Perl 5 version documentation

IO::Compress::Bzip2

NAME

IO::Compress::Bzip2 - Write bzip2 files/buffers

SYNOPSIS

  1. use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
  2. my $status = bzip2 $input => $output [,OPTS]
  3. or die "bzip2 failed: $Bzip2Error\n";
  4. my $z = new IO::Compress::Bzip2 $output [,OPTS]
  5. or die "bzip2 failed: $Bzip2Error\n";
  6. $z->print($string);
  7. $z->printf($format, $string);
  8. $z->write($string);
  9. $z->syswrite($string [, $length, $offset]);
  10. $z->flush();
  11. $z->tell();
  12. $z->eof();
  13. $z->seek($position, $whence);
  14. $z->binmode();
  15. $z->fileno();
  16. $z->opened();
  17. $z->autoflush();
  18. $z->input_line_number();
  19. $z->newStream( [OPTS] );
  20. $z->close() ;
  21. $Bzip2Error ;
  22. # IO::File mode
  23. print $z $string;
  24. printf $z $format, $string;
  25. tell $z
  26. eof $z
  27. seek $z, $position, $whence
  28. binmode $z
  29. fileno $z
  30. close $z ;

DESCRIPTION

This module provides a Perl interface that allows writing bzip2 compressed data to files or buffer.

For reading bzip2 files/buffers, see the companion module IO::Uncompress::Bunzip2.

Functional Interface

A top-level function, bzip2 , is provided to carry out "one-shot" compression between buffers and/or files. For finer control over the compression process, see the OO Interface section.

  1. use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
  2. bzip2 $input_filename_or_reference => $output_filename_or_reference [,OPTS]
  3. or die "bzip2 failed: $Bzip2Error\n";

The functional interface needs Perl5.005 or better.

bzip2 $input_filename_or_reference => $output_filename_or_reference [, OPTS]

bzip2 expects at least two parameters, $input_filename_or_reference and $output_filename_or_reference .

The $input_filename_or_reference parameter

The parameter, $input_filename_or_reference , is used to define the source of the uncompressed data.

It can take one of the following forms:

  • A filename

    If the <$input_filename_or_reference> parameter is a simple scalar, it is assumed to be a filename. This file will be opened for reading and the input data will be read from it.

  • A filehandle

    If the $input_filename_or_reference parameter is a filehandle, the input data will be read from it. The string '-' can be used as an alias for standard input.

  • A scalar reference

    If $input_filename_or_reference is a scalar reference, the input data will be read from $$input_filename_or_reference .

  • An array reference

    If $input_filename_or_reference is an array reference, each element in the array must be a filename.

    The input data will be read from each file in turn.

    The complete array will be walked to ensure that it only contains valid filenames before any data is compressed.

  • An Input FileGlob string

    If $input_filename_or_reference is a string that is delimited by the characters "<" and ">" bzip2 will assume that it is an input fileglob string. The input is the list of files that match the fileglob.

    See File::GlobMapper for more details.

If the $input_filename_or_reference parameter is any other type, undef will be returned.

The $output_filename_or_reference parameter

The parameter $output_filename_or_reference is used to control the destination of the compressed data. This parameter can take one of these forms.

  • A filename

    If the $output_filename_or_reference parameter is a simple scalar, it is assumed to be a filename. This file will be opened for writing and the compressed data will be written to it.

  • A filehandle

    If the $output_filename_or_reference parameter is a filehandle, the compressed data will be written to it. The string '-' can be used as an alias for standard output.

  • A scalar reference

    If $output_filename_or_reference is a scalar reference, the compressed data will be stored in $$output_filename_or_reference .

  • An Array Reference

    If $output_filename_or_reference is an array reference, the compressed data will be pushed onto the array.

  • An Output FileGlob

    If $output_filename_or_reference is a string that is delimited by the characters "<" and ">" bzip2 will assume that it is an output fileglob string. The output is the list of files that match the fileglob.

    When $output_filename_or_reference is an fileglob string, $input_filename_or_reference must also be a fileglob string. Anything else is an error.

    See File::GlobMapper for more details.

If the $output_filename_or_reference parameter is any other type, undef will be returned.

Notes

When $input_filename_or_reference maps to multiple files/buffers and $output_filename_or_reference is a single file/buffer the input files/buffers will be stored in $output_filename_or_reference as a concatenated series of compressed data streams.

Optional Parameters

Unless specified below, the optional parameters for bzip2 , OPTS , are the same as those used with the OO interface defined in the Constructor Options section below.

  • AutoClose => 0|1

    This option applies to any input or output data streams to bzip2 that are filehandles.

    If AutoClose is specified, and the value is true, it will result in all input and/or output filehandles being closed once bzip2 has completed.

    This parameter defaults to 0.

  • BinModeIn => 0|1

    When reading from a file or filehandle, set binmode before reading.

