

  This variable conditionally defines the HAS_J0 symbol, which indicates to the C program that the j0() routine is available.

• d_j0l

  From d_j0.U:

  This variable conditionally defines the HAS_J0L symbol, which indicates to the C program that the j0l() routine is available.

• d_killpg

  From d_killpg.U:

  This variable conditionally defines the HAS_KILLPG symbol, which indicates to the C program that the killpg() routine is available to kill process groups.

• d_lc_monetary_2008

  From d_lc_monetary_2008.U:

  This variable conditionally defines HAS_LC_MONETARY_2008 if libc has the international currency locale rules from POSIX 1003.1-2008.

• d_lchown

  From d_lchown.U:

  This variable conditionally defines the HAS_LCHOWN symbol, which indicates to the C program that the lchown() routine is available to operate on a symbolic link (instead of following the link).

• d_ldbl_dig

  From d_ldbl_dig.U:

  This variable conditionally defines d_ldbl_dig if this system's header files provide LDBL_DIG , which is the number of significant digits in a long double precision number.

• d_ldexpl

  From d_longdbl.U:

  This variable conditionally defines the HAS_LDEXPL symbol, which indicates to the C program that the ldexpl() routine is available.

• d_lgamma

  From d_lgamma.U:

  This variable conditionally defines the HAS_LGAMMA symbol, which indicates to the C program that the lgamma() routine is available for the log gamma function. See also d_tgamma and d_lgamma_r.

• d_lgamma_r

  From d_lgamma_r.U:

  This variable conditionally defines the HAS_LGAMMA_R symbol, which indicates to the C program that the lgamma_r() routine is available for the log gamma function, without using the global signgam variable.

• d_libm_lib_version

  From d_libm_lib_version.U:

  This variable conditionally defines the LIBM_LIB_VERSION symbol, which indicates to the C program that math.h defines _LIB_VERSION being available in libm

• d_libname_unique

  From so.U:

  This variable is defined if the target system insists on unique basenames for shared library files. This is currently true on Android, false everywhere else we know of. Defaults to undef.

• d_link

  From d_link.U:

  This variable conditionally defines HAS_LINK if link() is available to create hard links.

• d_linkat

  From d_fsat.U:

  This variable conditionally defines the HAS_LINKAT symbol, which indicates the POSIX linkat() function is available.

• d_llrint

  From d_llrint.U:

  This variable conditionally defines the HAS_LLRINT symbol, which indicates to the C program that the llrint() routine is available to return the long long value closest to a double (according to the current rounding mode).

• d_llrintl

  From d_llrintl.U:

  This variable conditionally defines the HAS_LLRINTL symbol, which indicates to the C program that the llrintl() routine is available to return the long long value closest to a long double (according to the current rounding mode).

• d_llround

  From d_llround.U:

  This variable conditionally defines the HAS_LLROUND symbol, which indicates to the C program that the llround() routine is available to return the long long value nearest to x.

• d_llroundl

  From d_llroundl.U:

  This variable conditionally defines the HAS_LLROUNDL symbol, which indicates to the C program that the llroundl() routine is available to return the long long value nearest to x away from zero.

• d_localeconv_l

  From d_localeconv_l.U:

  This variable conditionally defines the HAS_LOCALECONV_L symbol, which indicates to the C program that the localeconv_l() routine is available.

• d_localtime64

  From d_timefuncs64.U:

  This variable conditionally defines the HAS_LOCALTIME64 symbol, which indicates to the C program that the localtime64 () routine is available.

• d_localtime_r

  From d_localtime_r.U:

  This variable conditionally defines the HAS_LOCALTIME_R symbol, which indicates to the C program that the localtime_r() routine is available.

• d_localtime_r_needs_tzset

  From d_localtime_r.U:

  This variable conditionally defines the LOCALTIME_R_NEEDS_TZSET symbol, which makes us call tzset before localtime_r()

• d_locconv

  From d_locconv.U:

  This variable conditionally defines HAS_LOCALECONV if localeconv() is available for numeric and monetary formatting conventions.

• d_lockf

  From d_lockf.U:

  This variable conditionally defines HAS_LOCKF if lockf() is available to do file locking.

• d_log1p

  From d_log1p.U:

  This variable conditionally defines the HAS_LOG1P symbol, which indicates to the C program that the logp1() routine is available to compute log(1 + x) for values of x close to zero.

• d_log2

  From d_log2.U:

  This variable conditionally defines the HAS_LOG2 symbol, which indicates to the C program that the log2() routine is available to compute log base two.

• d_logb

  From d_logb.U:

  This variable conditionally defines the HAS_LOGB symbol, which indicates to the C program that the logb() routine is available to extract the exponent of x.

• d_long_double_style_ieee

  From d_longdbl.U:

  This variable conditionally defines LONG_DOUBLE_STYLE_IEEE if the long double is any of the IEEE 754 style long doubles: LONG_DOUBLE_STYLE_IEEE_STD , LONG_DOUBLE_STYLE_IEEE_EXTENDED , LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE .

• d_long_double_style_ieee_doubledouble

  From d_longdbl.U:

  This variable conditionally defines LONG_DOUBLE_STYLE_IEEE_DOUBLEDOUBLE if the long double is the 128-bit IEEE 754 double-double.

• d_long_double_style_ieee_extended

  From d_longdbl.U:

  This variable conditionally defines LONG_DOUBLE_STYLE_IEEE_EXTENDED if the long double is the 80-bit IEEE 754 extended precision. Note that despite the extended this is less than the std , since thisis an extension of the double precision.

• d_long_double_style_ieee_std

  From d_longdbl.U:

  This variable conditionally defines LONG_DOUBLE_STYLE_IEEE_STD if the long double is the 128-bit IEEE 754.

• d_long_double_style_vax

  From d_longdbl.U:

  This variable conditionally defines LONG_DOUBLE_STYLE_VAX if the long double is the 128-bit VAX format H.

• d_longdbl

  From d_longdbl.U:

  This variable conditionally defines HAS_LONG_DOUBLE if the long double type is supported.

• d_longlong

  From d_longlong.U:

  This variable conditionally defines HAS_LONG_LONG if the long long type is supported.

• d_lrint

  From d_lrint.U:

  This variable conditionally defines the HAS_LRINT symbol, which indicates to the C program that the lrint() routine is available to return the integral value closest to a double (according to the current rounding mode).

• d_lrintl

  From d_lrintl.U:

  This variable conditionally defines the HAS_LRINTL symbol, which indicates to the C program that the lrintl() routine is available to return the integral value closest to a long double (according to the current rounding mode).

• d_lround

  From d_lround.U:

  This variable conditionally defines the HAS_LROUND symbol, which indicates to the C program that the lround() routine is available to return the integral value nearest to x.

• d_lroundl

  From d_lroundl.U:

  This variable conditionally defines the HAS_LROUNDL symbol, which indicates to the C program that the lroundl() routine is available to return the integral value nearest to x away from zero.

• d_lseekproto

  From d_lseekproto.U:

  This variable conditionally defines the HAS_LSEEK_PROTO symbol, which indicates to the C program that the system provides a prototype for the lseek() function. Otherwise, it is up to the program to supply one.

• d_lstat

  From d_lstat.U:

  This variable conditionally defines HAS_LSTAT if lstat() is available to do file stats on symbolic links.

• d_madvise

  From d_madvise.U:

  This variable conditionally defines HAS_MADVISE if madvise() is available to map a file into memory.

• d_malloc_good_size

  From d_malloc_size.U:

  This symbol, if defined, indicates that the malloc_good_size routine is available for use.

• d_malloc_size

  From d_malloc_size.U:

  This symbol, if defined, indicates that the malloc_size routine is available for use.

• d_mblen

  From d_mblen.U:

  This variable conditionally defines the HAS_MBLEN symbol, which indicates to the C program that the mblen() routine is available to find the number of bytes in a multibye character.

• d_mbrlen

  From d_mbrlen.U:

  This variable conditionally defines the HAS_MBRLEN symbol if the mbrlen() routine is available to be used to get the length of multi-byte character strings.

• d_mbrtowc

  From d_mbrtowc.U:

  This variable conditionally defines the HAS_MBRTOWC symbol if the mbrtowc() routine is available to be used to convert a multi-byte character into a wide character.

• d_mbstowcs

  From d_mbstowcs.U:

  This variable conditionally defines the HAS_MBSTOWCS symbol, which indicates to the C program that the mbstowcs() routine is available to convert a multibyte string into a wide character string.

• d_mbtowc

  From d_mbtowc.U:

  This variable conditionally defines the HAS_MBTOWC symbol, which indicates to the C program that the mbtowc() routine is available to convert multibyte to a wide character.

• d_memmem

  From d_memmem.U:

  This variable conditionally defines the HAS_MEMMEM symbol, which indicates to the C program that the memmem() routine is available to return a pointer to the start of the first occurance of a substring in a memory area (or NULL if not found).

• d_memrchr

  From d_memrchr.U:

  This variable conditionally defines the HAS_MEMRCHR symbol, which indicates to the C program that the memrchr() routine is available to return a pointer to the last occurrence of a byte in a memory area (or NULL if not found).

• d_mkdir

  From d_mkdir.U:

  This variable conditionally defines the HAS_MKDIR symbol, which indicates to the C program that the mkdir() routine is available to create directories..

• d_mkdtemp

  From d_mkdtemp.U:

  This variable conditionally defines the HAS_MKDTEMP symbol, which indicates to the C program that the mkdtemp() routine is available to exclusively create a uniquely named temporary directory.

• d_mkfifo

  From d_mkfifo.U:

  This variable conditionally defines the HAS_MKFIFO symbol, which indicates to the C program that the mkfifo() routine is available.

• d_mkostemp

  From d_mkostemp.U:

  This variable conditionally defines HAS_MKOSTEMP if mkostemp() is available to exclusively create and open a uniquely named (with a suffix) temporary file.

• d_mkstemp

  From d_mkstemp.U:

  This variable conditionally defines the HAS_MKSTEMP symbol, which indicates to the C program that the mkstemp() routine is available to exclusively create and open a uniquely named temporary file.

• d_mkstemps

  From d_mkstemps.U:

  This variable conditionally defines the HAS_MKSTEMPS symbol, which indicates to the C program that the mkstemps() routine is available to exclusively create and open a uniquely named (with a suffix) temporary file.

• d_mktime

  From d_mktime.U:

  This variable conditionally defines the HAS_MKTIME symbol, which indicates to the C program that the mktime() routine is available.

• d_mktime64

  From d_timefuncs64.U:

  This variable conditionally defines the HAS_MKTIME64 symbol, which indicates to the C program that the mktime64 () routine is available.

• d_mmap

  From d_mmap.U:

  This variable conditionally defines HAS_MMAP if mmap() is available to map a file into memory.

• d_modfl

  From d_modfl.U:

  This variable conditionally defines the HAS_MODFL symbol, which indicates to the C program that the modfl() routine is available.

• d_modflproto

  From d_modfl.U:

  This symbol, if defined, indicates that the system provides a prototype for the modfl() function. Otherwise, it is up to the program to supply one. C99 says it should be long double modfl(long double, long double *);

• d_mprotect

  From d_mprotect.U:

  This variable conditionally defines HAS_MPROTECT if mprotect() is available to modify the access protection of a memory mapped file.

• d_msg

  From d_msg.U:

  This variable conditionally defines the HAS_MSG symbol, which indicates that the entire msg*(2) library is present.

• d_msg_ctrunc

  From d_socket.U:

  This variable conditionally defines the HAS_MSG_CTRUNC symbol, which indicates that the MSG_CTRUNC is available. #ifdef is not enough because it may be an enum, glibc has been known to do this.

