Package applicationdiscoveryservice

* Agentless discovery mode is recommended for environments that use VMware
vCenter Server. This mode doesn't require you to install an agent on each
host. Agentless discovery gathers server information regardless of the
operating systems, which minimizes the time required for initial on-premises
infrastructure assessment. Agentless discovery doesn't collect information
about software and software dependencies. It also doesn't work in non-VMware
environments. We recommend that you use agent-based discovery for non-VMware
environments and if you want to collect information about software and
software dependencies. You can also run agent-based and agentless discovery
simultaneously. Use agentless discovery to quickly complete the initial
infrastructure assessment and then install agents on select hosts to gather
information about software and software dependencies.

* Agent-based discovery mode collects a richer set of data than agentless
discovery by using Amazon software, the AWS Application Discovery Agent,
which you install on one or more hosts in your data center. The agent
captures infrastructure and application information, including an inventory
of installed software applications, system and process performance, resource
utilization, and network dependencies between workloads. The information
collected by agents is secured at rest and in transit to the Application
Discovery Service database in the cloud.

// Create a session to share configuration, and load external configuration.
sess := session.Must(session.NewSession())

// Create the service's client with the session.
svc := applicationdiscoveryservice.New(sess)

result, err := svc.AssociateConfigurationItemsToApplication(params)
if err != nil {
    // Cast err to awserr.Error to handle specific error codes.
    aerr, ok := err.(awserr.Error)
    if ok && aerr.Code() == <error code to check for> {
        // Specific error code handling
    }
    return err
}

fmt.Println("AssociateConfigurationItemsToApplication result:")
fmt.Println(result)

ctx := context.Background()

result, err := svc.AssociateConfigurationItemsToApplicationWithContext(ctx, params)

Constants

const (
    // AgentStatusHealthy is a AgentStatus enum value
    AgentStatusHealthy = "HEALTHY"

    // AgentStatusUnhealthy is a AgentStatus enum value
    AgentStatusUnhealthy = "UNHEALTHY"

    // AgentStatusRunning is a AgentStatus enum value
    AgentStatusRunning = "RUNNING"

    // AgentStatusUnknown is a AgentStatus enum value
    AgentStatusUnknown = "UNKNOWN"

    // AgentStatusBlacklisted is a AgentStatus enum value
    AgentStatusBlacklisted = "BLACKLISTED"

    // AgentStatusShutdown is a AgentStatus enum value
    AgentStatusShutdown = "SHUTDOWN"
)

const (
    // ConfigurationItemTypeServer is a ConfigurationItemType enum value
    ConfigurationItemTypeServer = "SERVER"

    // ConfigurationItemTypeProcess is a ConfigurationItemType enum value
    ConfigurationItemTypeProcess = "PROCESS"

    // ConfigurationItemTypeConnection is a ConfigurationItemType enum value
    ConfigurationItemTypeConnection = "CONNECTION"

    // ConfigurationItemTypeApplication is a ConfigurationItemType enum value
    ConfigurationItemTypeApplication = "APPLICATION"
)

const (
    // ExportDataFormatCsv is a ExportDataFormat enum value
    ExportDataFormatCsv = "CSV"

    // ExportDataFormatGraphml is a ExportDataFormat enum value
    ExportDataFormatGraphml = "GRAPHML"
)

const (
    // ExportStatusFailed is a ExportStatus enum value
    ExportStatusFailed = "FAILED"

    // ExportStatusSucceeded is a ExportStatus enum value
    ExportStatusSucceeded = "SUCCEEDED"

    // ExportStatusInProgress is a ExportStatus enum value
    ExportStatusInProgress = "IN_PROGRESS"
)

const (
    // OrderStringAsc is a orderString enum value
    OrderStringAsc = "ASC"

    // OrderStringDesc is a orderString enum value
    OrderStringDesc = "DESC"
)

const (

    // ErrCodeAuthorizationErrorException for service response error code
    // "AuthorizationErrorException".
    //
    // The AWS user account does not have permission to perform the action. Check
    // the IAM policy associated with this account.
    ErrCodeAuthorizationErrorException = "AuthorizationErrorException"

    // ErrCodeInvalidParameterException for service response error code
    // "InvalidParameterException".
    //
    // One or more parameters are not valid. Verify the parameters and try again.
    ErrCodeInvalidParameterException = "InvalidParameterException"

    // ErrCodeInvalidParameterValueException for service response error code
    // "InvalidParameterValueException".
    //
    // The value of one or more parameters are either invalid or out of range. Verify
    // the parameter values and try again.
    ErrCodeInvalidParameterValueException = "InvalidParameterValueException"

    // ErrCodeOperationNotPermittedException for service response error code
    // "OperationNotPermittedException".
    //
    // This operation is not permitted.
    ErrCodeOperationNotPermittedException = "OperationNotPermittedException"

    // ErrCodeResourceNotFoundException for service response error code
    // "ResourceNotFoundException".
    //
    // The specified configuration ID was not located. Verify the configuration
    // ID and try again.
    ErrCodeResourceNotFoundException = "ResourceNotFoundException"

    // ErrCodeServerInternalErrorException for service response error code
    // "ServerInternalErrorException".
    //
    // The server experienced an internal error. Try again.
    ErrCodeServerInternalErrorException = "ServerInternalErrorException"
)

Service information constants

const (
    ServiceName = "discovery" // Service endpoint prefix API calls made to.
    EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

type AgentConfigurationStatus ¶

Information about agents or connectors that were instructed to start collecting data. Information includes the agent/connector ID, a description of the operation, and whether the agent/connector configuration was updated. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/AgentConfigurationStatus

type AgentConfigurationStatus struct {

    // The agent/connector ID.
    AgentId *string `locationName:"agentId" type:"string"`

    // A description of the operation performed.
    Description *string `locationName:"description" type:"string"`

    // Information about the status of the StartDataCollection and StopDataCollection
    // operations. The system has recorded the data collection operation. The agent/connector
    // receives this command the next time it polls for a new command.
    OperationSucceeded *bool `locationName:"operationSucceeded" type:"boolean"`
    // contains filtered or unexported fields
}

func (AgentConfigurationStatus) GoString ¶

func (s AgentConfigurationStatus) GoString() string

GoString returns the string representation

func (*AgentConfigurationStatus) SetAgentId ¶

func (s *AgentConfigurationStatus) SetAgentId(v string) *AgentConfigurationStatus

SetAgentId sets the AgentId field's value.

func (*AgentConfigurationStatus) SetDescription ¶

func (s *AgentConfigurationStatus) SetDescription(v string) *AgentConfigurationStatus

SetDescription sets the Description field's value.

func (*AgentConfigurationStatus) SetOperationSucceeded ¶

func (s *AgentConfigurationStatus) SetOperationSucceeded(v bool) *AgentConfigurationStatus

SetOperationSucceeded sets the OperationSucceeded field's value.

func (AgentConfigurationStatus) String ¶

func (s AgentConfigurationStatus) String() string

String returns the string representation

type AgentInfo ¶

Information about agents or connectors associated with the user’s AWS account. Information includes agent or connector IDs, IP addresses, media access control (MAC) addresses, agent or connector health, hostname where the agent or connector resides, and agent version for each agent. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/AgentInfo

type AgentInfo struct {

    // The agent or connector ID.
    AgentId *string `locationName:"agentId" type:"string"`

    // Network details about the host where the agent or connector resides.
    AgentNetworkInfoList []*AgentNetworkInfo `locationName:"agentNetworkInfoList" type:"list"`

    // Type of agent.
    AgentType *string `locationName:"agentType" type:"string"`

    // Status of the collection process for an agent or connector.
    CollectionStatus *string `locationName:"collectionStatus" type:"string"`

    // The ID of the connector.
    ConnectorId *string `locationName:"connectorId" type:"string"`

    // The health of the agent or connector.
    Health *string `locationName:"health" type:"string" enum:"AgentStatus"`

    // The name of the host where the agent or connector resides. The host can be
    // a server or virtual machine.
    HostName *string `locationName:"hostName" type:"string"`

    // Time since agent or connector health was reported.
    LastHealthPingTime *string `locationName:"lastHealthPingTime" type:"string"`

    // Agent's first registration timestamp in UTC.
    RegisteredTime *string `locationName:"registeredTime" type:"string"`

    // The agent or connector version.
    Version *string `locationName:"version" type:"string"`
    // contains filtered or unexported fields
}

func (AgentInfo) GoString ¶

func (s AgentInfo) GoString() string

GoString returns the string representation

func (*AgentInfo) SetAgentId ¶

func (s *AgentInfo) SetAgentId(v string) *AgentInfo

SetAgentId sets the AgentId field's value.

func (*AgentInfo) SetAgentNetworkInfoList ¶

func (s *AgentInfo) SetAgentNetworkInfoList(v []*AgentNetworkInfo) *AgentInfo

SetAgentNetworkInfoList sets the AgentNetworkInfoList field's value.

func (*AgentInfo) SetAgentType ¶

func (s *AgentInfo) SetAgentType(v string) *AgentInfo

SetAgentType sets the AgentType field's value.

func (*AgentInfo) SetCollectionStatus ¶

func (s *AgentInfo) SetCollectionStatus(v string) *AgentInfo

SetCollectionStatus sets the CollectionStatus field's value.

func (*AgentInfo) SetConnectorId ¶

func (s *AgentInfo) SetConnectorId(v string) *AgentInfo

SetConnectorId sets the ConnectorId field's value.

func (*AgentInfo) SetHealth ¶

func (s *AgentInfo) SetHealth(v string) *AgentInfo

SetHealth sets the Health field's value.

func (*AgentInfo) SetHostName ¶

func (s *AgentInfo) SetHostName(v string) *AgentInfo

SetHostName sets the HostName field's value.

func (*AgentInfo) SetLastHealthPingTime ¶

func (s *AgentInfo) SetLastHealthPingTime(v string) *AgentInfo

SetLastHealthPingTime sets the LastHealthPingTime field's value.

func (*AgentInfo) SetRegisteredTime ¶

func (s *AgentInfo) SetRegisteredTime(v string) *AgentInfo

SetRegisteredTime sets the RegisteredTime field's value.

func (*AgentInfo) SetVersion ¶

func (s *AgentInfo) SetVersion(v string) *AgentInfo

SetVersion sets the Version field's value.

func (AgentInfo) String ¶

func (s AgentInfo) String() string

String returns the string representation

type AgentNetworkInfo ¶

Network details about the host where the agent/connector resides. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/AgentNetworkInfo

type AgentNetworkInfo struct {

    // The IP address for the host where the agent/connector resides.
    IpAddress *string `locationName:"ipAddress" type:"string"`

    // The MAC address for the host where the agent/connector resides.
    MacAddress *string `locationName:"macAddress" type:"string"`
    // contains filtered or unexported fields
}

func (AgentNetworkInfo) GoString ¶

func (s AgentNetworkInfo) GoString() string

GoString returns the string representation

func (*AgentNetworkInfo) SetIpAddress ¶

func (s *AgentNetworkInfo) SetIpAddress(v string) *AgentNetworkInfo

SetIpAddress sets the IpAddress field's value.

func (*AgentNetworkInfo) SetMacAddress ¶

func (s *AgentNetworkInfo) SetMacAddress(v string) *AgentNetworkInfo

SetMacAddress sets the MacAddress field's value.

func (AgentNetworkInfo) String ¶

func (s AgentNetworkInfo) String() string

String returns the string representation

type ApplicationDiscoveryService ¶

ApplicationDiscoveryService provides the API operation methods for making requests to AWS Application Discovery Service. See this package's package overview docs for details on the service.

ApplicationDiscoveryService methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

type ApplicationDiscoveryService struct {
    *client.Client
}

func New ¶

func New(p client.ConfigProvider, cfgs ...*aws.Config) *ApplicationDiscoveryService

New creates a new instance of the ApplicationDiscoveryService client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a ApplicationDiscoveryService client from just a session.
svc := applicationdiscoveryservice.New(mySession)

// Create a ApplicationDiscoveryService client with additional configuration
svc := applicationdiscoveryservice.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*ApplicationDiscoveryService) AssociateConfigurationItemsToApplication ¶

func (c *ApplicationDiscoveryService) AssociateConfigurationItemsToApplication(input *AssociateConfigurationItemsToApplicationInput) (*AssociateConfigurationItemsToApplicationOutput, error)

AssociateConfigurationItemsToApplication API operation for AWS Application Discovery Service.