    Defaults to 0.

  • Append => 0|1

    The behaviour of this option is dependent on the type of output data stream.

    • A Buffer

      If Append is enabled, all compressed data will be append to the end of the output buffer. Otherwise the output buffer will be cleared before any compressed data is written to it.

    • A Filename

      If Append is enabled, the file will be opened in append mode. Otherwise the contents of the file, if any, will be truncated before any compressed data is written to it.

    • A Filehandle

      If Append is enabled, the filehandle will be positioned to the end of the file via a call to seek before any compressed data is written to it. Otherwise the file pointer will not be moved.

    When Append is specified, and set to true, it will append all compressed data to the output data stream.

    So when the output is a filehandle it will carry out a seek to the eof before writing any compressed data. If the output is a filename, it will be opened for appending. If the output is a buffer, all compressed data will be appended to the existing buffer.

    Conversely when Append is not specified, or it is present and is set to false, it will operate as follows.

    When the output is a filename, it will truncate the contents of the file before writing any compressed data. If the output is a filehandle its position will not be changed. If the output is a buffer, it will be wiped before any compressed data is output.

    Defaults to 0.

Examples

To read the contents of the file file1.txt and write the compressed data to the file file1.txt.bz2 .

  1. use strict ;
  2. use warnings ;
  3. use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
  4. my $input = "file1.txt";
  5. bzip2 $input => "$input.bz2"
  6. or die "bzip2 failed: $Bzip2Error\n";

To read from an existing Perl filehandle, $input , and write the compressed data to a buffer, $buffer .

  1. use strict ;
  2. use warnings ;
  3. use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
  4. use IO::File ;
  5. my $input = new IO::File "<file1.txt"
  6. or die "Cannot open 'file1.txt': $!\n" ;
  7. my $buffer ;
  8. bzip2 $input => \$buffer
  9. or die "bzip2 failed: $Bzip2Error\n";

To compress all files in the directory "/my/home" that match "*.txt" and store the compressed data in the same directory

  1. use strict ;
  2. use warnings ;
  3. use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
  4. bzip2 '</my/home/*.txt>' => '<*.bz2>'
  5. or die "bzip2 failed: $Bzip2Error\n";

and if you want to compress each file one at a time, this will do the trick

  1. use strict ;
  2. use warnings ;
  3. use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
  4. for my $input ( glob "/my/home/*.txt" )
  5. {
  6. my $output = "$input.bz2" ;
  7. bzip2 $input => $output
  8. or die "Error compressing '$input': $Bzip2Error\n";
  9. }

OO Interface

Constructor

The format of the constructor for IO::Compress::Bzip2 is shown below

  1. my $z = new IO::Compress::Bzip2 $output [,OPTS]
  2. or die "IO::Compress::Bzip2 failed: $Bzip2Error\n";

It returns an IO::Compress::Bzip2 object on success and undef on failure. The variable $Bzip2Error will contain an error message on failure.

If you are running Perl 5.005 or better the object, $z , returned from IO::Compress::Bzip2 can be used exactly like an IO::File filehandle. This means that all normal output file operations can be carried out with $z . For example, to write to a compressed file/buffer you can use either of these forms

  1. $z->print("hello world\n");
  2. print $z "hello world\n";

The mandatory parameter $output is used to control the destination of the compressed data. This parameter can take one of these forms.

  • A filename

    If the $output parameter is a simple scalar, it is assumed to be a filename. This file will be opened for writing and the compressed data will be written to it.

  • A filehandle

    If the $output parameter is a filehandle, the compressed data will be written to it. The string '-' can be used as an alias for standard output.

  • A scalar reference

    If $output is a scalar reference, the compressed data will be stored in $$output .

If the $output parameter is any other type, IO::Compress::Bzip2 ::new will return undef.

Constructor Options

OPTS is any combination of the following options:

  • AutoClose => 0|1

    This option is only valid when the $output parameter is a filehandle. If specified, and the value is true, it will result in the $output being closed once either the close method is called or the IO::Compress::Bzip2 object is destroyed.

    This parameter defaults to 0.

  • Append => 0|1

    Opens $output in append mode.

    The behaviour of this option is dependent on the type of $output .

    • A Buffer

      If $output is a buffer and Append is enabled, all compressed data will be append to the end of $output . Otherwise $output will be cleared before any data is written to it.

    • A Filename

      If $output is a filename and Append is enabled, the file will be opened in append mode. Otherwise the contents of the file, if any, will be truncated before any compressed data is written to it.

    • A Filehandle

      If $output is a filehandle, the file pointer will be positioned to the end of the file via a call to seek before any compressed data is written to it. Otherwise the file pointer will not be moved.

    This parameter defaults to 0.

  • BlockSize100K => number

    Specify the number of 100K blocks bzip2 uses during compression.

