Perl 5 version 24.3 documentation

Test

NAME

Test - provides a simple framework for writing test scripts

SYNOPSIS

  1. use strict;
  2. use Test;
  3. # use a BEGIN block so we print our plan before MyModule is loaded
  4. BEGIN { plan tests => 14, todo => [3,4] }
  5. # load your module...
  6. use MyModule;
  7. # Helpful notes. All note-lines must start with a "#".
  8. print "# I'm testing MyModule version $MyModule::VERSION\n";
  9. ok(0); # failure
  10. ok(1); # success
  11. ok(0); # ok, expected failure (see todo list, above)
  12. ok(1); # surprise success!
  13. ok(0,1); # failure: '0' ne '1'
  14. ok('broke','fixed'); # failure: 'broke' ne 'fixed'
  15. ok('fixed','fixed'); # success: 'fixed' eq 'fixed'
  16. ok('fixed',qr/x/); # success: 'fixed' =~ qr/x/
  17. ok(sub { 1+1 }, 2); # success: '2' eq '2'
  18. ok(sub { 1+1 }, 3); # failure: '2' ne '3'
  19. my @list = (0,0);
  20. ok @list, 3, "\@list=".join(',',@list); #extra notes
  21. ok 'segmentation fault', '/(?i)success/'; #regex match
  22. skip(
  23. $^O =~ m/MSWin/ ? "Skip if MSWin" : 0, # whether to skip
  24. $foo, $bar # arguments just like for ok(...)
  25. );
  26. skip(
  27. $^O =~ m/MSWin/ ? 0 : "Skip unless MSWin", # whether to skip
  28. $foo, $bar # arguments just like for ok(...)
  29. );

DESCRIPTION

This module simplifies the task of writing test files for Perl modules, such that their output is in the format that Test::Harness expects to see.

QUICK START GUIDE

To write a test for your new (and probably not even done) module, create a new file called t/test.t (in a new t directory). If you have multiple test files, to test the "foo", "bar", and "baz" feature sets, then feel free to call your files t/foo.t, t/bar.t, and t/baz.t

Functions

This module defines three public functions, plan(...) , ok(...) , and skip(...) . By default, all three are exported by the use Test; statement.

  • plan(...)
    1. BEGIN { plan %theplan; }

    This should be the first thing you call in your test script. It declares your testing plan, how many there will be, if any of them should be allowed to fail, and so on.

    Typical usage is just:

    1. use Test;
    2. BEGIN { plan tests => 23 }

    These are the things that you can put in the parameters to plan:

    • tests => number

      The number of tests in your script. This means all ok() and skip() calls.

    • todo => [1,5,14]

      A reference to a list of tests which are allowed to fail. See TODO TESTS.

    • onfail => sub { ... }
    • onfail => \&some_sub

      A subroutine reference to be run at the end of the test script, if any of the tests fail. See ONFAIL.

    You must call plan(...) once and only once. You should call it in a BEGIN {...} block, like so:

    1. BEGIN { plan tests => 23 }
  • ok(...)
    1. ok(1 + 1 == 2);
    2. ok($have, $expect);
    3. ok($have, $expect, $diagnostics);

    This function is the reason for Test 's existence. It's the basic function that handles printing "ok " or "not ok ", along with the current test number. (That's what Test::Harness wants to see.)

    In its most basic usage, ok(...) simply takes a single scalar expression. If its value is true, the test passes; if false, the test fails. Examples:

    1. # Examples of ok(scalar)
    2. ok( 1 + 1 == 2 ); # ok if 1 + 1 == 2
    3. ok( $foo =~ /bar/ ); # ok if $foo contains 'bar'
    4. ok( baz($x + $y) eq 'Armondo' ); # ok if baz($x + $y) returns
    5. # 'Armondo'
    6. ok( @a == @b ); # ok if @a and @b are the same
    7. # length

    The expression is evaluated in scalar context. So the following will work:

    1. ok( @stuff ); # ok if @stuff has any
    2. # elements
    3. ok( !grep !defined $_, @stuff ); # ok if everything in @stuff
    4. # is defined.

    A special case is if the expression is a subroutine reference (in either sub {...} syntax or \&foo syntax). In that case, it is executed and its value (true or false) determines if the test passes or fails. For example,

    1. ok( sub { # See whether sleep works at least passably
    2. my $start_time = time;
    3. sleep 5;
    4. time() - $start_time >= 4
    5. });

    In its two-argument form, ok(arg1, arg2) compares the two scalar values to see if they match. They match if both are undefined, or if arg2 is a regex that matches arg1, or if they compare equal with eq.