Associates one or more configuration items with an application.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation AssociateConfigurationItemsToApplication for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/AssociateConfigurationItemsToApplication

func (*ApplicationDiscoveryService) AssociateConfigurationItemsToApplicationRequest ¶

func (c *ApplicationDiscoveryService) AssociateConfigurationItemsToApplicationRequest(input *AssociateConfigurationItemsToApplicationInput) (req *request.Request, output *AssociateConfigurationItemsToApplicationOutput)

AssociateConfigurationItemsToApplicationRequest generates a "aws/request.Request" representing the client's request for the AssociateConfigurationItemsToApplication operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AssociateConfigurationItemsToApplication for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AssociateConfigurationItemsToApplication method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AssociateConfigurationItemsToApplicationRequest method.
req, resp := client.AssociateConfigurationItemsToApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/AssociateConfigurationItemsToApplication

func (*ApplicationDiscoveryService) AssociateConfigurationItemsToApplicationWithContext ¶

func (c *ApplicationDiscoveryService) AssociateConfigurationItemsToApplicationWithContext(ctx aws.Context, input *AssociateConfigurationItemsToApplicationInput, opts ...request.Option) (*AssociateConfigurationItemsToApplicationOutput, error)

AssociateConfigurationItemsToApplicationWithContext is the same as AssociateConfigurationItemsToApplication with the addition of the ability to pass a context and additional request options.

See AssociateConfigurationItemsToApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) CreateApplication ¶

func (c *ApplicationDiscoveryService) CreateApplication(input *CreateApplicationInput) (*CreateApplicationOutput, error)

CreateApplication API operation for AWS Application Discovery Service.

Creates an application with the given name and description.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation CreateApplication for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateApplication

func (*ApplicationDiscoveryService) CreateApplicationRequest ¶

func (c *ApplicationDiscoveryService) CreateApplicationRequest(input *CreateApplicationInput) (req *request.Request, output *CreateApplicationOutput)

CreateApplicationRequest generates a "aws/request.Request" representing the client's request for the CreateApplication operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateApplication for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateApplication method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateApplicationRequest method.
req, resp := client.CreateApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateApplication

func (*ApplicationDiscoveryService) CreateApplicationWithContext ¶

func (c *ApplicationDiscoveryService) CreateApplicationWithContext(ctx aws.Context, input *CreateApplicationInput, opts ...request.Option) (*CreateApplicationOutput, error)

CreateApplicationWithContext is the same as CreateApplication with the addition of the ability to pass a context and additional request options.

See CreateApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) CreateTags ¶

func (c *ApplicationDiscoveryService) CreateTags(input *CreateTagsInput) (*CreateTagsOutput, error)

CreateTags API operation for AWS Application Discovery Service.

Creates one or more tags for configuration items. Tags are metadata that help you categorize IT assets. This API accepts a list of multiple configuration items.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation CreateTags for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeResourceNotFoundException "ResourceNotFoundException"
The specified configuration ID was not located. Verify the configuration
ID and try again.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateTags

func (*ApplicationDiscoveryService) CreateTagsRequest ¶

func (c *ApplicationDiscoveryService) CreateTagsRequest(input *CreateTagsInput) (req *request.Request, output *CreateTagsOutput)

CreateTagsRequest generates a "aws/request.Request" representing the client's request for the CreateTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateTags for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateTagsRequest method.
req, resp := client.CreateTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateTags

func (*ApplicationDiscoveryService) CreateTagsWithContext ¶

func (c *ApplicationDiscoveryService) CreateTagsWithContext(ctx aws.Context, input *CreateTagsInput, opts ...request.Option) (*CreateTagsOutput, error)

CreateTagsWithContext is the same as CreateTags with the addition of the ability to pass a context and additional request options.

See CreateTags for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DeleteApplications ¶

func (c *ApplicationDiscoveryService) DeleteApplications(input *DeleteApplicationsInput) (*DeleteApplicationsOutput, error)

DeleteApplications API operation for AWS Application Discovery Service.

Deletes a list of applications and their associations with configuration items.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DeleteApplications for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteApplications

func (*ApplicationDiscoveryService) DeleteApplicationsRequest ¶

func (c *ApplicationDiscoveryService) DeleteApplicationsRequest(input *DeleteApplicationsInput) (req *request.Request, output *DeleteApplicationsOutput)

DeleteApplicationsRequest generates a "aws/request.Request" representing the client's request for the DeleteApplications operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteApplications for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteApplications method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteApplicationsRequest method.
req, resp := client.DeleteApplicationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteApplications

func (*ApplicationDiscoveryService) DeleteApplicationsWithContext ¶

func (c *ApplicationDiscoveryService) DeleteApplicationsWithContext(ctx aws.Context, input *DeleteApplicationsInput, opts ...request.Option) (*DeleteApplicationsOutput, error)

DeleteApplicationsWithContext is the same as DeleteApplications with the addition of the ability to pass a context and additional request options.

See DeleteApplications for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DeleteTags ¶

func (c *ApplicationDiscoveryService) DeleteTags(input *DeleteTagsInput) (*DeleteTagsOutput, error)

DeleteTags API operation for AWS Application Discovery Service.

Deletes the association between configuration items and one or more tags. This API accepts a list of multiple configuration items.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DeleteTags for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeResourceNotFoundException "ResourceNotFoundException"
The specified configuration ID was not located. Verify the configuration
ID and try again.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteTags

func (*ApplicationDiscoveryService) DeleteTagsRequest ¶

func (c *ApplicationDiscoveryService) DeleteTagsRequest(input *DeleteTagsInput) (req *request.Request, output *DeleteTagsOutput)

DeleteTagsRequest generates a "aws/request.Request" representing the client's request for the DeleteTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DeleteTags for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DeleteTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DeleteTagsRequest method.
req, resp := client.DeleteTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteTags

func (*ApplicationDiscoveryService) DeleteTagsWithContext ¶

func (c *ApplicationDiscoveryService) DeleteTagsWithContext(ctx aws.Context, input *DeleteTagsInput, opts ...request.Option) (*DeleteTagsOutput, error)

DeleteTagsWithContext is the same as DeleteTags with the addition of the ability to pass a context and additional request options.

See DeleteTags for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DescribeAgents ¶

func (c *ApplicationDiscoveryService) DescribeAgents(input *DescribeAgentsInput) (*DescribeAgentsOutput, error)

DescribeAgents API operation for AWS Application Discovery Service.

Lists agents or the Connector by ID or lists all agents/Connectors associated with your user account if you did not specify an ID.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DescribeAgents for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeAgents

func (*ApplicationDiscoveryService) DescribeAgentsRequest ¶

func (c *ApplicationDiscoveryService) DescribeAgentsRequest(input *DescribeAgentsInput) (req *request.Request, output *DescribeAgentsOutput)

DescribeAgentsRequest generates a "aws/request.Request" representing the client's request for the DescribeAgents operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeAgents for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAgents method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeAgentsRequest method.
req, resp := client.DescribeAgentsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeAgents

func (*ApplicationDiscoveryService) DescribeAgentsWithContext ¶

func (c *ApplicationDiscoveryService) DescribeAgentsWithContext(ctx aws.Context, input *DescribeAgentsInput, opts ...request.Option) (*DescribeAgentsOutput, error)

DescribeAgentsWithContext is the same as DescribeAgents with the addition of the ability to pass a context and additional request options.

See DescribeAgents for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DescribeConfigurations ¶

func (c *ApplicationDiscoveryService) DescribeConfigurations(input *DescribeConfigurationsInput) (*DescribeConfigurationsOutput, error)

DescribeConfigurations API operation for AWS Application Discovery Service.

Retrieves attributes for a list of configuration item IDs. All of the supplied IDs must be for the same asset type (server, application, process, or connection). Output fields are specific to the asset type selected. For example, the output for a server configuration item includes a list of attributes about the server, such as host name, operating system, and number of network cards.

For a complete list of outputs for each asset type, see Using the DescribeConfigurations Action (http://docs.aws.amazon.com/application-discovery/latest/APIReference/discovery-api-queries.html#DescribeConfigurations).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DescribeConfigurations for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeConfigurations

func (*ApplicationDiscoveryService) DescribeConfigurationsRequest ¶

func (c *ApplicationDiscoveryService) DescribeConfigurationsRequest(input *DescribeConfigurationsInput) (req *request.Request, output *DescribeConfigurationsOutput)

DescribeConfigurationsRequest generates a "aws/request.Request" representing the client's request for the DescribeConfigurations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeConfigurations for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeConfigurations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeConfigurationsRequest method.
req, resp := client.DescribeConfigurationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeConfigurations

func (*ApplicationDiscoveryService) DescribeConfigurationsWithContext ¶

func (c *ApplicationDiscoveryService) DescribeConfigurationsWithContext(ctx aws.Context, input *DescribeConfigurationsInput, opts ...request.Option) (*DescribeConfigurationsOutput, error)

DescribeConfigurationsWithContext is the same as DescribeConfigurations with the addition of the ability to pass a context and additional request options.

See DescribeConfigurations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DescribeExportConfigurations ¶

func (c *ApplicationDiscoveryService) DescribeExportConfigurations(input *DescribeExportConfigurationsInput) (*DescribeExportConfigurationsOutput, error)

DescribeExportConfigurations API operation for AWS Application Discovery Service.

Deprecated. Use DescribeExportTasks instead.

Retrieves the status of a given export process. You can retrieve status from a maximum of 100 processes.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DescribeExportConfigurations for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeResourceNotFoundException "ResourceNotFoundException"
The specified configuration ID was not located. Verify the configuration
ID and try again.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportConfigurations

func (*ApplicationDiscoveryService) DescribeExportConfigurationsRequest ¶

func (c *ApplicationDiscoveryService) DescribeExportConfigurationsRequest(input *DescribeExportConfigurationsInput) (req *request.Request, output *DescribeExportConfigurationsOutput)

DescribeExportConfigurationsRequest generates a "aws/request.Request" representing the client's request for the DescribeExportConfigurations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeExportConfigurations for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeExportConfigurations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeExportConfigurationsRequest method.
req, resp := client.DescribeExportConfigurationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportConfigurations

func (*ApplicationDiscoveryService) DescribeExportConfigurationsWithContext ¶

func (c *ApplicationDiscoveryService) DescribeExportConfigurationsWithContext(ctx aws.Context, input *DescribeExportConfigurationsInput, opts ...request.Option) (*DescribeExportConfigurationsOutput, error)

DescribeExportConfigurationsWithContext is the same as DescribeExportConfigurations with the addition of the ability to pass a context and additional request options.

See DescribeExportConfigurations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DescribeExportTasks ¶

func (c *ApplicationDiscoveryService) DescribeExportTasks(input *DescribeExportTasksInput) (*DescribeExportTasksOutput, error)

DescribeExportTasks API operation for AWS Application Discovery Service.

Retrieve status of one or more export tasks. You can retrieve the status of up to 100 export tasks.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DescribeExportTasks for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportTasks

func (*ApplicationDiscoveryService) DescribeExportTasksRequest ¶

func (c *ApplicationDiscoveryService) DescribeExportTasksRequest(input *DescribeExportTasksInput) (req *request.Request, output *DescribeExportTasksOutput)

DescribeExportTasksRequest generates a "aws/request.Request" representing the client's request for the DescribeExportTasks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeExportTasks for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeExportTasks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeExportTasksRequest method.
req, resp := client.DescribeExportTasksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportTasks

func (*ApplicationDiscoveryService) DescribeExportTasksWithContext ¶

func (c *ApplicationDiscoveryService) DescribeExportTasksWithContext(ctx aws.Context, input *DescribeExportTasksInput, opts ...request.Option) (*DescribeExportTasksOutput, error)

DescribeExportTasksWithContext is the same as DescribeExportTasks with the addition of the ability to pass a context and additional request options.

See DescribeExportTasks for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DescribeTags ¶

func (c *ApplicationDiscoveryService) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error)

DescribeTags API operation for AWS Application Discovery Service.

Retrieves a list of configuration items that are tagged with a specific tag. Or retrieves a list of all tags assigned to a specific configuration item.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DescribeTags for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeResourceNotFoundException "ResourceNotFoundException"
The specified configuration ID was not located. Verify the configuration
ID and try again.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeTags

func (*ApplicationDiscoveryService) DescribeTagsRequest ¶

func (c *ApplicationDiscoveryService) DescribeTagsRequest(input *DescribeTagsInput) (req *request.Request, output *DescribeTagsOutput)

DescribeTagsRequest generates a "aws/request.Request" representing the client's request for the DescribeTags operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTags for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTags method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTagsRequest method.
req, resp := client.DescribeTagsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeTags

func (*ApplicationDiscoveryService) DescribeTagsWithContext ¶

func (c *ApplicationDiscoveryService) DescribeTagsWithContext(ctx aws.Context, input *DescribeTagsInput, opts ...request.Option) (*DescribeTagsOutput, error)

DescribeTagsWithContext is the same as DescribeTags with the addition of the ability to pass a context and additional request options.

