Title:Coercing the legacy C locale to a UTF-8 based locale
Author:Nick Coghlan <ncoghlan at gmail.com>
BDFL-Delegate:Barry Warsaw
Type:Standards Track
Post-History:03-Jan-2017 (linux-sig), 07-Jan-2017 (python-ideas), 05-Mar-2017 (python-dev)

An ongoing challenge with Python 3 on *nix systems is the conflict between needing to use the configured locale encoding by default for consistency with other locale-aware components in the same process subprocesses, and the fact that the standard C locale (as defined in POSIX:2001) typically implies a default text encoding of ASCII, which is entirely inadequate for the development of networked services and client applications in a multilingual world.

PEP 540 proposes a change to CPython's handling of the legacy C locale such that CPython will assume the use of UTF-8 in such environments, rather than persisting with the demonstrably problematic assumption of ASCII as an appropriate encoding for communicating with operating system interfaces. This is a good approach for cases where network encoding interoperability is a more important concern than local encoding interoperability.

However, it comes at the cost of making CPython's encoding assumptions diverge from those of other locale-aware components in the same process, as well as those of components running in subprocesses that share the same environment.

It also requires changes to the internals of how CPython itself works, rather than using existing configuration settings that are supported by Python versions prior to Python 3.7.

Accordingly, this PEP proposes that independently of the UTF-8 mode proposed in PEP 540, the way the CPython implementation handles the default C locale be changed such that:

  • unless the new PYTHONCOERCECLOCALE environment variable is set to 0, the standalone CPython binary will automatically attempt to coerce the C locale to the first available locale out of C.UTF-8, C.utf8, or UTF-8
  • if the locale is successfully coerced, and PEP 540 is not accepted, then PYTHONIOENCODING (if not otherwise set) will be set to utf-8:surrogateescape.
  • if the locale is successfully coerced, and PEP 540 is accepted, then PYTHONUTF8 (if not otherwise set) will be set to 1
  • if the subsequent runtime initialization process detects that the legacy C locale remains active (e.g. none of C.UTF-8, C.utf8 or UTF-8 are available, or the runtime is embedded in an application other than the main CPython binary), locale coercion is not explicitly disabled, and the PYTHONUTF8 feature defined in PEP 540 is also disabled (or not implemented), it will emit a warning on stderr that use of the legacy C locale's default ASCII text encoding may cause various Unicode compatibility issues

With this change, any *nix platform that does not offer at least one of the C.UTF-8, C.utf8 or UTF-8 locales as part of its standard configuration would only be considered a fully supported platform for CPython 3.7+ deployments when either the new PYTHONUTF8 mode defined in PEP 540 is used, or else a suitable locale other than the default C locale is configured explicitly (e.g. en_AU.UTF-8, zh_CN.gb18030).

Redistributors (such as Linux distributions) with a narrower target audience than the upstream CPython development team may also choose to opt in to this locale coercion behaviour for the Python 3.6.x series by applying the necessary changes as a downstream patch when first introducing Python 3.6.0.


While the CPython interpreter is starting up, it may need to convert from the char * format to the wchar_t * format, or from one of those formats to PyUnicodeObject *, in a way that's consistent with the locale settings of the overall system. It handles these cases by relying on the operating system to do the conversion and then ensuring that the text encoding name reported by sys.getfilesystemencoding() matches the encoding used during this early bootstrapping process.

On Apple platforms (including both Mac OS X and iOS), this is straightforward, as Apple guarantees that these operations will always use UTF-8 to do the conversion.

On Windows, the limitations of the mbcs format used by default in these conversions proved sufficiently problematic that PEP 528 and PEP 529 were implemented to bypass the operating system supplied interfaces for binary data handling and force the use of UTF-8 instead.

On Android, many components, including CPython, already assume the use of UTF-8 as the system encoding, regardless of the locale setting. However, this isn't the case for all components, and the discrepancy can cause problems in some situations (for example, when using the GNU readline module [16]).