    1. # Example of ok(scalar, scalar)
    2. ok( "this", "that" ); # not ok, 'this' ne 'that'
    3. ok( "", undef ); # not ok, "" is defined

    The second argument is considered a regex if it is either a regex object or a string that looks like a regex. Regex objects are constructed with the qr// operator in recent versions of perl. A string is considered to look like a regex if its first and last characters are "/", or if the first character is "m" and its second and last characters are both the same non-alphanumeric non-whitespace character. These regexp

    Regex examples:

    1. ok( 'JaffO', '/Jaff/' ); # ok, 'JaffO' =~ /Jaff/
    2. ok( 'JaffO', 'm|Jaff|' ); # ok, 'JaffO' =~ m|Jaff|
    3. ok( 'JaffO', qr/Jaff/ ); # ok, 'JaffO' =~ qr/Jaff/;
    4. ok( 'JaffO', '/(?i)jaff/ ); # ok, 'JaffO' =~ /jaff/i;

    If either (or both!) is a subroutine reference, it is run and used as the value for comparing. For example:

    1. ok sub {
    2. open(OUT, ">x.dat") || die $!;
    3. print OUT "\x{e000}";
    4. close OUT;
    5. my $bytecount = -s 'x.dat';
    6. unlink 'x.dat' or warn "Can't unlink : $!";
    7. return $bytecount;
    8. },
    9. 4
    10. ;

    The above test passes two values to ok(arg1, arg2) -- the first a coderef, and the second is the number 4. Before ok compares them, it calls the coderef, and uses its return value as the real value of this parameter. Assuming that $bytecount returns 4, ok ends up testing 4 eq 4 . Since that's true, this test passes.

    Finally, you can append an optional third argument, in ok(arg1,arg2, note), where note is a string value that will be printed if the test fails. This should be some useful information about the test, pertaining to why it failed, and/or a description of the test. For example:

    1. ok( grep($_ eq 'something unique', @stuff), 1,
    2. "Something that should be unique isn't!\n".
    3. '@stuff = '.join ', ', @stuff
    4. );

    Unfortunately, a note cannot be used with the single argument style of ok() . That is, if you try ok(arg1, note), then Test will interpret this as ok(arg1, arg2), and probably end up testing arg1 eq arg2 -- and that's not what you want!

    All of the above special cases can occasionally cause some problems. See BUGS and CAVEATS.

  • skip(skip_if_true, args...)

    This is used for tests that under some conditions can be skipped. It's basically equivalent to:

    1. if( $skip_if_true ) {
    2. ok(1);
    3. } else {
    4. ok( args... );
    5. }

    ...except that the ok(1) emits not just "ok testnum" but actually "ok testnum # skip_if_true_value".

    The arguments after the skip_if_true are what is fed to ok(...) if this test isn't skipped.

    Example usage:

    1. my $if_MSWin =
    2. $^O =~ m/MSWin/ ? 'Skip if under MSWin' : '';
    3. # A test to be skipped if under MSWin (i.e., run except under
    4. # MSWin)
    5. skip($if_MSWin, thing($foo), thing($bar) );

    Or, going the other way:

    1. my $unless_MSWin =
    2. $^O =~ m/MSWin/ ? '' : 'Skip unless under MSWin';
    3. # A test to be skipped unless under MSWin (i.e., run only under
    4. # MSWin)
    5. skip($unless_MSWin, thing($foo), thing($bar) );

    The tricky thing to remember is that the first parameter is true if you want to skip the test, not run it; and it also doubles as a note about why it's being skipped. So in the first codeblock above, read the code as "skip if MSWin -- (otherwise) test whether thing($foo) is thing($bar) " or for the second case, "skip unless MSWin...".

    Also, when your skip_if_reason string is true, it really should (for backwards compatibility with older Test.pm versions) start with the string "Skip", as shown in the above examples.

    Note that in the above cases, thing($foo) and thing($bar) are evaluated -- but as long as the skip_if_true is true, then we skip(...) just tosses out their value (i.e., not bothering to treat them like values to ok(...) . But if you need to not eval the arguments when skipping the test, use this format:

    1. skip( $unless_MSWin,
    2. sub {
    3. # This code returns true if the test passes.
    4. # (But it doesn't even get called if the test is skipped.)
    5. thing($foo) eq thing($bar)
    6. }
    7. );

    or even this, which is basically equivalent:

    1. skip( $unless_MSWin,
    2. sub { thing($foo) }, sub { thing($bar) }
    3. );

    That is, both are like this:

    1. if( $unless_MSWin ) {
    2. ok(1); # but it actually appends "# $unless_MSWin"
    3. # so that Test::Harness can tell it's a skip
    4. } else {
    5. # Not skipping, so actually call and evaluate...
    6. ok( sub { thing($foo) }, sub { thing($bar) } );
    7. }

TEST TYPES

  • NORMAL TESTS

    These tests are expected to succeed. Usually, most or all of your tests are in this category. If a normal test doesn't succeed, then that means that something is wrong.

  • SKIPPED TESTS

    The skip(...) function is for tests that might or might not be possible to run, depending on the availability of platform-specific features. The first argument should evaluate to true (think "yes, please skip") if the required feature is not available. After the first argument, skip(...) works exactly the same way as ok(...) does.

  • TODO TESTS

    TODO tests are designed for maintaining an executable TODO list. These tests are expected to fail. If a TODO test does succeed, then the feature in question shouldn't be on the TODO list, now should it?

    Packages should NOT be released with succeeding TODO tests. As soon as a TODO test starts working, it should be promoted to a normal test, and the newly working feature should be documented in the release notes or in the change log.