See DescribeTags for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) DisassociateConfigurationItemsFromApplication ¶

func (c *ApplicationDiscoveryService) DisassociateConfigurationItemsFromApplication(input *DisassociateConfigurationItemsFromApplicationInput) (*DisassociateConfigurationItemsFromApplicationOutput, error)

DisassociateConfigurationItemsFromApplication API operation for AWS Application Discovery Service.

Disassociates one or more configuration items from an application.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation DisassociateConfigurationItemsFromApplication for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DisassociateConfigurationItemsFromApplication

func (*ApplicationDiscoveryService) DisassociateConfigurationItemsFromApplicationRequest ¶

func (c *ApplicationDiscoveryService) DisassociateConfigurationItemsFromApplicationRequest(input *DisassociateConfigurationItemsFromApplicationInput) (req *request.Request, output *DisassociateConfigurationItemsFromApplicationOutput)

DisassociateConfigurationItemsFromApplicationRequest generates a "aws/request.Request" representing the client's request for the DisassociateConfigurationItemsFromApplication operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DisassociateConfigurationItemsFromApplication for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DisassociateConfigurationItemsFromApplication method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DisassociateConfigurationItemsFromApplicationRequest method.
req, resp := client.DisassociateConfigurationItemsFromApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DisassociateConfigurationItemsFromApplication

func (*ApplicationDiscoveryService) DisassociateConfigurationItemsFromApplicationWithContext ¶

func (c *ApplicationDiscoveryService) DisassociateConfigurationItemsFromApplicationWithContext(ctx aws.Context, input *DisassociateConfigurationItemsFromApplicationInput, opts ...request.Option) (*DisassociateConfigurationItemsFromApplicationOutput, error)

DisassociateConfigurationItemsFromApplicationWithContext is the same as DisassociateConfigurationItemsFromApplication with the addition of the ability to pass a context and additional request options.

See DisassociateConfigurationItemsFromApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) ExportConfigurations ¶

func (c *ApplicationDiscoveryService) ExportConfigurations(input *ExportConfigurationsInput) (*ExportConfigurationsOutput, error)

ExportConfigurations API operation for AWS Application Discovery Service.

Deprecated. Use StartExportTask instead.

Exports all discovered configuration data to an Amazon S3 bucket or an application that enables you to view and evaluate the data. Data includes tags and tag associations, processes, connections, servers, and system performance. This API returns an export ID that you can query using the DescribeExportConfigurations API. The system imposes a limit of two configuration exports in six hours.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation ExportConfigurations for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

* ErrCodeOperationNotPermittedException "OperationNotPermittedException"
This operation is not permitted.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ExportConfigurations

func (*ApplicationDiscoveryService) ExportConfigurationsRequest ¶

func (c *ApplicationDiscoveryService) ExportConfigurationsRequest(input *ExportConfigurationsInput) (req *request.Request, output *ExportConfigurationsOutput)

ExportConfigurationsRequest generates a "aws/request.Request" representing the client's request for the ExportConfigurations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ExportConfigurations for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ExportConfigurations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ExportConfigurationsRequest method.
req, resp := client.ExportConfigurationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ExportConfigurations

func (*ApplicationDiscoveryService) ExportConfigurationsWithContext ¶

func (c *ApplicationDiscoveryService) ExportConfigurationsWithContext(ctx aws.Context, input *ExportConfigurationsInput, opts ...request.Option) (*ExportConfigurationsOutput, error)

ExportConfigurationsWithContext is the same as ExportConfigurations with the addition of the ability to pass a context and additional request options.

See ExportConfigurations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) GetDiscoverySummary ¶

func (c *ApplicationDiscoveryService) GetDiscoverySummary(input *GetDiscoverySummaryInput) (*GetDiscoverySummaryOutput, error)

GetDiscoverySummary API operation for AWS Application Discovery Service.

Retrieves a short summary of discovered assets.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation GetDiscoverySummary for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/GetDiscoverySummary

func (*ApplicationDiscoveryService) GetDiscoverySummaryRequest ¶

func (c *ApplicationDiscoveryService) GetDiscoverySummaryRequest(input *GetDiscoverySummaryInput) (req *request.Request, output *GetDiscoverySummaryOutput)

GetDiscoverySummaryRequest generates a "aws/request.Request" representing the client's request for the GetDiscoverySummary operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See GetDiscoverySummary for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the GetDiscoverySummary method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the GetDiscoverySummaryRequest method.
req, resp := client.GetDiscoverySummaryRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/GetDiscoverySummary

func (*ApplicationDiscoveryService) GetDiscoverySummaryWithContext ¶

func (c *ApplicationDiscoveryService) GetDiscoverySummaryWithContext(ctx aws.Context, input *GetDiscoverySummaryInput, opts ...request.Option) (*GetDiscoverySummaryOutput, error)

GetDiscoverySummaryWithContext is the same as GetDiscoverySummary with the addition of the ability to pass a context and additional request options.

See GetDiscoverySummary for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) ListConfigurations ¶

func (c *ApplicationDiscoveryService) ListConfigurations(input *ListConfigurationsInput) (*ListConfigurationsOutput, error)

ListConfigurations API operation for AWS Application Discovery Service.

Retrieves a list of configuration items according to criteria that you specify in a filter. The filter criteria identifies the relationship requirements.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation ListConfigurations for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeResourceNotFoundException "ResourceNotFoundException"
The specified configuration ID was not located. Verify the configuration
ID and try again.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListConfigurations

func (*ApplicationDiscoveryService) ListConfigurationsRequest ¶

func (c *ApplicationDiscoveryService) ListConfigurationsRequest(input *ListConfigurationsInput) (req *request.Request, output *ListConfigurationsOutput)

ListConfigurationsRequest generates a "aws/request.Request" representing the client's request for the ListConfigurations operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListConfigurations for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListConfigurations method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListConfigurationsRequest method.
req, resp := client.ListConfigurationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListConfigurations

func (*ApplicationDiscoveryService) ListConfigurationsWithContext ¶

func (c *ApplicationDiscoveryService) ListConfigurationsWithContext(ctx aws.Context, input *ListConfigurationsInput, opts ...request.Option) (*ListConfigurationsOutput, error)

ListConfigurationsWithContext is the same as ListConfigurations with the addition of the ability to pass a context and additional request options.

See ListConfigurations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) ListServerNeighbors ¶

func (c *ApplicationDiscoveryService) ListServerNeighbors(input *ListServerNeighborsInput) (*ListServerNeighborsOutput, error)

ListServerNeighbors API operation for AWS Application Discovery Service.

Retrieves a list of servers that are one network hop away from a specified server.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation ListServerNeighbors for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListServerNeighbors

func (*ApplicationDiscoveryService) ListServerNeighborsRequest ¶

func (c *ApplicationDiscoveryService) ListServerNeighborsRequest(input *ListServerNeighborsInput) (req *request.Request, output *ListServerNeighborsOutput)

ListServerNeighborsRequest generates a "aws/request.Request" representing the client's request for the ListServerNeighbors operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ListServerNeighbors for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ListServerNeighbors method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ListServerNeighborsRequest method.
req, resp := client.ListServerNeighborsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListServerNeighbors

func (*ApplicationDiscoveryService) ListServerNeighborsWithContext ¶

func (c *ApplicationDiscoveryService) ListServerNeighborsWithContext(ctx aws.Context, input *ListServerNeighborsInput, opts ...request.Option) (*ListServerNeighborsOutput, error)

ListServerNeighborsWithContext is the same as ListServerNeighbors with the addition of the ability to pass a context and additional request options.

See ListServerNeighbors for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) StartDataCollectionByAgentIds ¶

func (c *ApplicationDiscoveryService) StartDataCollectionByAgentIds(input *StartDataCollectionByAgentIdsInput) (*StartDataCollectionByAgentIdsOutput, error)

StartDataCollectionByAgentIds API operation for AWS Application Discovery Service.

Instructs the specified agents or connectors to start collecting data.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation StartDataCollectionByAgentIds for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartDataCollectionByAgentIds

func (*ApplicationDiscoveryService) StartDataCollectionByAgentIdsRequest ¶

func (c *ApplicationDiscoveryService) StartDataCollectionByAgentIdsRequest(input *StartDataCollectionByAgentIdsInput) (req *request.Request, output *StartDataCollectionByAgentIdsOutput)

StartDataCollectionByAgentIdsRequest generates a "aws/request.Request" representing the client's request for the StartDataCollectionByAgentIds operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See StartDataCollectionByAgentIds for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StartDataCollectionByAgentIds method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the StartDataCollectionByAgentIdsRequest method.
req, resp := client.StartDataCollectionByAgentIdsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartDataCollectionByAgentIds

func (*ApplicationDiscoveryService) StartDataCollectionByAgentIdsWithContext ¶

func (c *ApplicationDiscoveryService) StartDataCollectionByAgentIdsWithContext(ctx aws.Context, input *StartDataCollectionByAgentIdsInput, opts ...request.Option) (*StartDataCollectionByAgentIdsOutput, error)

StartDataCollectionByAgentIdsWithContext is the same as StartDataCollectionByAgentIds with the addition of the ability to pass a context and additional request options.

See StartDataCollectionByAgentIds for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) StartExportTask ¶

func (c *ApplicationDiscoveryService) StartExportTask(input *StartExportTaskInput) (*StartExportTaskOutput, error)

StartExportTask API operation for AWS Application Discovery Service.

Export the configuration data about discovered configuration items and relationships to an S3 bucket in a specified format.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation StartExportTask for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

* ErrCodeOperationNotPermittedException "OperationNotPermittedException"
This operation is not permitted.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartExportTask

func (*ApplicationDiscoveryService) StartExportTaskRequest ¶

func (c *ApplicationDiscoveryService) StartExportTaskRequest(input *StartExportTaskInput) (req *request.Request, output *StartExportTaskOutput)

StartExportTaskRequest generates a "aws/request.Request" representing the client's request for the StartExportTask operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See StartExportTask for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StartExportTask method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the StartExportTaskRequest method.
req, resp := client.StartExportTaskRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartExportTask

func (*ApplicationDiscoveryService) StartExportTaskWithContext ¶

func (c *ApplicationDiscoveryService) StartExportTaskWithContext(ctx aws.Context, input *StartExportTaskInput, opts ...request.Option) (*StartExportTaskOutput, error)

StartExportTaskWithContext is the same as StartExportTask with the addition of the ability to pass a context and additional request options.

See StartExportTask for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) StopDataCollectionByAgentIds ¶

func (c *ApplicationDiscoveryService) StopDataCollectionByAgentIds(input *StopDataCollectionByAgentIdsInput) (*StopDataCollectionByAgentIdsOutput, error)

StopDataCollectionByAgentIds API operation for AWS Application Discovery Service.

Instructs the specified agents or connectors to stop collecting data.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation StopDataCollectionByAgentIds for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StopDataCollectionByAgentIds

func (*ApplicationDiscoveryService) StopDataCollectionByAgentIdsRequest ¶

func (c *ApplicationDiscoveryService) StopDataCollectionByAgentIdsRequest(input *StopDataCollectionByAgentIdsInput) (req *request.Request, output *StopDataCollectionByAgentIdsOutput)

StopDataCollectionByAgentIdsRequest generates a "aws/request.Request" representing the client's request for the StopDataCollectionByAgentIds operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See StopDataCollectionByAgentIds for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the StopDataCollectionByAgentIds method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the StopDataCollectionByAgentIdsRequest method.
req, resp := client.StopDataCollectionByAgentIdsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StopDataCollectionByAgentIds

func (*ApplicationDiscoveryService) StopDataCollectionByAgentIdsWithContext ¶

func (c *ApplicationDiscoveryService) StopDataCollectionByAgentIdsWithContext(ctx aws.Context, input *StopDataCollectionByAgentIdsInput, opts ...request.Option) (*StopDataCollectionByAgentIdsOutput, error)

StopDataCollectionByAgentIdsWithContext is the same as StopDataCollectionByAgentIds with the addition of the ability to pass a context and additional request options.