• d_msg_dontroute

  From d_socket.U:

  This variable conditionally defines the HAS_MSG_DONTROUTE symbol, which indicates that the MSG_DONTROUTE is available. #ifdef is not enough because it may be an enum, glibc has been known to do this.

• d_msg_oob

  From d_socket.U:

  This variable conditionally defines the HAS_MSG_OOB symbol, which indicates that the MSG_OOB is available. #ifdef is not enough because it may be an enum, glibc has been known to do this.

• d_msg_peek

  From d_socket.U:

  This variable conditionally defines the HAS_MSG_PEEK symbol, which indicates that the MSG_PEEK is available. #ifdef is not enough because it may be an enum, glibc has been known to do this.

• d_msg_proxy

  From d_socket.U:

  This variable conditionally defines the HAS_MSG_PROXY symbol, which indicates that the MSG_PROXY is available. #ifdef is not enough because it may be an enum, glibc has been known to do this.

• d_msgctl

  From d_msgctl.U:

  This variable conditionally defines the HAS_MSGCTL symbol, which indicates to the C program that the msgctl() routine is available.

• d_msgget

  From d_msgget.U:

  This variable conditionally defines the HAS_MSGGET symbol, which indicates to the C program that the msgget() routine is available.

• d_msghdr_s

  From d_msghdr_s.U:

  This variable conditionally defines the HAS_STRUCT_MSGHDR symbol, which indicates that the struct msghdr is supported.

• d_msgrcv

  From d_msgrcv.U:

  This variable conditionally defines the HAS_MSGRCV symbol, which indicates to the C program that the msgrcv() routine is available.

• d_msgsnd

  From d_msgsnd.U:

  This variable conditionally defines the HAS_MSGSND symbol, which indicates to the C program that the msgsnd() routine is available.

• d_msync

  From d_msync.U:

  This variable conditionally defines HAS_MSYNC if msync() is available to synchronize a mapped file.

• d_munmap

  From d_munmap.U:

  This variable conditionally defines HAS_MUNMAP if munmap() is available to unmap a region mapped by mmap().

• d_mymalloc

  From mallocsrc.U:

  This variable conditionally defines MYMALLOC in case other parts of the source want to take special action if MYMALLOC is used. This may include different sorts of profiling or error detection.

• d_nan

  From d_nan.U:

  This variable conditionally defines HAS_NAN if nan() is available to generate NaN.

• d_nanosleep

  From d_nanosleep.U:

  This variable conditionally defines HAS_NANOSLEEP if nanosleep() is available to sleep with 1E-9 sec accuracy.

• d_ndbm

  From i_ndbm.U:

  This variable conditionally defines the HAS_NDBM symbol, which indicates that both the ndbm.h include file and an appropriate ndbm library exist. Consult the different i_*ndbm variables to find out the actual include location. Sometimes, a system has the header file but not the library. This variable will only be set if the system has both.

• d_ndbm_h_uses_prototypes

  From i_ndbm.U:

  This variable conditionally defines the NDBM_H_USES_PROTOTYPES symbol, which indicates that the ndbm.h include file uses real ANSI C prototypes instead of K&R style function declarations. K&R style declarations are unsupported in C++, so the include file requires special handling when using a C++ compiler and this variable is undefined. Consult the different d_*ndbm_h_uses_prototypes variables to get the same information for alternative ndbm.h include files.

• d_nearbyint

  From d_nearbyint.U:

  This variable conditionally defines HAS_NEARBYINT if nearbyint() is available to return the integral value closest to (according to the current rounding mode) to x.

• d_newlocale

  From d_newlocale.U:

  This variable conditionally defines the HAS_NEWLOCALE symbol, which indicates to the C program that the newlocale() routine is available to return a new locale object or modify an existing locale object.

• d_nextafter

  From d_nextafter.U:

  This variable conditionally defines HAS_NEXTAFTER if nextafter() is available to return the next machine representable double from x in direction y.

• d_nexttoward

  From d_nexttoward.U:

  This variable conditionally defines HAS_NEXTTOWARD if nexttoward() is available to return the next machine representable long double from x in direction y.

• d_nice

  From d_nice.U:

  This variable conditionally defines the HAS_NICE symbol, which indicates to the C program that the nice() routine is available.

• d_nl_langinfo

  From d_nl_langinfo.U:

  This variable conditionally defines the HAS_NL_LANGINFO symbol, which indicates to the C program that the nl_langinfo() routine is available.

• d_nv_preserves_uv

  From perlxv.U:

  This variable indicates whether a variable of type nvtype can preserve all the bits a variable of type uvtype.

• d_nv_zero_is_allbits_zero

  From perlxv.U:

  This variable indicates whether a variable of type nvtype stores 0.0 in memory as all bits zero.

• d_off64_t

  From d_off64_t.U:

  This symbol will be defined if the C compiler supports off64_t.

• d_old_pthread_create_joinable

  From d_pthrattrj.U:

  This variable conditionally defines pthread_create_joinable. undef if pthread.h defines PTHREAD_CREATE_JOINABLE .

• d_oldpthreads

  From usethreads.U:

  This variable conditionally defines the OLD_PTHREADS_API symbol, and indicates that Perl should be built to use the old draft POSIX threads API . This is only potentially meaningful if usethreads is set.

• d_oldsock

  From d_socket.U:

  This variable conditionally defines the OLDSOCKET symbol, which indicates that the BSD socket interface is based on 4.1c and not 4.2.

• d_open3

  From d_open3.U:

  This variable conditionally defines the HAS_OPEN3 manifest constant, which indicates to the C program that the 3 argument version of the open(2) function is available.

• d_openat

  From d_fsat.U:

  This variable conditionally defines the HAS_OPENAT symbol, which indicates the POSIX openat() function is available.

• d_pathconf

  From d_pathconf.U:

  This variable conditionally defines the HAS_PATHCONF symbol, which indicates to the C program that the pathconf() routine is available to determine file-system related limits and options associated with a given filename.

• d_pause

  From d_pause.U:

  This variable conditionally defines the HAS_PAUSE symbol, which indicates to the C program that the pause() routine is available to suspend a process until a signal is received.

• d_perl_otherlibdirs

  From otherlibdirs.U:

  This variable conditionally defines PERL_OTHERLIBDIRS , which contains a colon-separated set of paths for the perl binary to include in @INC . See also otherlibdirs.

• d_phostname

  From d_gethname.U:

  This variable conditionally defines the HAS_PHOSTNAME symbol, which contains the shell command which, when fed to popen(), may be used to derive the host name.

• d_pipe

  From d_pipe.U:

  This variable conditionally defines the HAS_PIPE symbol, which indicates to the C program that the pipe() routine is available to create an inter-process channel.

• d_pipe2

  From d_pipe2.U:

  This variable conditionally defines the HAS_PIPE2 symbol, which indicates to the C program that the pipe2() routine is available to create an inter-process channel.

• d_poll

  From d_poll.U:

  This variable conditionally defines the HAS_POLL symbol, which indicates to the C program that the poll() routine is available to poll active file descriptors.

• d_portable

  From d_portable.U:

  This variable conditionally defines the PORTABLE symbol, which indicates to the C program that it should not assume that it is running on the machine it was compiled on.

• d_prctl

  From d_prctl.U:

  This variable conditionally defines the HAS_PRCTL symbol, which indicates to the C program that the prctl() routine is available. Note that there are at least two prctl variants: Linux and Irix. While they are somewhat similar, they are incompatible.

• d_prctl_set_name

  From d_prctl.U:

  This variable conditionally defines the HAS_PRCTL_SET_NAME symbol, which indicates to the C program that the prctl() routine supports the PR_SET_NAME option.

• d_PRId64

  From quadfio.U:

  This variable conditionally defines the PERL_PRId64 symbol, which indicates that stdio has a symbol to print 64-bit decimal numbers.

• d_PRIeldbl

  From longdblfio.U:

  This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a symbol to print long doubles.

• d_PRIEUldbl

  From longdblfio.U:

  This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a symbol to print long doubles. The U in the name is to separate this from d_PRIeldbl so that even case-blind systems can see the difference.

• d_PRIfldbl

  From longdblfio.U:

  This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a symbol to print long doubles.

• d_PRIFUldbl

  From longdblfio.U:

  This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a symbol to print long doubles. The U in the name is to separate this from d_PRIfldbl so that even case-blind systems can see the difference.

• d_PRIgldbl

  From longdblfio.U:

  This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a symbol to print long doubles.

• d_PRIGUldbl

  From longdblfio.U:

  This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a symbol to print long doubles. The U in the name is to separate this from d_PRIgldbl so that even case-blind systems can see the difference.

• d_PRIi64

  From quadfio.U:

  This variable conditionally defines the PERL_PRIi64 symbol, which indicates that stdio has a symbol to print 64-bit decimal numbers.

• d_printf_format_null

  From d_attribut.U:

  This variable conditionally defines PRINTF_FORMAT_NULL_OK , which indicates the C compiler allows printf-like formats to be null.

• d_PRIo64

  From quadfio.U:

  This variable conditionally defines the PERL_PRIo64 symbol, which indicates that stdio has a symbol to print 64-bit octal numbers.

• d_PRIu64

  From quadfio.U:

  This variable conditionally defines the PERL_PRIu64 symbol, which indicates that stdio has a symbol to print 64-bit unsigned decimal numbers.

• d_PRIx64

  From quadfio.U:

  This variable conditionally defines the PERL_PRIx64 symbol, which indicates that stdio has a symbol to print 64-bit hexadecimal numbers.

• d_PRIXU64

  From quadfio.U:

  This variable conditionally defines the PERL_PRIXU64 symbol, which indicates that stdio has a symbol to print 64-bit hExADECimAl numbers. The U in the name is to separate this from d_PRIx64 so that even case-blind systems can see the difference.

• d_procselfexe

  From d_procselfexe.U:

  Defined if $procselfexe is symlink to the absolute pathname of the executing program.

• d_pseudofork

  From d_vfork.U:

  This variable conditionally defines the HAS_PSEUDOFORK symbol, which indicates that an emulation of the fork routine is available.

• d_pthread_atfork

  From d_pthread_atfork.U:

  This variable conditionally defines the HAS_PTHREAD_ATFORK symbol, which indicates to the C program that the pthread_atfork() routine is available.

• d_pthread_attr_setscope

  From d_pthread_attr_ss.U:

  This variable conditionally defines HAS_PTHREAD_ATTR_SETSCOPE if pthread_attr_setscope() is available to set the contention scope attribute of a thread attribute object.

• d_pthread_yield

  From d_pthread_y.U:

  This variable conditionally defines the HAS_PTHREAD_YIELD symbol if the pthread_yield routine is available to yield the execution of the current thread.

• d_ptrdiff_t

  From d_ptrdiff_t.U:

  This symbol will be defined if the C compiler supports ptrdiff_t.

• d_pwage

  From i_pwd.U:

  This variable conditionally defines PWAGE , which indicates that struct passwd contains pw_age.

• d_pwchange

  From i_pwd.U:

  This variable conditionally defines PWCHANGE , which indicates that struct passwd contains pw_change.

• d_pwclass

  From i_pwd.U:

  This variable conditionally defines PWCLASS , which indicates that struct passwd contains pw_class.

• d_pwcomment

  From i_pwd.U:

  This variable conditionally defines PWCOMMENT , which indicates that struct passwd contains pw_comment.

• d_pwexpire

  From i_pwd.U:

  This variable conditionally defines PWEXPIRE , which indicates that struct passwd contains pw_expire.

• d_pwgecos

  From i_pwd.U:

  This variable conditionally defines PWGECOS , which indicates that struct passwd contains pw_gecos.