On non-Apple and non-Android *nix systems, these operations are handled using the C locale system in glibc, which has the following characteristics [4]:

  • by default, all processes start in the C locale, which uses ASCII for these conversions. This is almost never what anyone doing multilingual text processing actually wants (including CPython and C/C++ GUI frameworks).
  • calling setlocale(LC_ALL, "") reconfigures the active locale based on the locale categories configured in the current process environment
  • if the locale requested by the current environment is unknown, or no specific locale is configured, then the default C locale will remain active

The specific locale category that covers the APIs that CPython depends on is LC_CTYPE, which applies to "classification and conversion of characters, and to multibyte and wide characters" [5]. Accordingly, CPython includes the following key calls to setlocale:

  • in the main python binary, CPython calls setlocale(LC_ALL, "") to configure the entire C locale subsystem according to the process environment. It does this prior to making any calls into the shared CPython library
  • in Py_Initialize, CPython calls setlocale(LC_CTYPE, ""), such that the configured locale settings for that category always match those set in the environment. It does this unconditionally, and it doesn't revert the process state change in Py_Finalize

(This summary of the locale handling omits several technical details related to exactly where and when the text encoding declared as part of the locale settings is used - see PEP 540 for further discussion, as these particular details matter more when decoupling CPython from the declared C locale than they do when overriding the locale with one based on UTF-8)

These calls are usually sufficient to provide sensible behaviour, but they can still fail in the following cases:

  • SSH environment forwarding means that SSH clients may sometimes forward client locale settings to servers that don't have that locale installed. This leads to CPython running in the default ASCII-based C locale
  • some process environments (such as Linux containers) may not have any explicit locale configured at all. As with unknown locales, this leads to CPython running in the default ASCII-based C locale

The simplest way to deal with this problem for currently released versions of CPython is to explicitly set a more sensible locale when launching the application. For example:

LC_ALL=C.UTF-8 LANG=C.UTF-8 python3 ...

The C.UTF-8 locale is a full locale definition that uses UTF-8 for the LC_CTYPE category, and the same settings as the C locale for all other categories (including LC_COLLATE). It is offered by a number of Linux distributions (including Debian, Ubuntu, Fedora, Alpine and Android) as an alternative to the ASCII-based C locale.

Mac OS X and other *BSD systems have taken a different approach, and instead of offering a C.UTF-8 locale, instead offer a partial UTF-8 locale that only defines the LC_CTYPE category. On such systems, the preferred environmental locale adjustment is to set LC_CTYPE=UTF-8 rather than to set LC_ALL or LANG. [17]

In the specific case of Docker containers and similar technologies, the appropriate locale setting can be specified directly in the container image definition.

Another common failure case is developers specifying LANG=C in order to see otherwise translated user interface messages in English, rather than the more narrowly scoped LC_MESSAGES=C or LANGUAGE=en.

Relationship with other PEPs

This PEP shares a common problem statement with PEP 540 (improving Python 3's behaviour in the default C locale), but diverges markedly in the proposed solution:

  • PEP 540 proposes to entirely decouple CPython's default text encoding from the C locale system in that case, allowing text handling inconsistencies to arise between CPython and other locale-ware components running in the same process and in subprocesses. This approach aims to make CPython behave less like a locale-aware application, and more like locale-independent language runtimes like the JVM, .NET CLR, Go, Node.js, and Rust
  • this PEP proposes to override the legacy C locale with a more recently defined locale that uses UTF-8 as its default text encoding. This means that the text encoding override will apply not only to CPython, but also to any locale-aware extension modules loaded into the current process, as well as to locale-aware applications invoked in subprocesses that inherit their environment from the parent process. This approach aims to retain CPython's traditional strong support for integration with other locale-aware components while also actively helping to push forward the adoption and standardisation of the C.UTF-8 locale as a Unicode-aware replacement for the legacy C locale in the wider C/C++ ecosystem

After reviewing both PEPs, it became clear that they didn't actually conflict at a technical level, and the proposal in PEP 540 offered a superior option in cases where no suitable locale was available, as well as offering a better reference behaviour for platforms where the notion of a "locale encoding" doesn't make sense (for example, embedded systems running MicroPython rather than the CPython reference interpreter).

Meanwhile, this PEP offered improved compatibility with other locale-aware components, and an approach more amenable to being backported to Python 3.6 by downstream redistributors.

As a result, this PEP was amended to refer to PEP 540 as a complementary solution that offered improved behaviour both when locale coercion triggered, as well as when none of the standard UTF-8 based locales were available.

The availability of PEP 540 also meant that the LC_CTYPE=en_US.UTF-8 legacy fallback was removed from the list of UTF-8 locales tried as a coercion target, with CPython instead relying solely on the proposed PYTHONUTF8 mode in such cases.


While Linux container technologies like Docker, Kubernetes, and OpenShift are best known for their use in web service development, the related container formats and execution models are also being adopted for Linux command line application development. Technologies like Gnome Flatpak [7] and Ubunty Snappy [8] further aim to bring these same techniques to Linux GUI application development.