See StopDataCollectionByAgentIds for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*ApplicationDiscoveryService) UpdateApplication ¶

func (c *ApplicationDiscoveryService) UpdateApplication(input *UpdateApplicationInput) (*UpdateApplicationOutput, error)

UpdateApplication API operation for AWS Application Discovery Service.

Updates metadata about an application.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Application Discovery Service's API operation UpdateApplication for usage and error information.

Returned Error Codes:

* ErrCodeAuthorizationErrorException "AuthorizationErrorException"
The AWS user account does not have permission to perform the action. Check
the IAM policy associated with this account.

* ErrCodeInvalidParameterException "InvalidParameterException"
One or more parameters are not valid. Verify the parameters and try again.

* ErrCodeInvalidParameterValueException "InvalidParameterValueException"
The value of one or more parameters are either invalid or out of range. Verify
the parameter values and try again.

* ErrCodeServerInternalErrorException "ServerInternalErrorException"
The server experienced an internal error. Try again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/UpdateApplication

func (*ApplicationDiscoveryService) UpdateApplicationRequest ¶

func (c *ApplicationDiscoveryService) UpdateApplicationRequest(input *UpdateApplicationInput) (req *request.Request, output *UpdateApplicationOutput)

UpdateApplicationRequest generates a "aws/request.Request" representing the client's request for the UpdateApplication operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See UpdateApplication for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the UpdateApplication method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the UpdateApplicationRequest method.
req, resp := client.UpdateApplicationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/UpdateApplication

func (*ApplicationDiscoveryService) UpdateApplicationWithContext ¶

func (c *ApplicationDiscoveryService) UpdateApplicationWithContext(ctx aws.Context, input *UpdateApplicationInput, opts ...request.Option) (*UpdateApplicationOutput, error)

UpdateApplicationWithContext is the same as UpdateApplication with the addition of the ability to pass a context and additional request options.

See UpdateApplication for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type AssociateConfigurationItemsToApplicationInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/AssociateConfigurationItemsToApplicationRequest

type AssociateConfigurationItemsToApplicationInput struct {

    // The configuration ID of an application with which items are to be associated.
    //
    // ApplicationConfigurationId is a required field
    ApplicationConfigurationId *string `locationName:"applicationConfigurationId" type:"string" required:"true"`

    // The ID of each configuration item to be associated with an application.
    //
    // ConfigurationIds is a required field
    ConfigurationIds []*string `locationName:"configurationIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (AssociateConfigurationItemsToApplicationInput) GoString ¶

func (s AssociateConfigurationItemsToApplicationInput) GoString() string

GoString returns the string representation

func (*AssociateConfigurationItemsToApplicationInput) SetApplicationConfigurationId ¶

func (s *AssociateConfigurationItemsToApplicationInput) SetApplicationConfigurationId(v string) *AssociateConfigurationItemsToApplicationInput

SetApplicationConfigurationId sets the ApplicationConfigurationId field's value.

func (*AssociateConfigurationItemsToApplicationInput) SetConfigurationIds ¶

func (s *AssociateConfigurationItemsToApplicationInput) SetConfigurationIds(v []*string) *AssociateConfigurationItemsToApplicationInput

SetConfigurationIds sets the ConfigurationIds field's value.

func (AssociateConfigurationItemsToApplicationInput) String ¶

func (s AssociateConfigurationItemsToApplicationInput) String() string

String returns the string representation

func (*AssociateConfigurationItemsToApplicationInput) Validate ¶

func (s *AssociateConfigurationItemsToApplicationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateConfigurationItemsToApplicationOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/AssociateConfigurationItemsToApplicationResponse

type AssociateConfigurationItemsToApplicationOutput struct {
    // contains filtered or unexported fields
}

func (AssociateConfigurationItemsToApplicationOutput) GoString ¶

func (s AssociateConfigurationItemsToApplicationOutput) GoString() string

GoString returns the string representation

func (AssociateConfigurationItemsToApplicationOutput) String ¶

func (s AssociateConfigurationItemsToApplicationOutput) String() string

String returns the string representation

type ConfigurationTag ¶

Tags for a configuration item. Tags are metadata that help you categorize IT assets. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ConfigurationTag

type ConfigurationTag struct {

    // The configuration ID for the item to tag. You can specify a list of keys
    // and values.
    ConfigurationId *string `locationName:"configurationId" type:"string"`

    // A type of IT asset to tag.
    ConfigurationType *string `locationName:"configurationType" type:"string" enum:"ConfigurationItemType"`

    // A type of tag on which to filter. For example, serverType.
    Key *string `locationName:"key" type:"string"`

    // The time the configuration tag was created in Coordinated Universal Time
    // (UTC).
    TimeOfCreation *time.Time `locationName:"timeOfCreation" type:"timestamp" timestampFormat:"unix"`

    // A value on which to filter. For example key = serverType and value = web
    // server.
    Value *string `locationName:"value" type:"string"`
    // contains filtered or unexported fields
}

func (ConfigurationTag) GoString ¶

func (s ConfigurationTag) GoString() string

GoString returns the string representation

func (*ConfigurationTag) SetConfigurationId ¶

func (s *ConfigurationTag) SetConfigurationId(v string) *ConfigurationTag

SetConfigurationId sets the ConfigurationId field's value.

func (*ConfigurationTag) SetConfigurationType ¶

func (s *ConfigurationTag) SetConfigurationType(v string) *ConfigurationTag

SetConfigurationType sets the ConfigurationType field's value.

func (*ConfigurationTag) SetKey ¶

func (s *ConfigurationTag) SetKey(v string) *ConfigurationTag

SetKey sets the Key field's value.

func (*ConfigurationTag) SetTimeOfCreation ¶

func (s *ConfigurationTag) SetTimeOfCreation(v time.Time) *ConfigurationTag

SetTimeOfCreation sets the TimeOfCreation field's value.

func (*ConfigurationTag) SetValue ¶

func (s *ConfigurationTag) SetValue(v string) *ConfigurationTag

SetValue sets the Value field's value.

func (ConfigurationTag) String ¶

func (s ConfigurationTag) String() string

String returns the string representation

type CreateApplicationInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateApplicationRequest

type CreateApplicationInput struct {

    // Description of the application to be created.
    Description *string `locationName:"description" type:"string"`

    // Name of the application to be created.
    //
    // Name is a required field
    Name *string `locationName:"name" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CreateApplicationInput) GoString ¶

func (s CreateApplicationInput) GoString() string

GoString returns the string representation

func (*CreateApplicationInput) SetDescription ¶

func (s *CreateApplicationInput) SetDescription(v string) *CreateApplicationInput

SetDescription sets the Description field's value.

func (*CreateApplicationInput) SetName ¶

func (s *CreateApplicationInput) SetName(v string) *CreateApplicationInput

SetName sets the Name field's value.

func (CreateApplicationInput) String ¶

func (s CreateApplicationInput) String() string

String returns the string representation

func (*CreateApplicationInput) Validate ¶

func (s *CreateApplicationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateApplicationOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateApplicationResponse

type CreateApplicationOutput struct {

    // Configuration ID of an application to be created.
    ConfigurationId *string `locationName:"configurationId" type:"string"`
    // contains filtered or unexported fields
}

func (CreateApplicationOutput) GoString ¶

func (s CreateApplicationOutput) GoString() string

GoString returns the string representation

func (*CreateApplicationOutput) SetConfigurationId ¶

func (s *CreateApplicationOutput) SetConfigurationId(v string) *CreateApplicationOutput

SetConfigurationId sets the ConfigurationId field's value.

func (CreateApplicationOutput) String ¶

func (s CreateApplicationOutput) String() string

String returns the string representation

type CreateTagsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateTagsRequest

type CreateTagsInput struct {

    // A list of configuration items that you want to tag.
    //
    // ConfigurationIds is a required field
    ConfigurationIds []*string `locationName:"configurationIds" type:"list" required:"true"`

    // Tags that you want to associate with one or more configuration items. Specify
    // the tags that you want to create in a key-value format. For example:
    //
    // {"key": "serverType", "value": "webServer"}
    //
    // Tags is a required field
    Tags []*Tag `locationName:"tags" locationNameList:"item" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (CreateTagsInput) GoString ¶

func (s CreateTagsInput) GoString() string

GoString returns the string representation

func (*CreateTagsInput) SetConfigurationIds ¶

func (s *CreateTagsInput) SetConfigurationIds(v []*string) *CreateTagsInput

SetConfigurationIds sets the ConfigurationIds field's value.

func (*CreateTagsInput) SetTags ¶

func (s *CreateTagsInput) SetTags(v []*Tag) *CreateTagsInput

SetTags sets the Tags field's value.

func (CreateTagsInput) String ¶

func (s CreateTagsInput) String() string

String returns the string representation

func (*CreateTagsInput) Validate ¶

func (s *CreateTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTagsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CreateTagsResponse

type CreateTagsOutput struct {
    // contains filtered or unexported fields
}

func (CreateTagsOutput) GoString ¶

func (s CreateTagsOutput) GoString() string

GoString returns the string representation

func (CreateTagsOutput) String ¶

func (s CreateTagsOutput) String() string

String returns the string representation

type CustomerAgentInfo ¶

Inventory data for installed discovery agents. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CustomerAgentInfo

type CustomerAgentInfo struct {

    // Number of active discovery agents.
    //
    // ActiveAgents is a required field
    ActiveAgents *int64 `locationName:"activeAgents" type:"integer" required:"true"`

    // Number of blacklisted discovery agents.
    //
    // BlackListedAgents is a required field
    BlackListedAgents *int64 `locationName:"blackListedAgents" type:"integer" required:"true"`

    // Number of healthy discovery agents
    //
    // HealthyAgents is a required field
    HealthyAgents *int64 `locationName:"healthyAgents" type:"integer" required:"true"`

    // Number of discovery agents with status SHUTDOWN.
    //
    // ShutdownAgents is a required field
    ShutdownAgents *int64 `locationName:"shutdownAgents" type:"integer" required:"true"`

    // Total number of discovery agents.
    //
    // TotalAgents is a required field
    TotalAgents *int64 `locationName:"totalAgents" type:"integer" required:"true"`

    // Number of unhealthy discovery agents.
    //
    // UnhealthyAgents is a required field
    UnhealthyAgents *int64 `locationName:"unhealthyAgents" type:"integer" required:"true"`

    // Number of unknown discovery agents.
    //
    // UnknownAgents is a required field
    UnknownAgents *int64 `locationName:"unknownAgents" type:"integer" required:"true"`
    // contains filtered or unexported fields
}

func (CustomerAgentInfo) GoString ¶

func (s CustomerAgentInfo) GoString() string

GoString returns the string representation

func (*CustomerAgentInfo) SetActiveAgents ¶

func (s *CustomerAgentInfo) SetActiveAgents(v int64) *CustomerAgentInfo

SetActiveAgents sets the ActiveAgents field's value.

func (*CustomerAgentInfo) SetBlackListedAgents ¶

func (s *CustomerAgentInfo) SetBlackListedAgents(v int64) *CustomerAgentInfo

SetBlackListedAgents sets the BlackListedAgents field's value.

func (*CustomerAgentInfo) SetHealthyAgents ¶

func (s *CustomerAgentInfo) SetHealthyAgents(v int64) *CustomerAgentInfo

SetHealthyAgents sets the HealthyAgents field's value.

func (*CustomerAgentInfo) SetShutdownAgents ¶

func (s *CustomerAgentInfo) SetShutdownAgents(v int64) *CustomerAgentInfo

SetShutdownAgents sets the ShutdownAgents field's value.

func (*CustomerAgentInfo) SetTotalAgents ¶

func (s *CustomerAgentInfo) SetTotalAgents(v int64) *CustomerAgentInfo

SetTotalAgents sets the TotalAgents field's value.

func (*CustomerAgentInfo) SetUnhealthyAgents ¶

func (s *CustomerAgentInfo) SetUnhealthyAgents(v int64) *CustomerAgentInfo

SetUnhealthyAgents sets the UnhealthyAgents field's value.

func (*CustomerAgentInfo) SetUnknownAgents ¶

func (s *CustomerAgentInfo) SetUnknownAgents(v int64) *CustomerAgentInfo

SetUnknownAgents sets the UnknownAgents field's value.