• d_pwpasswd

  From i_pwd.U:

  This variable conditionally defines PWPASSWD , which indicates that struct passwd contains pw_passwd.

• d_pwquota

  From i_pwd.U:

  This variable conditionally defines PWQUOTA , which indicates that struct passwd contains pw_quota.

• d_qgcvt

  From d_qgcvt.U:

  This variable conditionally defines the HAS_QGCVT symbol, which indicates to the C program that the qgcvt() routine is available.

• d_quad

  From quadtype.U:

  This variable, if defined, tells that there's a 64-bit integer type, quadtype.

• d_querylocale

  From d_newlocale.U:

  This variable conditionally defines the HAS_QUERYLOCALE symbol, which indicates to the C program that the querylocale() routine is available to return the name of the locale for a category mask.

• d_random_r

  From d_random_r.U:

  This variable conditionally defines the HAS_RANDOM_R symbol, which indicates to the C program that the random_r() routine is available.

• d_re_comp

  From d_regcmp.U:

  This variable conditionally defines the HAS_RECOMP symbol, which indicates to the C program that the re_comp() routine is available for regular pattern matching (usually on BSD ). If so, it is likely that re_exec() exists.

• d_readdir

  From d_readdir.U:

  This variable conditionally defines HAS_READDIR if readdir() is available to read directory entries.

• d_readdir64_r

  From d_readdir64_r.U:

  This variable conditionally defines the HAS_READDIR64_R symbol, which indicates to the C program that the readdir64_r() routine is available.

• d_readdir_r

  From d_readdir_r.U:

  This variable conditionally defines the HAS_READDIR_R symbol, which indicates to the C program that the readdir_r() routine is available.

• d_readlink

  From d_readlink.U:

  This variable conditionally defines the HAS_READLINK symbol, which indicates to the C program that the readlink() routine is available to read the value of a symbolic link.

• d_readv

  From d_readv.U:

  This variable conditionally defines the HAS_READV symbol, which indicates to the C program that the readv() routine is available.

• d_recvmsg

  From d_recvmsg.U:

  This variable conditionally defines the HAS_RECVMSG symbol, which indicates to the C program that the recvmsg() routine is available.

• d_regcmp

  From d_regcmp.U:

  This variable conditionally defines the HAS_REGCMP symbol, which indicates to the C program that the regcmp() routine is available for regular pattern matching (usually on System V).

• d_regcomp

  From d_regcmp.U:

  This variable conditionally defines the HAS_REGCOMP symbol, which indicates to the C program that the regcomp() routine is available for regular pattern matching (usually on POSIX.2 conforming systems).

• d_remainder

  From d_remainder.U:

  This variable conditionally defines the HAS_REMAINDER symbol, which indicates to the C program that the remainder() routine is available.

• d_remquo

  From d_remquo.U:

  This variable conditionally defines the HAS_REMQUO symbol, which indicates to the C program that the remquo() routine is available.

• d_rename

  From d_rename.U:

  This variable conditionally defines the HAS_RENAME symbol, which indicates to the C program that the rename() routine is available to rename files.

• d_renameat

  From d_fsat.U:

  This variable conditionally defines the HAS_RENAMEAT symbol, which indicates the POSIX renameat() function is available.

• d_rewinddir

  From d_readdir.U:

  This variable conditionally defines HAS_REWINDDIR if rewinddir() is available.

• d_rint

  From d_rint.U:

  This variable conditionally defines the HAS_RINT symbol, which indicates to the C program that the rint() routine is available.

• d_rmdir

  From d_rmdir.U:

  This variable conditionally defines HAS_RMDIR if rmdir() is available to remove directories.

• d_round

  From d_round.U:

  This variable conditionally defines the HAS_ROUND symbol, which indicates to the C program that the round() routine is available.

• d_sbrkproto

  From d_sbrkproto.U:

  This variable conditionally defines the HAS_SBRK_PROTO symbol, which indicates to the C program that the system provides a prototype for the sbrk() function. Otherwise, it is up to the program to supply one.

• d_scalbn

  From d_scalbn.U:

  This variable conditionally defines the HAS_SCALBN symbol, which indicates to the C program that the scalbn() routine is available.

• d_scalbnl

  From d_scalbnl.U:

  This variable conditionally defines the HAS_SCALBNL symbol, which indicates to the C program that the scalbnl() routine is available. If ilogbl is also present we can emulate frexpl.

• d_sched_yield

  From d_pthread_y.U:

  This variable conditionally defines the HAS_SCHED_YIELD symbol if the sched_yield routine is available to yield the execution of the current thread.

• d_scm_rights

  From d_socket.U:

  This variable conditionally defines the HAS_SCM_RIGHTS symbol, which indicates that the SCM_RIGHTS is available. #ifdef is not enough because it may be an enum, glibc has been known to do this.

• d_SCNfldbl

  From longdblfio.U:

  This variable conditionally defines the PERL_PRIfldbl symbol, which indicates that stdio has a symbol to scan long doubles.

• d_seekdir

  From d_readdir.U:

  This variable conditionally defines HAS_SEEKDIR if seekdir() is available.

• d_select

  From d_select.U:

  This variable conditionally defines HAS_SELECT if select() is available to select active file descriptors. A <sys/time.h> inclusion may be necessary for the timeout field.

• d_sem

  From d_sem.U:

  This variable conditionally defines the HAS_SEM symbol, which indicates that the entire sem*(2) library is present.

• d_semctl

  From d_semctl.U:

  This variable conditionally defines the HAS_SEMCTL symbol, which indicates to the C program that the semctl() routine is available.

• d_semctl_semid_ds

  From d_union_semun.U:

  This variable conditionally defines USE_SEMCTL_SEMID_DS , which indicates that struct semid_ds * is to be used for semctl IPC_STAT .

• d_semctl_semun

  From d_union_semun.U:

  This variable conditionally defines USE_SEMCTL_SEMUN , which indicates that union semun is to be used for semctl IPC_STAT .

• d_semget

  From d_semget.U:

  This variable conditionally defines the HAS_SEMGET symbol, which indicates to the C program that the semget() routine is available.

• d_semop

  From d_semop.U:

  This variable conditionally defines the HAS_SEMOP symbol, which indicates to the C program that the semop() routine is available.

• d_sendmsg

  From d_sendmsg.U:

  This variable conditionally defines the HAS_SENDMSG symbol, which indicates to the C program that the sendmsg() routine is available.

• d_setegid

  From d_setegid.U:

  This variable conditionally defines the HAS_SETEGID symbol, which indicates to the C program that the setegid() routine is available to change the effective gid of the current program.

• d_seteuid

  From d_seteuid.U:

  This variable conditionally defines the HAS_SETEUID symbol, which indicates to the C program that the seteuid() routine is available to change the effective uid of the current program.

• d_setgrent

  From d_setgrent.U:

  This variable conditionally defines the HAS_SETGRENT symbol, which indicates to the C program that the setgrent() routine is available for initializing sequential access to the group database.

• d_setgrent_r

  From d_setgrent_r.U:

  This variable conditionally defines the HAS_SETGRENT_R symbol, which indicates to the C program that the setgrent_r() routine is available.

• d_setgrps

  From d_setgrps.U:

  This variable conditionally defines the HAS_SETGROUPS symbol, which indicates to the C program that the setgroups() routine is available to set the list of process groups.

• d_sethent

  From d_sethent.U:

  This variable conditionally defines HAS_SETHOSTENT if sethostent() is available.

• d_sethostent_r

  From d_sethostent_r.U:

  This variable conditionally defines the HAS_SETHOSTENT_R symbol, which indicates to the C program that the sethostent_r() routine is available.

• d_setitimer

  From d_setitimer.U:

  This variable conditionally defines the HAS_SETITIMER symbol, which indicates to the C program that the setitimer() routine is available.

• d_setlinebuf

  From d_setlnbuf.U:

  This variable conditionally defines the HAS_SETLINEBUF symbol, which indicates to the C program that the setlinebuf() routine is available to change stderr or stdout from block-buffered or unbuffered to a line-buffered mode.

• d_setlocale

  From d_setlocale.U:

  This variable conditionally defines HAS_SETLOCALE if setlocale() is available to handle locale-specific ctype implementations.

• d_setlocale_accepts_any_locale_name

  From d_setlocale.U:

  This variable conditionally defines SETLOCALE_ACCEPTS_ANY_LOCALE_NAME if setlocale() accepts any locale name.

• d_setlocale_r

  From d_setlocale_r.U:

  This variable conditionally defines the HAS_SETLOCALE_R symbol, which indicates to the C program that the setlocale_r() routine is available.

• d_setnent

  From d_setnent.U:

  This variable conditionally defines HAS_SETNETENT if setnetent() is available.

• d_setnetent_r

  From d_setnetent_r.U:

  This variable conditionally defines the HAS_SETNETENT_R symbol, which indicates to the C program that the setnetent_r() routine is available.

• d_setpent

  From d_setpent.U:

  This variable conditionally defines HAS_SETPROTOENT if setprotoent() is available.

• d_setpgid

  From d_setpgid.U:

  This variable conditionally defines the HAS_SETPGID symbol if the setpgid(pid, gpid) function is available to set process group ID .

• d_setpgrp

  From d_setpgrp.U:

  This variable conditionally defines HAS_SETPGRP if setpgrp() is available to set the current process group.

• d_setpgrp2

  From d_setpgrp2.U:

  This variable conditionally defines the HAS_SETPGRP2 symbol, which indicates to the C program that the setpgrp2() (as in DG/UX ) routine is available to set the current process group.

• d_setprior

  From d_setprior.U:

  This variable conditionally defines HAS_SETPRIORITY if setpriority() is available to set a process's priority.

• d_setproctitle

  From d_setproctitle.U:

  This variable conditionally defines the HAS_SETPROCTITLE symbol, which indicates to the C program that the setproctitle() routine is available.

• d_setprotoent_r

  From d_setprotoent_r.U:

  This variable conditionally defines the HAS_SETPROTOENT_R symbol, which indicates to the C program that the setprotoent_r() routine is available.

• d_setpwent

  From d_setpwent.U:

  This variable conditionally defines the HAS_SETPWENT symbol, which indicates to the C program that the setpwent() routine is available for initializing sequential access to the passwd database.

• d_setpwent_r

  From d_setpwent_r.U:

  This variable conditionally defines the HAS_SETPWENT_R symbol, which indicates to the C program that the setpwent_r() routine is available.

• d_setregid

  From d_setregid.U:

  This variable conditionally defines HAS_SETREGID if setregid() is available to change the real and effective gid of the current process.

• d_setresgid

  From d_setregid.U:

  This variable conditionally defines HAS_SETRESGID if setresgid() is available to change the real, effective and saved gid of the current process.

• d_setresuid

  From d_setreuid.U:

  This variable conditionally defines HAS_SETREUID if setresuid() is available to change the real, effective and saved uid of the current process.

• d_setreuid

  From d_setreuid.U:

  This variable conditionally defines HAS_SETREUID if setreuid() is available to change the real and effective uid of the current process.

• d_setrgid

  From d_setrgid.U:

  This variable conditionally defines the HAS_SETRGID symbol, which indicates to the C program that the setrgid() routine is available to change the real gid of the current program.

• d_setruid

  From d_setruid.U:

  This variable conditionally defines the HAS_SETRUID symbol, which indicates to the C program that the setruid() routine is available to change the real uid of the current program.

• d_setsent

  From d_setsent.U:

  This variable conditionally defines HAS_SETSERVENT if setservent() is available.

• d_setservent_r

  From d_setservent_r.U:

  This variable conditionally defines the HAS_SETSERVENT_R symbol, which indicates to the C program that the setservent_r() routine is available.