When using Python 3 for application development in these contexts, it isn't uncommon to see text encoding related errors akin to the following:

$ docker run --rm fedora:25 python3 -c 'print("ℙƴ☂ℌøἤ")'
Unable to decode the command from the command line:
UnicodeEncodeError: 'utf-8' codec can't encode character '\udce2' in position 7: surrogates not allowed
$ docker run --rm ncoghlan/debian-python python3 -c 'print("ℙƴ☂ℌøἤ")'
Unable to decode the command from the command line:
UnicodeEncodeError: 'utf-8' codec can't encode character '\udce2' in position 7: surrogates not allowed

Even though the same command is likely to work fine when run locally:

$ python3 -c 'print("ℙƴ☂ℌøἤ")'

The source of the problem can be seen by instead running the locale command in the three environments:

$ locale | grep -E 'LC_ALL|LC_CTYPE|LANG'
$ docker run --rm fedora:25 locale | grep -E 'LC_ALL|LC_CTYPE|LANG'
$ docker run --rm ncoghlan/debian-python locale | grep -E 'LC_ALL|LC_CTYPE|LANG'

In this particular example, we can see that the host system locale is set to "en_AU.UTF-8", so CPython uses UTF-8 as the default text encoding. By contrast, the base Docker images for Fedora and Debian don't have any specific locale set, so they use the POSIX locale by default, which is an alias for the ASCII-based default C locale.

The simplest way to get Python 3 (regardless of the exact version) to behave sensibly in Fedora and Debian based containers is to run it in the C.UTF-8 locale that both distros provide:

$ docker run --rm -e LANG=C.UTF-8 fedora:25 python3 -c 'print("ℙƴ☂ℌøἤ")'
$ docker run --rm -e LANG=C.UTF-8 ncoghlan/debian-python python3 -c 'print("ℙƴ☂ℌøἤ")'

$ docker run --rm -e LANG=C.UTF-8 fedora:25 locale | grep -E 'LC_ALL|LC_CTYPE|LANG'
$ docker run --rm -e LANG=C.UTF-8 ncoghlan/debian-python locale | grep -E 'LC_ALL|LC_CTYPE|LANG'

The Alpine Linux based Python images provided by Docker, Inc, already use the C.UTF-8 locale by default:

$ docker run --rm python:3 python3 -c 'print("ℙƴ☂ℌøἤ")'
$ docker run --rm python:3 locale | grep -E 'LC_ALL|LC_CTYPE|LANG'

Similarly, for custom container images (i.e. those adding additional content on top of a base distro image), a more suitable locale can be set in the image definition so everything just works by default. However, it would provide a much nicer and more consistent user experience if CPython were able to just deal with this problem automatically rather than relying on redistributors or end users to handle it through system configuration changes.

While the glibc developers are working towards making the C.UTF-8 locale universally available for use by glibc based applications like CPython [6], this unfortunately doesn't help on platforms that ship older versions of glibc without that feature, and also don't provide C.UTF-8 as an on-disk locale the way Debian and Fedora do. For these platforms, the mechanism proposed in PEP 540 at least allows CPython itself to behave sensibly, albeit without any mechanism to get other C/C++ components that decode binary streams as text to do the same.

Design Principles

The above motivation leads to the following core design principles for the proposed solution:

  • if a locale other than the default C locale is explicitly configured, we'll continue to respect it
  • if we're changing the locale setting without an explicit config option, we'll emit a warning on stderr that we're doing so rather than silently changing the process configuration. This will alert application and system integrators to the change, even if they don't closely follow the PEP process or Python release announcements. However, to minimize the chance of introducing new problems for end users, we'll do this without using the warnings system, so even running with -Werror won't turn it into a runtime exception
  • any changes made will use existing configuration options

Minimizing the negative impact on systems currently correctly configured to use GB-18030 or another partially ASCII compatible universal encoding leads to an additional design principle:

  • if a UTF-8 based Linux container is run on a host that is explicitly configured to use a non-UTF-8 encoding, and tries to exchange locally encoded data with that host rather than exchanging explicitly UTF-8 encoded data, CPython will endeavour to correctly round-trip host provided data that is concatenated or split solely at common ASCII compatible code points, but may otherwise emit nonsensical results.


To better handle the cases where CPython would otherwise end up attempting to operate in the C locale, this PEP proposes that CPython automatically attempt to coerce the legacy C locale to a UTF-8 based locale when it is run as a standalone command line application.

It further proposes to emit a warning on stderr if the legacy C locale is in effect at the point where the language runtime itself is initialized, the explicit environmental flag to disable locale coercion is not set, and the PEP 540 UTF-8 encoding override is also disabled, in order to warn system and application integrators that they're running CPython in an unsupported configuration.