    Valid values are from 1 to 9, where 9 is best compression.

    The default is 1.

  • WorkFactor => number

    Specifies how much effort bzip2 should take before resorting to a slower fallback compression algorithm.

    Valid values range from 0 to 250, where 0 means use the default value 30.

    The default is 0.

  • Strict => 0|1

    This is a placeholder option.

Examples

TODO

Methods

print

Usage is

  1. $z->print($data)
  2. print $z $data

Compresses and outputs the contents of the $data parameter. This has the same behaviour as the print built-in.

Returns true if successful.

printf

Usage is

  1. $z->printf($format, $data)
  2. printf $z $format, $data

Compresses and outputs the contents of the $data parameter.

Returns true if successful.

syswrite

Usage is

  1. $z->syswrite $data
  2. $z->syswrite $data, $length
  3. $z->syswrite $data, $length, $offset

Compresses and outputs the contents of the $data parameter.

Returns the number of uncompressed bytes written, or undef if unsuccessful.

write

Usage is

  1. $z->write $data
  2. $z->write $data, $length
  3. $z->write $data, $length, $offset

Compresses and outputs the contents of the $data parameter.

Returns the number of uncompressed bytes written, or undef if unsuccessful.

flush

Usage is

  1. $z->flush;

Flushes any pending compressed data to the output file/buffer.

TODO

Returns true on success.

tell

Usage is

  1. $z->tell()
  2. tell $z

Returns the uncompressed file offset.

eof

Usage is

  1. $z->eof();
  2. eof($z);

Returns true if the close method has been called.

seek

  1. $z->seek($position, $whence);
  2. seek($z, $position, $whence);

Provides a sub-set of the seek functionality, with the restriction that it is only legal to seek forward in the output file/buffer. It is a fatal error to attempt to seek backward.

Empty parts of the file/buffer will have NULL (0x00) bytes written to them.

The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.

Returns 1 on success, 0 on failure.

binmode

Usage is

  1. $z->binmode
  2. binmode $z ;

This is a noop provided for completeness.

opened

  1. $z->opened()

Returns true if the object currently refers to a opened file/buffer.

autoflush

  1. my $prev = $z->autoflush()
  2. my $prev = $z->autoflush(EXPR)

If the $z object is associated with a file or a filehandle, this method returns the current autoflush setting for the underlying filehandle. If EXPR is present, and is non-zero, it will enable flushing after every write/print operation.

If $z is associated with a buffer, this method has no effect and always returns undef.

Note that the special variable $| cannot be used to set or retrieve the autoflush setting.

input_line_number

  1. $z->input_line_number()
  2. $z->input_line_number(EXPR)

This method always returns undef when compressing.

fileno

  1. $z->fileno()
  2. fileno($z)

If the $z object is associated with a file or a filehandle, fileno will return the underlying file descriptor. Once the close method is called fileno will return undef.

If the $z object is associated with a buffer, this method will return undef.

close

  1. $z->close() ;
  2. close $z ;

Flushes any pending compressed data and then closes the output file/buffer.

For most versions of Perl this method will be automatically invoked if the IO::Compress::Bzip2 object is destroyed (either explicitly or by the variable with the reference to the object going out of scope). The exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In these cases, the close method will be called automatically, but not until global destruction of all live objects when the program is terminating.

Therefore, if you want your scripts to be able to run on all versions of Perl, you should call close explicitly and not rely on automatic closing.

Returns true on success, otherwise 0.

If the AutoClose option has been enabled when the IO::Compress::Bzip2 object was created, and the object is associated with a file, the underlying file will also be closed.

newStream([OPTS])

Usage is

  1. $z->newStream( [OPTS] )

Closes the current compressed data stream and starts a new one.

OPTS consists of any of the options that are available when creating the $z object.

See the Constructor Options section for more details.

Importing

No symbolic constants are required by this IO::Compress::Bzip2 at present.

  • :all

    Imports bzip2 and $Bzip2Error . Same as doing this

    1. use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;

EXAMPLES

Apache::GZip Revisited

See IO::Compress::FAQ

Working with Net::FTP

See IO::Compress::FAQ

SEE ALSO

Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate, IO::Uncompress::Inflate, IO::Compress::RawDeflate, IO::Uncompress::RawInflate, IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma, IO::Compress::Xz, IO::Uncompress::UnXz, IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf, IO::Uncompress::AnyInflate, IO::Uncompress::AnyUncompress

IO::Compress::FAQ

File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib

The primary site for the bzip2 program is http://www.bzip.org.

See the module Compress::Bzip2

AUTHOR

This module was written by Paul Marquess, pmqs@cpan.org .

MODIFICATION HISTORY

See the Changes file.

COPYRIGHT AND LICENSE

Copyright (c) 2005-2017 Paul Marquess. All rights reserved.

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.