• d_setsid

  From d_setsid.U:

  This variable conditionally defines HAS_SETSID if setsid() is available to set the process group ID .

• d_setvbuf

  From d_setvbuf.U:

  This variable conditionally defines the HAS_SETVBUF symbol, which indicates to the C program that the setvbuf() routine is available to change buffering on an open stdio stream.

• d_shm

  From d_shm.U:

  This variable conditionally defines the HAS_SHM symbol, which indicates that the entire shm*(2) library is present.

• d_shmat

  From d_shmat.U:

  This variable conditionally defines the HAS_SHMAT symbol, which indicates to the C program that the shmat() routine is available.

• d_shmatprototype

  From d_shmat.U:

  This variable conditionally defines the HAS_SHMAT_PROTOTYPE symbol, which indicates that sys/shm.h has a prototype for shmat.

• d_shmctl

  From d_shmctl.U:

  This variable conditionally defines the HAS_SHMCTL symbol, which indicates to the C program that the shmctl() routine is available.

• d_shmdt

  From d_shmdt.U:

  This variable conditionally defines the HAS_SHMDT symbol, which indicates to the C program that the shmdt() routine is available.

• d_shmget

  From d_shmget.U:

  This variable conditionally defines the HAS_SHMGET symbol, which indicates to the C program that the shmget() routine is available.

• d_sigaction

  From d_sigaction.U:

  This variable conditionally defines the HAS_SIGACTION symbol, which indicates that the Vr4 sigaction() routine is available.

• d_siginfo_si_addr

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_ADDR symbol, which indicates that the siginfo_t struct has the si_addr member.

• d_siginfo_si_band

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_BAND symbol, which indicates that the siginfo_t struct has the si_band member.

• d_siginfo_si_errno

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_ERRNO symbol, which indicates that the siginfo_t struct has the si_errno member.

• d_siginfo_si_fd

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_FD symbol, which indicates that the siginfo_t struct has the si_fd member.

• d_siginfo_si_pid

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_PID symbol, which indicates that the siginfo_t struct has the si_pid member.

• d_siginfo_si_status

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_STATUS symbol, which indicates that the siginfo_t struct has the si_status member.

• d_siginfo_si_uid

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_UID symbol, which indicates that the siginfo_t struct has the si_uid member.

• d_siginfo_si_value

  From d_siginfo_si.U:

  This variable conditionally defines the HAS_SIGINFO_SI_VALUE symbol, which indicates that the siginfo_t struct has the si_value member.

• d_signbit

  From d_signbit.U:

  This variable conditionally defines the HAS_SIGNBIT symbol, which indicates to the C program that the signbit() routine is available and safe to use with perl's intern NV type.

• d_sigprocmask

  From d_sigprocmask.U:

  This variable conditionally defines HAS_SIGPROCMASK if sigprocmask() is available to examine or change the signal mask of the calling process.

• d_sigsetjmp

  From d_sigsetjmp.U:

  This variable conditionally defines the HAS_SIGSETJMP symbol, which indicates that the sigsetjmp() routine is available to call setjmp() and optionally save the process's signal mask.

• d_sin6_scope_id

  From d_socket.U:

  This variable conditionally defines the HAS_SIN6_SCOPE_ID symbol, which indicates that a struct sockaddr_in6 structure has the sin6_scope_id member.

• d_sitearch

  From sitearch.U:

  This variable conditionally defines SITEARCH to hold the pathname of architecture-dependent library files for $package. If $sitearch is the same as $archlib, then this is set to undef.

• d_snprintf

  From d_snprintf.U:

  This variable conditionally defines the HAS_SNPRINTF symbol, which indicates to the C program that the snprintf () library function is available.

• d_sockaddr_in6

  From d_socket.U:

  This variable conditionally defines the HAS_SOCKADDR_IN6 symbol, which indicates the availability of a struct sockaddr_in6.

• d_sockaddr_sa_len

  From d_socket.U:

  This variable conditionally defines the HAS_SOCKADDR_SA_LEN symbol, which indicates that a struct sockaddr structure has the sa_len member.

• d_sockatmark

  From d_sockatmark.U:

  This variable conditionally defines the HAS_SOCKATMARK symbol, which indicates to the C program that the sockatmark() routine is available.

• d_sockatmarkproto

  From d_sockatmarkproto.U:

  This variable conditionally defines the HAS_SOCKATMARK_PROTO symbol, which indicates to the C program that the system provides a prototype for the sockatmark() function. Otherwise, it is up to the program to supply one.

• d_socket

  From d_socket.U:

  This variable conditionally defines HAS_SOCKET , which indicates that the BSD socket interface is supported.

• d_socklen_t

  From d_socklen_t.U:

  This symbol will be defined if the C compiler supports socklen_t.

• d_sockpair

  From d_socket.U:

  This variable conditionally defines the HAS_SOCKETPAIR symbol, which indicates that the BSD socketpair() is supported.

• d_socks5_init

  From d_socks5_init.U:

  This variable conditionally defines the HAS_SOCKS5_INIT symbol, which indicates to the C program that the socks5_init() routine is available.

• d_sqrtl

  From d_sqrtl.U:

  This variable conditionally defines the HAS_SQRTL symbol, which indicates to the C program that the sqrtl() routine is available.

• d_srand48_r

  From d_srand48_r.U:

  This variable conditionally defines the HAS_SRAND48_R symbol, which indicates to the C program that the srand48_r() routine is available.

• d_srandom_r

  From d_srandom_r.U:

  This variable conditionally defines the HAS_SRANDOM_R symbol, which indicates to the C program that the srandom_r() routine is available.

• d_sresgproto

  From d_sresgproto.U:

  This variable conditionally defines the HAS_SETRESGID_PROTO symbol, which indicates to the C program that the system provides a prototype for the setresgid() function. Otherwise, it is up to the program to supply one.

• d_sresuproto

  From d_sresuproto.U:

  This variable conditionally defines the HAS_SETRESUID_PROTO symbol, which indicates to the C program that the system provides a prototype for the setresuid() function. Otherwise, it is up to the program to supply one.

• d_stat

  From d_stat.U:

  This variable conditionally defines HAS_STAT if stat() is available to get file status.

• d_statblks

  From d_statblks.U:

  This variable conditionally defines USE_STAT_BLOCKS if this system has a stat structure declaring st_blksize and st_blocks.

• d_statfs_f_flags

  From d_statfs_f_flags.U:

  This variable conditionally defines the HAS_STRUCT_STATFS_F_FLAGS symbol, which indicates to struct statfs from has f_flags member. This kind of struct statfs is coming from sys/mount.h (BSD ), not from sys/statfs.h (SYSV ).

• d_statfs_s

  From d_statfs_s.U:

  This variable conditionally defines the HAS_STRUCT_STATFS symbol, which indicates that the struct statfs is supported.

• d_static_inline

  From d_static_inline.U:

  This variable conditionally defines the HAS_STATIC_INLINE symbol, which indicates that the C compiler supports C99-style static inline. That is, the function can't be called from another translation unit.

• d_statvfs

  From d_statvfs.U:

  This variable conditionally defines the HAS_STATVFS symbol, which indicates to the C program that the statvfs() routine is available.

• d_stdio_cnt_lval

  From d_stdstdio.U:

  This variable conditionally defines STDIO_CNT_LVALUE if the FILE_cnt macro can be used as an lvalue.

• d_stdio_ptr_lval

  From d_stdstdio.U:

  This variable conditionally defines STDIO_PTR_LVALUE if the FILE_ptr macro can be used as an lvalue.

• d_stdio_ptr_lval_nochange_cnt

  From d_stdstdio.U:

  This symbol is defined if using the FILE_ptr macro as an lvalue to increase the pointer by n leaves File_cnt(fp) unchanged.

• d_stdio_ptr_lval_sets_cnt

  From d_stdstdio.U:

  This symbol is defined if using the FILE_ptr macro as an lvalue to increase the pointer by n has the side effect of decreasing the value of File_cnt(fp) by n.

• d_stdio_stream_array

  From stdio_streams.U:

  This variable tells whether there is an array holding the stdio streams.

• d_stdiobase

  From d_stdstdio.U:

  This variable conditionally defines USE_STDIO_BASE if this system has a FILE structure declaring a usable _base field (or equivalent) in stdio.h.

• d_stdstdio

  From d_stdstdio.U:

  This variable conditionally defines USE_STDIO_PTR if this system has a FILE structure declaring usable _ptr and _cnt fields (or equivalent) in stdio.h.

• d_strcoll

  From d_strcoll.U:

  This variable conditionally defines HAS_STRCOLL if strcoll() is available to compare strings using collating information.

• d_strerror_l

  From d_strerror_l.U:

  This variable conditionally defines the HAS_STRERROR_L symbol, which indicates to the C program that the strerror_l() routine is available to return the error message for a given errno value in a particular locale (identified by a locale_t object).

• d_strerror_r

  From d_strerror_r.U:

  This variable conditionally defines the HAS_STRERROR_R symbol, which indicates to the C program that the strerror_r() routine is available.

• d_strftime

  From d_strftime.U:

  This variable conditionally defines the HAS_STRFTIME symbol, which indicates to the C program that the strftime() routine is available.

• d_strlcat

  From d_strlcat.U:

  This variable conditionally defines the HAS_STRLCAT symbol, which indicates to the C program that the strlcat () routine is available.

• d_strlcpy

  From d_strlcpy.U:

  This variable conditionally defines the HAS_STRLCPY symbol, which indicates to the C program that the strlcpy () routine is available.

• d_strnlen

  From d_strnlen.U:

  This variable conditionally defines the HAS_STRNLEN symbol, which indicates to the C program that the strnlen () routine is available.

• d_strtod

  From d_strtod.U:

  This variable conditionally defines the HAS_STRTOD symbol, which indicates to the C program that the strtod() routine is available to provide better numeric string conversion than atof().

• d_strtod_l

  From d_strtod_l.U:

  This variable conditionally defines the HAS_STRTOD_L symbol, which indicates to the C program that the strtod_l() routine is available.

• d_strtol

  From d_strtol.U:

  This variable conditionally defines the HAS_STRTOL symbol, which indicates to the C program that the strtol() routine is available to provide better numeric string conversion than atoi() and friends.

• d_strtold

  From d_strtold.U:

  This variable conditionally defines the HAS_STRTOLD symbol, which indicates to the C program that the strtold() routine is available.

• d_strtold_l

  From d_strtold_l.U:

  This variable conditionally defines the HAS_STRTOLD_L symbol, which indicates to the C program that the strtold_l() routine is available.

• d_strtoll

  From d_strtoll.U:

  This variable conditionally defines the HAS_STRTOLL symbol, which indicates to the C program that the strtoll() routine is available.

• d_strtoq

  From d_strtoq.U:

  This variable conditionally defines the HAS_STRTOQ symbol, which indicates to the C program that the strtoq() routine is available.

• d_strtoul

  From d_strtoul.U:

  This variable conditionally defines the HAS_STRTOUL symbol, which indicates to the C program that the strtoul() routine is available to provide conversion of strings to unsigned long.

• d_strtoull

  From d_strtoull.U:

  This variable conditionally defines the HAS_STRTOULL symbol, which indicates to the C program that the strtoull() routine is available.

• d_strtouq

  From d_strtouq.U:

  This variable conditionally defines the HAS_STRTOUQ symbol, which indicates to the C program that the strtouq() routine is available.

• d_strxfrm

  From d_strxfrm.U:

  This variable conditionally defines HAS_STRXFRM if strxfrm() is available to transform strings.

• d_suidsafe

  From d_dosuid.U:

  This variable conditionally defines SETUID_SCRIPTS_ARE_SECURE_NOW if setuid scripts can be secure. This test looks in /dev/fd/.