Legacy C locale coercion in the standalone Python interpreter binary

When run as a standalone application, CPython has the opportunity to reconfigure the C locale before any locale dependent operations are executed in the process.

This means that it can change the locale settings not only for the CPython runtime, but also for any other locale-aware components running in the current process (e.g. as part of extension modules), as well as in subprocesses that inherit their environment from the current process.

After calling setlocale(LC_ALL, "") to initialize the locale settings in the current process, the main interpreter binary will be updated to include the following call:

const char *ctype_loc = setlocale(LC_CTYPE, NULL);

This cryptic invocation is the API that C provides to query the current locale setting without changing it. Given that query, it is possible to check for exactly the C locale with strcmp:

ctype_loc != NULL && strcmp(ctype_loc, "C") == 0 # true only in the C locale

This call also returns "C" when either no particular locale is set, or the nominal locale is set to an alias for the C locale (such as POSIX).

Given this information, CPython can then attempt to coerce the locale to one that uses UTF-8 rather than ASCII as the default encoding.

Three such locales will be tried:

  • C.UTF-8 (available at least in Debian, Ubuntu, and Fedora 25+, and expected to be available by default in a future version of glibc)
  • C.utf8 (available at least in HP-UX)
  • UTF-8 (available in at least some *BSD variants)

For C.UTF-8 and C.utf8, the coercion will be implemented by actually setting the LANG and LC_ALL environment variables to the candidate locale name, such that future calls to setlocale() will see them, as will other components looking for those settings (such as GUI development frameworks).

For the platforms where it is defined, UTF-8 is a partial locale that only defines the LC_CTYPE category. Accordingly, only the LC_CTYPE environment variable would be set when using this fallback option.

To adjust automatically to future changes in locale availability, these checks will be implemented at runtime on all platforms other than Mac OS X and Windows, rather than attempting to determine which locales to try at compile time.

If the locale settings are changed successfully, and the PYTHONIOENCODING environment variable is currently unset, then it will be forced to PYTHONIOENCODING=utf-8:surrogateescape.

When this locale coercion is activated, the following warning will be printed on stderr, with the warning containing whichever locale was successfully configured:

Python detected LC_CTYPE=C: LC_ALL & LANG coerced to C.UTF-8 (set another
locale or PYTHONCOERCECLOCALE=0 to disable this locale coercion behaviour).

When falling back to the UTF-8 locale, the message would be slightly different:

Python detected LC_CTYPE=C: LC_CTYPE coerced to UTF-8 (set another locale
or PYTHONCOERCECLOCALE=0 to disable this locale coercion behaviour).

In combination with PEP 540, this locale coercion will mean that the standard Python binary and locale-aware extensions should once again "just work" in the three main failure cases we're aware of (missing locale settings, SSH forwarding of unknown locales, and developers explicitly requesting LANG=C), as long as the target platform provides at least one of the candidate UTF-8 based environments.

If none of the candidate locales are successfully configured, then initialization will continue in the C locale and the Unicode compatibility warning described in the next section will be emitted just as it would for any other application.

If PYTHONCOERCECLOCALE=0 is explicitly set, initialization will continue in the C locale and the Unicode compatibility warning described in the next section will be automatically suppressed.

The interpreter will always check for the PYTHONCOERCECLOCALE environment variable at startup (even when running under the -E or -I switches), as the locale coercion check necessarily takes place before any command line argument processing. For consistency, the runtime check to determine whether or not to suppress the locale compatibility warning will be similarly independent of these settings.

Changes to the runtime initialization process

By the time that Py_Initialize is called, arbitrary locale-dependent operations may have taken place in the current process. This means that by the time it is called, it is too late to switch to a different locale - doing so would introduce inconsistencies in decoded text, even in the context of the standalone Python interpreter binary.

Accordingly, when Py_Initialize is called and CPython detects that the configured locale is still the default C locale, PYTHONCOERCECLOCALE=0 is set, and the PYTHONUTF8 feature from PEP 540 is disabled (or not implemented), the following warning will be issued:

Python runtime initialized with LC_CTYPE=C (a locale with default ASCII
encoding), which may cause Unicode compatibility problems. Using C.UTF-8,
C.utf8, or UTF-8 (if available) as alternative Unicode-compatible
locales is recommended.

In this case, no actual change will be made to the locale settings.

Instead, the warning informs both system and application integrators that they're running Python 3 in a configuration that we don't expect to work properly.