ONFAIL

  1. BEGIN { plan test => 4, onfail => sub { warn "CALL 911!" } }

Although test failures should be enough, extra diagnostics can be triggered at the end of a test run. onfail is passed an array ref of hash refs that describe each test failure. Each hash will contain at least the following fields: package, repetition , and result . (You shouldn't rely on any other fields being present.) If the test had an expected value or a diagnostic (or "note") string, these will also be included.

The optional onfail hook might be used simply to print out the version of your package and/or how to report problems. It might also be used to generate extremely sophisticated diagnostics for a particularly bizarre test failure. However it's not a panacea. Core dumps or other unrecoverable errors prevent the onfail hook from running. (It is run inside an END block.) Besides, onfail is probably over-kill in most cases. (Your test code should be simpler than the code it is testing, yes?)

BUGS and CAVEATS

  • ok(...) 's special handing of strings which look like they might be regexes can also cause unexpected behavior. An innocent:

    1. ok( $fileglob, '/path/to/some/*stuff/' );

    will fail, since Test.pm considers the second argument to be a regex! The best bet is to use the one-argument form:

    1. ok( $fileglob eq '/path/to/some/*stuff/' );
  • ok(...) 's use of string eq can sometimes cause odd problems when comparing numbers, especially if you're casting a string to a number:

    1. $foo = "1.0";
    2. ok( $foo, 1 ); # not ok, "1.0" ne 1

    Your best bet is to use the single argument form:

    1. ok( $foo == 1 ); # ok "1.0" == 1
  • As you may have inferred from the above documentation and examples, ok 's prototype is ($;$$) (and, incidentally, skip 's is ($;$$$)). This means, for example, that you can do ok @foo, @bar to compare the size of the two arrays. But don't be fooled into thinking that ok @foo, @bar means a comparison of the contents of two arrays -- you're comparing just the number of elements of each. It's so easy to make that mistake in reading ok @foo, @bar that you might want to be very explicit about it, and instead write ok scalar(@foo), scalar(@bar) .

  • This almost definitely doesn't do what you expect:

    1. ok $thingy->can('some_method');

    Why? Because can returns a coderef to mean "yes it can (and the method is this...)", and then ok sees a coderef and thinks you're passing a function that you want it to call and consider the truth of the result of! I.e., just like:

    1. ok $thingy->can('some_method')->();

    What you probably want instead is this:

    1. ok $thingy->can('some_method') && 1;

    If the can returns false, then that is passed to ok . If it returns true, then the larger expression $thingy->can('some_method') && 1 returns 1, which ok sees as a simple signal of success, as you would expect.

  • The syntax for skip is about the only way it can be, but it's still quite confusing. Just start with the above examples and you'll be okay.

    Moreover, users may expect this:

    1. skip $unless_mswin, foo($bar), baz($quux);

    to not evaluate foo($bar) and baz($quux) when the test is being skipped. But in reality, they are evaluated, but skip just won't bother comparing them if $unless_mswin is true.

    You could do this:

    1. skip $unless_mswin, sub{foo($bar)}, sub{baz($quux)};

    But that's not terribly pretty. You may find it simpler or clearer in the long run to just do things like this:

    1. if( $^O =~ m/MSWin/ ) {
    2. print "# Yay, we're under $^O\n";
    3. ok foo($bar), baz($quux);
    4. ok thing($whatever), baz($stuff);
    5. ok blorp($quux, $whatever);
    6. ok foo($barzbarz), thang($quux);
    7. } else {
    8. print "# Feh, we're under $^O. Watch me skip some tests...\n";
    9. for(1 .. 4) { skip "Skip unless under MSWin" }
    10. }

    But be quite sure that ok is called exactly as many times in the first block as skip is called in the second block.

ENVIRONMENT

If PERL_TEST_DIFF environment variable is set, it will be used as a command for comparing unexpected multiline results. If you have GNU diff installed, you might want to set PERL_TEST_DIFF to diff -u . If you don't have a suitable program, you might install the Text::Diff module and then set PERL_TEST_DIFF to be perl -MText::Diff -e 'print diff(@ARGV)' . If PERL_TEST_DIFF isn't set but the Algorithm::Diff module is available, then it will be used to show the differences in multiline results.

NOTE

A past developer of this module once said that it was no longer being actively developed. However, rumors of its demise were greatly exaggerated. Feedback and suggestions are quite welcome.

Be aware that the main value of this module is its simplicity. Note that there are already more ambitious modules out there, such as Test::More and Test::Unit.

Some earlier versions of this module had docs with some confusing typos in the description of skip(...) .

SEE ALSO

Test::Harness

Test::Simple, Test::More, Devel::Cover

Test::Builder for building your own testing library.

Test::Unit is an interesting XUnit-style testing library.

Test::Inline lets you embed tests in code.

AUTHOR

Copyright (c) 1998-2000 Joshua Nathaniel Pritikin.

Copyright (c) 2001-2002 Michael G. Schwern.

Copyright (c) 2002-2004 Sean M. Burke.

Current maintainer: Jesse Vincent. <jesse@bestpractical.com>

This package is free software and is provided "as is" without express or implied warranty. It may be used, redistributed and/or modified under the same terms as Perl itself.