• d_symlink

  From d_symlink.U:

  This variable conditionally defines the HAS_SYMLINK symbol, which indicates to the C program that the symlink() routine is available to create symbolic links.

• d_syscall

  From d_syscall.U:

  This variable conditionally defines HAS_SYSCALL if syscall() is available call arbitrary system calls.

• d_syscallproto

  From d_syscallproto.U:

  This variable conditionally defines the HAS_SYSCALL_PROTO symbol, which indicates to the C program that the system provides a prototype for the syscall() function. Otherwise, it is up to the program to supply one.

• d_sysconf

  From d_sysconf.U:

  This variable conditionally defines the HAS_SYSCONF symbol, which indicates to the C program that the sysconf() routine is available to determine system related limits and options.

• d_sysernlst

  From d_strerror.U:

  This variable conditionally defines HAS_SYS_ERRNOLIST if sys_errnolist[] is available to translate error numbers to the symbolic name.

• d_syserrlst

  From d_strerror.U:

  This variable conditionally defines HAS_SYS_ERRLIST if sys_errlist[] is available to translate error numbers to strings.

• d_system

  From d_system.U:

  This variable conditionally defines HAS_SYSTEM if system() is available to issue a shell command.

• d_tcgetpgrp

  From d_tcgtpgrp.U:

  This variable conditionally defines the HAS_TCGETPGRP symbol, which indicates to the C program that the tcgetpgrp() routine is available. to get foreground process group ID .

• d_tcsetpgrp

  From d_tcstpgrp.U:

  This variable conditionally defines the HAS_TCSETPGRP symbol, which indicates to the C program that the tcsetpgrp() routine is available to set foreground process group ID .

• d_telldir

  From d_readdir.U:

  This variable conditionally defines HAS_TELLDIR if telldir() is available.

• d_telldirproto

  From d_telldirproto.U:

  This variable conditionally defines the HAS_TELLDIR_PROTO symbol, which indicates to the C program that the system provides a prototype for the telldir() function. Otherwise, it is up to the program to supply one.

• d_tgamma

  From d_tgamma.U:

  This variable conditionally defines the HAS_TGAMMA symbol, which indicates to the C program that the tgamma() routine is available for the gamma function. See also d_lgamma.

• d_thread_safe_nl_langinfo_l

  From d_nl_langinfo_l.U:

  This variable contains the eventual value of the HAS_THREAD_SAFE_NL_LANGINFO_L symbol, which indicates if the nl_langinfo_l() function exists and is thread-safe.

• d_time

  From d_time.U:

  This variable conditionally defines the HAS_TIME symbol, which indicates that the time() routine exists. The time() routine is normally provided on UNIX systems.

• d_timegm

  From d_timegm.U:

  This variable conditionally defines the HAS_TIMEGM symbol, which indicates to the C program that the timegm () routine is available.

• d_times

  From d_times.U:

  This variable conditionally defines the HAS_TIMES symbol, which indicates that the times() routine exists. The times() routine is normally provided on UNIX systems. You may have to include <sys/times.h>.

• d_tm_tm_gmtoff

  From i_time.U:

  This variable conditionally defines HAS_TM_TM_GMTOFF , which indicates to the C program that the struct tm has the tm_gmtoff field.

• d_tm_tm_zone

  From i_time.U:

  This variable conditionally defines HAS_TM_TM_ZONE , which indicates to the C program that the struct tm has the tm_zone field.

• d_tmpnam_r

  From d_tmpnam_r.U:

  This variable conditionally defines the HAS_TMPNAM_R symbol, which indicates to the C program that the tmpnam_r() routine is available.

• d_towlower

  From d_towlower.U:

  This variable conditionally defines the HAS_TOWLOWER symbol, which indicates to the C program that the towlower() routine is available.

• d_towupper

  From d_towupper.U:

  This variable conditionally defines the HAS_TOWUPPER symbol, which indicates to the C program that the towupper() routine is available.

• d_trunc

  From d_trunc.U:

  This variable conditionally defines the HAS_TRUNC symbol, which indicates to the C program that the trunc() routine is available to round doubles towards zero.

• d_truncate

  From d_truncate.U:

  This variable conditionally defines HAS_TRUNCATE if truncate() is available to truncate files.

• d_truncl

  From d_truncl.U:

  This variable conditionally defines the HAS_TRUNCL symbol, which indicates to the C program that the truncl() routine is available to round long doubles towards zero. If copysignl is also present, we can emulate modfl.

• d_ttyname_r

  From d_ttyname_r.U:

  This variable conditionally defines the HAS_TTYNAME_R symbol, which indicates to the C program that the ttyname_r() routine is available.

• d_tzname

  From d_tzname.U:

  This variable conditionally defines HAS_TZNAME if tzname[] is available to access timezone names.

• d_u32align

  From d_u32align.U:

  This variable tells whether you must access character data through U32-aligned pointers.

• d_ualarm

  From d_ualarm.U:

  This variable conditionally defines the HAS_UALARM symbol, which indicates to the C program that the ualarm() routine is available.

• d_umask

  From d_umask.U:

  This variable conditionally defines the HAS_UMASK symbol, which indicates to the C program that the umask() routine is available. to set and get the value of the file creation mask.

• d_uname

  From d_gethname.U:

  This variable conditionally defines the HAS_UNAME symbol, which indicates to the C program that the uname() routine may be used to derive the host name.

• d_union_semun

  From d_union_semun.U:

  This variable conditionally defines HAS_UNION_SEMUN if the union semun is defined by including <sys/sem.h>.

• d_unlinkat

  From d_fsat.U:

  This variable conditionally defines the HAS_UNLINKAT symbol, which indicates the POSIX unlinkat() function isavailable.

• d_unordered

  From d_unordered.U:

  This variable conditionally defines the HAS_UNORDERED symbol, which indicates to the C program that the unordered() routine is available.

• d_unsetenv

  From d_unsetenv.U:

  This variable conditionally defines the HAS_UNSETENV symbol, which indicates to the C program that the unsetenv () routine is available.

• d_uselocale

  From d_newlocale.U:

  This variable conditionally defines the HAS_USELOCALE symbol, which indicates to the C program that the uselocale() routine is available to set the current locale for the calling thread.

• d_usleep

  From d_usleep.U:

  This variable conditionally defines HAS_USLEEP if usleep() is available to do high granularity sleeps.

• d_usleepproto

  From d_usleepproto.U:

  This variable conditionally defines the HAS_USLEEP_PROTO symbol, which indicates to the C program that the system provides a prototype for the usleep() function. Otherwise, it is up to the program to supply one.

• d_ustat

  From d_ustat.U:

  This variable conditionally defines HAS_USTAT if ustat() is available to query file system statistics by dev_t.

• d_vendorarch

  From vendorarch.U:

  This variable conditionally defined PERL_VENDORARCH .

• d_vendorbin

  From vendorbin.U:

  This variable conditionally defines PERL_VENDORBIN .

• d_vendorlib

  From vendorlib.U:

  This variable conditionally defines PERL_VENDORLIB .

• d_vendorscript

  From vendorscript.U:

  This variable conditionally defines PERL_VENDORSCRIPT .

• d_vfork

  From d_vfork.U:

  This variable conditionally defines the HAS_VFORK symbol, which indicates the vfork() routine is available.

• d_void_closedir

  From d_closedir.U:

  This variable conditionally defines VOID_CLOSEDIR if closedir() does not return a value.

• d_voidsig

  From d_voidsig.U:

  This variable conditionally defines VOIDSIG if this system declares "void (*signal(...))()" in signal.h. The old way was to declare it as "int (*signal(...))()".

• d_voidtty

  From i_sysioctl.U:

  This variable conditionally defines USE_IOCNOTTY to indicate that the ioctl() call with TIOCNOTTY should be used to void tty association. Otherwise (on USG probably), it is enough to close the standard file descriptors and do a setpgrp().

• d_vsnprintf

  From d_snprintf.U:

  This variable conditionally defines the HAS_VSNPRINTF symbol, which indicates to the C program that the vsnprintf () library function is available.

• d_wait4

  From d_wait4.U:

  This variable conditionally defines the HAS_WAIT4 symbol, which indicates the wait4() routine is available.

• d_waitpid

  From d_waitpid.U:

  This variable conditionally defines HAS_WAITPID if waitpid() is available to wait for child process.

• d_wcscmp

  From d_wcscmp.U:

  This variable conditionally defines the HAS_WCSCMP symbol if the wcscmp() routine is available and can be used to compare wide character strings.

• d_wcstombs

  From d_wcstombs.U:

  This variable conditionally defines the HAS_WCSTOMBS symbol, which indicates to the C program that the wcstombs() routine is available to convert wide character strings to multibyte strings.

• d_wcsxfrm

  From d_wcsxfrm.U:

  This variable conditionally defines the HAS_WCSXFRM symbol if the wcsxfrm() routine is available and can be used to compare wide character strings.

• d_wctomb

  From d_wctomb.U:

  This variable conditionally defines the HAS_WCTOMB symbol, which indicates to the C program that the wctomb() routine is available to convert a wide character to a multibyte.

• d_writev

  From d_writev.U:

  This variable conditionally defines the HAS_WRITEV symbol, which indicates to the C program that the writev() routine is available.

• d_xenix

  From Guess.U:

  This variable conditionally defines the symbol XENIX , which alerts the C program that it runs under Xenix.

• date

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the date program. After Configure runs, the value is reset to a plain date and is not useful.

• db_hashtype

  From i_db.U:

  This variable contains the type of the hash structure element in the <db.h> header file. In older versions of DB , it was int, while in newer ones it is u_int32_t.

• db_prefixtype

  From i_db.U:

  This variable contains the type of the prefix structure element in the <db.h> header file. In older versions of DB , it was int, while in newer ones it is size_t.

• db_version_major

  From i_db.U:

  This variable contains the major version number of Berkeley DB found in the <db.h> header file.

• db_version_minor

  From i_db.U:

  This variable contains the minor version number of Berkeley DB found in the <db.h> header file. For DB version 1 this is always 0.

• db_version_patch

  From i_db.U:

  This variable contains the patch version number of Berkeley DB found in the <db.h> header file. For DB version 1 this is always 0.

• default_inc_excludes_dot

  From defaultincdot.U:

  When defined, remove the legacy . from @INC

• direntrytype

  From i_dirent.U:

  This symbol is set to struct direct or struct dirent depending on whether dirent is available or not. You should use this pseudo type to portably declare your directory entries.

• dlext

  From dlext.U:

  This variable contains the extension that is to be used for the dynamically loaded modules that perl generates.

• dlsrc

  From dlsrc.U:

  This variable contains the name of the dynamic loading file that will be used with the package.

• doubleinfbytes

  From infnan.U:

  This variable contains comma-separated list of hexadecimal bytes for the double precision infinity.

• doublekind

  From longdblfio.U:

  This variable, if defined, encodes the type of a double: 1 = IEEE 754 32-bit little endian, 2 = IEEE 754 32-bit big endian, 3 = IEEE 754 64-bit little endian, 4 = IEEE 754 64-bit big endian, 5 = IEEE 754 128-bit little endian, 6 = IEEE 754 128-bit big endian, 7 = IEEE 754 64-bit mixed endian le-be, 8 = IEEE 754 64-bit mixed endian be-le, 9 = VAX 32bit little endian F float format 10 = VAX 64bit little endian D float format 11 = VAX 64bit little endian G float format 12 = IBM 32bit format 13 = IBM 64bit format 14 = Cray 64bit format -1 = unknown format.