The second sentence providing recommendations may eventually be conditionally compiled based on the operating system (e.g. recommending LC_CTYPE=UTF-8 on *BSD systems), but the initial implementation will just use the common generic message shown above.

New build-time configuration options

While both of the above behaviours would be enabled by default, they would also have new associated configuration options and preprocessor definitions for the benefit of redistributors that want to override those default settings.

The locale coercion behaviour would be controlled by the flag --with[out]-c-locale-coercion, which would set the PY_COERCE_C_LOCALE preprocessor definition.

The locale warning behaviour would be controlled by the flag --with[out]-c-locale-warning, which would set the PY_WARN_ON_C_LOCALE preprocessor definition.

On platforms where they would have no effect (e.g. Mac OS X, iOS, Android, Windows) these preprocessor variables would always be undefined.

Platform Support Changes

A new "Legacy C Locale" section will be added to PEP 11 that states:

  • as of CPython 3.7, *nix platforms are expected to provide at least one of C.UTF-8 (full locale), C.utf8 (full locale) or UTF-8 ( LC_CTYPE-only locale) as an alternative to the legacy C locale. Any Unicode related integration problems that occur only in that locale and cannot be reproduced in an appropriately configured non-ASCII locale will be closed as "won't fix".

If PEP 540 is also implemented, then this section would instead state:

  • as of CPython 3.7, the legacy C locale is only supported when operating in "UTF-8" mode. Any Unicode handling issues that occur only in that locale and cannot be reproduced in an appropriately configured non-ASCII locale will be closed as "won't fix"
  • as of CPython 3.7, *nix platforms are expected to provide at least one of C.UTF-8 (full locale), C.utf8 (full locale) or UTF-8 ( LC_CTYPE-only locale) as an alternative to the legacy C locale. Any Unicode related integration problems with other locale-aware components that occur only in that locale and cannot be reproduced in an appropriately configured non-ASCII locale will be closed as "won't fix".


Improving the handling of the C locale

It has been clear for some time that the C locale's default encoding of ASCII is entirely the wrong choice for development of modern networked services. Newer languages like Rust and Go have eschewed that default entirely, and instead made it a deployment requirement that systems be configured to use UTF-8 as the text encoding for operating system interfaces. Similarly, Node.js assumes UTF-8 by default (a behaviour inherited from the V8 JavaScript engine) and requires custom build settings to indicate it should use the system locale settings for locale-aware operations. Both the JVM and the .NET CLR use UTF-16-LE as their primary encoding for passing text between applications and the underlying platform.

The challenge for CPython has been the fact that in addition to being used for network service development, it is also extensively used as an embedded scripting language in larger applications, and as a desktop application development language, where it is more important to be consistent with other locale-aware components sharing the same process, as well as with the user's desktop locale settings, than it is with the emergent conventions of modern network service development.

The core premise of this PEP is that for all of these use cases, the assumption of ASCII implied by the default "C" locale is the wrong choice, and furthermore that the following assumptions are valid:

  • in desktop application use cases, the process locale will already be configured appropriately, and if it isn't, then that is an operating system or embedding application level problem that needs to be reported to and resolved by the operating system provider or application developer
  • in network service development use cases (especially those based on Linux containers), the process locale may not be configured at all, and if it isn't, then the expectation is that components will impose their own default encoding the way Rust, Go and Node.js do, rather than trusting the legacy C default encoding of ASCII the way CPython currently does

Defaulting to "surrogateescape" error handling on the standard IO streams

By coercing the locale away from the legacy C default and its assumption of ASCII as the preferred text encoding, this PEP also disables the implicit use of the "surrogateescape" error handler on the standard IO streams that was introduced in Python 3.5 ([15]), as well as the automatic use of surrogateescape when operating in PEP 540's UTF-8 mode.

Rather than introducing yet another configuration option to address that, this PEP proposes to use the existing PYTHONIOENCODING setting to ensure that the surrogateescape handler is enabled when the interpreter is required to make assumptions regarding the expected filesystem encoding.

The aim of this behaviour is to attempt to ensure that operating system provided text values are typically able to be transparently passed through a Python 3 application even if it is incorrect in assuming that that text has been encoded as UTF-8.

In particular, GB 18030 [12] is a Chinese national text encoding standard that handles all Unicode code points, that is formally incompatible with both ASCII and UTF-8, but will nevertheless often tolerate processing as surrogate escaped data - the points where GB 18030 reuses ASCII byte values in an incompatible way are likely to be invalid in UTF-8, and will therefore be escaped and opaque to string processing operations that split on or search for the relevant ASCII code points. Operations that don't involve splitting on or searching for particular ASCII or Unicode code point values are almost certain to work correctly.