func (CustomerAgentInfo) String ¶

func (s CustomerAgentInfo) String() string

String returns the string representation

type CustomerConnectorInfo ¶

Inventory data for installed discovery connectors. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/CustomerConnectorInfo

type CustomerConnectorInfo struct {

    // Number of active discovery connectors.
    //
    // ActiveConnectors is a required field
    ActiveConnectors *int64 `locationName:"activeConnectors" type:"integer" required:"true"`

    // Number of blacklisted discovery connectors.
    //
    // BlackListedConnectors is a required field
    BlackListedConnectors *int64 `locationName:"blackListedConnectors" type:"integer" required:"true"`

    // Number of healthy discovery connectors.
    //
    // HealthyConnectors is a required field
    HealthyConnectors *int64 `locationName:"healthyConnectors" type:"integer" required:"true"`

    // Number of discovery connectors with status SHUTDOWN,
    //
    // ShutdownConnectors is a required field
    ShutdownConnectors *int64 `locationName:"shutdownConnectors" type:"integer" required:"true"`

    // Total number of discovery connectors.
    //
    // TotalConnectors is a required field
    TotalConnectors *int64 `locationName:"totalConnectors" type:"integer" required:"true"`

    // Number of unhealthy discovery connectors.
    //
    // UnhealthyConnectors is a required field
    UnhealthyConnectors *int64 `locationName:"unhealthyConnectors" type:"integer" required:"true"`

    // Number of unknown discovery connectors.
    //
    // UnknownConnectors is a required field
    UnknownConnectors *int64 `locationName:"unknownConnectors" type:"integer" required:"true"`
    // contains filtered or unexported fields
}

func (CustomerConnectorInfo) GoString ¶

func (s CustomerConnectorInfo) GoString() string

GoString returns the string representation

func (*CustomerConnectorInfo) SetActiveConnectors ¶

func (s *CustomerConnectorInfo) SetActiveConnectors(v int64) *CustomerConnectorInfo

SetActiveConnectors sets the ActiveConnectors field's value.

func (*CustomerConnectorInfo) SetBlackListedConnectors ¶

func (s *CustomerConnectorInfo) SetBlackListedConnectors(v int64) *CustomerConnectorInfo

SetBlackListedConnectors sets the BlackListedConnectors field's value.

func (*CustomerConnectorInfo) SetHealthyConnectors ¶

func (s *CustomerConnectorInfo) SetHealthyConnectors(v int64) *CustomerConnectorInfo

SetHealthyConnectors sets the HealthyConnectors field's value.

func (*CustomerConnectorInfo) SetShutdownConnectors ¶

func (s *CustomerConnectorInfo) SetShutdownConnectors(v int64) *CustomerConnectorInfo

SetShutdownConnectors sets the ShutdownConnectors field's value.

func (*CustomerConnectorInfo) SetTotalConnectors ¶

func (s *CustomerConnectorInfo) SetTotalConnectors(v int64) *CustomerConnectorInfo

SetTotalConnectors sets the TotalConnectors field's value.

func (*CustomerConnectorInfo) SetUnhealthyConnectors ¶

func (s *CustomerConnectorInfo) SetUnhealthyConnectors(v int64) *CustomerConnectorInfo

SetUnhealthyConnectors sets the UnhealthyConnectors field's value.

func (*CustomerConnectorInfo) SetUnknownConnectors ¶

func (s *CustomerConnectorInfo) SetUnknownConnectors(v int64) *CustomerConnectorInfo

SetUnknownConnectors sets the UnknownConnectors field's value.

func (CustomerConnectorInfo) String ¶

func (s CustomerConnectorInfo) String() string

String returns the string representation

type DeleteApplicationsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteApplicationsRequest

type DeleteApplicationsInput struct {

    // Configuration ID of an application to be deleted.
    //
    // ConfigurationIds is a required field
    ConfigurationIds []*string `locationName:"configurationIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteApplicationsInput) GoString ¶

func (s DeleteApplicationsInput) GoString() string

GoString returns the string representation

func (*DeleteApplicationsInput) SetConfigurationIds ¶

func (s *DeleteApplicationsInput) SetConfigurationIds(v []*string) *DeleteApplicationsInput

SetConfigurationIds sets the ConfigurationIds field's value.

func (DeleteApplicationsInput) String ¶

func (s DeleteApplicationsInput) String() string

String returns the string representation

func (*DeleteApplicationsInput) Validate ¶

func (s *DeleteApplicationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteApplicationsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteApplicationsResponse

type DeleteApplicationsOutput struct {
    // contains filtered or unexported fields
}

func (DeleteApplicationsOutput) GoString ¶

func (s DeleteApplicationsOutput) GoString() string

GoString returns the string representation

func (DeleteApplicationsOutput) String ¶

func (s DeleteApplicationsOutput) String() string

String returns the string representation

type DeleteTagsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteTagsRequest

type DeleteTagsInput struct {

    // A list of configuration items with tags that you want to delete.
    //
    // ConfigurationIds is a required field
    ConfigurationIds []*string `locationName:"configurationIds" type:"list" required:"true"`

    // Tags that you want to delete from one or more configuration items. Specify
    // the tags that you want to delete in a key-value format. For example:
    //
    // {"key": "serverType", "value": "webServer"}
    Tags []*Tag `locationName:"tags" locationNameList:"item" type:"list"`
    // contains filtered or unexported fields
}

func (DeleteTagsInput) GoString ¶

func (s DeleteTagsInput) GoString() string

GoString returns the string representation

func (*DeleteTagsInput) SetConfigurationIds ¶

func (s *DeleteTagsInput) SetConfigurationIds(v []*string) *DeleteTagsInput

SetConfigurationIds sets the ConfigurationIds field's value.

func (*DeleteTagsInput) SetTags ¶

func (s *DeleteTagsInput) SetTags(v []*Tag) *DeleteTagsInput

SetTags sets the Tags field's value.

func (DeleteTagsInput) String ¶

func (s DeleteTagsInput) String() string

String returns the string representation

func (*DeleteTagsInput) Validate ¶

func (s *DeleteTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTagsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DeleteTagsResponse

type DeleteTagsOutput struct {
    // contains filtered or unexported fields
}

func (DeleteTagsOutput) GoString ¶

func (s DeleteTagsOutput) GoString() string

GoString returns the string representation

func (DeleteTagsOutput) String ¶

func (s DeleteTagsOutput) String() string

String returns the string representation

type DescribeAgentsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeAgentsRequest

type DescribeAgentsInput struct {

    // The agent or the Connector IDs for which you want information. If you specify
    // no IDs, the system returns information about all agents/Connectors associated
    // with your AWS user account.
    AgentIds []*string `locationName:"agentIds" type:"list"`

    // You can filter the request using various logical operators and a key-value
    // format. For example:
    //
    // {"key": "collectionStatus", "value": "STARTED"}
    Filters []*Filter `locationName:"filters" type:"list"`

    // The total number of agents/Connectors to return in a single page of output.
    // The maximum value is 100.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // Token to retrieve the next set of results. For example, if you previously
    // specified 100 IDs for DescribeAgentsRequest$agentIds but set DescribeAgentsRequest$maxResults
    // to 10, you received a set of 10 results along with a token. Use that token
    // in this query to get the next set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeAgentsInput) GoString ¶

func (s DescribeAgentsInput) GoString() string

GoString returns the string representation

func (*DescribeAgentsInput) SetAgentIds ¶

func (s *DescribeAgentsInput) SetAgentIds(v []*string) *DescribeAgentsInput

SetAgentIds sets the AgentIds field's value.

func (*DescribeAgentsInput) SetFilters ¶

func (s *DescribeAgentsInput) SetFilters(v []*Filter) *DescribeAgentsInput

SetFilters sets the Filters field's value.

func (*DescribeAgentsInput) SetMaxResults ¶

func (s *DescribeAgentsInput) SetMaxResults(v int64) *DescribeAgentsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeAgentsInput) SetNextToken ¶

func (s *DescribeAgentsInput) SetNextToken(v string) *DescribeAgentsInput

SetNextToken sets the NextToken field's value.

func (DescribeAgentsInput) String ¶

func (s DescribeAgentsInput) String() string

String returns the string representation

func (*DescribeAgentsInput) Validate ¶

func (s *DescribeAgentsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeAgentsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeAgentsResponse

type DescribeAgentsOutput struct {

    // Lists agents or the Connector by ID or lists all agents/Connectors associated
    // with your user account if you did not specify an agent/Connector ID. The
    // output includes agent/Connector IDs, IP addresses, media access control (MAC)
    // addresses, agent/Connector health, host name where the agent/Connector resides,
    // and the version number of each agent/Connector.
    AgentsInfo []*AgentInfo `locationName:"agentsInfo" type:"list"`

    // Token to retrieve the next set of results. For example, if you specified
    // 100 IDs for DescribeAgentsRequest$agentIds but set DescribeAgentsRequest$maxResults
    // to 10, you received a set of 10 results along with this token. Use this token
    // in the next query to retrieve the next set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeAgentsOutput) GoString ¶

func (s DescribeAgentsOutput) GoString() string

GoString returns the string representation

func (*DescribeAgentsOutput) SetAgentsInfo ¶

func (s *DescribeAgentsOutput) SetAgentsInfo(v []*AgentInfo) *DescribeAgentsOutput

SetAgentsInfo sets the AgentsInfo field's value.

func (*DescribeAgentsOutput) SetNextToken ¶

func (s *DescribeAgentsOutput) SetNextToken(v string) *DescribeAgentsOutput

SetNextToken sets the NextToken field's value.

func (DescribeAgentsOutput) String ¶

func (s DescribeAgentsOutput) String() string

String returns the string representation

type DescribeConfigurationsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeConfigurationsRequest

type DescribeConfigurationsInput struct {

    // One or more configuration IDs.
    //
    // ConfigurationIds is a required field
    ConfigurationIds []*string `locationName:"configurationIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeConfigurationsInput) GoString ¶

func (s DescribeConfigurationsInput) GoString() string

GoString returns the string representation

func (*DescribeConfigurationsInput) SetConfigurationIds ¶

func (s *DescribeConfigurationsInput) SetConfigurationIds(v []*string) *DescribeConfigurationsInput

SetConfigurationIds sets the ConfigurationIds field's value.

func (DescribeConfigurationsInput) String ¶

func (s DescribeConfigurationsInput) String() string

String returns the string representation

func (*DescribeConfigurationsInput) Validate ¶

func (s *DescribeConfigurationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeConfigurationsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeConfigurationsResponse

type DescribeConfigurationsOutput struct {

    // A key in the response map. The value is an array of data.
    Configurations []map[string]*string `locationName:"configurations" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeConfigurationsOutput) GoString ¶

func (s DescribeConfigurationsOutput) GoString() string

GoString returns the string representation

func (*DescribeConfigurationsOutput) SetConfigurations ¶

func (s *DescribeConfigurationsOutput) SetConfigurations(v []map[string]*string) *DescribeConfigurationsOutput

SetConfigurations sets the Configurations field's value.

func (DescribeConfigurationsOutput) String ¶

func (s DescribeConfigurationsOutput) String() string

String returns the string representation

type DescribeExportConfigurationsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportConfigurationsRequest

type DescribeExportConfigurationsInput struct {

    // A unique identifier that you can use to query the export status.
    ExportIds []*string `locationName:"exportIds" type:"list"`

    // The maximum number of results that you want to display as a part of the query.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // A token to get the next set of results. For example, if you specify 100 IDs
    // for DescribeExportConfigurationsRequest$exportIds but set DescribeExportConfigurationsRequest$maxResults
    // to 10, you get results in a set of 10. Use the token in the query to get
    // the next set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeExportConfigurationsInput) GoString ¶

func (s DescribeExportConfigurationsInput) GoString() string

GoString returns the string representation

func (*DescribeExportConfigurationsInput) SetExportIds ¶

func (s *DescribeExportConfigurationsInput) SetExportIds(v []*string) *DescribeExportConfigurationsInput

SetExportIds sets the ExportIds field's value.

func (*DescribeExportConfigurationsInput) SetMaxResults ¶

func (s *DescribeExportConfigurationsInput) SetMaxResults(v int64) *DescribeExportConfigurationsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeExportConfigurationsInput) SetNextToken ¶

func (s *DescribeExportConfigurationsInput) SetNextToken(v string) *DescribeExportConfigurationsInput

SetNextToken sets the NextToken field's value.

func (DescribeExportConfigurationsInput) String ¶

func (s DescribeExportConfigurationsInput) String() string

String returns the string representation

type DescribeExportConfigurationsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportConfigurationsResponse

type DescribeExportConfigurationsOutput struct {

    // Returns export details. When the status is complete, the response includes
    // a URL for an Amazon S3 bucket where you can view the data in a CSV file.
    ExportsInfo []*ExportInfo `locationName:"exportsInfo" type:"list"`