• doublemantbits

  From mantbits.U:

  This symbol, if defined, tells how many mantissa bits there are in double precision floating point format. Note that this is usually DBL_MANT_DIG minus one, since with the standard IEEE 754 formats DBL_MANT_DIG includes the implicit bit which doesn't really exist.

• doublenanbytes

  From infnan.U:

  This variable contains comma-separated list of hexadecimal bytes for the double precision not-a-number.

• doublesize

  From doublesize.U:

  This variable contains the value of the DOUBLESIZE symbol, which indicates to the C program how many bytes there are in a double.

• drand01

  From randfunc.U:

  Indicates the macro to be used to generate normalized random numbers. Uses randfunc, often divided by (double) (((unsigned long) 1 << randbits)) in order to normalize the result. In C programs, the macro Drand01 is mapped to drand01.

• drand48_r_proto

  From d_drand48_r.U:

  This variable encodes the prototype of drand48_r. It is zero if d_drand48_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r is defined.

• dtrace

  From usedtrace.U:

  This variable holds the location of the dtrace executable.

• dtraceobject

  From dtraceobject.U:

  Whether we need to build an object file with the dtrace tool.

• dtracexnolibs

  From dtraceobject.U:

  Whether dtrace accepts -xnolibs. If available we call dtrace -h and dtrace -G with -xnolibs to allow dtrace to run in a jail on FreeBSD.

• dynamic_ext

  From Extensions.U:

  This variable holds a list of XS extension files we want to link dynamically into the package. It is used by Makefile.

e

• eagain

  From nblock_io.U:

  This variable bears the symbolic errno code set by read() when no data is present on the file and non-blocking I/O was enabled (otherwise, read() blocks naturally).

• ebcdic

  From ebcdic.U:

  This variable conditionally defines EBCDIC if this system uses EBCDIC encoding.

• echo

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the echo program. After Configure runs, the value is reset to a plain echo and is not useful.

• egrep

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the egrep program. After Configure runs, the value is reset to a plain egrep and is not useful.

• emacs

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• endgrent_r_proto

  From d_endgrent_r.U:

  This variable encodes the prototype of endgrent_r. It is zero if d_endgrent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r is defined.

• endhostent_r_proto

  From d_endhostent_r.U:

  This variable encodes the prototype of endhostent_r. It is zero if d_endhostent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r is defined.

• endnetent_r_proto

  From d_endnetent_r.U:

  This variable encodes the prototype of endnetent_r. It is zero if d_endnetent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r is defined.

• endprotoent_r_proto

  From d_endprotoent_r.U:

  This variable encodes the prototype of endprotoent_r. It is zero if d_endprotoent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r is defined.

• endpwent_r_proto

  From d_endpwent_r.U:

  This variable encodes the prototype of endpwent_r. It is zero if d_endpwent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r is defined.

• endservent_r_proto

  From d_endservent_r.U:

  This variable encodes the prototype of endservent_r. It is zero if d_endservent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r is defined.

• eunicefix

  From Init.U:

  When running under Eunice this variable contains a command which will convert a shell script to the proper form of text file for it to be executable by the shell. On other systems it is a no-op.

• exe_ext

  From Unix.U:

  This is an old synonym for _exe.

• expr

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the expr program. After Configure runs, the value is reset to a plain expr and is not useful.

• extensions

  From Extensions.U:

  This variable holds a list of all extension files (both XS and non-xs) installed with the package. It is propagated to Config.pm and is typically used to test whether a particular extension is available.

• extern_C

  From Csym.U:

  ANSI C requires extern where C++ requires 'extern C '. This variable can be used in Configure to do the right thing.

• extras

  From Extras.U:

  This variable holds a list of extra modules to install.

f

• fflushall

  From fflushall.U:

  This symbol, if defined, tells that to flush all pending stdio output one must loop through all the stdio file handles stored in an array and fflush them. Note that if fflushNULL is defined, fflushall will not even be probed for and will be left undefined.

• fflushNULL

  From fflushall.U:

  This symbol, if defined, tells that fflush(NULL ) correctly flushes all pending stdio output without side effects. In particular, on some platforms calling fflush(NULL ) *still* corrupts STDIN if it is a pipe.

• find

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• firstmakefile

  From Unix.U:

  This variable defines the first file searched by make. On unix, it is makefile (then Makefile). On case-insensitive systems, it might be something else. This is only used to deal with convoluted make depend tricks.

• flex

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• fpossize

  From fpossize.U:

  This variable contains the size of a fpostype in bytes.

• fpostype

  From fpostype.U:

  This variable defines Fpos_t to be something like fpos_t, long, uint, or whatever type is used to declare file positions in libc.

• freetype

  From mallocsrc.U:

  This variable contains the return type of free(). It is usually void, but occasionally int.

• from

  From Cross.U:

  This variable contains the command used by Configure to copy files from the target host. Useful and available only during Perl build. The string : if not cross-compiling.

• full_ar

  From Loc_ar.U:

  This variable contains the full pathname to ar , whether or not the user has specified portability . This is only used in the Makefile.SH.

• full_csh

  From d_csh.U:

  This variable contains the full pathname to csh , whether or not the user has specified portability . This is only used in the compiled C program, and we assume that all systems which can share this executable will have the same full pathname to csh.

• full_sed

  From Loc_sed.U:

  This variable contains the full pathname to sed , whether or not the user has specified portability . This is only used in the compiled C program, and we assume that all systems which can share this executable will have the same full pathname to sed.

g

• gccansipedantic

  From gccvers.U:

  If GNU cc (gcc) is used, this variable will enable (if set) the -ansi and -pedantic ccflags for building core files (through cflags script). (See Porting/pumpkin.pod for full description).

• gccosandvers

  From gccvers.U:

  If GNU cc (gcc) is used, this variable holds the operating system and version used to compile gcc. It is set to '' if not gcc, or if nothing useful can be parsed as the os version.

• gccversion

  From gccvers.U:

  If GNU cc (gcc) is used, this variable holds 1 or 2 to indicate whether the compiler is version 1 or 2. This is used in setting some of the default cflags. It is set to '' if not gcc.

• getgrent_r_proto

  From d_getgrent_r.U:

  This variable encodes the prototype of getgrent_r. It is zero if d_getgrent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r is defined.

• getgrgid_r_proto

  From d_getgrgid_r.U:

  This variable encodes the prototype of getgrgid_r. It is zero if d_getgrgid_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r is defined.

• getgrnam_r_proto

  From d_getgrnam_r.U:

  This variable encodes the prototype of getgrnam_r. It is zero if d_getgrnam_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r is defined.

• gethostbyaddr_r_proto

  From d_gethostbyaddr_r.U:

  This variable encodes the prototype of gethostbyaddr_r. It is zero if d_gethostbyaddr_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r is defined.

• gethostbyname_r_proto

  From d_gethostbyname_r.U:

  This variable encodes the prototype of gethostbyname_r. It is zero if d_gethostbyname_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r is defined.

• gethostent_r_proto

  From d_gethostent_r.U:

  This variable encodes the prototype of gethostent_r. It is zero if d_gethostent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r is defined.

• getlogin_r_proto

  From d_getlogin_r.U:

  This variable encodes the prototype of getlogin_r. It is zero if d_getlogin_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r is defined.

• getnetbyaddr_r_proto

  From d_getnetbyaddr_r.U:

  This variable encodes the prototype of getnetbyaddr_r. It is zero if d_getnetbyaddr_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r is defined.

• getnetbyname_r_proto

  From d_getnetbyname_r.U:

  This variable encodes the prototype of getnetbyname_r. It is zero if d_getnetbyname_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r is defined.

• getnetent_r_proto

  From d_getnetent_r.U:

  This variable encodes the prototype of getnetent_r. It is zero if d_getnetent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r is defined.

• getprotobyname_r_proto

  From d_getprotobyname_r.U:

  This variable encodes the prototype of getprotobyname_r. It is zero if d_getprotobyname_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r is defined.

• getprotobynumber_r_proto

  From d_getprotobynumber_r.U:

  This variable encodes the prototype of getprotobynumber_r. It is zero if d_getprotobynumber_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r is defined.

• getprotoent_r_proto

  From d_getprotoent_r.U:

  This variable encodes the prototype of getprotoent_r. It is zero if d_getprotoent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r is defined.

• getpwent_r_proto

  From d_getpwent_r.U:

  This variable encodes the prototype of getpwent_r. It is zero if d_getpwent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r is defined.

• getpwnam_r_proto

  From d_getpwnam_r.U:

  This variable encodes the prototype of getpwnam_r. It is zero if d_getpwnam_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r is defined.

• getpwuid_r_proto

  From d_getpwuid_r.U:

  This variable encodes the prototype of getpwuid_r. It is zero if d_getpwuid_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r is defined.

• getservbyname_r_proto

  From d_getservbyname_r.U:

  This variable encodes the prototype of getservbyname_r. It is zero if d_getservbyname_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r is defined.

• getservbyport_r_proto

  From d_getservbyport_r.U:

  This variable encodes the prototype of getservbyport_r. It is zero if d_getservbyport_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r is defined.

• getservent_r_proto

  From d_getservent_r.U:

  This variable encodes the prototype of getservent_r. It is zero if d_getservent_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r is defined.

• getspnam_r_proto

  From d_getspnam_r.U:

  This variable encodes the prototype of getspnam_r. It is zero if d_getspnam_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r is defined.

• gidformat

  From gidf.U:

  This variable contains the format string used for printing a Gid_t.

• gidsign

  From gidsign.U:

  This variable contains the signedness of a gidtype. 1 for unsigned, -1 for signed.

• gidsize

  From gidsize.U:

  This variable contains the size of a gidtype in bytes.

• gidtype

  From gidtype.U:

  This variable defines Gid_t to be something like gid_t, int, ushort, or whatever type is used to declare the return type of getgid(). Typically, it is the type of group ids in the kernel.

• glibpth

  From libpth.U:

  This variable holds the general path (space-separated) used to find libraries. It may contain directories that do not exist on this platform, libpth is the cleaned-up version.

• gmake

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the gmake program. After Configure runs, the value is reset to a plain gmake and is not useful.

• gmtime_r_proto

  From d_gmtime_r.U:

  This variable encodes the prototype of gmtime_r. It is zero if d_gmtime_r is undef, and one of the REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r is defined.

• gnulibc_version

  From d_gnulibc.U:

  This variable contains the version number of the GNU C library. It is usually something like 2.2.5. It is a plain '' if this is not the GNU C library, or if the version is unknown.

• grep

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the grep program. After Configure runs, the value is reset to a plain grep and is not useful.

• groupcat

  From nis.U:

  This variable contains a command that produces the text of the /etc/group file. This is normally "cat /etc/group", but can be "ypcat group" when NIS is used. On some systems, such as os390, there may be no equivalent command, in which case this variable is unset.

• groupstype

  From groupstype.U:

  This variable defines Groups_t to be something like gid_t, int, ushort, or whatever type is used for the second argument to getgroups() and setgroups(). Usually, this is the same as gidtype (gid_t), but sometimes it isn't.

• gzip

  From Loc.U:

  This variable is used internally by Configure to determine the full pathname (if any) of the gzip program. After Configure runs, the value is reset to a plain gzip and is not useful.

h

• h_fcntl

  From h_fcntl.U:

  This is variable gets set in various places to tell i_fcntl that <fcntl.h> should be included.

• h_sysfile

  From h_sysfile.U:

  This is variable gets set in various places to tell i_sys_file that <sys/file.h> should be included.

• hint

  From Oldconfig.U:

  Gives the type of hints used for previous answers. May be one of default, recommended or previous .

• hostcat

  From nis.U:

  This variable contains a command that produces the text of the /etc/hosts file. This is normally "cat /etc/hosts", but can be "ypcat hosts" when NIS is used. On some systems, such as os390, there may be no equivalent command, in which case this variable is unset.