Similarly, Shift-JIS [13] and ISO-2022-JP [14] remain in widespread use in Japan, and are incompatible with both ASCII and UTF-8, but will tolerate text processing operations that don't involve splitting on or searching for particular ASCII or Unicode code point values.

As an example, consider two files, one encoded with UTF-8 (the default encoding for en_AU.UTF-8), and one encoded with GB-18030 (the default encoding for zh_CN.gb18030):

$ python3 -c 'open("utf8.txt", "wb").write("ℙƴ☂ℌøἤ\n".encode("utf-8"))'
$ python3 -c 'open("gb18030.txt", "wb").write("ℙƴ☂ℌøἤ\n".encode("gb18030"))'

On disk, we can see that these are two very different files:

$ python3 -c 'print("UTF-8:  ", open("utf8.txt", "rb").read().strip()); \
              print("GB18030:", open("gb18030.txt", "rb").read().strip())'
UTF-8:   b'\xe2\x84\x99\xc6\xb4\xe2\x98\x82\xe2\x84\x8c\xc3\xb8\xe1\xbc\xa4\n'
GB18030: b'\x816\xbd6\x810\x9d0\x817\xa29\x816\xbc4\x810\x8b3\x816\x8d6\n'

That nevertheless can both be rendered correctly to the terminal as long as they're decoded prior to printing:

$ python3 -c 'print("UTF-8:  ", open("utf8.txt", "r", encoding="utf-8").read().strip()); \
              print("GB18030:", open("gb18030.txt", "r", encoding="gb18030").read().strip())'
UTF-8:   ℙƴ☂ℌøἤ
GB18030: ℙƴ☂ℌøἤ

By contrast, if we just pass along the raw bytes, as cat and similar C/C++ utilities will tend to do:

$ LANG=en_AU.UTF-8 cat utf8.txt gb18030.txt

Even setting a specifically Chinese locale won't help in getting the GB-18030 encoded file rendered correctly:

$ LANG=zh_CN.gb18030 cat utf8.txt gb18030.txt

The problem is that the terminal encoding setting remains UTF-8, regardless of the nominal locale. A GB18030 terminal can be emulated using the iconv utility:

$ cat utf8.txt gb18030.txt | iconv -f GB18030 -t UTF-8

This reverses the problem, such that the GB18030 file is rendered correctly, but the UTF-8 file has been converted to unrelated hanzi characters, rather than the expected rendering of "Python" as non-ASCII characters.

With the emulated GB18030 terminal encoding, assuming UTF-8 in Python results in both files being displayed incorrectly:

$ python3 -c 'print("UTF-8:  ", open("utf8.txt", "r", encoding="utf-8").read().strip()); \
              print("GB18030:", open("gb18030.txt", "r", encoding="gb18030").read().strip())' \
  | iconv -f GB18030 -t UTF-8
UTF-8:   鈩櫰粹槀鈩屆羔激
GB18030: 鈩櫰粹槀鈩屆羔激

However, setting the locale correctly means that the emulated GB18030 terminal now displays both files as originally intended:

$ LANG=zh_CN.gb18030 \
  python3 -c 'print("UTF-8:  ", open("utf8.txt", "r", encoding="utf-8").read().strip()); \
              print("GB18030:", open("gb18030.txt", "r", encoding="gb18030").read().strip())' \
  | iconv -f GB18030 -t UTF-8
UTF-8:   ℙƴ☂ℌøἤ
GB18030: ℙƴ☂ℌøἤ

The rationale for retaining surrogateescape as the default IO encoding is that it will preserve the following helpful behaviour in the C locale:

$ cat gb18030.txt \
  | LANG=C python3 -c "import sys; print(sys.stdin.read())" \
  | iconv -f GB18030 -t UTF-8

Rather than reverting to the exception seen when a UTF-8 based locale is explicitly configured:

$ cat gb18030.txt \
  | python3 -c "import sys; print(sys.stdin.read())" \
  | iconv -f GB18030 -t UTF-8
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/usr/lib64/python3.5/codecs.py", line 321, in decode
    (result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x81 in position 0: invalid start byte

Note: an alternative to setting PYTHONIOENCODING as the PEP currently proposes would be to instead always default to surrogateescape on the standard streams, and require the use of PYTHONIOENCODING=:strict to request text encoding validation during stream processing. Adopting such an approach would bring Python 3 more into line with typical C/C++ tools that pass along the raw bytes without checking them for conformance to their nominal encoding, and would hence also make the last example display the desired output:

$ cat gb18030.txt \
  | PYTHONIOENCODING=:surrogateescape python3 -c "import sys; print(sys.stdin.read())" \
  | iconv -f GB18030 -t UTF-8

However, such a change would have broader implications than the C locale specific changes currently proposed, so it is considered out of scope for this PEP.