    // A token to get the next set of results. For example, if you specify 100 IDs
    // for DescribeExportConfigurationsRequest$exportIds but set DescribeExportConfigurationsRequest$maxResults
    // to 10, you get results in a set of 10. Use the token in the query to get
    // the next set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeExportConfigurationsOutput) GoString ¶

func (s DescribeExportConfigurationsOutput) GoString() string

GoString returns the string representation

func (*DescribeExportConfigurationsOutput) SetExportsInfo ¶

func (s *DescribeExportConfigurationsOutput) SetExportsInfo(v []*ExportInfo) *DescribeExportConfigurationsOutput

SetExportsInfo sets the ExportsInfo field's value.

func (*DescribeExportConfigurationsOutput) SetNextToken ¶

func (s *DescribeExportConfigurationsOutput) SetNextToken(v string) *DescribeExportConfigurationsOutput

SetNextToken sets the NextToken field's value.

func (DescribeExportConfigurationsOutput) String ¶

func (s DescribeExportConfigurationsOutput) String() string

String returns the string representation

type DescribeExportTasksInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportTasksRequest

type DescribeExportTasksInput struct {

    // One or more unique identifiers used to query the status of an export request.
    ExportIds []*string `locationName:"exportIds" type:"list"`

    // The maximum number of volume results returned by DescribeExportTasks in paginated
    // output. When this parameter is used, DescribeExportTasks only returns maxResults
    // results in a single page along with a nextToken response element.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // The nextToken value returned from a previous paginated DescribeExportTasks
    // request where maxResults was used and the results exceeded the value of that
    // parameter. Pagination continues from the end of the previous results that
    // returned the nextToken value. This value is null when there are no more results
    // to return.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeExportTasksInput) GoString ¶

func (s DescribeExportTasksInput) GoString() string

GoString returns the string representation

func (*DescribeExportTasksInput) SetExportIds ¶

func (s *DescribeExportTasksInput) SetExportIds(v []*string) *DescribeExportTasksInput

SetExportIds sets the ExportIds field's value.

func (*DescribeExportTasksInput) SetMaxResults ¶

func (s *DescribeExportTasksInput) SetMaxResults(v int64) *DescribeExportTasksInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeExportTasksInput) SetNextToken ¶

func (s *DescribeExportTasksInput) SetNextToken(v string) *DescribeExportTasksInput

SetNextToken sets the NextToken field's value.

func (DescribeExportTasksInput) String ¶

func (s DescribeExportTasksInput) String() string

String returns the string representation

type DescribeExportTasksOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeExportTasksResponse

type DescribeExportTasksOutput struct {

    // Contains one or more sets of export request details. When the status of a
    // request is SUCCEEDED, the response includes a URL for an Amazon S3 bucket
    // where you can view the data in a CSV file.
    ExportsInfo []*ExportInfo `locationName:"exportsInfo" type:"list"`

    // The nextToken value to include in a future DescribeExportTasks request. When
    // the results of a DescribeExportTasks request exceed maxResults, this value
    // can be used to retrieve the next page of results. This value is null when
    // there are no more results to return.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeExportTasksOutput) GoString ¶

func (s DescribeExportTasksOutput) GoString() string

GoString returns the string representation

func (*DescribeExportTasksOutput) SetExportsInfo ¶

func (s *DescribeExportTasksOutput) SetExportsInfo(v []*ExportInfo) *DescribeExportTasksOutput

SetExportsInfo sets the ExportsInfo field's value.

func (*DescribeExportTasksOutput) SetNextToken ¶

func (s *DescribeExportTasksOutput) SetNextToken(v string) *DescribeExportTasksOutput

SetNextToken sets the NextToken field's value.

func (DescribeExportTasksOutput) String ¶

func (s DescribeExportTasksOutput) String() string

String returns the string representation

type DescribeTagsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeTagsRequest

type DescribeTagsInput struct {

    // You can filter the list using a key-value format. You can separate these
    // items by using logical operators. Allowed filters include tagKey, tagValue,
    // and configurationId.
    Filters []*TagFilter `locationName:"filters" type:"list"`

    // The total number of items to return in a single page of output. The maximum
    // value is 100.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // A token to start the list. Use this token to get the next set of results.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (DescribeTagsInput) GoString ¶

func (s DescribeTagsInput) GoString() string

GoString returns the string representation

func (*DescribeTagsInput) SetFilters ¶

func (s *DescribeTagsInput) SetFilters(v []*TagFilter) *DescribeTagsInput

SetFilters sets the Filters field's value.

func (*DescribeTagsInput) SetMaxResults ¶

func (s *DescribeTagsInput) SetMaxResults(v int64) *DescribeTagsInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeTagsInput) SetNextToken ¶

func (s *DescribeTagsInput) SetNextToken(v string) *DescribeTagsInput

SetNextToken sets the NextToken field's value.

func (DescribeTagsInput) String ¶

func (s DescribeTagsInput) String() string

String returns the string representation

func (*DescribeTagsInput) Validate ¶

func (s *DescribeTagsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeTagsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DescribeTagsResponse

type DescribeTagsOutput struct {

    // The call returns a token. Use this token to get the next set of results.
    NextToken *string `locationName:"nextToken" type:"string"`

    // Depending on the input, this is a list of configuration items tagged with
    // a specific tag, or a list of tags for a specific configuration item.
    Tags []*ConfigurationTag `locationName:"tags" locationNameList:"item" type:"list"`
    // contains filtered or unexported fields
}

func (DescribeTagsOutput) GoString ¶

func (s DescribeTagsOutput) GoString() string

GoString returns the string representation

func (*DescribeTagsOutput) SetNextToken ¶

func (s *DescribeTagsOutput) SetNextToken(v string) *DescribeTagsOutput

SetNextToken sets the NextToken field's value.

func (*DescribeTagsOutput) SetTags ¶

func (s *DescribeTagsOutput) SetTags(v []*ConfigurationTag) *DescribeTagsOutput

SetTags sets the Tags field's value.

func (DescribeTagsOutput) String ¶

func (s DescribeTagsOutput) String() string

String returns the string representation

type DisassociateConfigurationItemsFromApplicationInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DisassociateConfigurationItemsFromApplicationRequest

type DisassociateConfigurationItemsFromApplicationInput struct {

    // Configuration ID of an application from which each item is disassociated.
    //
    // ApplicationConfigurationId is a required field
    ApplicationConfigurationId *string `locationName:"applicationConfigurationId" type:"string" required:"true"`

    // Configuration ID of each item to be disassociated from an application.
    //
    // ConfigurationIds is a required field
    ConfigurationIds []*string `locationName:"configurationIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (DisassociateConfigurationItemsFromApplicationInput) GoString ¶

func (s DisassociateConfigurationItemsFromApplicationInput) GoString() string

GoString returns the string representation

func (*DisassociateConfigurationItemsFromApplicationInput) SetApplicationConfigurationId ¶

func (s *DisassociateConfigurationItemsFromApplicationInput) SetApplicationConfigurationId(v string) *DisassociateConfigurationItemsFromApplicationInput

SetApplicationConfigurationId sets the ApplicationConfigurationId field's value.

func (*DisassociateConfigurationItemsFromApplicationInput) SetConfigurationIds ¶

func (s *DisassociateConfigurationItemsFromApplicationInput) SetConfigurationIds(v []*string) *DisassociateConfigurationItemsFromApplicationInput

SetConfigurationIds sets the ConfigurationIds field's value.

func (DisassociateConfigurationItemsFromApplicationInput) String ¶

func (s DisassociateConfigurationItemsFromApplicationInput) String() string

String returns the string representation

func (*DisassociateConfigurationItemsFromApplicationInput) Validate ¶

func (s *DisassociateConfigurationItemsFromApplicationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisassociateConfigurationItemsFromApplicationOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/DisassociateConfigurationItemsFromApplicationResponse

type DisassociateConfigurationItemsFromApplicationOutput struct {
    // contains filtered or unexported fields
}

func (DisassociateConfigurationItemsFromApplicationOutput) GoString ¶

func (s DisassociateConfigurationItemsFromApplicationOutput) GoString() string

GoString returns the string representation

func (DisassociateConfigurationItemsFromApplicationOutput) String ¶

func (s DisassociateConfigurationItemsFromApplicationOutput) String() string

String returns the string representation

type ExportConfigurationsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ExportConfigurationsInput

type ExportConfigurationsInput struct {
    // contains filtered or unexported fields
}

func (ExportConfigurationsInput) GoString ¶

func (s ExportConfigurationsInput) GoString() string

GoString returns the string representation

func (ExportConfigurationsInput) String ¶

func (s ExportConfigurationsInput) String() string

String returns the string representation

type ExportConfigurationsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ExportConfigurationsResponse

type ExportConfigurationsOutput struct {

    // A unique identifier that you can use to query the export status.
    ExportId *string `locationName:"exportId" type:"string"`
    // contains filtered or unexported fields
}

func (ExportConfigurationsOutput) GoString ¶

func (s ExportConfigurationsOutput) GoString() string

GoString returns the string representation

func (*ExportConfigurationsOutput) SetExportId ¶

func (s *ExportConfigurationsOutput) SetExportId(v string) *ExportConfigurationsOutput

SetExportId sets the ExportId field's value.

func (ExportConfigurationsOutput) String ¶

func (s ExportConfigurationsOutput) String() string

String returns the string representation

type ExportInfo ¶

Information regarding the export status of the discovered data. The value is an array of objects. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ExportInfo

type ExportInfo struct {

    // A URL for an Amazon S3 bucket where you can review the configuration data.
    // The URL is displayed only if the export succeeded.
    ConfigurationsDownloadUrl *string `locationName:"configurationsDownloadUrl" type:"string"`

    // A unique identifier that you can use to query the export.
    //
    // ExportId is a required field
    ExportId *string `locationName:"exportId" type:"string" required:"true"`

    // The time that the configuration data export was initiated.
    //
    // ExportRequestTime is a required field
    ExportRequestTime *time.Time `locationName:"exportRequestTime" type:"timestamp" timestampFormat:"unix" required:"true"`

    // The status of the configuration data export. The status can succeed, fail,
    // or be in-progress.
    //
    // ExportStatus is a required field
    ExportStatus *string `locationName:"exportStatus" type:"string" required:"true" enum:"ExportStatus"`

    // Helpful status messages for API callers. For example: Too many exports in
    // the last 6 hours. Export in progress. Export was successful.
    //
    // StatusMessage is a required field
    StatusMessage *string `locationName:"statusMessage" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ExportInfo) GoString ¶

func (s ExportInfo) GoString() string

GoString returns the string representation

func (*ExportInfo) SetConfigurationsDownloadUrl ¶

func (s *ExportInfo) SetConfigurationsDownloadUrl(v string) *ExportInfo

SetConfigurationsDownloadUrl sets the ConfigurationsDownloadUrl field's value.

func (*ExportInfo) SetExportId ¶

func (s *ExportInfo) SetExportId(v string) *ExportInfo

SetExportId sets the ExportId field's value.

func (*ExportInfo) SetExportRequestTime ¶

func (s *ExportInfo) SetExportRequestTime(v time.Time) *ExportInfo

SetExportRequestTime sets the ExportRequestTime field's value.

func (*ExportInfo) SetExportStatus ¶

func (s *ExportInfo) SetExportStatus(v string) *ExportInfo

SetExportStatus sets the ExportStatus field's value.

func (*ExportInfo) SetStatusMessage ¶

func (s *ExportInfo) SetStatusMessage(v string) *ExportInfo

SetStatusMessage sets the StatusMessage field's value.

func (ExportInfo) String ¶

func (s ExportInfo) String() string

String returns the string representation

type Filter ¶

A filter that can use conditional operators.