• hostgenerate

  From Cross.U:

  This variable contains the path to a generate_uudmap binary that can be run on the host OS when cross-compiling. Useful and available only during Perl build. Empty string '' if not cross-compiling.

• hostosname

  From Cross.U:

  This variable contains the original value of $^O for hostperl when cross-compiling. This is useful to pick the proper tools when running build code in the host. Empty string '' if not cross-compiling.

• hostperl

  From Cross.U:

  This variable contains the path to a miniperl binary that can be run on the host OS when cross-compiling. Useful and available only during Perl build. Empty string '' if not cross-compiling.

• html1dir

  From html1dir.U:

  This variable contains the name of the directory in which html source pages are to be put. This directory is for pages that describe whole programs, not libraries or modules. It is intended to correspond roughly to section 1 of the Unix manuals.

• html1direxp

  From html1dir.U:

  This variable is the same as the html1dir variable, but is filename expanded at configuration time, for convenient use in makefiles.

• html3dir

  From html3dir.U:

  This variable contains the name of the directory in which html source pages are to be put. This directory is for pages that describe libraries or modules. It is intended to correspond roughly to section 3 of the Unix manuals.

• html3direxp

  From html3dir.U:

  This variable is the same as the html3dir variable, but is filename expanded at configuration time, for convenient use in makefiles.

i

• i16size

  From perlxv.U:

  This variable is the size of an I16 in bytes.

• i16type

  From perlxv.U:

  This variable contains the C type used for Perl's I16.

• i32size

  From perlxv.U:

  This variable is the size of an I32 in bytes.

• i32type

  From perlxv.U:

  This variable contains the C type used for Perl's I32.

• i64size

  From perlxv.U:

  This variable is the size of an I64 in bytes.

• i64type

  From perlxv.U:

  This variable contains the C type used for Perl's I64.

• i8size

  From perlxv.U:

  This variable is the size of an I8 in bytes.

• i8type

  From perlxv.U:

  This variable contains the C type used for Perl's I8.

• i_arpainet

  From i_arpainet.U:

  This variable conditionally defines the I_ARPA_INET symbol, and indicates whether a C program should include <arpa/inet.h>.

• i_bfd

  From i_bfd.U:

  This variable conditionally defines the I_BFD symbol, and indicates whether a C program can include <bfd.h>.

• i_bsdioctl

  From i_sysioctl.U:

  This variable conditionally defines the I_SYS_BSDIOCTL symbol, which indicates to the C program that <sys/bsdioctl.h> exists and should be included.

• i_crypt

  From i_crypt.U:

  This variable conditionally defines the I_CRYPT symbol, and indicates whether a C program should include <crypt.h>.

• i_db

  From i_db.U:

  This variable conditionally defines the I_DB symbol, and indicates whether a C program may include Berkeley's DB include file <db.h>.

• i_dbm

  From i_dbm.U:

  This variable conditionally defines the I_DBM symbol, which indicates to the C program that <dbm.h> exists and should be included.

• i_dirent

  From i_dirent.U:

  This variable conditionally defines I_DIRENT , which indicates to the C program that it should include <dirent.h>.

• i_dlfcn

  From i_dlfcn.U:

  This variable conditionally defines the I_DLFCN symbol, which indicates to the C program that <dlfcn.h> exists and should be included.

• i_execinfo

  From i_execinfo.U:

  This variable conditionally defines the I_EXECINFO symbol, and indicates whether a C program may include <execinfo.h>, for backtrace() support.

• i_fcntl

  From i_fcntl.U:

  This variable controls the value of I_FCNTL (which tells the C program to include <fcntl.h>).

• i_fenv

  From i_fenv.U:

  This variable conditionally defines the I_FENV symbol, which indicates to the C program that <fenv.h> exists and should be included.

• i_fp

  From i_fp.U:

  This variable conditionally defines the I_FP symbol, and indicates whether a C program should include <fp.h>.

• i_fp_class

  From i_fp_class.U:

  This variable conditionally defines the I_FP_CLASS symbol, and indicates whether a C program should include <fp_class.h>.

• i_gdbm

  From i_gdbm.U:

  This variable conditionally defines the I_GDBM symbol, which indicates to the C program that <gdbm.h> exists and should be included.

• i_gdbm_ndbm

  From i_ndbm.U:

  This variable conditionally defines the I_GDBM_NDBM symbol, which indicates to the C program that <gdbm-ndbm.h> exists and should be included. This is the location of the ndbm.h compatibility file in Debian 4.0.

• i_gdbmndbm

  From i_ndbm.U:

  This variable conditionally defines the I_GDBMNDBM symbol, which indicates to the C program that <gdbm/ndbm.h> exists and should be included. This was the location of the ndbm.h compatibility file in RedHat 7.1.

• i_grp

  From i_grp.U:

  This variable conditionally defines the I_GRP symbol, and indicates whether a C program should include <grp.h>.

• i_ieeefp

  From i_ieeefp.U:

  This variable conditionally defines the I_IEEEFP symbol, and indicates whether a C program should include <ieeefp.h>.

• i_inttypes

  From i_inttypes.U:

  This variable conditionally defines the I_INTTYPES symbol, and indicates whether a C program should include <inttypes.h>.

• i_langinfo

  From i_langinfo.U:

  This variable conditionally defines the I_LANGINFO symbol, and indicates whether a C program should include <langinfo.h>.

• i_libutil

  From i_libutil.U:

  This variable conditionally defines the I_LIBUTIL symbol, and indicates whether a C program should include <libutil.h>.

• i_locale

  From i_locale.U:

  This variable conditionally defines the I_LOCALE symbol, and indicates whether a C program should include <locale.h>.

• i_machcthr

  From i_machcthr.U:

  This variable conditionally defines the I_MACH_CTHREADS symbol, and indicates whether a C program should include <mach/cthreads.h>.

• i_malloc

  From i_malloc.U:

  This variable conditionally defines the I_MALLOC symbol, and indicates whether a C program should include <malloc.h>.

• i_mallocmalloc

  From i_mallocmalloc.U:

  This variable conditionally defines the I_MALLOCMALLOC symbol, and indicates whether a C program should include <malloc/malloc.h>.

• i_mntent

  From i_mntent.U:

  This variable conditionally defines the I_MNTENT symbol, and indicates whether a C program should include <mntent.h>.

• i_ndbm

  From i_ndbm.U:

  This variable conditionally defines the I_NDBM symbol, which indicates to the C program that <ndbm.h> exists and should be included.

• i_netdb

  From i_netdb.U:

  This variable conditionally defines the I_NETDB symbol, and indicates whether a C program should include <netdb.h>.

• i_neterrno

  From i_neterrno.U:

  This variable conditionally defines the I_NET_ERRNO symbol, which indicates to the C program that <net/errno.h> exists and should be included.

• i_netinettcp

  From i_netinettcp.U:

  This variable conditionally defines the I_NETINET_TCP symbol, and indicates whether a C program should include <netinet/tcp.h>.

• i_niin

  From i_niin.U:

  This variable conditionally defines I_NETINET_IN , which indicates to the C program that it should include <netinet/in.h>. Otherwise, you may try <sys/in.h>.

• i_poll

  From i_poll.U:

  This variable conditionally defines the I_POLL symbol, and indicates whether a C program should include <poll.h>.

• i_prot

  From i_prot.U:

  This variable conditionally defines the I_PROT symbol, and indicates whether a C program should include <prot.h>.

• i_pthread

  From i_pthread.U:

  This variable conditionally defines the I_PTHREAD symbol, and indicates whether a C program should include <pthread.h>.

• i_pwd

  From i_pwd.U:

  This variable conditionally defines I_PWD , which indicates to the C program that it should include <pwd.h>.

• i_quadmath

  From i_quadmath.U:

  This variable conditionally defines I_QUADMATH , which indicates to the C program that it should include <quadmath.h>.

• i_rpcsvcdbm

  From i_dbm.U:

  This variable conditionally defines the I_RPCSVC_DBM symbol, which indicates to the C program that <rpcsvc/dbm.h> exists and should be included. Some System V systems might need this instead of <dbm.h>.

• i_sgtty

  From i_termio.U:

  This variable conditionally defines the I_SGTTY symbol, which indicates to the C program that it should include <sgtty.h> rather than <termio.h>.

• i_shadow

  From i_shadow.U:

  This variable conditionally defines the I_SHADOW symbol, and indicates whether a C program should include <shadow.h>.

• i_socks

  From i_socks.U:

  This variable conditionally defines the I_SOCKS symbol, and indicates whether a C program should include <socks.h>.

• i_stdbool

  From i_stdbool.U:

  This variable conditionally defines the I_STDBOOL symbol, which indicates to the C program that <stdbool.h> exists and should be included.

• i_stdint

  From i_stdint.U:

  This variable conditionally defines the I_STDINT symbol, which indicates to the C program that <stdint.h> exists and should be included.

• i_stdlib

  From i_stdlib.U:

  This variable unconditionally defines the I_STDLIB symbol.

• i_sunmath

  From i_sunmath.U:

  This variable conditionally defines the I_SUNMATH symbol, and indicates whether a C program should include <sunmath.h>.

• i_sysaccess

  From i_sysaccess.U:

  This variable conditionally defines the I_SYS_ACCESS symbol, and indicates whether a C program should include <sys/access.h>.

• i_sysdir

  From i_sysdir.U:

  This variable conditionally defines the I_SYS_DIR symbol, and indicates whether a C program should include <sys/dir.h>.

• i_sysfile

  From i_sysfile.U:

  This variable conditionally defines the I_SYS_FILE symbol, and indicates whether a C program should include <sys/file.h> to get R_OK and friends.

• i_sysfilio

  From i_sysioctl.U:

  This variable conditionally defines the I_SYS_FILIO symbol, which indicates to the C program that <sys/filio.h> exists and should be included in preference to <sys/ioctl.h>.

• i_sysin

  From i_niin.U:

  This variable conditionally defines I_SYS_IN , which indicates to the C program that it should include <sys/in.h> instead of <netinet/in.h>.

• i_sysioctl

  From i_sysioctl.U:

  This variable conditionally defines the I_SYS_IOCTL symbol, which indicates to the C program that <sys/ioctl.h> exists and should be included.

• i_syslog

  From i_syslog.U:

  This variable conditionally defines the I_SYSLOG symbol, and indicates whether a C program should include <syslog.h>.

• i_sysmman

  From i_sysmman.U:

  This variable conditionally defines the I_SYS_MMAN symbol, and indicates whether a C program should include <sys/mman.h>.

• i_sysmode

  From i_sysmode.U:

  This variable conditionally defines the I_SYSMODE symbol, and indicates whether a C program should include <sys/mode.h>.

• i_sysmount

  From i_sysmount.U:

  This variable conditionally defines the I_SYSMOUNT symbol, and indicates whether a C program should include <sys/mount.h>.

• i_sysndir

  From i_sysndir.U:

  This variable conditionally defines the I_SYS_NDIR symbol, and indicates whether a C program should include <sys/ndir.h>.

• i_sysparam

  From i_sysparam.U:

  This variable conditionally defines the I_SYS_PARAM symbol, and indicates whether a C program should include <sys/param.h>.

• i_syspoll

  From i_syspoll.U:

  This variable conditionally defines the I_SYS_POLL symbol, which indicates to the C program that it should include <sys/poll.h>.

• i_sysresrc

  From i_sysresrc.U:

  This variable conditionally defines the I_SYS_RESOURCE symbol, and indicates whether a C program should include <sys/resource.h>.