Dropping official support for ASCII based text handling in the legacy C locale

We've been trying to get strict bytes/text separation to work reliably in the legacy C locale for over a decade at this point. Not only haven't we been able to get it to work, neither has anyone else - the only viable alternatives identified have been to pass the bytes along verbatim without eagerly decoding them to text (C/C++, Python 2.x, Ruby, etc), or else to ignore the nominal C/C++ locale encoding entirely and assume the use of either UTF-8 (PEP 540, Rust, Go, Node.js, etc) or UTF-16-LE (JVM, .NET CLR).

While this PEP ensures that developers that genuinely need to do so can still opt-in to running their Python code in the legacy C locale (either by setting PYTHONCOERCECLOCALE=0 or running a custom build that sets --without-c-locale-coercion), it also makes it clear that we don't expect Python 3's Unicode handling to be completely reliable in that configuration, and the recommended alternative is to use a more appropriate locale setting (or PEP 540's UTF-8 mode, if that is available).

Providing implicit locale coercion only when running standalone

Over the course of Python 3.x development, multiple attempts have been made to improve the handling of incorrect locale settings at the point where the Python interpreter is initialised. The problem that emerged is that this is ultimately too late in the interpreter startup process - data such as command line arguments and the contents of environment variables may have already been retrieved from the operating system and processed under the incorrect ASCII text encoding assumption well before Py_Initialize is called.

The problems created by those inconsistencies were then even harder to diagnose and debug than those created by believing the operating system's claim that ASCII was a suitable encoding to use for operating system interfaces. This was the case even for the default CPython binary, let alone larger C/C++ applications that embed CPython as a scripting engine.

The approach proposed in this PEP handles that problem by moving the locale coercion as early as possible in the interpreter startup sequence when running standalone: it takes place directly in the C-level main() function, even before calling in to the Py_Main()` library function that implements the features of the CPython interpreter CLI.

The Py_Initialize API then only gains an explicit warning (emitted on stderr) when it detects use of the C locale, and relies on the embedding application to specify something more reasonable.

Querying LC_CTYPE for C locale detection

LC_CTYPE is the actual locale category that CPython relies on to drive the implicit decoding of environment variables, command line arguments, and other text values received from the operating system.

As such, it makes sense to check it specifically when attempting to determine whether or not the current locale configuration is likely to cause Unicode handling problems.

Setting both LANG & LC_ALL for C.UTF-8 locale coercion

Python is often used as a glue language, integrating other C/C++ ABI compatible components in the current process, and components written in arbitrary languages in subprocesses.

Setting LC_ALL to C.UTF-8 imposes a locale setting override on all locale-aware components in the current process and in any subprocesses that inherit the current environment. This is important to handle cases where the problem has arisen from a setting like LC_CTYPE=UTF-8 being provided on a system where no UTF-8 locale is defined (e.g. when a Mac OS X ssh client is configured to forward locale settings, and the user logs into a Linux server).

Setting LANG to C.UTF-8 ensures that even components that only check the LANG fallback for their locale settings will still use C.UTF-8.

Together, these should ensure that when the locale coercion is activated, the switch to the C.UTF-8 locale will be applied consistently across the current process and any subprocesses that inherit the current environment.

Allowing restoration of the legacy behaviour

The CPython command line interpreter is often used to investigate faults that occur in other applications that embed CPython, and those applications may still be using the C locale even after this PEP is implemented.

Providing a simple on/off switch for the locale coercion behaviour makes it much easier to reproduce the behaviour of such applications for debugging purposes, as well as making it easier to reproduce the behaviour of older 3.x runtimes even when running a version with this change applied.


The reference implementation is being developed in the pep538-coerce-c-locale feature branch [18] in Nick Coghlan's fork of the CPython repository on GitHub. A work-in-progress PR is available at [20].

This reference implementation covers not only the enhancement request in issue 28180 [1], but also the Android compatibility fixes needed to resolve issue 28997 [16].

NOTE: The reference implementation is currently missing the configure.ac checks that are needed to ensure that PY_COERCE_C_LOCALE and PY_WARN_ON_C_LOCALE are always undefined on Mac OS X.