For more information about filters, see Querying Discovered Configuration Items (http://docs.aws.amazon.com/application-discovery/latest/APIReference/discovery-api-queries.html). Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/Filter

type Filter struct {

    // A conditional operator. The following operators are valid: EQUALS, NOT_EQUALS,
    // CONTAINS, NOT_CONTAINS. If you specify multiple filters, the system utilizes
    // all filters as though concatenated by AND. If you specify multiple values
    // for a particular filter, the system differentiates the values using OR. Calling
    // either DescribeConfigurations or ListConfigurations returns attributes of
    // matching configuration items.
    //
    // Condition is a required field
    Condition *string `locationName:"condition" type:"string" required:"true"`

    // The name of the filter.
    //
    // Name is a required field
    Name *string `locationName:"name" type:"string" required:"true"`

    // A string value on which to filter. For example, if you choose the destinationServer.osVersion
    // filter name, you could specify Ubuntu for the value.
    //
    // Values is a required field
    Values []*string `locationName:"values" locationNameList:"item" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (Filter) GoString ¶

func (s Filter) GoString() string

GoString returns the string representation

func (*Filter) SetCondition ¶

func (s *Filter) SetCondition(v string) *Filter

SetCondition sets the Condition field's value.

func (*Filter) SetName ¶

func (s *Filter) SetName(v string) *Filter

SetName sets the Name field's value.

func (*Filter) SetValues ¶

func (s *Filter) SetValues(v []*string) *Filter

SetValues sets the Values field's value.

func (Filter) String ¶

func (s Filter) String() string

String returns the string representation

func (*Filter) Validate ¶

func (s *Filter) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetDiscoverySummaryInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/GetDiscoverySummaryRequest

type GetDiscoverySummaryInput struct {
    // contains filtered or unexported fields
}

func (GetDiscoverySummaryInput) GoString ¶

func (s GetDiscoverySummaryInput) GoString() string

GoString returns the string representation

func (GetDiscoverySummaryInput) String ¶

func (s GetDiscoverySummaryInput) String() string

String returns the string representation

type GetDiscoverySummaryOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/GetDiscoverySummaryResponse

type GetDiscoverySummaryOutput struct {

    // Details about discovered agents, including agent status and health.
    AgentSummary *CustomerAgentInfo `locationName:"agentSummary" type:"structure"`

    // The number of applications discovered.
    Applications *int64 `locationName:"applications" type:"long"`

    // Details about discovered connectors, including connector status and health.
    ConnectorSummary *CustomerConnectorInfo `locationName:"connectorSummary" type:"structure"`

    // The number of servers discovered.
    Servers *int64 `locationName:"servers" type:"long"`

    // The number of servers mapped to applications.
    ServersMappedToApplications *int64 `locationName:"serversMappedToApplications" type:"long"`

    // The number of servers mapped to tags.
    ServersMappedtoTags *int64 `locationName:"serversMappedtoTags" type:"long"`
    // contains filtered or unexported fields
}

func (GetDiscoverySummaryOutput) GoString ¶

func (s GetDiscoverySummaryOutput) GoString() string

GoString returns the string representation

func (*GetDiscoverySummaryOutput) SetAgentSummary ¶

func (s *GetDiscoverySummaryOutput) SetAgentSummary(v *CustomerAgentInfo) *GetDiscoverySummaryOutput

SetAgentSummary sets the AgentSummary field's value.

func (*GetDiscoverySummaryOutput) SetApplications ¶

func (s *GetDiscoverySummaryOutput) SetApplications(v int64) *GetDiscoverySummaryOutput

SetApplications sets the Applications field's value.

func (*GetDiscoverySummaryOutput) SetConnectorSummary ¶

func (s *GetDiscoverySummaryOutput) SetConnectorSummary(v *CustomerConnectorInfo) *GetDiscoverySummaryOutput

SetConnectorSummary sets the ConnectorSummary field's value.

func (*GetDiscoverySummaryOutput) SetServers ¶

func (s *GetDiscoverySummaryOutput) SetServers(v int64) *GetDiscoverySummaryOutput

SetServers sets the Servers field's value.

func (*GetDiscoverySummaryOutput) SetServersMappedToApplications ¶

func (s *GetDiscoverySummaryOutput) SetServersMappedToApplications(v int64) *GetDiscoverySummaryOutput

SetServersMappedToApplications sets the ServersMappedToApplications field's value.

func (*GetDiscoverySummaryOutput) SetServersMappedtoTags ¶

func (s *GetDiscoverySummaryOutput) SetServersMappedtoTags(v int64) *GetDiscoverySummaryOutput

SetServersMappedtoTags sets the ServersMappedtoTags field's value.

func (GetDiscoverySummaryOutput) String ¶

func (s GetDiscoverySummaryOutput) String() string

String returns the string representation

type ListConfigurationsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListConfigurationsRequest

type ListConfigurationsInput struct {

    // A valid configuration identified by Application Discovery Service.
    //
    // ConfigurationType is a required field
    ConfigurationType *string `locationName:"configurationType" type:"string" required:"true" enum:"ConfigurationItemType"`

    // You can filter the request using various logical operators and a key-value
    // format. For example:
    //
    // {"key": "serverType", "value": "webServer"}
    //
    // For a complete list of filter options and guidance about using them with
    // this action, see Querying Discovered Configuration Items (http://docs.aws.amazon.com/application-discovery/latest/APIReference/discovery-api-queries.html#ListConfigurations).
    Filters []*Filter `locationName:"filters" type:"list"`

    // The total number of items to return. The maximum value is 100.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // Token to retrieve the next set of results. For example, if a previous call
    // to ListConfigurations returned 100 items, but you set ListConfigurationsRequest$maxResults
    // to 10, you received a set of 10 results along with a token. Use that token
    // in this query to get the next set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`

    // Certain filter criteria return output that can be sorted in ascending or
    // descending order. For a list of output characteristics for each filter, see
    // Using the ListConfigurations Action (http://docs.aws.amazon.com/application-discovery/latest/APIReference/discovery-api-queries.html#ListConfigurations).
    OrderBy []*OrderByElement `locationName:"orderBy" type:"list"`
    // contains filtered or unexported fields
}

func (ListConfigurationsInput) GoString ¶

func (s ListConfigurationsInput) GoString() string

GoString returns the string representation

func (*ListConfigurationsInput) SetConfigurationType ¶

func (s *ListConfigurationsInput) SetConfigurationType(v string) *ListConfigurationsInput

SetConfigurationType sets the ConfigurationType field's value.

func (*ListConfigurationsInput) SetFilters ¶

func (s *ListConfigurationsInput) SetFilters(v []*Filter) *ListConfigurationsInput

SetFilters sets the Filters field's value.

func (*ListConfigurationsInput) SetMaxResults ¶

func (s *ListConfigurationsInput) SetMaxResults(v int64) *ListConfigurationsInput

SetMaxResults sets the MaxResults field's value.

func (*ListConfigurationsInput) SetNextToken ¶

func (s *ListConfigurationsInput) SetNextToken(v string) *ListConfigurationsInput

SetNextToken sets the NextToken field's value.

func (*ListConfigurationsInput) SetOrderBy ¶

func (s *ListConfigurationsInput) SetOrderBy(v []*OrderByElement) *ListConfigurationsInput

SetOrderBy sets the OrderBy field's value.

func (ListConfigurationsInput) String ¶

func (s ListConfigurationsInput) String() string

String returns the string representation

func (*ListConfigurationsInput) Validate ¶

func (s *ListConfigurationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListConfigurationsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListConfigurationsResponse

type ListConfigurationsOutput struct {

    // Returns configuration details, including the configuration ID, attribute
    // names, and attribute values.
    Configurations []map[string]*string `locationName:"configurations" type:"list"`

    // Token to retrieve the next set of results. For example, if your call to ListConfigurations
    // returned 100 items, but you set ListConfigurationsRequest$maxResults to 10,
    // you received a set of 10 results along with this token. Use this token in
    // the next query to retrieve the next set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListConfigurationsOutput) GoString ¶

func (s ListConfigurationsOutput) GoString() string

GoString returns the string representation

func (*ListConfigurationsOutput) SetConfigurations ¶

func (s *ListConfigurationsOutput) SetConfigurations(v []map[string]*string) *ListConfigurationsOutput

SetConfigurations sets the Configurations field's value.

func (*ListConfigurationsOutput) SetNextToken ¶

func (s *ListConfigurationsOutput) SetNextToken(v string) *ListConfigurationsOutput

SetNextToken sets the NextToken field's value.

func (ListConfigurationsOutput) String ¶

func (s ListConfigurationsOutput) String() string

String returns the string representation

type ListServerNeighborsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListServerNeighborsRequest

type ListServerNeighborsInput struct {

    // Configuration ID of the server for which neighbors are being listed.
    //
    // ConfigurationId is a required field
    ConfigurationId *string `locationName:"configurationId" type:"string" required:"true"`

    // Maximum number of results to return in a single page of output.
    MaxResults *int64 `locationName:"maxResults" type:"integer"`

    // List of configuration IDs to test for one-hop-away.
    NeighborConfigurationIds []*string `locationName:"neighborConfigurationIds" type:"list"`

    // Token to retrieve the next set of results. For example, if you previously
    // specified 100 IDs for ListServerNeighborsRequest$neighborConfigurationIds
    // but set ListServerNeighborsRequest$maxResults to 10, you received a set of
    // 10 results along with a token. Use that token in this query to get the next
    // set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`

    // Flag to indicate if port and protocol information is needed as part of the
    // response.
    PortInformationNeeded *bool `locationName:"portInformationNeeded" type:"boolean"`
    // contains filtered or unexported fields
}

func (ListServerNeighborsInput) GoString ¶

func (s ListServerNeighborsInput) GoString() string

GoString returns the string representation

func (*ListServerNeighborsInput) SetConfigurationId ¶

func (s *ListServerNeighborsInput) SetConfigurationId(v string) *ListServerNeighborsInput

SetConfigurationId sets the ConfigurationId field's value.

func (*ListServerNeighborsInput) SetMaxResults ¶

func (s *ListServerNeighborsInput) SetMaxResults(v int64) *ListServerNeighborsInput

SetMaxResults sets the MaxResults field's value.

func (*ListServerNeighborsInput) SetNeighborConfigurationIds ¶

func (s *ListServerNeighborsInput) SetNeighborConfigurationIds(v []*string) *ListServerNeighborsInput

SetNeighborConfigurationIds sets the NeighborConfigurationIds field's value.

func (*ListServerNeighborsInput) SetNextToken ¶

func (s *ListServerNeighborsInput) SetNextToken(v string) *ListServerNeighborsInput

SetNextToken sets the NextToken field's value.

func (*ListServerNeighborsInput) SetPortInformationNeeded ¶

func (s *ListServerNeighborsInput) SetPortInformationNeeded(v bool) *ListServerNeighborsInput

SetPortInformationNeeded sets the PortInformationNeeded field's value.

func (ListServerNeighborsInput) String ¶

func (s ListServerNeighborsInput) String() string

String returns the string representation

func (*ListServerNeighborsInput) Validate ¶

func (s *ListServerNeighborsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListServerNeighborsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/ListServerNeighborsResponse

type ListServerNeighborsOutput struct {

    // Count of distinct servers that are one hop away from the given server.
    KnownDependencyCount *int64 `locationName:"knownDependencyCount" type:"long"`

    // List of distinct servers that are one hop away from the given server.
    //
    // Neighbors is a required field
    Neighbors []*NeighborConnectionDetail `locationName:"neighbors" type:"list" required:"true"`

    // Token to retrieve the next set of results. For example, if you specified
    // 100 IDs for ListServerNeighborsRequest$neighborConfigurationIds but set ListServerNeighborsRequest$maxResults
    // to 10, you received a set of 10 results along with this token. Use this token
    // in the next query to retrieve the next set of 10.
    NextToken *string `locationName:"nextToken" type:"string"`
    // contains filtered or unexported fields
}

func (ListServerNeighborsOutput) GoString ¶

func (s ListServerNeighborsOutput) GoString() string

GoString returns the string representation

func (*ListServerNeighborsOutput) SetKnownDependencyCount ¶

func (s *ListServerNeighborsOutput) SetKnownDependencyCount(v int64) *ListServerNeighborsOutput

SetKnownDependencyCount sets the KnownDependencyCount field's value.

func (*ListServerNeighborsOutput) SetNeighbors ¶

func (s *ListServerNeighborsOutput) SetNeighbors(v []*NeighborConnectionDetail) *ListServerNeighborsOutput

SetNeighbors sets the Neighbors field's value.

func (*ListServerNeighborsOutput) SetNextToken ¶

func (s *ListServerNeighborsOutput) SetNextToken(v string) *ListServerNeighborsOutput

SetNextToken sets the NextToken field's value.

func (ListServerNeighborsOutput) String ¶

func (s ListServerNeighborsOutput) String() string

String returns the string representation

type NeighborConnectionDetail ¶

Details about neighboring servers. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/NeighborConnectionDetail

type NeighborConnectionDetail struct {

    // The number of open network connections with the neighboring server.
    //
    // ConnectionsCount is a required field
    ConnectionsCount *int64 `locationName:"connectionsCount" type:"long" required:"true"`