• i_syssecrt

  From i_syssecrt.U:

  This variable conditionally defines the I_SYS_SECURITY symbol, and indicates whether a C program should include <sys/security.h>.

• i_sysselct

  From i_sysselct.U:

  This variable conditionally defines I_SYS_SELECT , which indicates to the C program that it should include <sys/select.h> in order to get the definition of struct timeval.

• i_syssockio

  From i_sysioctl.U:

  This variable conditionally defines I_SYS_SOCKIO to indicate to the C program that socket ioctl codes may be found in <sys/sockio.h> instead of <sys/ioctl.h>.

• i_sysstat

  From i_sysstat.U:

  This variable conditionally defines the I_SYS_STAT symbol, and indicates whether a C program should include <sys/stat.h>.

• i_sysstatfs

  From i_sysstatfs.U:

  This variable conditionally defines the I_SYSSTATFS symbol, and indicates whether a C program should include <sys/statfs.h>.

• i_sysstatvfs

  From i_sysstatvfs.U:

  This variable conditionally defines the I_SYSSTATVFS symbol, and indicates whether a C program should include <sys/statvfs.h>.

• i_systime

  From i_time.U:

  This variable conditionally defines I_SYS_TIME , which indicates to the C program that it should include <sys/time.h>.

• i_systimek

  From i_time.U:

  This variable conditionally defines I_SYS_TIME_KERNEL , which indicates to the C program that it should include <sys/time.h> with KERNEL defined.

• i_systimes

  From i_systimes.U:

  This variable conditionally defines the I_SYS_TIMES symbol, and indicates whether a C program should include <sys/times.h>.

• i_systypes

  From i_systypes.U:

  This variable conditionally defines the I_SYS_TYPES symbol, and indicates whether a C program should include <sys/types.h>.

• i_sysuio

  From i_sysuio.U:

  This variable conditionally defines the I_SYSUIO symbol, and indicates whether a C program should include <sys/uio.h>.

• i_sysun

  From i_sysun.U:

  This variable conditionally defines I_SYS_UN , which indicates to the C program that it should include <sys/un.h> to get UNIX domain socket definitions.

• i_sysutsname

  From i_sysutsname.U:

  This variable conditionally defines the I_SYSUTSNAME symbol, and indicates whether a C program should include <sys/utsname.h>.

• i_sysvfs

  From i_sysvfs.U:

  This variable conditionally defines the I_SYSVFS symbol, and indicates whether a C program should include <sys/vfs.h>.

• i_syswait

  From i_syswait.U:

  This variable conditionally defines I_SYS_WAIT , which indicates to the C program that it should include <sys/wait.h>.

• i_termio

  From i_termio.U:

  This variable conditionally defines the I_TERMIO symbol, which indicates to the C program that it should include <termio.h> rather than <sgtty.h>.

• i_termios

  From i_termio.U:

  This variable conditionally defines the I_TERMIOS symbol, which indicates to the C program that the POSIX <termios.h> file is to be included.

• i_time

  From i_time.U:

  This variable unconditionally defines I_TIME , which indicates to the C program that it should include <time.h>.

• i_unistd

  From i_unistd.U:

  This variable conditionally defines the I_UNISTD symbol, and indicates whether a C program should include <unistd.h>.

• i_ustat

  From i_ustat.U:

  This variable conditionally defines the I_USTAT symbol, and indicates whether a C program should include <ustat.h>.

• i_utime

  From i_utime.U:

  This variable conditionally defines the I_UTIME symbol, and indicates whether a C program should include <utime.h>.

• i_vfork

  From i_vfork.U:

  This variable conditionally defines the I_VFORK symbol, and indicates whether a C program should include vfork.h.

• i_wchar

  From i_wchar.U:

  This variable conditionally defines the I_WCHAR symbol, that indicates whether a C program may include <wchar.h>.

• i_wctype

  From i_wctype.U:

  This variable conditionally defines the I_WCTYPE symbol, that indicates whether a C program may include <wctype.h>.

• i_xlocale

  From d_newlocale.U:

  This symbol, if defined, indicates to the C program that it should include <xlocale.h> to get uselocale() and its friends

• ignore_versioned_solibs

  From libs.U:

  This variable should be non-empty if non-versioned shared libraries (libfoo.so.x.y) are to be ignored (because they cannot be linked against).

• inc_version_list

  From inc_version_list.U:

  This variable specifies the list of subdirectories in over which perl.c:incpush() and lib/lib.pm will automatically search when adding directories to @INC . The elements in the list are separated by spaces. This is only useful if you have a perl library directory tree structured like the default one. See INSTALL for how this works. The versioned site_perl directory was introduced in 5.005, so that is the lowest possible value.

  This list includes architecture-dependent directories back to version $api_versionstring (e.g. 5.5.640) and architecture-independent directories all the way back to 5.005.

• inc_version_list_init

  From inc_version_list.U:

  This variable holds the same list as inc_version_list, but each item is enclosed in double quotes and separated by commas, suitable for use in the PERL_INC_VERSION_LIST initialization.

• incpath

  From usrinc.U:

  This variable must precede the normal include path to get the right one, as in $incpath/usr/include or $incpath/usr/lib. Value can be "" or /bsd43 on mips.

• incpth

  From libpth.U:

  This variable must precede the normal include path to get the right one, as in $incpath/usr/include or $incpath/usr/lib. Value can be "" or /bsd43 on mips.

• inews

  From Loc.U:

  This variable is defined but not used by Configure. The value is the empty string and is not useful.

• initialinstalllocation

  From bin.U:

  When userelocatableinc is true, this variable holds the location that make install should copy the perl binary to, with all the run-time relocatable paths calculated from this at install time. When used, it is initialized to the original value of binexp, and then binexp is set to .../, as the other binaries are found relative to the perl binary.

• installarchlib

  From archlib.U:

  This variable is really the same as archlibexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installbin

  From bin.U:

  This variable is the same as binexp unless AFS is running in which case the user is explicitly prompted for it. This variable should always be used in your makefiles for maximum portability.

• installhtml1dir

  From html1dir.U:

  This variable is really the same as html1direxp, unless you are using a different installprefix. For extra portability, you should only use this variable within your makefiles.

• installhtml3dir

  From html3dir.U:

  This variable is really the same as html3direxp, unless you are using a different installprefix. For extra portability, you should only use this variable within your makefiles.

• installman1dir

  From man1dir.U:

  This variable is really the same as man1direxp, unless you are using AFS in which case it points to the read/write location whereas man1direxp only points to the read-only access location. For extra portability, you should only use this variable within your makefiles.

• installman3dir

  From man3dir.U:

  This variable is really the same as man3direxp, unless you are using AFS in which case it points to the read/write location whereas man3direxp only points to the read-only access location. For extra portability, you should only use this variable within your makefiles.

• installprefix

  From installprefix.U:

  This variable holds the name of the directory below which "make install" will install the package. For most users, this is the same as prefix. However, it is useful for installing the software into a different (usually temporary) location after which it can be bundled up and moved somehow to the final location specified by prefix.

• installprefixexp

  From installprefix.U:

  This variable holds the full absolute path of installprefix with all ~-expansion done.

• installprivlib

  From privlib.U:

  This variable is really the same as privlibexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installscript

  From scriptdir.U:

  This variable is usually the same as scriptdirexp, unless you are on a system running AFS , in which case they may differ slightly. You should always use this variable within your makefiles for portability.

• installsitearch

  From sitearch.U:

  This variable is really the same as sitearchexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installsitebin

  From sitebin.U:

  This variable is usually the same as sitebinexp, unless you are on a system running AFS , in which case they may differ slightly. You should always use this variable within your makefiles for portability.

• installsitehtml1dir

  From sitehtml1dir.U:

  This variable is really the same as sitehtml1direxp, unless you are using AFS in which case it points to the read/write location whereas html1direxp only points to the read-only access location. For extra portability, you should only use this variable within your makefiles.

• installsitehtml3dir

  From sitehtml3dir.U:

  This variable is really the same as sitehtml3direxp, unless you are using AFS in which case it points to the read/write location whereas html3direxp only points to the read-only access location. For extra portability, you should only use this variable within your makefiles.

• installsitelib

  From sitelib.U:

  This variable is really the same as sitelibexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installsiteman1dir

  From siteman1dir.U:

  This variable is really the same as siteman1direxp, unless you are using AFS in which case it points to the read/write location whereas man1direxp only points to the read-only access location. For extra portability, you should only use this variable within your makefiles.

• installsiteman3dir

  From siteman3dir.U:

  This variable is really the same as siteman3direxp, unless you are using AFS in which case it points to the read/write location whereas man3direxp only points to the read-only access location. For extra portability, you should only use this variable within your makefiles.

• installsitescript

  From sitescript.U:

  This variable is usually the same as sitescriptexp, unless you are on a system running AFS , in which case they may differ slightly. You should always use this variable within your makefiles for portability.

• installstyle

  From installstyle.U:

  This variable describes the style of the perl installation. This is intended to be useful for tools that need to manipulate entire perl distributions. Perl itself doesn't use this to find its libraries -- the library directories are stored directly in Config.pm. Currently, there are only two styles: lib and lib/perl5. The default library locations (e.g. privlib, sitelib) are either $prefix/lib or $prefix/lib/perl5. The former is useful if $prefix is a directory dedicated to perl (e.g. /opt/perl), while the latter is useful if $prefix is shared by many packages, e.g. if $prefix=/usr/local.

  Unfortunately, while this style variable is used to set defaults for all three directory hierarchies (core, vendor, and site), there is no guarantee that the same style is actually appropriate for all those directories. For example, $prefix might be /opt/perl, but $siteprefix might be /usr/local. (Perhaps, in retrospect, the lib style should never have been supported, but it did seem like a nice idea at the time.)

  The situation is even less clear for tools such as MakeMaker that can be used to install additional modules into non-standard places. For example, if a user intends to install a module into a private directory (perhaps by setting PREFIX on the Makefile.PL command line), then there is no reason to assume that the Configure-time $installstyle setting will be relevant for that PREFIX .

  This may later be extended to include other information, so be careful with pattern-matching on the results.

  For compatibility with perl5.005 and earlier, the default setting is based on whether or not $prefix contains the string perl .

• installusrbinperl

  From instubperl.U:

  This variable tells whether Perl should be installed also as /usr/bin/perl in addition to $installbin/perl

• installvendorarch

  From vendorarch.U:

  This variable is really the same as vendorarchexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installvendorbin

  From vendorbin.U:

  This variable is really the same as vendorbinexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installvendorhtml1dir

  From vendorhtml1dir.U:

  This variable is really the same as vendorhtml1direxp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installvendorhtml3dir

  From vendorhtml3dir.U:

  This variable is really the same as vendorhtml3direxp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installvendorlib

  From vendorlib.U:

  This variable is really the same as vendorlibexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installvendorman1dir

  From vendorman1dir.U:

  This variable is really the same as vendorman1direxp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installvendorman3dir

  From vendorman3dir.U:

  This variable is really the same as vendorman3direxp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• installvendorscript

  From vendorscript.U:

  This variable is really the same as vendorscriptexp but may differ on those systems using AFS . For extra portability, only this variable should be used in makefiles.

• intsize

  From intsize.U:

  This variable contains the value of the INTSIZE symbol, which indicates to the C program how many bytes there are in an int.

• issymlink

  From issymlink.U:

  This variable holds the test command to test for a symbolic link (if they are supported). Typical values include test -h and test -L .

• ivdformat

  From perlxvf.U:

  This variable contains the format string used for printing a Perl IV as a signed decimal integer.

• ivsize

  From perlxv.U:

  This variable is the size of an IV in bytes.

• ivtype

  From perlxv.U:

  This variable contains the C type used for Perl's IV .