Backporting to earlier Python 3 releases

Backporting to Python 3.6.x

If this PEP is accepted for Python 3.7, redistributors backporting the change specifically to their initial Python 3.6.x release will be both allowed and encouraged. However, such backports should only be undertaken either in conjunction with the changes needed to also provide a suitable locale by default, or else specifically for platforms where such a locale is already consistently available.

At least the Fedora project is planning to pursue this approach for the upcoming Fedora 26 release [19].

Backporting to other 3.x releases

While the proposed behavioural change is seen primarily as a bug fix addressing Python 3's current misbehaviour in the default ASCII-based C locale, it still represents a reasonably significant change in the way CPython interacts with the C locale system. As such, while some redistributors may still choose to backport it to even earlier Python 3.x releases based on the needs and interests of their particular user base, this wouldn't be encouraged as a general practice.

However, configuring Python 3 environments (such as base container images) to use these configuration settings by default is both allowed and recommended.


The locale coercion approach proposed in this PEP is inspired directly by Armin Ronacher's handling of this problem in the click command line utility development framework [2]:

$ LANG=C python3 -c 'import click; cli = click.command()(lambda:None); cli()'
Traceback (most recent call last):
RuntimeError: Click will abort further execution because Python 3 was
configured to use ASCII as encoding for the environment.  Either run this
under Python 2 or consult http://click.pocoo.org/python3/ for mitigation

This system supports the C.UTF-8 locale which is recommended.
You might be able to resolve your issue by exporting the
following environment variables:

    export LC_ALL=C.UTF-8
    export LANG=C.UTF-8

The change was originally proposed as a downstream patch for Fedora's system Python 3.6 package [3], and then reformulated as a PEP for Python 3.7 with a section allowing for backports to earlier versions by redistributors.

The initial draft was posted to the Python Linux SIG for discussion [10] and then amended based on both that discussion and Victor Stinner's work in PEP 540 [11].

The "ℙƴ☂ℌøἤ" string used in the Unicode handling examples throughout this PEP is taken from Ned Batchelder's excellent "Pragmatic Unicode" presentation [9].

Stephen Turnbull has long provided valuable insight into the text encoding handling challenges he regularly encounters at the University of Tsukuba (筑波大学).


[1]CPython: sys.getfilesystemencoding() should default to utf-8 (http://bugs.python.org/issue28180)
[2]Locale configuration required for click applications under Python 3 (http://click.pocoo.org/5/python3/#python-3-surrogate-handling)
[3]Fedora: force C.UTF-8 when Python 3 is run under the C locale (https://bugzilla.redhat.com/show_bug.cgi?id=1404918)
[4]GNU C: How Programs Set the Locale ( https://www.gnu.org/software/libc/manual/html_node/Setting-the-Locale.html)
[5]GNU C: Locale Categories (https://www.gnu.org/software/libc/manual/html_node/Locale-Categories.html)
[6]glibc C.UTF-8 locale proposal (https://sourceware.org/glibc/wiki/Proposals/C.UTF-8)
[7]GNOME Flatpak (http://flatpak.org/)
[8]Ubuntu Snappy (https://www.ubuntu.com/desktop/snappy)
[9]Pragmatic Unicode (http://nedbatchelder.com/text/unipain.html)
[10]linux-sig discussion of initial PEP draft (https://mail.python.org/pipermail/linux-sig/2017-January/000014.html)
[11]Feedback notes from linux-sig discussion and PEP 540 (https://github.com/python/peps/issues/171)
[12]GB 18030 (https://en.wikipedia.org/wiki/GB_18030)
[13]Shift-JIS (https://en.wikipedia.org/wiki/Shift_JIS)
[14]ISO-2022 (https://en.wikipedia.org/wiki/ISO/IEC_2022)
[15]Use "surrogateescape" error handler for sys.stdin and sys.stdout on UNIX for the C locale (https://bugs.python.org/issue19977)
[16]test_readline.test_nonascii fails on Android (http://bugs.python.org/issue28997)
[17]UTF-8 locale discussion on "locale.getdefaultlocale() fails on Mac OS X with default language set to English" (http://bugs.python.org/issue18378#msg215215)
[18]GitHub branch diff for ncoghlan:pep538-coerce-c-locale (https://github.com/python/cpython/compare/master...ncoghlan:pep538-coerce-c-locale)
[19]Fedora 26 change proposal for locale coercion backport (https://fedoraproject.org/wiki/Changes/python3_c.utf-8_locale)
[20]GitHub pull request for the reference implementation (https://github.com/python/cpython/pull/659)