    // The destination network port for the connection.
    DestinationPort *int64 `locationName:"destinationPort" type:"integer"`

    // The ID of the server that accepted the network connection.
    //
    // DestinationServerId is a required field
    DestinationServerId *string `locationName:"destinationServerId" type:"string" required:"true"`

    // The ID of the server that opened the network connection.
    //
    // SourceServerId is a required field
    SourceServerId *string `locationName:"sourceServerId" type:"string" required:"true"`

    // The network protocol used for the connection.
    TransportProtocol *string `locationName:"transportProtocol" type:"string"`
    // contains filtered or unexported fields
}

func (NeighborConnectionDetail) GoString ¶

func (s NeighborConnectionDetail) GoString() string

GoString returns the string representation

func (*NeighborConnectionDetail) SetConnectionsCount ¶

func (s *NeighborConnectionDetail) SetConnectionsCount(v int64) *NeighborConnectionDetail

SetConnectionsCount sets the ConnectionsCount field's value.

func (*NeighborConnectionDetail) SetDestinationPort ¶

func (s *NeighborConnectionDetail) SetDestinationPort(v int64) *NeighborConnectionDetail

SetDestinationPort sets the DestinationPort field's value.

func (*NeighborConnectionDetail) SetDestinationServerId ¶

func (s *NeighborConnectionDetail) SetDestinationServerId(v string) *NeighborConnectionDetail

SetDestinationServerId sets the DestinationServerId field's value.

func (*NeighborConnectionDetail) SetSourceServerId ¶

func (s *NeighborConnectionDetail) SetSourceServerId(v string) *NeighborConnectionDetail

SetSourceServerId sets the SourceServerId field's value.

func (*NeighborConnectionDetail) SetTransportProtocol ¶

func (s *NeighborConnectionDetail) SetTransportProtocol(v string) *NeighborConnectionDetail

SetTransportProtocol sets the TransportProtocol field's value.

func (NeighborConnectionDetail) String ¶

func (s NeighborConnectionDetail) String() string

String returns the string representation

type OrderByElement ¶

A field and direction for ordered output. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/OrderByElement

type OrderByElement struct {

    // The field on which to order.
    //
    // FieldName is a required field
    FieldName *string `locationName:"fieldName" type:"string" required:"true"`

    // Ordering direction.
    SortOrder *string `locationName:"sortOrder" type:"string" enum:"orderString"`
    // contains filtered or unexported fields
}

func (OrderByElement) GoString ¶

func (s OrderByElement) GoString() string

GoString returns the string representation

func (*OrderByElement) SetFieldName ¶

func (s *OrderByElement) SetFieldName(v string) *OrderByElement

SetFieldName sets the FieldName field's value.

func (*OrderByElement) SetSortOrder ¶

func (s *OrderByElement) SetSortOrder(v string) *OrderByElement

SetSortOrder sets the SortOrder field's value.

func (OrderByElement) String ¶

func (s OrderByElement) String() string

String returns the string representation

func (*OrderByElement) Validate ¶

func (s *OrderByElement) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StartDataCollectionByAgentIdsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartDataCollectionByAgentIdsRequest

type StartDataCollectionByAgentIdsInput struct {

    // The IDs of the agents or connectors from which to start collecting data.
    // If you send a request to an agent/connector ID that you do not have permission
    // to contact, according to your AWS account, the service does not throw an
    // exception. Instead, it returns the error in the Description field. If you
    // send a request to multiple agents/connectors and you do not have permission
    // to contact some of those agents/connectors, the system does not throw an
    // exception. Instead, the system shows Failed in the Description field.
    //
    // AgentIds is a required field
    AgentIds []*string `locationName:"agentIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (StartDataCollectionByAgentIdsInput) GoString ¶

func (s StartDataCollectionByAgentIdsInput) GoString() string

GoString returns the string representation

func (*StartDataCollectionByAgentIdsInput) SetAgentIds ¶

func (s *StartDataCollectionByAgentIdsInput) SetAgentIds(v []*string) *StartDataCollectionByAgentIdsInput

SetAgentIds sets the AgentIds field's value.

func (StartDataCollectionByAgentIdsInput) String ¶

func (s StartDataCollectionByAgentIdsInput) String() string

String returns the string representation

func (*StartDataCollectionByAgentIdsInput) Validate ¶

func (s *StartDataCollectionByAgentIdsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StartDataCollectionByAgentIdsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartDataCollectionByAgentIdsResponse

type StartDataCollectionByAgentIdsOutput struct {

    // Information about agents or the connector that were instructed to start collecting
    // data. Information includes the agent/connector ID, a description of the operation
    // performed, and whether the agent/connector configuration was updated.
    AgentsConfigurationStatus []*AgentConfigurationStatus `locationName:"agentsConfigurationStatus" type:"list"`
    // contains filtered or unexported fields
}

func (StartDataCollectionByAgentIdsOutput) GoString ¶

func (s StartDataCollectionByAgentIdsOutput) GoString() string

GoString returns the string representation

func (*StartDataCollectionByAgentIdsOutput) SetAgentsConfigurationStatus ¶

func (s *StartDataCollectionByAgentIdsOutput) SetAgentsConfigurationStatus(v []*AgentConfigurationStatus) *StartDataCollectionByAgentIdsOutput

SetAgentsConfigurationStatus sets the AgentsConfigurationStatus field's value.

func (StartDataCollectionByAgentIdsOutput) String ¶

func (s StartDataCollectionByAgentIdsOutput) String() string

String returns the string representation

type StartExportTaskInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartExportTaskRequest

type StartExportTaskInput struct {

    // The file format for the returned export data. Default value is CSV.
    ExportDataFormat []*string `locationName:"exportDataFormat" type:"list"`
    // contains filtered or unexported fields
}

func (StartExportTaskInput) GoString ¶

func (s StartExportTaskInput) GoString() string

GoString returns the string representation

func (*StartExportTaskInput) SetExportDataFormat ¶

func (s *StartExportTaskInput) SetExportDataFormat(v []*string) *StartExportTaskInput

SetExportDataFormat sets the ExportDataFormat field's value.

func (StartExportTaskInput) String ¶

func (s StartExportTaskInput) String() string

String returns the string representation

type StartExportTaskOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StartExportTaskResponse

type StartExportTaskOutput struct {

    // A unique identifier used to query the status of an export request.
    ExportId *string `locationName:"exportId" type:"string"`
    // contains filtered or unexported fields
}

func (StartExportTaskOutput) GoString ¶

func (s StartExportTaskOutput) GoString() string

GoString returns the string representation

func (*StartExportTaskOutput) SetExportId ¶

func (s *StartExportTaskOutput) SetExportId(v string) *StartExportTaskOutput

SetExportId sets the ExportId field's value.

func (StartExportTaskOutput) String ¶

func (s StartExportTaskOutput) String() string

String returns the string representation

type StopDataCollectionByAgentIdsInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StopDataCollectionByAgentIdsRequest

type StopDataCollectionByAgentIdsInput struct {

    // The IDs of the agents or connectors from which to stop collecting data.
    //
    // AgentIds is a required field
    AgentIds []*string `locationName:"agentIds" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (StopDataCollectionByAgentIdsInput) GoString ¶

func (s StopDataCollectionByAgentIdsInput) GoString() string

GoString returns the string representation

func (*StopDataCollectionByAgentIdsInput) SetAgentIds ¶

func (s *StopDataCollectionByAgentIdsInput) SetAgentIds(v []*string) *StopDataCollectionByAgentIdsInput

SetAgentIds sets the AgentIds field's value.

func (StopDataCollectionByAgentIdsInput) String ¶

func (s StopDataCollectionByAgentIdsInput) String() string

String returns the string representation

func (*StopDataCollectionByAgentIdsInput) Validate ¶

func (s *StopDataCollectionByAgentIdsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type StopDataCollectionByAgentIdsOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/StopDataCollectionByAgentIdsResponse

type StopDataCollectionByAgentIdsOutput struct {

    // Information about the agents or connector that were instructed to stop collecting
    // data. Information includes the agent/connector ID, a description of the operation
    // performed, and whether the agent/connector configuration was updated.
    AgentsConfigurationStatus []*AgentConfigurationStatus `locationName:"agentsConfigurationStatus" type:"list"`
    // contains filtered or unexported fields
}

func (StopDataCollectionByAgentIdsOutput) GoString ¶

func (s StopDataCollectionByAgentIdsOutput) GoString() string

GoString returns the string representation

func (*StopDataCollectionByAgentIdsOutput) SetAgentsConfigurationStatus ¶

func (s *StopDataCollectionByAgentIdsOutput) SetAgentsConfigurationStatus(v []*AgentConfigurationStatus) *StopDataCollectionByAgentIdsOutput

SetAgentsConfigurationStatus sets the AgentsConfigurationStatus field's value.

func (StopDataCollectionByAgentIdsOutput) String ¶

func (s StopDataCollectionByAgentIdsOutput) String() string

String returns the string representation

type Tag ¶

Metadata that help you categorize IT assets. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/Tag

type Tag struct {

    // The type of tag on which to filter.
    //
    // Key is a required field
    Key *string `locationName:"key" type:"string" required:"true"`

    // A value for a tag key on which to filter.
    //
    // Value is a required field
    Value *string `locationName:"value" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (Tag) GoString ¶

func (s Tag) GoString() string

GoString returns the string representation

func (*Tag) SetKey ¶

func (s *Tag) SetKey(v string) *Tag

SetKey sets the Key field's value.

func (*Tag) SetValue ¶

func (s *Tag) SetValue(v string) *Tag

SetValue sets the Value field's value.

func (Tag) String ¶

func (s Tag) String() string

String returns the string representation

func (*Tag) Validate ¶

func (s *Tag) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TagFilter ¶

The tag filter. Valid names are: tagKey, tagValue, configurationId. Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/TagFilter

type TagFilter struct {

    // A name of the tag filter.
    //
    // Name is a required field
    Name *string `locationName:"name" type:"string" required:"true"`

    // Values for the tag filter.
    //
    // Values is a required field
    Values []*string `locationName:"values" locationNameList:"item" type:"list" required:"true"`
    // contains filtered or unexported fields
}

func (TagFilter) GoString ¶

func (s TagFilter) GoString() string

GoString returns the string representation

func (*TagFilter) SetName ¶

func (s *TagFilter) SetName(v string) *TagFilter

SetName sets the Name field's value.

func (*TagFilter) SetValues ¶

func (s *TagFilter) SetValues(v []*string) *TagFilter

SetValues sets the Values field's value.

func (TagFilter) String ¶

func (s TagFilter) String() string

String returns the string representation

func (*TagFilter) Validate ¶

func (s *TagFilter) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateApplicationInput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/UpdateApplicationRequest

type UpdateApplicationInput struct {

    // Configuration ID of the application to be updated.
    //
    // ConfigurationId is a required field
    ConfigurationId *string `locationName:"configurationId" type:"string" required:"true"`

    // New description of the application to be updated.
    Description *string `locationName:"description" type:"string"`

    // New name of the application to be updated.
    Name *string `locationName:"name" type:"string"`
    // contains filtered or unexported fields
}

func (UpdateApplicationInput) GoString ¶

func (s UpdateApplicationInput) GoString() string

GoString returns the string representation

func (*UpdateApplicationInput) SetConfigurationId ¶

func (s *UpdateApplicationInput) SetConfigurationId(v string) *UpdateApplicationInput

SetConfigurationId sets the ConfigurationId field's value.

func (*UpdateApplicationInput) SetDescription ¶

func (s *UpdateApplicationInput) SetDescription(v string) *UpdateApplicationInput

SetDescription sets the Description field's value.

func (*UpdateApplicationInput) SetName ¶

func (s *UpdateApplicationInput) SetName(v string) *UpdateApplicationInput

SetName sets the Name field's value.

func (UpdateApplicationInput) String ¶

func (s UpdateApplicationInput) String() string

String returns the string representation

func (*UpdateApplicationInput) Validate ¶

func (s *UpdateApplicationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateApplicationOutput ¶

Please also see https://docs.aws.amazon.com/goto/WebAPI/discovery-2015-11-01/UpdateApplicationResponse

type UpdateApplicationOutput struct {
    // contains filtered or unexported fields
}

func (UpdateApplicationOutput) GoString ¶

func (s UpdateApplicationOutput) GoString() string

GoString returns the string representation

func (UpdateApplicationOutput) String ¶

func (s UpdateApplicationOutput) String() string

String returns the string representation

Subdirectories